Hello Everyone,
My Micromax Canvas Nitro A311 is showing "no command" error. Actually I've never rooted it and never did any experiments on it. I was using it normally and then locked its screen and kept it aside for a few minutes and when I took it back to use again it was switched off. I pressed power button to ON it (NOT pressing volume down button) but its only showing "no command" error screen with a red triangle error sign on android robot and when I pressed power button again it showed recovery menu. Exactly like this: https://www.youtube.com/watch?v=6EdguhWt03w. I did "wipe data/factory reset" and "wipe cache partition" and rebooted. After several tries it got me to setup screen (the one which you get after factory reset or during starting a brand new phone) and I selected language then connected to WiFi and after that option to check/uncheck permission for Google & Location (for android apps to determine your location and scan wifi networks even when wifi is off for improved accuracy and other purposes). But when I press forward arrow to go to next step it shows "setup wizard stopped working". Tried several time but no use. I thought I should try to flash it so I searched and referred this thread: https://forum.xda-developers.com/a310/development/rom-cyanogenmod-13-micromax-a311-t3365783. Now as I said I’ve never rooted my phone or never experimented with it so I don’t have TWRP or any other recovery installed. Only inbuilt recovery (that’s coming after no command screen as I mentioned before). So it doesn’t show ROM/Gapps on external storage. Somehow I figured this out that I can get access to internal storage when I connect my phone to PC (not to mention through USB) during that first time setup/installation screen (where setup wizard stopped working). I then copied zip files of Lineage OS 13 and Gapps 6.0 (pico) and soundpatch in phone’s storage and rebooted again and from recovery menu I selected "apply update from sdcard" and it showed zip files of lineage OS and Gapps and soundpatch so when I select lineage OS to install it, it shows "installing system update" but within a few seconds installation abort (NO error code is shown). I tried various ROM for Micromax A311 like:
Cm11 beta 2 By Pinto & Amit.zip,
CM12.1_Lolipop_5.1.1_AmakSevn.zip,
CM13-UNOFFICIAL-Snapshot-ZNH5YAO0FI-Nitro.zip,
lineage-13.0-20170523-UNOFFICIAL-A311.zip,
FireHound-BurntAss-2.0-20161110-A311.zip,
ResurrectionRemix-M-v5.7.2-20160731-A311.zip,
GalaxyRom_Ported_By_AmakSevn.zip,
MIUI 7 - 5.10.15.zip,
MIUI 7 5.9.1 MULTI BY JAVED(UNOFFICIAL).zip,
Miui 8_6.6.20_stallion mod.zip,
Also tried stock ROM for Micromax A311 but every time it shows installation abort after selecting ROM file. I also never created backup file so can’t restore.
Is there any way to install TWRP or similar recovery tool now? Is there anything at all that could be done at this point? Or this phone is dead?
Related
I have a problem with one of my Lenovo A830 phones.
I bought it from Etotalk, so it came rooted, and with their custom version of the Lenovo Stock ROM and their custom version of CWM 5.5 installed.
I tried formatting my SD card and then doing a factory data reset from within the operating system. (I was intending to install MIUI V5 after rebooting into recovery).
However, on rebooting, the device is now caught in an infinite boot loop, and I am not able to boot into recovery mode (by holding down power and both volume keys). It loads the initial splash screen, then shows a few seconds of the Android character and some whirring cogs before rebooting.
I am able to boot into Factory mode (power and volume up) or Meta mode (power and volume down). Factory mode has a number of options, but they are all in Chinese characters, which I am unfortunately not able to read.
I did notice that my SD card seemed to be write protected when I tried to format it in my computer and to copy on the new ROM - I solved this by putting it in a different phone and reformatting it. I wonder whether the factory reset process has write protected something it shouldn't have?
Does anyone know how I might best proceed? I've been digging around on the forums, and tried a few things, but there's nothing which seems to provide a coherent solution for this problem.
I've got the latest Android SDK Tools, MTK Droid Tools 2.4.8, SP Flash Tool 3.1312, some additional ADB drivers (120827 v3.7) that I'm not sure how to install, the latest MIUI V5 ROM (3.8.16), and the latest stock Lenovo ROM (S118 from Need A ROM, just in case I need it).
