Hi. I tried to update my kw88. After a while, I thought it was taking much time. So, I forcefully restarted the uodate. Now, the phone always show a message: reboot system now. When I press ok, it comes back to the same place where it shows reboot system now. Plz help how to solve this problem and open my watch.
wrong place to ask
Related
I managed to get my phone running Freex10, went to install a custom theme and reinstalled xrecovery, but i FORGOT to install busybox again.
Now the phone will not launch xrecovery. When I get to the lock screen all looks good until i try and unlock the phone. Then it comes up with infinite notifications telling me that every process has stopped unexpectedly. The phone will also sit at the lock screen for a minute or so, then it looks like its trying to relaunch the OS. It will do that in an infinte loop. Also, it shows no network connectivity when its in the lock screen state.
The only thing I can do it pull the battery and start all over.
I would be very appreciative if someone could help me recover my phone as I dont know how to fix it without getting usbdebugging going.
don´t worry just restore the last firmware with flashtool if you don´t know how this is the post what you need
http://forum.xda-developers.com/showthread.php?t=920746
Okey, my problem is this.
I have installed the phone locator beta from their website. Like the name says it's an app to see where your phone is if it gets stolen, wipe it through sms and do some other stuff. I did not manage to finish the application setup cause I got a phone call during the process. After that I'm locked out of the phone and the phone screen keeps shutting down. It instantly shuts back down after I turn it on. It stays on for like half a sec sometimes, sometimes less. I have managed to uninstall the application through adb to no avail. I have made a backup through recovery also hoping I will be able to restore it without getting the same problem.
But it appears that if I restore the data I get the same thing happening.
Other things I have tried:
Reflashing ROM. It's the stock one from Vodafone.
Reflashing CF-Root Kernel.
Trying to figure out which process I have to kill through adb. But I'm not experienced enough with this to do it.
Trying to remove everything about the app I find out. Still did not work.
Anyone has another idea. I really had a lot of data I don't want to lose.
Thank you.
Update: Solved in post 3.
justrome0 said:
Okey, my problem is this.
I have installed the phone locator beta from their website. Like the name says it's an app to see where your phone is if it gets stolen, wipe it through sms and do some other stuff. I did not manage to finish the application setup cause I got a phone call during the process. After that I'm locked out of the phone and the phone screen keeps shutting down. It instantly shuts back down after I turn it on. It stays on for like half a sec sometimes, sometimes less. I have managed to uninstall the application through adb to no avail. I have made a backup through recovery also hoping I will be able to restore it without getting the same problem.
But it appears that if I restore the data I get the same thing happening.
Other things I have tried:
Reflashing ROM. It's the stock one from Vodafone.
Reflashing CF-Root Kernel.
Trying to figure out which process I have to kill through adb. But I'm not experienced enough with this to do it.
Trying to remove everything about the app I find out. Still did not work.
Anyone has another idea. I really had a lot of data I don't want to lose.
Thank you.
Click to expand...
Click to collapse
What I would do is enter recovery mode. From there mount usb storage and transfer everything that's important to PC. Then wipe everything, format system, format sd card and reflash a ROM through CWM. Obviously mount again usb storage to push the ROM from PC to sd card. Maybe it's a little drastic but I can't think of anything else since I'm not a pro user or anything. Well, just an idea.
Hey thomas. Thanks a lot.
I think that's a great idea. At least it's something I did not try and might work well.
I just found out that you can enter usb storage from recovery, right now it seems I can only see the /mnt/sdcard partition. I will play with it a little to see if I can mount the other partitions before mounting USB. I think the application data is in /data/data am I right?
Okey I have managed to fixed it in the most stupid way possible.
I have noticed that if I leave the screen off for like 15 seconds then I get like 2 seconds window before the screen turns off again. I have managed to go to the screen timeout settings and it seems like the application changed that to a very low value as none of the defaults value were ticked. I have ticked the 1 minute value and now the screen stays on.
I have uninstalled the app and I'm really afraid to test it again I should probably make another backup in this state
After I restarted my Cell the boot animation keeps on replaying after the slight vibrate, same thing hapens for 10 mins then the mobile starts.
Its not normal
Can anyone help?
HI
Its really not normal.
Never happened to me.
U shud probably try
1-unmount sdcard/ check last installed application which might caused this
2-take all backups and go to cwm recovery and clear user data and caches.
3-If all these doesnt solve, then reflash cm7!
hirentherock555 said:
HI
Its really not normal.
Never happened to me.
