Related
Hi , this is My Contribution for Neo L device , i make this kernel use Latest source from Sony , All What you want is available in this kernel :victory:
dont look my status as Junior Member , i never use this account since first use , So look this , dont surprised . . . . this is my first post about development , my post looks Bad
im very thanks to mechmetal for Amazing source Build , so Here we go. . . .this build i get a permissions from Mechmetal ,im very thanks for it
FUSION™ Kernel For Phoenix
/*DISCLAIMER
#include /*
* Your warranty is now void.. LOL I guess you knew it already.*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone
* bootloops and alarm does not go off. Please do some research if you have any
* concerns about features included in my kernel before using it! YOU and only
* YOU are choosing to make these modifications.*/
1.CHANGELOG
-New COOL BOOTLOGO!! , Created By me !! Fajar jarbu
-Add SFB Net Scheduler
-Allow CPU Unaligned Access
-ARM JIT Compiler For Packet Filters
-Based On 4.1.b.0.621 (LATEST for Neo L!!! by jarbu)
-CPU VDD Levels Sysfs Interface
-Cpus NEON & Snapdragon Optimizations
-Optimized ARM RWSEM Algorithm-Optimized CRC32 Algorithm
-Proportional Rate Reduction For TCP
-Reclaim Some Ram
-Add Governors
- InteractiveX,Smartassv2
-Add IO Schedulers
- SIO,V(R)
-Update Android Drivers
-Update Jhash(Mark 2 & Non Mark)
-Update Linux Kernel To 2.6.32.60(LATEST!!)
-Update LZO
-Various Other Patches, Tweaks, Fixes...etc
-FIX Bluetooth
-FIX WIFI
-Add Snappy Compression Support For zRAM
-Apply Patches To RCU
-Change Memory Allocation Method
-Change Memory Split Method
-Enable CFQ I/O Scheduler
-Set Correct Default Min/Max CPU Frequency
-Switch To Snappy Compression For zRAM From Default LZO
-Update CWM To 6.0.3.0
-Update Snappy Drivers-CROSS BREDEER Support!
-Enable KSM For Page MErging
-DynaMic Compresion for page Caching
-OC Up to 1.6 Ghz
-Update KSM
-update LMK
-2 way Call recording
-Joystick wireless
-reconfigured Again in ALL Version
Compiled with GCC LINARO TOOLCHAIN 4.7.3
GOOD CONFIGURATION
SMARTASSv2 + SIO
*Download Link
Version v4
http://d-h.st/9gS
Version v4.1
https://www.dropbox.com/s/sxm01ypmwty4jha/Fusion v4.1.img
Version 4.2
https://www.dropbox.com/s/pvuxui4s20yufwl/Fusion v4.2.img
Link kernel Fusion™ v4.5 (Status : STABLE)(Bugfixes on v4.4 ,RAM increase again 379 before 377 )
https://www.dropbox.com/s/q1huyqpf2oojqq3/Fusion-v4.5.img
Link kernel Fusion™ v4.6 Shingeki No Kyojin Edition (Sliming Kernel For More performance and stability)
https://www.dropbox.com/s/8bnz1gbgj36vkkq/Fusion-v4.6-Mikasa.img
Fusion ULTIMATE™ L5-770T
http://d-h.st/JMQ
++++++++++++++++++++++++++++
---CONTINUED PROJECT New Version L5-770T Fusion Ultimate™
++++++++++++++++++++++++++++
FOR OTHER Build go to This gruop
https://www.facebook.com/notes/offi...22-fusion-neo-l-all-fixed-new/340102672799625
-----------------------------
Sources
587+this Tarball http://www.mediafire.com/download/477s0cs1sogavj4/Patch.tar.xz
----------------------------
If You Like My Work , Just HIT THANKS
CREDIT
-Mechmetal(Kernel)
-Wedgess(for tweak and load module)
-Cruizz xda(my teacher
-matt khojim(for link refrences)
-Anonym0us(For Some Help)
-Vishal Android Freaks (For Help)
-Tom As senior moderator for permissions post
and many more, iam forgett just PM me:good:
awesome kernel
Semangat om,this kernel is very good and stable. i use this kernel in cusrom sjb 8. very stable not random reboot. salam from lampung
Kibajuki said:
Semangat om,this kernel is very good and stable. i use this kernel in cusrom sjb 8. very stable not random reboot. salam from lampung
Click to expand...