Maybe different SP Flash Tools version?
I had trouble using SP Flash Tools v3.1312 with A830. Once I switched to v3.1304.0.119 I was able to flash both the original ROM and the custom MIUI one without serious issues. I'm unable to post the download link but google it.
One other thing is that when connecting the phone, it usually loads the something something Preloader driver, which is no good (even if it gives you Download OK). When attempting to flash either ROM, try pressing both the power and volume up buttons while connecting the phone (after pressing Download), only way it worked for me.
Good luck!
I managed to sort this out quite simply in the end!
On the Lenovo A830 (and presumably other Lenovo Android phones?), you enter recovery by pressing power and then pressing volume up / down together after a short pause. The short 1 - 2 second pause is important, because if you try and press them at the same time or in quick succession it doesn't seem to work.
I then installed MIUI V5 from the SD card followed by Google Apps after a reboot. In order to get MIUI to install, I had to remove the assert check at the top of the update script, because this seems to erroneously check for the A820 (even though there isn't currently a port for this device?). It's working excellently with two exceptions - I am unable to select the SD card as a storage device, and Google Play store is not searchable (it causes a Force Close).
tominglis said:
I managed to sort this out quite simply in the end!
On the Lenovo A830 (and presumably other Lenovo Android phones?), you enter recovery by pressing power and then pressing volume up / down together after a short pause. The short 1 - 2 second pause is important, because if you try and press them at the same time or in quick succession it doesn't seem to work.
I then installed MIUI V5 from the SD card followed by Google Apps after a reboot. In order to get MIUI to install, I had to remove the assert check at the top of the update script, because this seems to erroneously check for the A820 (even though there isn't currently a port for this device?). It's working excellently with two exceptions - I am unable to select the SD card as a storage device, and Google Play store is not searchable (it causes a Force Close).
Click to expand...
Click to collapse
Hello,
How did you manage to fix the reboot loop?I have the same problem,after a factory reset the phone just reboot like you said in first post...please help me fix it...
claudiuionel said:
Hello,
How did you manage to fix the reboot loop?I have the same problem,after a factory reset the phone just reboot like you said in first post...please help me fix it...
Click to expand...
Click to collapse
Hi I had similar "reboot loop" problem this morning after a phone factory reset.
I have no idea how I solved that but the following was the steps I tried:
1. Install the MTK6589_PdaNET_ADB_VCOM_Drivers. Skip the USB connection during setup. Start the PdaNET after setup finished.
2. Insert battery inside the phone and connect the phone with the computer by USB
In my case, the phone reboot loop once, and the lenovo screen appeared in the second restart. The phone hanged. I unplugged the cable, took out the battery, insert the battery again and start the phone normally again and it is working now.
I recommend installing the recovery rom after you have fixed the phone.
Goodluck
Hi my friends... i am new here and i have a problem with my nexus 9 wifi with 5.0.1 firm.
i ad try to root my device and he works nice ... but later tried install the kali nethunder 2.0 on my nexus 9.
i downloaded the image of kali , i downloaded also the TWRP Manager from google play and then installing the TWRP correctly.
so far so good ..at the momment!
Then... entered to the recovery mode i put the install button , I searched for the kali nethunder image and then execute it correctly!
He made some time to install it , when it finished the installation , rebooting and stuck there!
i turn off and rebooting again to the bootloader menu , i make the factory reset but after the reboot , it show me the adroind error icon witha red triangle...
I Dont now what to do now, my pc is not recognizes my nexus . the only screen i have is the scrren with the recovery, factory reset,sim lock, image crc ,show barcode and ram test !
but the recovery and the factory reset is not working... if i put those two it show me again the ...
the icon of adroind error with a red triange.
You have me suggest some solution ??? help me please ...
Thanks any way !!!
Can you get into fastboot mode (Power + Vol down, when device is turned off).
If so try manually flashing stock factory image.
