Hello, i hope somebody can help me.
i installed the 19s Stock on my X821 via TWRP.
Now i want back to custom and when i want to delete the sorage it says its not mounted and its not possible to mount.
I tried very much.
-Go to stock Recovery and flashed
-Try to refresh TWRP
But everytime the same Problem.
Somebody knows how to deal with that Problem?
(I heard it is encrypted? Or womething like that...)
Best Regards from Germany
Weberp7593
The Indian ROMs are encrypted, and TWRP will ask for the encryption key. When it does, you have to tap cancel and hope for it to work. If if doesn't work, just reboot recovery (you can so so from TWRP itself) and try again, it will eventually work. You may have to reboot recovery between (usually) 2 and 5 times (I had to do it around 10 times once) but it always works.
Thank you so much it worked!
Related
Help me please, I have my Le Max 2 bricked, I got it already with twrp and rom cuoco installed, everything working perfectly when I decided to change the rom and put the small eui, so that during the configuration of the aroma I ended up selecting to clean everything I installed the flashback 1.9, I did the procedures and everything was happening without problems, after installing the twrp of the cuoco I tried to flash the small eui Again and again without success and then things got worse because the device started to stay in bootloop then with the blue led on, so I started to search here in the forum a solution, and I saw the recovery twrp 5.8 teamspain, and I did The installation by fastboot (since it is the only thing I have access to at the moment), and I managed to flash the twrp, I did the reinstall procedure of the cuoco rom, everything was going well and nothing from bootloop until when i I started the system in the part of choosing the language I took a while to make the settings and when I came back it was already the device with the screen erased and with blue led again, already tried to reinstall the rom by flashone and without success, already tried to install the Twrp again and nothing too, I do not know what to do being that I only have the fastboot to try something, can anyone help me? I do not know what to do here in a topic that could extract a rec.img from the zip of eui.58.014s but I do not find this rom for download nor the zip file, if anyone can help me I'll be grateful. Well, I'm giving up hope and sorry for English.
RaphaBraga23 said:
Help me please, I have my Le Max 2 bricked, I got it already with twrp and rom cuoco installed, everything working perfectly when I decided to change the rom and put the small eui, so that during the configuration of the aroma I ended up selecting to clean everything I installed the flashback 1.9, I did the procedures and everything was happening without problems, after installing the twrp of the cuoco I tried to flash the small eui Again and again without success and then things got worse because the device started to stay in bootloop then with the blue led on, so I started to search here in the forum a solution, and I saw the recovery twrp 5.8 teamspain, and I did The installation by fastboot (since it is the only thing I have access to at the moment), and I managed to flash the twrp, I did the reinstall procedure of the cuoco rom, everything was going well and nothing from bootloop until when i I started the system in the part of choosing the language I took a while to make the settings and when I came back it was already the device with the screen erased and with blue led again, already tried to reinstall the rom by flashone and without success, already tried to install the Twrp again and nothing too, I do not know what to do being that I only have the fastboot to try something, can anyone help me? I do not know what to do here in a topic that could extract a rec.img from the zip of eui.58.014s but I do not find this rom for download nor the zip file, if anyone can help me I'll be grateful. Well, I'm giving up hope and sorry for English.
Click to expand...
Click to collapse
Are you able to boot into TWRP recovery again? When you were in TWRP, did you do wipes first before tryin to install a ROM?
Yes I did the wipes, so now I do the twrp flash only that nothing happens, type appears until the installation all right but at the moment of starting the twrp it erases the screen and the blue led
Try EUI or LineageOS that I have linked below. Both are for the x829:
https://drive.google.com/drive/folders/0B_jI7m27ljxhVmtQWmx5NVF3NzA?usp=sharing
It might be helpful if you make of video showing what you are attempting, and what is happening on the screen of your phone too.
You might want to reinstall coco twrp. Also make sure the rom you flash has downloaded fully(that happened to me a few times, corrupt downloads). If rom file is OK it should flash correctly, otherwise you get the blue led
Sent from my Le X829 using Tapatalk
luisoman2000 said:
You might want to reinstall coco twrp. Also make sure the rom you flash has downloaded fully(that happened to me a few times, corrupt downloads). If rom file is OK it should flash correctly, otherwise you get the blue led
Sent from my Le X829 using Tapatalk
Click to expand...
