this is thred for spice coolpad 2 and coolpad 7268 ..
i rooted this device using kingo root .. this softwere is on cnet ..
i install cmw chines recovery flashing cpb or cbp file using ygdp softwere :laugh::laugh::laugh:
and now i am installed stock rom messege bug fixed .........flshing cpb file ..
plese tell me any cynogenmod rom avaleble for this device ....
another root method found
akshaynalinde said:
this is thred for spice coolpad 2 and coolpad 7268 ..
i rooted this device using kingo root .. this softwere is on cnet ..
i install cmw chines recovery flashing cpb or cbp file using ygdp softwere :laugh::laugh::laugh:
and now i am installed stock rom messege bug fixed .........flshing cpb file ..
plese tell me any cynogenmod rom avaleble for this device ....
Click to expand...
Click to collapse
use pan bidu apk .. on xda
Little confused about Coolpad vs Coolpad2
Hi,
I am just going to purchase Spice Mi Coolpad 496 on HS18 site but was surprised to see their two listings for the almost same product:
Only difference is in the title and their support desk replied it as "different products"
1. Spice Quad Core Android Coolpad - Mi496: Rs. 5499
2. Spice Coolpad 2 Mi-496 Mobile phone - White Rs. 9429
I checked Spice official website, gsmarena, whole of the google but no where there are two similar products i.e. coolpad vs coolpad 2
Can any of you experienced members can suggest me if they are different models?
Thanks,
Rakesh
akshaynalinde said:
use pan bidu apk .. on xda
Click to expand...
Click to collapse
rakesh2 said:
Hi,
I am just going to purchase Spice Mi Coolpad 496 on HS18 site but was surprised to see their two listings for the almost same product:
Only difference is in the title and their support desk replied it as "different products"
1. Spice Quad Core Android Coolpad - Mi496: Rs. 5499
2. Spice Coolpad 2 Mi-496 Mobile phone - White Rs. 9429
I checked Spice official website, gsmarena, whole of the google but no where there are two similar products i.e. coolpad vs coolpad 2
Can any of you experienced members can suggest me if they are different models?
Thanks,
Rakesh
Click to expand...
Click to collapse
I will check their site, but coolpad is mi-515 while coolpad 2 is mi-496.
Sent from my Spice Mi-496 using xda app-developers app
buy chiper one
rakesh2 said:
Hi,
I am just going to purchase Spice Mi Coolpad 496 on HS18 site but was surprised to see their two listings for the almost same product:
Only difference is in the title and their support desk replied it as "different products"
1. Spice Quad Core Android Coolpad - Mi496: Rs. 5499
2. Spice Coolpad 2 Mi-496 Mobile phone - White Rs. 9429
I checked Spice official website, gsmarena, whole of the google but no where there are two similar products i.e. coolpad vs coolpad 2
Can any of you experienced members can suggest me if they are different models?
Thanks,
Rakesh
Click to expand...
Click to collapse
home shop 18 giving offer on spice coolpad 2 .. so buy chiper one
Alusica speaks
Sorry friends, we are too late :crying:! They removed cheaper one from their website.
akshaynalinde said:
home shop 18 giving offer on spice coolpad 2 .. so buy chiper one
Click to expand...
Click to collapse
akshaynalinde said:
this is thred for spice coolpad 2 and coolpad 7268 ..
i rooted this device using kingo root .. this softwere is on cnet ..
i install cmw chines recovery flashing cpb or cbp file using ygdp softwere :laugh::laugh::laugh:
and now i am installed stock rom messege bug fixed .........flshing cpb file ..
plese tell me any cynogenmod rom avaleble for this device ....
Click to expand...
Click to collapse
hi
i have tried to flash the cpb file mentioned in other thread but i am getting this error
11:09:28 CELL0: YGDP_Download_Platform Software Version: Customer - <V2.13_130522_02>
11:09:28 CELL0: Cell 0 USB address is: 7&27a5caad&0
11:09:49 CELL0: Waiting for device ready ...
