Related
Got the new K1 tab, obviously without a charger (thought mine would be good enough).
Can someone recommended a charger (wire and/or plug) that wont take 5 hours to charge my tablet.
Thanks
iPad chargers are very close if not the same as the stock charger
Sony has good quality chargers.
You really want to look at the specs of the original and match it as close as possible 5.2v, 2.1a
Sent from my SHIELD Tablet using Tapatalk
ou2mame said:
You really want to look at the specs of the original and match it as close as possible 5.2v, 2.1a
Sent from my SHIELD Tablet using Tapatalk
Click to expand...
Click to collapse
Thank you! I actually started using my old Galaxy S5 wire and wall plug, and now im at 60% battery with an estimated 56 minute charging time. I'd say thats much better than yesterday.
I had a problem with a 2.4a 5v charger making my screen unresponsive while charging so I just use the original and it works great. Charges pretty quick.
Sent from my HTC M9 using Tapatalk
ou2mame said:
I had a problem with a 2.4a 5v charger making my screen unresponsive while charging so I just use the original and it works great. Charges pretty quick.
Sent from my HTC M9 using Tapatalk
Click to expand...
Click to collapse
Problem is, I can't find any original chargers! I think I'm spoilt by how fast my phone charges but I'm sure 5hrs isn't a normal charge time
Basic math is if it's a 4000mah battery, at 1000mah, it should take 4hrs.
Sent from my HTC M9 using Tapatalk
ou2mame said:
Basic math is if it's a 4000mah battery, at 1000mah, it should take 4hrs.
Sent from my HTC M9 using Tapatalk
Click to expand...
Click to collapse
Yeah. I had one combo tell me 9hrs ?
Lol yeah.. There's an app called ampere that'll measure the actual charge rate. I don't know how accurate it is, but I did notice significant differences.. My bluetooth headset charger shoes as 150mah, and the Nvidia one shows 1900mah. My htc charger showed 1200. So there were differences even if not exact, they represent the higher rates of the advertised amps.
Sent from my HTC M9 using Tapatalk
ou2mame said:
Lol yeah.. There's an app called ampere that'll measure the actual charge rate. I don't know how accurate it is, but I did notice significant differences.. My bluetooth headset charger shoes as 150mah, and the Nvidia one shows 1900mah. My htc charger showed 1200. So there were differences even if not exact, they represent the higher rates of the advertised amps.
Sent from my HTC M9 using Tapatalk
Click to expand...
Click to collapse
That's quite useful. I'll give it a go tomorrow thanks for the information
Any luck with the chargers? I have no idea which one to get.
I just picked up a Tronsmart three port quick charge charger for $10 during black Friday pricing on Amazon. Works great, charges from 20% to full in about 2 hours.
https://www.amazon.com/dp/B00ZORW23C/ref=cm_sw_r_awd_R65wwbJWT31ZD
Can't wait to get mine. Couldn't pass up that $199 price. Just what I was looking for, a nice 8" tablet, perfect travel size, imho.
Bought a couple of accessories as well.
Case
http://amzn.com/B00MN98ATE (cheap, reviews seemed okay)
Screen Protector (I have one of these on my Note 5, not crazy about the haloing, but it does the job)
http://amzn.com/B00TD9G9R2
Charger (I already own one and have had good luck with it, and just wanted another one dedicated to the tablet)
http://amzn.com/B00QEX83LA
You could pick up a quick charger from Motorola and flash the Bit-O kernel with QC support,
TheNinja370 said:
Can't wait to get mine. Couldn't pass up that $199 price. Just what I was looking for, a nice 8" tablet, perfect travel size, imho.
Bought a couple of accessories as well.
Case
http://amzn.com/B00MN98ATE (cheap, reviews seemed okay)
Screen Protector (I have one of these on my Note 5, not crazy about the haloing, but it does the job)
http://amzn.com/B00TD9G9R2
Charger (I already own one and have had good luck with it, and just wanted another one dedicated to the tablet)
http://amzn.com/B00QEX83LA
Click to expand...
Click to collapse
Hate to go off topic, but does that case have the stylus cutout? If it does, is it annoying?
Nexus 7 (2012) Charger works well. 5V, 2A.
I'm about 3h for a full charge.
SeekingSight said:
Hate to go off topic, but does that case have the stylus cutout? If it does, is it annoying?
Click to expand...
Click to collapse
I don't see anything that looks like a cutout for a stylus.