Hello
Yesterday i have recieved the Pepsi (Koobee) P1S. it was full of bloatware so i decided to flash a modded rom. After i realized that this custom rom is only in english and chinese (Im German) i wanted to switch back to the original. But then i made the biggest mistake: I have flashed the false rom (CM for Mt6592 CPU but false Smartphone). After that i have flashed the right original rom again. but a strange Error appears: the Phone boot up normaly and then freeze and reboot by itself..over and over again. But not at the same step. Sometimes it freeze during the Bootanimation..sometimes it boot up completly and i can swipe through the Screens (for about 10 sec). When i push the standby button (Display went off) the Phone stays in this mode and dont freeze.
the i flashed TWRP and try to wipe the phone. Even in TWRP it freeze, but not during the wipes or in the Boot Mode slelect screen.
I Have a friend with the same phone. Is it possible to copy a complete backup (eMMC etc) to my phone? Or someone had a Idea what i can try next? I have flashed different roms (for this phone) so many times, but the error is still there.
Please help me.. It should be a present for my GF birthday today
SOLUTION
I downloaded the flashtool that flashes MTK Devices then searched google for Pepsi p1s needrom and downloaded the original firmware scatter file, turn off the P1S unplug it from USB,...Start the flashtool, and search the firmware will be second search bar select search and browse your computer for the firmware you downloaded from needrom, then you will see it load all the files.....there is a button bar that has an arrow open the arrow and select firmware update, then hit the green go button after you hit the green go button plug in your powered off PEPSI P1S ....it will give you a red bar on the flashtool at bottom first, then it will format your device properly, then install all the necissary files, its real quick about 3 minutes, after a box will pop up on the screen and say OK with a big check mark, at this point you can unplug your phone, power it up and wait about 3 minutes, everything will be normal again. So sorry I would post the links however I forgot my password and username that I was using for many years and forgot my recovery email as well.....so if you google it you can find the stuff, just hope I helped with the proper method of flashing......good luck, let me know how it goes.
Thanks but i know how to flash the firmware with SP Flash Tool. i have flashed the P1S with 3 different roms..but always the same error (freeze and reboot at different points)
Are you using download mode? Or firmware update? The reason I ask is download mode always gave me a bootloop, but when switched to firmware update mode it formats the device correctly and fixes the file structure, try firmware update mode.
Im using "Format All + Download"
Try using firmware update mode, let me know what happens.
same problem...freeze (at different points) ans reboot.
here you can see what happen:
https://www.youtube.com/watch?v=J1oFkgUwtOo
try this! P1
power off
then hold power button + volume down
the boot mode will appear
select recovery
it will show you no command
then pres power button first and the press volume up
now you device is on recovery
then select
wipe data/factory reset.
Blueray88 said:
Hello
Yesterday i have recieved the Pepsi (Koobee) P1S. it was full of bloatware so i decided to flash a modded rom. After i realized that this custom rom is only in english and chinese (Im German) i wanted to switch back to the original. But then i made the biggest mistake: I have flashed the false rom (CM for Mt6592 CPU but false Smartphone). After that i have flashed the right original rom again. but a strange Error appears: the Phone boot up normaly and then freeze and reboot by itself..over and over again. But not at the same step. Sometimes it freeze during the Bootanimation..sometimes it boot up completly and i can swipe through the Screens (for about 10 sec). When i push the standby button (Display went off) the Phone stays in this mode and dont freeze.
the i flashed TWRP and try to wipe the phone. Even in TWRP it freeze, but not during the wipes or in the Boot Mode slelect screen.
I Have a friend with the same phone. Is it possible to copy a complete backup (eMMC etc) to my phone? Or someone had a Idea what i can try next? I have flashed different roms (for this phone) so many times, but the error is still there.
Please help me.. It should be a present for my GF birthday today
Click to expand...
Click to collapse
I have noted one thing.
when I update supersu to play store and reboot it goes in bootloop.
so I recommend not to upgrade or even to make unroot just after removing apps with viruses
I bought swipe elite plus today ..
And when I power up
With "power key + valume key"
Now its won't open
After swipe logo its stuck in blinking clear black display
Please help me
Im facing the same issue.
Please let me know if you were able to fix it.
I had yhe USB debug mode off when my phone crashed. The recovery is also corrupt. Nothing hets displayed after Volume up + power.