11:09:51 CELL0: Init download info ...
11:09:51 CELL0: Start to parse partition info ...
11:09:51 CELL0: Init complete! Start ...
11:09:51 CELL0: Download Started...
11:09:51 CELL0: Downloading CPB:
11:09:51 CELL0: Init DownQueue...
11:09:51 CELL0: Device connected, start to download ...
11:09:51 CELL0: Check device ...
11:09:51 CELL0: Query CID fail, error code:2
11:09:51 CELL0: Check CID pass!
11:09:51 CELL0: Check phone pass !
11:09:51 CELL0: Get fuse info error,Erro Code:2
11:09:51 CELL0: The CPB is not fixed to this phone !
11:09:51 CELL0: Download faile,please try again!!
11:09:51 CELL0: Total download time elapsed: 0 min : 0 sec
11:09:51 CELL0: Downloading all files: Failed!
Can somebody help me on this ?
reply
somaniab said:
hi
i have tried to flash the cpb file mentioned in other thread but i am getting this error
11:09:28 CELL0: YGDP_Download_Platform Software Version: Customer - <V2.13_130522_02>
11:09:28 CELL0: Cell 0 USB address is: 7&27a5caad&0
11:09:49 CELL0: Waiting for device ready ...
11:09:51 CELL0: Init download info ...
11:09:51 CELL0: Start to parse partition info ...
11:09:51 CELL0: Init complete! Start ...
11:09:51 CELL0: Download Started...
11:09:51 CELL0: Downloading CPB:
11:09:51 CELL0: Init DownQueue...
11:09:51 CELL0: Device connected, start to download ...
11:09:51 CELL0: Check device ...
11:09:51 CELL0: Query CID fail, error code:2
11:09:51 CELL0: Check CID pass!
11:09:51 CELL0: Check phone pass !
11:09:51 CELL0: Get fuse info error,Erro Code:2
11:09:51 CELL0: The CPB is not fixed to this phone !
11:09:51 CELL0: Download faile,please try again!!
11:09:51 CELL0: Total download time elapsed: 0 min : 0 sec
11:09:51 CELL0: Downloading all files: Failed!
Can somebody help me on this ?
Click to expand...
Click to collapse
i think u didnt installed drivers in your computer properly
Error during flashing my device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am getting an error
12:36:20 CELL0: YGDP_Download_Platform Software Version: Customer - <V2.13_130522_02>
12:36:20 CELL0: Cell 0 USB address is: 7&217b66a1&0
12:36:32 CELL0: Waiting for device ready ...
12:36:34 CELL0: Init download info ...
12:36:34 CELL0: Start to parse partition info ...
12:36:34 CELL0: Init complete! Start ...
12:36:34 CELL0: Download Started...
12:36:34 CELL0: Downloading CPB:
12:36:34 CELL0: Init DownQueue...
12:36:34 CELL0: Device connected, start to download ...
12:36:34 CELL0: Check device ...
12:36:34 CELL0: Current phone does not support cid query cmd, skip!
12:36:34 CELL0: Check CID pass!
12:36:34 CELL0: Check phone pass !
12:36:35 CELL0: Current phone does not support fuse cmd, skip!
12:36:35 CELL0: Phone fix pass !
12:36:35 CELL0: Switched device to upgrade mode ...
12:36:35 CELL0: Start to download CPB ...
12:36:35 CELL0: C:\Users\...\Softwares\Spice\19-March\recovery\7268rec.cpb
12:36:35 CELL0: Start to download file boot.img ...
12:36:35 CELL0: Start to write data ...
12:36:35 CELL0: Start:-263537. Offset:1049436. Size:10231808
12:36:36 CELL0: Start to check data ...
12:36:37 CELL0: Download boot.img success !
12:36:37 CELL0: Start to download file recovery.img ...