I've had my Shield K1 tablet for about a week now. Been charging with my S6 charger but wasn't charging properly, never got to 100%, it froze at 97% saying 4 minutes left to charge.. Just bought an Aukey Quick Charge 2.0 42W 3 Port wall charger and its been on charge for about 8 hours and it seems to be charging extremely slowly. I checked it a couple hours ago and it was on 60% now its only at 70%. Not good.
I am using an adaptive voltage wall charger 3-30V with my Shield 2017 USB cord. I am testing it currently, but ampere stats thus far are:
Min:1440mah
MAX:1640mah
over 20 minutes I'm working on developing a kernel but the k1 is a hell of a source considering I'm used to qualcomm. I'll keep ya posted. I'll also try quick charge 2.0 and 3.0 however Nvidia seems to restrict their temperature rather than the voltage? Any help with their stock source kernel would be greatly appreciated. Thanks
Anyone know how the Pixel will do with third party but high quality chargers such as Anker or Choetech?
I don't think anyone will have concrete evidence until we get to try it out. I would assume if it works with the 5x/6p it should be the same.
Sent from my Nexus 5X using XDA-Developers mobile app
km8j said:
Anyone know how the Pixel will do with third party but high quality chargers such as Anker or Choetech?
Click to expand...
Click to collapse
Google has a usb-pd belkin car charger on their website and recommends it for the pixel, so it should be compatible. I would expect that any charger that supports usb-pd will work
Sent from my GT-I9505G using XDA Free mobile app
Matridom said:
Google has a usb-pd belkin car charger on their website and recommends it for the pixel, so it should be compatible. I would expect that any charger that supports usb-pd will work
Click to expand...
Click to collapse
What is USB pd? I'm sure tons of chargers will work but there was all that drama recently with certain USB C chargers not being safe
km8j said:
What is USB pd? I'm sure tons of chargers will work but there was all that drama recently with certain USB C chargers not being safe
Click to expand...
Click to collapse
USB power delivery. It's the standard that the pixel uses for quick charging.
http://www.usb.org/developers/powerdelivery/
If you don't have the right cable and charger, the phone could draw too much power and kill the usb port or burn out the charger. If you use a quality cable, you should be fine even for old chargers, just won't charge as fast
Sent from my GT-I9505G using XDA Free mobile app
I believe QC3 chargers will work on this device. I can rapid charge my Pixel C with a QC3 charger, at 5v3a. QC3 also supports the 9v2a charge that these phones need.
Of course I will test and update when I receive it, but if its anything like the Pixel C tablet, it will work.
As for the cables, anything on amazon with 4-5 stars will probably be up to spec. You are looking to make sure it has a 56k Ohm Resistor
There was a bunch of drama last year. Even cables with the right resistor wound up potentially being incompatible
Bump
Good ol' Benson (and another dude named Nathan) have put together a list of recommended charging accessories:
https://docs.google.com/spreadsheets/d/1vnpEXfo2HCGADdd9G2x9dMDWqENiY2kgBJUu29f_TX8/pubhtml
Make note that the Nexus 6p and 5x chargers aren't recommended at all.
Sent from my Nexus 6P using Tapatalk
seezar said:
Make note that the Nexus 6p and 5x chargers aren't recommended at all.
Click to expand...
Click to collapse
Yea this is really flipping confusing. Why all the drama? I have a bunch of Choetech cables and a charger that Jensen has previously said are safe but how do I know if they are safe with THIS phone if he hasn't explicitly tested?
How do I know if these, which I already have, are ok?
https://www.amazon.com/gp/product/B01I97L5R2
https://www.amazon.com/gp/product/B019Q5WT6W
https://www.amazon.com/gp/product/B01DDW9RNC
https://www.amazon.com/gp/product/B01DEJ7KE2
I'm way more concerned about safety than charge speed.
Some great Info here:
https://plus.google.com/+BensonLeung
chazall1 said:
Some great Info here:
https://plus.google.com/+BensonLeung
Click to expand...
Click to collapse
Yea I know. I'm responding to posts above
km8j said:
How do I know if these, which I already have, are ok?
https://www.amazon.com/gp/product/B01I97L5R2
https://www.amazon.com/gp/product/B019Q5WT6W
https://www.amazon.com/gp/product/B01DDW9RNC
https://www.amazon.com/gp/product/B01DEJ7KE2
I'm way more concerned about safety than charge speed.