Phone is not detected by the computer, so cant use QF
Swipe Elite Plus Fully Wiped "No OS" Stuck on Swipe Logo
As for now reaching every corner of my no OS issue I can Quote sure problem happend to my device.
I really want to explain everything how it happed. Firstly
1.I bought Swipe Elite Plus 2 monts back, everything was fine but then suddenly after one week using at the mornig time I see Phone shutting down after every 2 to 4 min.
2. When I head to settings "about phone" phone backs to home screen if I swipe to and fro 5 to 6 time device switch offs' .
So wasn't stepping towards flashing .... before flashing what I did was
1. reset.. then hard reset... switch off hold volume + and Power button bootloader hardreset. Evrything done but the result was same (hangs /switch off).
2. In recovery mode i can see 9 times reset logs.. gave up..then
I googled for stock rom... I could not find for first 1 month or two until now...
3. Then I downloaded stock rom for this device (Swipe Elite Plus) found from previously posted swipe forums links (google drive), Drivers, Tools, and Stock Rom...everything.
4. But I get... sahara Fail...this is not possible with Sahara protocol..
#
# Tried several times.. changing ports...Qualcom driver installation.... everything was right (doubted driver problem ~but tried everything/manual port driver update to Qualcom.... QLoader 9008)...
# But sahara Fail.... Cannot procced with sahara protocol....
---------------------
Read forum.... thought to root....rooted with iroot(not sure rooted or not rooted) however TWRP flashed... and wiped everthing now no OS....
# No way to connect to pc. I can hear connection (sound) when i plug in usb to phone then phone switch on and stuck on swipe elite plus logo..
# however I can enter to TWRP recovery by volum up + power button...and When I go to "power off" from reboot option in TWRP phone offs' then on again and stuck on swipe logo, while usb cable is still connected and I can hear connection sound but no signs (nothing) of device at "Device Manager"....
#Can I have any ROM/CM to flash from internal memory as I can still access Internal storage (through PC) in TWRP mode and rooted...??.I will try...
#Do I need convert emax mini/ TCL M3G ..?? But no way to usb connecion??? only sound...( I am Using win7 32bit)
Any Links to flash file plz....????
My swipe elite plus wont boot
Well.. somehow I have QFIL flashed the TCL M3G rom following the UMI forum tutorial..
But I can not restore QCN backup (Downloaded from given link 216kb) bcz.. Port is not Showing 9091 com port.... When I go to QFIL>>Tools tab>>backup /restore>> then select the downloaded QCN file then backup and restore button is inactive...I know it bcz of com Port ....QDoader 9008(COMxx)...
# But then If I try to Switch on it Stuck on Small Linux logo (No more Swipe Elite Plus/phone changed to TCL M3G)...And sometimes Loads big "Android" Logo for 1 or 2 then shuts down and nothing happens.... I can boot to bootloader....TWRP is Gone...
# I did try to flash the stock rom found at aplush.xyz but this time it is again Sahara Fail...Sahara..Fail...
What Can I do...??? :fingers-crossed::fingers-crossed::fingers-crossed:
anuragkumar19 said:
I bought swipe elite plus today ..
And when I power up
With "power key + valume key"
Now its won't open
After swipe logo its stuck in blinking clear black display
Please help me
Click to expand...
Click to collapse
I am also facing same problem
This happened everytime whenever i tried to hard reset
May be flashing custom rom will help
Bt im afraid if while processing it may cause the same problem
problem of swipe elite plus hang on logo and screen blinks
guys first tell me if your phone is rooted or not
if your phone is not rooted then try the below steps
download swipe elite plus firmware
download android usb driver
download qualcomm driver
download QPST
move the swipe elite plus firmware to the following path:-my computer/local disc(C)/program files/qualcomm/QPST/bin
then you will not encounter sahara error
now press and hold volume+ and volume- button at atime and connect usb cable simultaneosly
you will entert diwnload mode
now provide qualcumm driver path and open QPST AND flash your firmware
enjoy
I rooted my swipe elite plus with Kingroot and uninstalled some system apps and also apps provided bt swipe.....Then..there was no problems and i've restarted several times after i rooted and uninstalled the system apps...but when i uninstall Kingroot (unroot) Then my phone got stuck on Swipe logo ...I tried hardreset (volumup+power) But didt work again stuck at the logo..What Can i do please help
from ,
jahir ali abbas
pallapatti karur district tamilnadu.