U shud probably try
1-unmount sdcard/ check last installed application which might caused this
2-take all backups and go to cwm recovery and clear user data and caches.
3-If all these doesnt solve, then reflash cm7!
Click to expand...
Click to collapse
Found a partial solution after formatting the cell twice like a fool
Last night while playing Dangerous chambers 3D or somthing my cell got hanged.
Later it wouldnt restart or anything so had to pull out the battery.
After it started it went into loop mode.
I got worried
Formatted it once.
All ok later then again after some apps it went in loop mode.
Couldnt figure out which app was causing the prob.
Then today morning after some reasearch found out that:
In CM7 settings in settings menu> Tablet tweaks> disable lock screen> Tick
This is what i used to do to use an alternate lock screen.
After removing the check all is fine untill now.
Will update if anything happens next.
I also met this problem when trying to develop a CM7 ROM myself (from HPA CM7 BETA2). My problems are:
1. After building successfully, apps inside the output /system/app folder are bigger (in size, of course) than the original HPA ROM (ADWLauncher in HPA is 731.5K, and mine after building is 1M)
2. After flashing to DV, my phone hangs at the CM7 logo. It's OK to type "sudo adb devices" to see that my device is attached, but then any command other than that will receive "error: closed"
Guys, do you know what's the problem with my build?
I've had Cyanogenmod 9 nightlies on my SGS2 since April. I didn't install every single one, but pretty much only those with good ratings, specifically those that had no complains about battery drain and heating...
Currently on the 06-28-2012 nightly. This ran fine at first, but over time, it started to occasionally crash into Kernel Panic. I figured I'd just pick a new nightly, but then I ended up having to travel and installation of a new nightly got delayed.
Now I'm home, and I can't use the phone at all, cause it crashes into Kernel Panic almost as soon as I unlock the screen after Android finishes booting. The last thing I see up in the message bar is "WhatsApp error" and the screen goes dark. It won't stay on long enough for me to uninstall WhatsApp or select factory reset from the system menu.
I don't think its a problem with WhatsApp, cause WhatsApp used to run fine, while Kernel Panics originally mainly seemed to happen after I got a "storage full" message. In response, I deleted a load of pictures after rebooting, to make sure there's free space, but it kept crashing occasionally, till now, its just unusable.
I've tried to flash a stock Samsung ROM (I9100XWLPG_I9100XXLPX_I9100NEELP4_HOME.tar.md5) but that hasn't been working either.
Kies drivers are installed on my Laptop. Odin sees the phone too.
I followed the instructions from the rom page, changed no settings in Odin, just picked PDA and selected the ROM.
Odin goes "Added" when I plug in the phone, verifies the ROM, then the whole thing hangs on "setting up connection"
So I unplug, pull the battery and then reboot, which works fine, but once booted, it won't stay on longer than a few seconds.
Anyway, does anyone have any clever ideas how I can get out of this Kernel Panic loop?
Tsais said:
It won't stay on long enough for me to uninstall WhatsApp or select factory reset from the system menu.
<snip>
Anyway, does anyone have any clever ideas how I can get out of this Kernel Panic loop?
Click to expand...
Click to collapse
What's preventing you from factory resetting from recovery?
Lack of knowledge is preventing me!
How do you factory reset from the "Kernel Panic Download Mode"...?
Download Android Commander from here:
http://androidcommander.com/
Boot your phone, don't unlock.
Start Android Commander, navigate to /data/apps and delete WhatsApp's apk (com.whatsapp1.apk or something like that) or rename it to .apk.bak
Restart your phone without unlocking.
Hope the errors gone.
Hello,
My device is an HTC Inspire 4G running android 2.3.5 with cwm v5.8.1.5.
I just got my phone activate on straight talk wireless and within an hour of doing so, my phone alerted me there was an update to install, and needed to reboot.
The phone shuts off and then CWM pops up and tries to install the update, only to fail and give me a signature verification error, and an aborted install.
I figured no big deal, I'll just reboot and forget about it. Only now every time my phone boots up, it runs normally for a minute and then pops up the installation dialog and automatically shuts down, only to reboot into CWM for the install to abort again. Every time, without fail.
I am at a complete loss as to what to do about this. I can't find any information even remotely related to my problem. Maybe I just don't know the right string of keywords for the search. Anyway, any help will be immensely appreciated.
Update: I was able to recover an old image and at least make the phone useable again, but it's once again notified me that At&t has an update for me. I chose to postpone it this time, but I'm still at a loss as to how to handle this. I don't want to just keep clicking to postpone the update, but I can't allow it until I figure out why CWM is aborting the install.