12:36:37 CELL0: Start to write data ...
12:36:37 CELL0: Start:-187761. Offset:6166145. Size:13910016
12:36:38 CELL0: Start to check data ...
12:36:39 CELL0: Download recovery.img success !
12:36:39 CELL0: Found DIY img!
12:36:39 CELL0: Fail to get start sector!
Click to expand...
Click to collapse
Can anyone help to solve this error?
Solution for i am getting error
pknissar said:
View attachment 2640048
I am getting an error
Can anyone help to solve this error?
Click to expand...
Click to collapse
Goto the deviece manager and check if there is any driver missing
Also test it when the usb debugging mode is on
If you've installed all the drivers properly may be its an compatibility issue
In this case run the YGDP software as administrator
:good:
---------- Post added at 03:33 PM ---------- Previous post was at 03:22 PM ----------
Anybody please tell me factory reset password !
Thanks in advance !
---------- Post added at 03:38 PM ---------- Previous post was at 03:33 PM ----------
akshaynalinde said:
this is thred for spice coolpad 2 and coolpad 7268 ..
i rooted this device using kingo root .. this softwere is on cnet ..
i install cmw chines recovery flashing cpb or cbp file using ygdp softwere :laugh::laugh::laugh:
and now i am installed stock rom messege bug fixed .........flshing cpb file ..
plese tell me any cynogenmod rom avaleble for this device ....
Click to expand...
Click to collapse
it will be very great if we get cynogenmod rom ,we are also looking for it,!
My Mi-496 phone stuck in boot bin screen. Normally this screen appears when volume up key + usb attached to computer for ROM flashing. But it appears when I want to ON my phone and want to go for CWM recovery.
I flashed CWM in this mode but YGDP tool fails. Kindly help me to overcome this problem.
By G.S Khokhar, Junior Member on 14th February 2016, 12:52 PM
Today 20/02/2016
After search on internet, I think I Wiped Boot Partition through CWM. Kindly provide solution for Re-Partitions or Repair Partitions.
YGDP Failure Log is as under (While Flashing ROM):
14:45:42 CELL0: Software Version: Assembly - <V3.83Beta_140509_12>
14:45:42 CELL0: Cell 0 USB address is: 8&32760b9f&0
14:45:42 CELL0: Waiting for device ready ...
14:45:44 CELL0: Init download info ...
14:45:44 CELL0: Start to parse partition info ...
14:45:44 CELL0: Init complete! Start ...
14:45:44 CELL0: Download Started...
14:45:44 CELL0: Downloading CPB:
14:45:44 CELL0: Init DownQueue...
14:45:44 CELL0: Device connected, start to download ...
14:45:44 CELL0: Check device ...
14:45:45 CELL0: Current phone does not support cid query cmd, skip!
14:45:45 CELL0: Check phone pass !
14:45:45 CELL0: Current phone does not support fuse cmd, skip!
14:45:45 CELL0: Phone fix pass !
14:45:45 CELL0: Switched device to upgrade mode ...
14:45:45 CELL0: Enter upgrade mode Success.
14:45:45 CELL0: Start to download CPB ...
14:45:45 CELL0: C:\Users\PICTS\Desktop\Coolpad\ROM\cpb files\SPICE_Mi-495_IND_VER8.0_130801_1156 bulk mesage\4.1.018.P1.130801.7268\4.1.018.P1.130801.7268.CPB
14:45:45 CELL0: Start to download file qcsblhd_cfgdata.mbn ...
14:45:45 CELL0: Start to write data ...
14:45:45 CELL0: Start:-2. Offset:68536091. Size:17656
14:45:45 CELL0: Start to check data ...
14:45:45 CELL0: Download qcsblhd_cfgdata.mbn success !
14:45:45 CELL0: Start to download file qcsbl.mbn ...
14:45:45 CELL0: Start to write data ...
