Can someone link the latest the modem here (not firmware, the title is wrong by mistake)
The fingerprint scanner stopped working after I flashed one.
Thank you
https://yadi.sk/d/5v2p3F7o3GJBxn/China
Related
Anyone else facing the same problem on this version? Any solutions ? Just removed the orange imm76d.i9300bvblg2 rom and installed the unbranded latest uk XXBLG8 rom which is now giving this error on kies. Used to work fine on the orange rom. Mobile is unrooted and stock rom is flashed.
I think that the leaks can't be upgraded by kies. you should install the latest JB rom using odin
I know the leaks can't be upgraded. I meant the official updates.
sorry, i thought it was LI8 (the last leak before poland official JB)
to upgrade, you would need to have the poland CSC, it can be changed *#272*your_IMEI#
then you have to select the poland CSC:XEO
first BACKUP in the external SD because doing this you would lose everything in the internal SD (including tithanium backups)
sorry for my english
Please read my post. Im not looking to go to JB as there is no UK version and its not fully stable. I have the latest XXBLG8 uk version and was looking at the official updates for this version. Thanks
you can not get official update because your product code does not maches your rom.
You have to stick with ODIN or Use orignal orange rom.
muhammad.ali123 said:
you can not get official update because your product code does not maches your rom.
You have to stick with ODIN or Use orignal orange rom.
Click to expand...
Click to collapse
It was due to the csc being KOR. Once i changed this to BTU the problem was resolved. Even though the rom was a BTU rom in the first place. Thanks for your help anyway.
After reading through the topic, I'm still a bit unclear as to the camera firmware issues relating to the latest 4.1.2 updates. Does this newer firmware upgrade the camera itself (even when flashed via Mobile Odin) or is there a separate process?
I had thought that the earlier leaked firmware was the one that didn't properly upgrade the camera, but I'm still unclear.
Can anyone provide some clarification?
For me, *#34971539# did nothing.
Hi all,i hope u can help me,
i was on the stock official rom on lastest update ,then i installed S4 revolution10.0Beta,
in aroma i chosed install the modem(it said that chose this if u came from older modem than mg4),but later i rememembered that the device was on mg4,after installation ,when calling it said not registered on network,then i restore the official rom(i did backup from recovery)and this still hapening,then i downloaded the uk official rom (24\12\2013) and flashed it by odin but when samsung logo appear the device restart,then i flashed xellamg4 modem and then restore the official rom and this also hapenning,the imei number changed and i feel depressed please help me please:crying::crying: sorry for my bad english.
samsung lo said:
Hi all,i hope u can help me,
i was on the stock official rom on lastest update ,then i installed S4 revolution10.0Beta,
in aroma i chosed install the modem(it said that chose this if u came from older modem than mg4),but later i rememembered that the device was on mg4,after installation ,when calling it said not registered on network,then i restore the official rom(i did backup from recovery)and this still hapening,then i downloaded the uk official rom (24\12\2013) and flashed it by odin but when samsung logo appear the device restart,then i flashed xellamg4 modem and then restore the official rom and this also hapenning,the imei number changed and i feel depressed please help me please:crying::crying: sorry for my bad english.
Click to expand...
Click to collapse
Check your IMEI and Serial Number. Both are located in Config -> About Device -> Status. Write them down.
Then take the battery out and check the label. See if they match or not.
If your EFS is changed, you need to go back on the MG4 modem from now on.. on any rom.. So install a rom, then flash the MG4 modem on top of it.
Flash the ROM first then flash the Modem. No point flashing modem first then flashing the ROM, it will just be overwritten if there is a modem attached to the rom.
Hi guys,
I Unlocked bootloader, rooted and soff my device and then flashed Android Revolution HD 11.1:
http://forum.xda-developers.com/showthread.php?t=2694917
My stock was 4.4.2 , 1.58.502.1 so as instructed here:
http://forum.xda-developers.com/showpost.php?p=54408500&postcount=9592
I flashed 2.22.1540.3 firmware.
Everything seems to work great but Motion launch gestures not working.
Is it firmware related ?
Is there a 2.* AT&T firmware I can download to fix it?
Thank you!
For anybody that has a USA Bought original E5803:
Does your fingerprint sensor work? What software are you on?
Can somebody please give me the customization version they are on? I restored to a different software on my phone and lost fingerprint completely.
To Do:
On dialer, type *#*#7378423#*#*
Service Info -> Software Info -> Customization Version.
Could somebody please give me that.
Thank you!!!
core2kid said:
For anybody that has a USA Bought original E5803:
Does your fingerprint sensor work? What software are you on?
Can somebody please give me the customization version they are on? I restored to a different software on my phone and lost fingerprint completely.
To Do:
On dialer, type *#*#7378423#*#*
Service Info -> Software Info -> Customization Version.
Could somebody please give me that.
Thank you!!!
Click to expand...
Click to collapse
Hi
My fingerprint sensor is working pretty charm and my customization version is 1298-7260_R6C.
I flashed Autralian Customized Firmware ( 6.0.1 ) and the phone started working pretty decently.
If you want the same firmware and want to know the steps for flashing it feel free to contact me
My email : [email protected]
Thank You !
Thank you. I know how to flash, that's what I'm doing right now. I'm trying to sell the phone and buy an international version so I wanted to know the stock firmware on an untouched E5803. Do you happen to know what it was?
Was your fingerprint sensor working before you flashed to the Australian software?
core2kid said:
Thank you. I know how to flash, that's what I'm doing right now. I'm trying to sell the phone and buy an international version so I wanted to know the stock firmware on an untouched E5803. Do you happen to know what it was?
Was your fingerprint sensor working before you flashed to the Australian software?
Click to expand...
Click to collapse
No, My fingerprint scanner hasn't worked before. This is a common problem for US phones. By default the fingerprint scanner is disabled but if we flash a international firmware or any other it starts to work. You can flash Australian firmware to make it work. As it is a official firmware you don't need to unlock bootloader.
If you want to flash Australian CU then you will get it from XperiaFirm from Flashtool.
If you have not upgraded your Lollipop then download Lollipop customized firmware from XperiaFirm and flash it to experience stock firmware on untouched E5803
Thank You !
Flashed E5803_Customized GEL_1299-2789_32.2.A.0.224_R7C and everything seems to work fine. Unlocked, rooted, and emulated my original TA partition and everything seems perfect.