Click to collapse
I have the official version twrp running on my X829. It works flawlessly.
https://twrp.me/devices/leecolemax2.html
Specifically ----------> https://dl.twrp.me/x2/twrp-3.1.1-0-x2.img.html
Hey, new here....
So a while back a rooted my phone, which I followed a tutorial and all was fine, my phone has been fine. But today I decided I didn't want it rooted anymore and just wanted a clean install asif the phone was brand new, so I went into backup in settings and pressed complete system reboot and confirmed...
Then after a few minutes it send med to my team win recovery project recovery (the custom recovery I had flashed in order to root)
And so on there I reinstalled backup...
But now basically im stuck in a total loop where it will not let me do anything except load up twrp! =(
Even when I switch off and back on just straight to twrp... I have done "wipe" option, done "restore" option to no avail.
I want to get rid of twrp and just clean install nougat, is there anway I can do or have I ruined my phone?
Many thanks anyone who can help...
louiewm said:
Hey, new here....
So a while back a rooted my phone, which I followed a tutorial and all was fine, my phone has been fine. But today I decided I didn't want it rooted anymore and just wanted a clean install asif the phone was brand new, so I went into backup in settings and pressed complete system reboot and confirmed...
Then after a few minutes it send med to my team win recovery project recovery (the custom recovery I had flashed in order to root)
And so on there I reinstalled backup...
But now basically im stuck in a total loop where it will not let me do anything except load up twrp! =(
Even when I switch off and back on just straight to twrp... I have done "wipe" option, done "restore" option to no avail.
I want to get rid of twrp and just clean install nougat, is there anway I can do or have I ruined my phone?
Many thanks anyone who can help...
Click to expand...
Click to collapse
Flash stock nougat rom using spflash tools. that should fix it. if that doesnt work install marshmallow
louiewm said:
Hey, new here....
So a while back a rooted my phone, which I followed a tutorial and all was fine, my phone has been fine. But today I decided I didn't want it rooted anymore and just wanted a clean install asif the phone was brand new, so I went into backup in settings and pressed complete system reboot and confirmed...
Then after a few minutes it send med to my team win recovery project recovery (the custom recovery I had flashed in order to root)
And so on there I reinstalled backup...
But now basically im stuck in a total loop where it will not let me do anything except load up twrp! =(
Even when I switch off and back on just straight to twrp... I have done "wipe" option, done "restore" option to no avail.
I want to get rid of twrp and just clean install nougat, is there anway I can do or have I ruined my phone?
Many thanks anyone who can help...
Click to expand...
Click to collapse
All you got to do is download sp_flash tool latest version, load the scatter file of rom, then simply go to options and then click to Connection, set usb speed to full speed, and Battery to w/o battery. Then make sure you have selected all the files needed to flash, next click the start button and connect your elephone while holding the volume + button. It will take a quite while but it will be successful.
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM (Eastern Time): I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
RyokoOnXDA said:
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM: I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
Click to expand...
Click to collapse
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
I managed to get into recovery. I don't know how to flash Android 7.0 for my Aristo, though.. so I'm researching it.
EDIT: Got a ROM flashed. Everything working now.
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
Sent from my LGE LM-X220 using XDA Labs
Hi there,
Not sure what happened - I'm using my Tab S3 (SM-T820) for ages in the same (stable) configuration - rooted Stock, no changes/installations for months.
This morning it was in Odin/Download mode and I cannot boot into system.
I can get into recovery (TWRP), but I cannot boot into system from there either, it always returns to Odin (tried wiping Cache/Dalvik, didn't help).
For now my only idea is to let it completely discharge, charge again and give it another try.
No buttons appear to be stuck.
Any ideas or suggestions, eg sth I could check in TWRP to see what's going on?
(hopefully nothing wrong with the system partition).
Note - I'm only familiar with the typical TWRP functions needed to install custom firmware, haven't used it for much else. Obviously would prefer not to destroy my (stable) setup and spent a full day re-installing everything
Thanks a lot for your help everyone!
@Whoooo? Backup whatever possible with TWRP onto external storage (SD or OTG).