14:45:45 CELL0: Start:-42. Offset:68375051. Size:322080
14:45:45 CELL0: Start to check data ...
14:45:45 CELL0: Download qcsbl.mbn success !
14:45:45 CELL0: Start to download file fat.bin ...
14:45:45 CELL0: Start to write data ...
14:45:45 CELL0: Start:-642. Offset:38347596. Size:39856128
14:45:45 CELL0: Write data fail ! Error code:5. Written:0.retry! Low:328192, high:0
14:45:45 CELL0: Write data fail ! Error code:5. Written:0.
14:45:45 CELL0: Fail to download fat.bin !
14:45:50 CELL0: Download faile,please try again!!
14:45:50 CELL0: Total download time elapsed: 0 min : 6 sec
14:45:50 CELL0: Downloading all files: Failed!
(While Flashing CWM):
14:46:06 CELL0: Software Version: Assembly - <V3.83Beta_140509_12>
14:46:06 CELL0: Cell 0 USB address is: 8&32760b9f&0
14:46:06 CELL0: Waiting for device ready ...
14:46:08 CELL0: Init download info ...
14:46:08 CELL0: Start to parse partition info ...
14:46:08 CELL0: Init complete! Start ...
14:46:08 CELL0: Download Started...
14:46:08 CELL0: Downloading CPB:
14:46:08 CELL0: Init DownQueue...
14:46:08 CELL0: 4.1.039
14:46:08 CELL0: Device connected, start to download ...
14:46:08 CELL0: Check device ...
14:46:08 CELL0: Current phone does not support cid query cmd, skip!
14:46:08 CELL0: Check phone pass !
14:46:08 CELL0: Current phone does not support fuse cmd, skip!
14:46:08 CELL0: Phone fix pass !
14:46:08 CELL0: Switched device to upgrade mode ...
14:46:08 CELL0: Enter upgrade mode Success.
14:46:08 CELL0: Start to download CPB ...
14:46:08 CELL0: C:\Users\PICTS\Desktop\Coolpad\ROM\cpb files\7268rec.cpb
14:46:08 CELL0: Start to download file boot.img ...
14:46:08 CELL0: Start to write data ...
14:46:08 CELL0: Start:-263537. Offset:1049436. Size:10231808
14:46:09 CELL0: Start to check data ...
14:46:10 CELL0: Download boot.img success !
14:46:10 CELL0: Start to download file recovery.img ...
14:46:10 CELL0: Start to write data ...
14:46:10 CELL0: Start:-187761. Offset:6166145. Size:13910016
14:46:12 CELL0: Start to check data ...
14:46:13 CELL0: Download recovery.img success !
14:46:13 CELL0: Found DIY img!
14:46:13 CELL0: Fail to get start sector!
14:46:18 CELL0: Quite upgrade mode ...
14:46:18 CELL0: Upgraded. Please remove device.
14:46:18 CELL0: Total download time elapsed: 0 min : 10 sec
14:46:18 CELL0: Downloading all files: Successful!
Kindly help!
My Nitro A311 suddenly stopped working and came into bootloop. I went into TWRP recovery and tried to factory reset, flash a custom ROM and restore a nandroid backup but none of them worked. Every time, it showed the error of unable to mount cache, data and system. The File Manager shows the size to be zero. I think even the partitions somehow got deleted.
I tried YGDP tool too. The process completed in just 2 minutes but the problem still persisted.
Here is the message logger for the YGDP tool.
15:15:34 CELL0: Software Version: Assembly - <V3.83Beta_140404_06>
15:15:34 CELL0: Cell 0 USB address is: com5
15:15:34 CELL0: Start Download.
15:15:34 CELL0: Download Started...
15:15:34 CELL0: Downloading CPB:
15:15:34 CELL0: Init Connect Arg.
15:15:34 CELL0: Downlaod DA Start.
15:15:37 CELL0: Downlaod DA Success.