To,
swipe elite plus MD
swipe mobile
unrespected sir,
this is a worst mobile i have ever had. bakwas mobile. china company. not booting whats the solution u fellows.
"download fail firehorse fail fail to load qdloader port after switch" plz help.
"download fail firehorse fail fail to load qdloader port after switch" plz help.
---------- Post added at 12:03 PM ---------- Previous post was at 11:52 AM ----------
"download fail firehorse fail fail to load qdloader port after switch" plz help.
Swipe elite plus blank screen even after successful flash with stock rom
My swipe elite plus show blank black screen, even after several times flashing with stock rom... What should i do... When i use ADB commands, it shows null device. Kindly help me..
... I also tried it to flash with videocon v502830 rom.. But after 36% completion, it shows nprg error.. Or 5002...but phone status appears to be rooted while this flash.
Have you tried going "NUCLEAR" Android=>> ♧♧♧ !!!
IDK if code works on iOS, other OS. After W 8.1, I went in 2010 to 2.2 -> 8.1 now on Pixel 2(loved it, native OS w/No bloat like Samsung & never went back -> Android/Chrome). Code as follows.
*2767*3855#
It's a complete wiping of your mobile also it reinstalls the phones firmware(in XDA forum). "Work for me with 'normal' FRR or HR -> 'no joy' or for non-military means 'nothing' -> Mech Engr/CS B.S. degrees. If you are ~XDA, your risk, ask the Mods or leads for XDA if my suggestion is ok"!
Hello everyone,
I’m actually not an android developer but managed to maneuver myself in a quite tricky situation. I think I need some help from someone how has deep insights in the that topic.
Right now, I’ve got the problem that only TWRP would start if I press the power button of my Ulefone Armor 6. The Stock ROM won’t. My original goal was to restore pictures I deleted by using a recovery tool on my pc. For that reason, I tried to root the phone by using TWRP and Magisk. I performed the following steps:
- Unlocked the bootloader in the developer options and by using the command “fastboot oem unlock” on my pc.
- Installed TWRP 3.3.1 for my Phone by using the command “fastboot flash twrp.img”
- Rebooted the system in recovery mode. TWRP was installed and asking for a PW. Decryption didn’t work with the set PIN. I couldn’t find any files (installation file ) in the filesystem after clicking “Install”
- Restarted the phone in “normal mode”. The system was now in factory settings without performing anything like this on purpose. I couldn’t find any files like pictures. I thought: ****, I ****ed up! I made my situation even worse than before…
- Every time I booted the stock ROM, TWRP was gone afterwords. I could only open the stock recovery. For that reason, I installed TWRP a couple of times. When y restarted in recovery mode directly after installing TWRP it stayed.
- Then I removed the PIN in Android without any result. TWRP was still asking for a PW.
- I pressed Wipe and Format Data in TWRP. After that the PW request was gone.
- I installed Magisk V20.4 from my SD-Card by using the install button in TWRP. No error occurred.
- After rebooting, a pop up from TWRP appeared with something like: “corrupt data: you need to perform a factory reset” without any other options. So I did it.
- On the next normal reboot, no android appeared, but only TWRP by asking for a pw again.
- I pressed format data again. TWRP was not asking for the PW again.
- Now I did a backup with TWRP for the first time…
The current state is:
When I press the power button only TWRP starts. I can also use the fastboot mode. But I can not switch off the phone by pressing the power button or using the Power off command in TWRP. It will always restart.
Now my first goal is to restore a many files as I can by using any rooted ROM. Later I would like install the stock ROM again. In the process I would like not to brick my phone which is actually the one of my girlfriend… So please, what can I do?
Many thank for reading everything and for the help
If someone needs the logfile from TWRP, I can send it via PM I guess.
yo...
if your fone is like mine, and you cant take the battery out, you cant power off. you need to have the usb lead out of your machine in order to shut down, and that's in the os, if usb is plugged in, fone will reboot. By pressing power off switch, you only reset, because you are not in the os which has the turn off function. Hope this makes sense