Check if file manager can access download/DCIM folders and save them as well.
Although the charging thing might help I wouldn't set my hopes to high.
Probably somethings wrong with system or boot partitions or any file needed by them.
I'm afraid you will have to reflash stock via Odin, root again and try if restoring TWRP saved Data works.
That would reduce setting up time.
bmwdroid said:
@Whoooo? Backup whatever possible with TWRP onto external storage (SD or OTG).
Check if file manager can access download/DCIM folders and save them as well.
Although the charging thing might help I wouldn't set my hopes to high.
Probably somethings wrong with system or boot partitions or any file needed by them.
I'm afraid you will have to reflash stock via Odin, root again and try if restoring TWRP saved Data works.
That would reduce setting up time.
Click to expand...
Click to collapse
Hi there,
Thanks a lot for your reply - yes, I will try that once the complete discharge is finished.
Reflashing stock - could cause this any troubles as it's already unlocked/rooted?
Or is there a chance dirty flashing the Tweaked Stock ROM could work, too?
Tablet was still on the original Stock it came with, but rooted with magisk and manually debloated...
Thanks again!
I think Odin won't care about unlocked bootloader.
But might be necessary to unlock again.
Dirty flashing afaik only works with TWRP so only flashing of zip or img files possible.
Except you sideload although Idk if that's possible on Samsungs.
Dirty flashing of a before the problem arose made backup might work.
Did you debloat while already installed or externally?
What file format does it have?
My T825 uses the debloated ROM by rorymc628 which can be flashed with TWRP as it's a zip file.
bmwdroid said:
I think Odin won't care about unlocked bootloader.
But might be necessary to unlock again.
Dirty flashing afaik only works with TWRP so only flashing of zip or img files possible.
Except you sideload although Idk if that's possible on Samsungs.
Dirty flashing of a before the problem arose made backup might work.
Did you debloat while already installed or externally?
What file format does it have?
My T825 uses the debloated ROM by rorymc628 which can be flashed with TWRP as it's a zip file.
Click to expand...
Click to collapse
Hi there and thanks again -
Took me a while to try everything but finally it's working again.
Complete battery drain didn't help, but dirty flashing did - once I got the correct version.
Basically made a nandroid backup, then flashed the tweaked rom over my existing one, starting with newer versions down to older ones.
So, flash, reboot - didn't work, restore nandroid (all), flash slightly older rom....
Till it started booting with v2.0 (probably matching my existing rom close enough).
Had to reflash Magisk as the 2.0 Rom included didn't match my Magisk Manager, but now my Tab S3 is working again!
i tried to flash a custom rom (DotOs) on the device, but when I had to wipe all data (on TWRP) before installing the zip, the option to wipe System and Vendor wasnt there, so I selected the options I had except internal storage. I figured it was fine and attempted to flash the rom and reboot anyways. who would ve guessed it was a terrible idea? clearly not me...
how do I get it back to a usable state and, possibly, manage to install the custom os properly? any help is appreciated.
h0rnyavocado said:
i tried to flash a custom rom (DotOs) on the device, but when I had to wipe all data (on TWRP) before installing the zip, the option to wipe System and Vendor wasnt there, so I selected the options I had except internal storage. I figured it was fine and attempted to flash the rom and reboot anyways. who would ve guessed it was a terrible idea? clearly not me...
how do I get it back to a usable state and, possibly, manage to install the custom os properly? any help is appreciated.
Click to expand...
Click to collapse
Maybe here you find an answer https://forum.xda-developers.com/f/xiaomi-mi-11-lite-5g.12189/
joke19 said:
Maybe here you find an answer https://forum.xda-developers.com/f/xiaomi-mi-11-lite-5g.12189/
Click to expand...
Click to collapse
i could not. it looks like that to unbrick xiaomi devices you can use Mi flash tool program to flash the original firmware, but my Mi flash won t work or recognise my device, here s what it says(first pic):
i even tried on another computer but gave me the same error. older versions dont seem to work either... even xiaomi mi tool v2 couldnt help, and although it did recognize the phone, it gets an error too. here it is:
is there any other way before I try EDL mode?
Net Framework installed? Maybe a runtime error