15:15:37 CELL0: This CPB for the Phone don't support Check CID.
15:15:37 CELL0: Verify is Partition be Changed.
15:15:37 CELL0: Partition is not Changed.
15:15:37 CELL0: Get Usb Status Success.
15:15:37 CELL0: Read YL-Parames Partition Start.
15:15:38 CELL0: Read YL-Parames Partition Success.
15:15:38 CELL0: Check between YL-Parames Partition and PhoneInfo Start.
15:15:38 CELL0: Check between YL-Parames Partition and PhoneInfo Success.
15:15:38 CELL0: Init BackUp Table.
15:15:38 CELL0: Read BackUp File Start.
15:15:44 CELL0: Read BackUp File Success.
15:15:44 CELL0: Start Download CPB.
15:17:01 CELL0: Download CPB Success.
15:17:01 CELL0: Download Read BackUp File Start.
15:17:01 CELL0: Download Read BackUp File Success.
15:17:02 CELL0: DisConnect.
15:17:22 CELL0: Total download time elapsed: 1 min : 48 sec
15:17:22 CELL0: Downloading CPB: Successful!
Is there any way I can restore my TWRP backup or flash a new ROM?
bro you didn't choose correct model from.list
buggynotme said:
bro you didn't choose correct model from.list
Click to expand...
Click to collapse
firmwarefile.com/micromax-a311
I chose the cpb file from this link and selected the configuration as 8297W. I think that it is correct. If the model was wrong, then the process wouldn't even have completed. Instead, the process completes successfully, but the phone still remains in bootloop.
My canvas nitro a311 got stuck into a bootloop while i was flashing something using twrp. Unfortunately my twrp recovery mode also dissappeared (not opening). I tried to flash stock rom using ygdp but stucks at 98% with the error
CELL0: Check between YL-Parames Partition and PhoneInfo Failed.Error Code:11
CELL0: Check YL-Parames Partition Failed, The CPB is not for the Phone.
The phone keeps disconnecting after 10seconds or so. All the drivers are properly installed. Still of no use.
The full log of the dump is
CELL0: Software Version: Assembly - <V3.98_141222_02>
CELL0: Cell 0 USB address is: com7
CELL0: Start Download.
CELL0: Download Started...
CELL0: Downloading CPB:
CELL0: Init Connect Arg.
CELL0: Downlaod DA Start.
CELL0: Downlaod DA Success.
CELL0: Verify is Partition be Changed.
CELL0: Get Usb Status Success.
CELL0: Read YL-Parames Partition Start.
CELL0: Read YL-Parames Partition Success.
CELL0: Check between YL-Parames Partition and PhoneInfo Start.
CELL0: Check between YL-Parames Partition and PhoneInfo Failed.Error Code:11
21:16:15 CELL0: Check YL-Parames Partition Failed, The CPB is not for the Phone.
21:16:15 CELL0: DisConnect.
CELL0: Total download time elapsed: 0 min : 25 sec CELL0: Downloading CPB: Failed!
Earlier i have used the same CPB file many times to flash.
At 98% phone disconnects. It happens everytime
Please reply ASAP. Its very Important. Ask if any details needed
firelordfld said:
My canvas nitro a311 got stuck into a bootloop while i was flashing something using twrp. Unfortunately my twrp recovery mode also dissappeared (not opening). I tried to flash stock rom using ygdp but stucks at 98% with the error
CELL0: Check between YL-Parames Partition and PhoneInfo Failed.Error Code:11
CELL0: Check YL-Parames Partition Failed, The CPB is not for the Phone.
The phone keeps disconnecting after 10seconds or so. All the drivers are properly installed. Still of no use.
The full log of the dump is
CELL0: Software Version: Assembly - <V3.98_141222_02>
CELL0: Cell 0 USB address is: com7
CELL0: Start Download.
CELL0: Download Started...
CELL0: Downloading CPB:
CELL0: Init Connect Arg.