Click to expand...
Click to collapse
Bump. While I will pick up some of the recommended cables from Bensen, I have a ton of these floating around. So my questions...
1) Are these SAFE with the Pixel?
2) Does it matter what charger is on the other side for safety?
I have a coupon from HTC for their accessories was thinking of picking up a couple of the USB A to C cables
would that be safe?
http://www.htc.com/us/accessories/usb-type-c-cable/#!pid=htc-10
daewond3r said:
Good ol' Benson (and another dude named Nathan) have put together a list of recommended charging accessories:
https://docs.google.com/spreadsheets/d/1vnpEXfo2HCGADdd9G2x9dMDWqENiY2kgBJUu29f_TX8/pubhtml
Click to expand...
Click to collapse
So the cheapest power brick that gets a 3 and charges at full power is $35 from Google. The only car charger that has a 3 and charges at full power is from Belkin/Google, coming soon at $45. There are no battery packs that receive a 3 and charge at full power. Sheesh. This kind of sucks right now.
Sent from my SM-G925V using Tapatalk
joshm.1219 said:
So the cheapest power brick that gets a 3 and charges at full power is $35 from Google. The only car charger that has a 3 and charges at full power is from Belkin/Google, coming soon at $45. There are no battery packs that receive a 3 and charge at full power. Sheesh. This kind of sucks right now.
Sent from my SM-G925V using Tapatalk
Click to expand...
Click to collapse
I dont think 3 is only thing thats safe though....
km8j said:
How do I know if these, which I already have, are ok?
https://www.amazon.com/gp/product/B01I97L5R2
https://www.amazon.com/gp/product/B019Q5WT6W
https://www.amazon.com/gp/product/B01DDW9RNC
https://www.amazon.com/gp/product/B01DEJ7KE2
I'm way more concerned about safety than charge speed.
Click to expand...
Click to collapse
km8j said:
Bump. While I will pick up some of the recommended cables from Bensen, I have a ton of these floating around. So my questions...
1) Are these SAFE with the Pixel?
2) Does it matter what charger is on the other side for safety?
Click to expand...
Click to collapse
km8j said:
I dont think 3 is only thing thats safe though....
Click to expand...
Click to collapse
The only batteries that charge at full power got 0 and -3 ratings, the only other car charger at full power is $40 from Verizon.
Sent from my SM-G925V using Tapatalk
I read that this phone doesn't have fast quick charge 2.0 and i tried to charge my phone with a Aukey charger and it's true, it doesn't have it but i tried with the original charger of my other phone (Moto X Pure) and an adapter to use micro-usb and surprise!!!
I use Ampere to measure the Max USB mA and the result was 1770Ma but when it is around 95% of battery it reduces to 660Ma.
Here is a screenshot of the charging performance. ( it says Pixel XL because of the modification on the Build Pro to have Google Asistent
I use CM14 and my phone it's not hot while charging.
It doesn't have fast charge no matter what adapter you use. 1770ma is normal as the stock adapter is 2 amps.
Wilsonn said:
It doesn't have fast charge no matter what adapter you use. 1770ma is normal as the stock adapter is 2 amps.
Click to expand...
Click to collapse
Something different it has because the original charger it's not too fast as it is.
Proof or didn't happen
Sent from my ONE A2005 using Tapatalk
fburgos said:
Proof or didn't happen
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
There you go!
That's the same current I get on stock or orzly cable on any of the 2amp chargers I have, and takes about two hours to get from 15% to 100%
How much time yours take?
Sent from my ONE A2005 using Tapatalk
Anyone else having any problems with charging? My supplied QC 3.0 charger has developed issues - it usually charges OK, but if it has been recently used it seems to completely stop working for a while. I think that's a problem with the charger rather than the phone because when it stops working it also won't charge other devices. I also have a problem with an Aukey QC3.0 power bank that I recently bought. It charges my phone fine if I turn off fast charging in battery settings on the phone, but if fast charging is on it only charges while the screen is on. As soon as the screen goes off, it completely stops charging (and the lock screen comes back on).
Both the above problems have occurred regardless of which ROM I have installed.
Edit: power bank is actually working now, but that might be because phone battery is already over 90% so it is not trying to draw fast charge levels of current. Will have to try again when the battery is below 70%.
Hello. My phone is also fast charging only while screen is off but it's rather normal. The first issue I did not encounter. I have so far only supplied charger. Of course quick charging works more efficiently at lower levels of battery. I have a USB meter that shows max about 21 Watts approx 7.8 V x 2.8 A.