CELL0: Downlaod DA Start.
CELL0: Downlaod DA Success.
CELL0: Verify is Partition be Changed.
CELL0: Get Usb Status Success.
CELL0: Read YL-Parames Partition Start.
CELL0: Read YL-Parames Partition Success.
CELL0: Check between YL-Parames Partition and PhoneInfo Start.
CELL0: Check between YL-Parames Partition and PhoneInfo Failed.Error Code:11
21:16:15 CELL0: Check YL-Parames Partition Failed, The CPB is not for the Phone.
21:16:15 CELL0: DisConnect.
CELL0: Total download time elapsed: 0 min : 25 sec CELL0: Downloading CPB: Failed!
Earlier i have used the same CPB file many times to flash.
At 98% phone disconnects. It happens everytime
Please reply ASAP. Its very Important. Ask if any details needed
Click to expand...
Click to collapse
Same problem here also please help him and me both ASAP.
Sent from my YU5010 using Tapatalk
please help us same issue i have a311 tried all cpb roms, Customer care also cant fix
:crying::crying:crying:
shivam883 said:
Same problem here also please help him and me both ASAP.
Sent from my YU5010 using Tapatalk
Click to expand...
Click to collapse
a311 stop at 83% ........same problem................please help
Found solution... Reboot into fastboot mode, hold both volume buttons and power on... Flash preloader.bin using fastboot... Then flash rom using sp flash tool.. My insta @SSidhantgupta
I recently left my micromax a311 (3g) unused for a while, then when I recharged it I found that it's bricked, it only show logo and never open the system, and when I plug the charger it shows the battery sign but doesn't progress.
anyway I did hard reset from the recovery then downloaded stock rom Micromax_A311_V1_111114_(by_xdafirmware.com).zip from firmwarefile.com, but it show failed on writting the rom, here is the complete log:
20:12:24 CELL0: Software Version: Assembly - <V3.98_141222_02>
20:12:24 CELL0: Cell 0 USB address is: com37
20:12:24 CELL0: Start Download.
20:12:24 CELL0: Download Started...
20:12:24 CELL0: Downloading CPB:
20:12:24 CELL0: Init Connect Arg.
20:12:24 CELL0: Downlaod DA Start.
20:12:27 CELL0: Downlaod DA Success.
20:12:27 CELL0: Verify is Partition be Changed.
20:12:27 CELL0: Get Usb Status Success.
20:12:27 CELL0: Read YL-Parames Partition Start.
20:12:28 CELL0: Read YL-Parames Partition Success.
20:12:28 CELL0: Check between YL-Parames Partition and PhoneInfo Start.
20:12:28 CELL0: Check between YL-Parames Partition and PhoneInfo Success.
20:12:28 CELL0: Init BackUp Table.
20:12:28 CELL0: Read BackUp File Start.
20:13:16 CELL0: Read BackUp File Success.
20:13:16 CELL0: Mach Storage Type is Successful.
20:13:16 CELL0: startAddr 5f000000, format length 34b300000
20:13:23 CELL0: Format Device Success.
20:13:23 CELL0: Start Download CPB.
20:15:53 CELL0: Download CPB Failed.
20:15:53 CELL0: ERROR:1041
20:15:53 CELL0: DisConnect.
20:16:13 CELL0: Total download time elapsed: 3 min : 49 sec
20:16:13 CELL0: Downloading CPB: Failed!
anyone may have a hint about this problem plz
canvas a311 bricked
i also have same problem sir(download cpb failed) please help us...............
surendradhruwanshi said:
i also have same problem sir(download cpb failed) please help us...............
Click to expand...
Click to collapse
Did u used YGPD flashing tool try this. with proper instructions.
Frm thiz.. search on google.✓
Micromax Canvas A311/A310 Unbricking Guide from mthdev
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You can see the results...open and follow the instructions.
:good: and see if it works then reply me first.