Regards Filozof71
Sent from my Le X820 using Tapatalk
Filozof71 said:
Hello. My phone is also fast charging only while screen is off but it's rather normal. The first issue I did not encounter. I have so far only supplied charger. Of course quick charging works more efficiently at lower levels of battery. I have a USB meter that shows max about 21 Watts approx 7.8 V x 2.8 A.
Regards Filozof71
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
My phone is NOT fast charging with the screen off using the Aukey power bank.
kanagawaben said:
My phone is NOT fast charging with the screen off using the Aukey power bank.
Click to expand...
Click to collapse
Oh, I missed this info. How do you recognize fast charging? I observed that it works a little bit differently while in TWRP, less aggressive.
Regards Filozof71
Sent from my Le X820 using Tapatalk
Don't think there is any way to know what kind of charging it is doing on this phone (unlike my Zenfone 2, which tells you both on the status bar battery icon and with a verbose message on the lock screen). My problem with the power bank is that if fast charging is enabled in the phone settings, it won't charge at all once the screen goes off.
Just confirmed that with the phone battery at about 40% and fast charging enabled, the power bank is unable to charge the phone (stops a couple of seconds after the screen goes off). I tried charging my Zenfone 2 with it (QC 2.0 compatible) and it fast charges properly. This suggests there is some problem with my phone (or the Le Max2 generally?) rather than the power bank
kanagawaben said:
Just confirmed that with the phone battery at about 40% and fast charging enabled, the power bank is unable to charge the phone (stops a couple of seconds after the screen goes off). I tried charging my Zenfone 2 with it (QC 2.0 compatible) and it fast charges properly. This suggests there is some problem with my phone (or the Le Max2 generally?) rather than the power bank
Click to expand...
Click to collapse
Looks like LeEco problem since You also marked Aukey does not work.
Sent from my Le X820 using Tapatalk
I'm having The same issue, when i lock The screen, The phone stop charging. But if i hold on. Charging work normal, someone can help me?
Hello. Did you see official Qualcomm list of QC 3.0 certified devices? Interesting...
Regards Filozof71
Sent from my Le X820 using Tapatalk
Filozof71 said:
Hello. Did you see official Qualcomm list of QC 3.0 certified devices? Interesting...
Regards Filozof71
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
Not seen it, but I'd hazard a guess that our phone is not on the list? Anyway, I think the included LeEco charger (mine at least) has issues, and given the fast charging incompatability with my Aukey power bank, I am thinking the QC 3.0 charging on the phone is not following standards correctly. My after-market QC 2.0 charger, however, works flawlessly with the phone - so if buying after-market chargers or power banks I guess it is safer to stick to QC 2.0 certified ones instead of 3.0, or alternatively just stick to regular slow charging.
kanagawaben said:
Not seen it, but I'd hazard a guess that our phone is not on the list? .
Click to expand...
Click to collapse
Unfortunately you are wrong. My phone Le 2 Max is certified QC 3.0 among very few devices. Majority is still QC 2.0.
Regards Filozof71
Sent from my Le X820 using Tapatalk
kanagawaben said:
Not seen it, but I'd hazard a guess that our phone is not on the list?.........
Click to expand...
Click to collapse
Unfortunately, you are right, probably the phone only supports Quick charge 2.0, in web specifications I only found QC 2.0 support. But this don't explain this problem with stop charging when screen goes off
So, I have one Aukey charger compatible with 3.0 too, and I am waiting only my le max 2 arrive for test. In next 10 days I will back here and tell you what happened!
Filozof71 said:
Unfortunately you are wrong. My phone Le 2 Max is certified QC 3.0 among very few devices. Majority is still QC 2.0.
Regards Filozof71
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
Hmm. Interesting. Something isn't right anyway. Oh well.
Hi again. Now muy phone not charging normaly, when i connect The charger The phond looks like is charging but so slow 80%. On 5h :S and no work all time, i need put out charguer and put un again. I tried with 2 charguers, original and aukey qc 3.0 same results
Did you guys ever suspect the cable?
My wife's S6Edge+ had suddenly started to charge very slow with the original charger and cable. After reading on the specific forum, few others were complaining of the same and as a result, she changed the cable with an older Sony cable which worked perfectly. No mater what, the original cable was charging the phone slow if not fast charge which was fast as before.
valy_cta said:
Did you guys ever suspect the cable?
My wife's S6Edge+ had suddenly started to charge very slow with the original charger and cable. After reading on the specific forum, few others were complaining of the same and as a result, she changed the cable with an older Sony cable which worked perfectly. No mater what, the original cable was charging the phone slow if not fast charge which was fast as before.
Click to expand...
Click to collapse
Hello. I have the USB extension cable then USB meter, then USB cable. I use new USB bought on Ali. All the chain works OK with QC.
Regards Filozof71
Sent from my Le X820 using Tapatalk
valy_cta said:
Did you guys ever suspect the cable?
My wife's S6Edge+ had suddenly started to charge very slow with the original charger and cable. After reading on the specific forum, few others were complaining of the same and as a result, she changed the cable with an older Sony cable which worked perfectly. No mater what, the original cable was charging the phone slow if not fast charge which was fast as before.
Click to expand...
Click to collapse
Thx, i justo bought 1 new cable con amazon. Tomorrow will recibe and try.
valy_cta said:
Did you guys ever suspect the cable?
My wife's S6Edge+ had suddenly started to charge very slow with the original charger and cable. After reading on the specific forum, few others were complaining of the same and as a result, she changed the cable with an older Sony cable which worked perfectly. No mater what, the original cable was charging the phone slow if not fast charge which was fast as before.
Click to expand...
Click to collapse
I have the problem with the power bank whether I use the cable that came with the phone or the cable that came with the power bank. Neither will charge the phone with quick charging enabled and the screen off.
The longer the cable, the less power will perform.. thats useally the case.
same with wire thickness in the cable, some of these extreme cheap cables on AliE got such crappy thinmetal-wires in the cable that it can not transfer all that power it should and will act like a bottleneck.
*the same with these intelligent powercables, that either cuts off when phone is filled, or show a sign like an light-diode in USB plug that are changing colors to tell that the battery is full. (close to all of such intelligent cables ewen some of the high qual-ones, are extrenely limited in power-drawing and most cant ewen manage 1.5amp in std 5v USB and most are under 1.0amp in the amount of power these cable can deliver, and often some plug-cirquit inside the cable there is limiting the amp quite a bit, and so the cable is able to sense when the battery if full and give signal.
Same with those cables where there is an ampmeter/voltmeter on the cable itself, those cables is also strugling to deliver more then +1amp.
that is all in regards tojust plain 5v and it just get ewen worse when trying to perfom quick-charge currents..
Not sure what cable your trying on, but if your going around the original, its good money to purchase an good plain QCvalid USBcable without features from an brand there is known for being able to deliver the power, the 18watt QC in theory can perform is quite a bit and need some metalwiring for the power to flow .
Not charging at all
Hi, I have a problem with charging my Lemax 2. I found similar issues described on other forums, even on youtube.
Long story short: it won't charge, LED blinks twice when on charger, then stops.. Tried different cgargers, cables- nothing works.
Any ideas?
To my surprise, my tronsmart power bank does not support the S7's fast charging.
http://www.tronsmart.com/products/tronsmart-presto-10400
Can anyone please recommend a good fast charging power bank?
Thanks
I'm using this one:
https://www.anker.com/products/A1310011
Fast charging included ?
That's mine,
Xiaomi Ultra-thin 10000mAh Mobile Power Bank 2
Cheap & nice.
Regards!
Thanks to both of you. Im currently leaning towards the anker charger.
1. So to my understanding, any quickcharge 2 charger will support the samsung fast charging, while quick charge 3 chargers will not?
2. Does it say "fast charge" on the phone or you need the official Samsung charger for that to be written on the lock screen?
tomerstern said:
Thanks to both of you. Im currently leaning towards the anker charger.
1. So to my understanding, any quickcharge 2 charger will support the samsung fast charging, while quick charge 3 chargers will not?
2. Does it say "fast charge" on the phone or you need the official Samsung charger for that to be written on the lock screen?
Click to expand...
Click to collapse
As far as I know, Quick Charge 3 should be compatible, too.
In my car i use "AUKEY Kfz Ladegerät Quick Charge 3.0 34.5W Dual Port". Works like a charm.
Gesendet von meinem SM-G930F mit Tapatalk
R850R said:
As far as I know, Quick Charge 3 should be compatible, too.
In my car i use "AUKEY Kfz Ladegerät Quick Charge 3.0 34.5W Dual Port". Works like a charm.
Gesendet von meinem SM-G930F mit Tapatalk
Click to expand...
Click to collapse
I wonder then why I tried my Tronsmart Quick Charge 3 charger and it said "Charging" and not "fast charging".
tomerstern said:
I wonder then why I tried my Tronsmart Quick Charge 3 charger and it said "Charging" and not "fast charging".
Click to expand...
Click to collapse
It suppose to have backward compatibility.
Did you try with other device ?
my AUKEY QC 3.0 charger work fine with s7 fast charging.
tomerstern said:
I wonder then why I tried my Tronsmart Quick Charge 3 charger and it said "Charging" and not "fast charging".
Click to expand...
Click to collapse
I know its a small chance, but i have to ask: did you enable fast charging in battery settings?
And to answer your other question: yes, it does say "fast charging" when using anker. Any charger with 9v and 1.67a output will display fast charging.
The reason your charger does not is that it has only 5v output, and samsung uses 9v for fast charging.
lakicamm said:
I know its a small chance, but i have to ask: did you enable fast charging in battery settings?
And to answer your other question: yes, it does say "fast charging" when using anker. Any charger with 9v and 1.67a output will display fast charging.
The reason your charger does not is that it has only 5v output, and samsung uses 9v for fast charging.
Click to expand...
Click to collapse
Im not sure about enabling fast charging actually, but I don't think anyone disabled fast charging. I don't have that device now to check it (it's my mother's who lives in another city).
The 9v explanation is most probably the reason it does not say fast charging. I will probably purchase the anker charger for her, as you guys say it say's fast charge while charging.
An update regarding the Tronsmart power bank:
It does support fast charging.
I just connected it to my S6 using the original Samsung cable and now it does say "fast charging". I guess it's a cable issue.
Anyway I think I will order the https://www.anker.com/products/A1310011 for my mother.
I myself am using the tronsmart charger for my Nexus 6P.
I bought a Qualcomm one off of Amazon for around 30 bucks. Supports fast charging and isn't much bigger than my S7.
https://www.amazon.com/gp/product/B0156HCJQO
This guy does as well, RAVPower 20100mAh 30W Type C iSmart 3.0 Data Transfer, USB C/Type C
Do these guys charge fast the S7? And safely?
http://produto.mercadolivre.com.br/...d49227591bd496b2d28329df26b0c097&noIndex=true
http://www.banggood.com/Original-Xiaomi-10000mAh-Both-way-Quick-Charge-3_0-Power-Bank-p-1088932.html
Both links seem to be the same product, but I'm not sure.
Thank you in advance.
AG22 said:
Do these guys charge fast the S7? And safely?
http://produto.mercadolivre.com.br/...d49227591bd496b2d28329df26b0c097&noIndex=true
http://www.banggood.com/Original-Xiaomi-10000mAh-Both-way-Quick-Charge-3_0-Power-Bank-p-1088932.html
Both links seem to be the same product, but I'm not sure.
Thank you in advance.
Click to expand...
Click to collapse
Yeah, should be fine according to specs
lakicamm said:
Yeah, should be fine according to specs
Click to expand...
Click to collapse
Thanks.
What about Aukey PB-T11? http://produto.mercadolivre.com.br/...b-t11-30000mah-quickcharge-30-fast-charge-_JM
Is it a good brand and product?
AG22 said:
Thanks.
What about Aukey PB-T11? http://produto.mercadolivre.com.br/...b-t11-30000mah-quickcharge-30-fast-charge-_JM
Is it a good brand and product?
Click to expand...
Click to collapse
That one is good too.
I have Xiaomi Powerbank 2 (10000mah), but only recharge 6900mah (2,5x S7 battery).
Powerbank supports fast charging and works fine.
I can honestly recommend, it's cheap and has compact dimensions.
seba112 said:
I have Xiaomi Powerbank 2 (10000mah), but only recharge 6900mah (2,5x S7 battery).
Powerbank supports fast charging and works fine.
I can honestly recommend, it's cheap and has compact dimensions.
Click to expand...
Click to collapse
Thanks a lot.
Xiaomi Powerbank 2 supports both versions Exynos and Snapdragon one?
I appreciate.
I have Exynos variant and fast charging works well.
Wysłane z mojego Galaxy S7
Thank you. I've ordered a Xiaomi Powerbank 2 10000. If has fast charge, works fine and safe, that's enough for me.
I appreciate.