Click to collapse
thank's for ur feedback , ill do the best for this
Is it possible to develop for booting android 4.2 nd 4.3???
Sent from my MT25i using xda app-developers app
Great job man....
you are rock,....
awesome new kernel for phoenix :good::good::good:
kalel2012 said:
awesome new kernel for phoenix :good::good::good:
Click to expand...
Click to collapse
hit thanks to master superman
Ankurcul said:
Is it possible to develop for booting android 4.2 nd 4.3???
Sent from my MT25i using xda app-developers app
Click to expand...
Click to collapse
Yup.. It's WIP by me.. And il surely help the op to get it ported to neo L if i succeeded..
By the way, congrats.. :beer:
Regards,
vishal_android freak
ronii ahmad said:
Great job man....
you are rock,....
Click to expand...
Click to collapse
hell yeahh dude
gr8 hands job mister
vishal_android freak said:
Yup.. It's WIP by me.. And il surely help the op to get it ported to neo L if i succeeded..
By the way, congrats.. :beer:
Regards,
vishal_android freak
Click to expand...
Click to collapse
thank u for some help mate ,
atmodimejad said:
gr8 hands job mister
Click to expand...
Click to collapse
thank you mister , put hands up uyee haha
Keep your great job vroh..:highfive:
BeYoung_CareRockz said:
Keep your great job vroh..:highfive:
Click to expand...
Click to collapse
yes bro , no problemo
ronii ahmad said:
asem disini banyak yg bully
Click to expand...
Click to collapse
not me, just same . . . assseloleee
Thread cleaned. Starting from now I want to see posts only in English, comprende?
vishal_android freak said:
Yup.. It's WIP by me.. And il surely help the op to get it ported to neo L if i succeeded..
By the way, congrats.. :beer:
Regards,
vishal_android freak
Click to expand...
Click to collapse
wow...wow..there is someone who will help you bro dev @Jarbu12 for kernel JB 4.2 or 4.3 :good:
it's cool man
Great!!! I hope this wonderful kernel will grow more better bro dev.
May GOD bless you my bro.
eagleeyetom said:
Thread cleaned. Starting from now I want to see posts only in English, comprende?
Click to expand...
Click to collapse
sorry for that Mate ,
broim kaskus said:
wow...wow..there is someone who will help you bro dev @Jarbu12 for kernel JB 4.2 or 4.3 :good:
it's cool man
Great!!! I hope this wonderful kernel will grow more better bro dev.
May GOD bless you my bro.
Click to expand...
Click to collapse
yeahh , i hope i can build 3.4.x use nAa source but there no zeus board config , its to hard for me , anyone to help me ill be apreciated
Dev @wedges is the one of a great developer for xplay. Try to contact him my bro dev @Jarbu12. I hope he will help you too.
Sent from my HTC One X using xda app-developers app
Code:
/*
* Your warranty is now void.
*
* I will not accept responsibility for any adverse effects to your device,
* including, but not limited to: bricking, dead SD card, bootloops etc.
*
* You mod your device at your own risk.
*/
Download
Test1.zip - [30/06/14]
Main Features
Code:
[B]Build Optimisation:[/B]
[LIST]
[*]Linaro 4.10 Toolchain
[*]Specific build for Exynos 5420
[/LIST]
[B]New Functionality[/B]
[LIST]
[*]Colour Control
[*]init.d support
[*]UKSM
[*]Frandom
[*]FSync
[*]Kernel in Neon Mode
[*]ARM Optimised Encryption Libraries
[*]Power Efficient Workqueues
[*]Wacom QoS Configurable interface
[*]New Power Suspend Driver
[*]WiFi Power Management
[*]Thermal Control
[/LIST]
[B]Performance & Efficiency[/B]
[LIST]
[*]CPU Voltage Control
[*]GPU Overclocked to 733MHz
[*]GPU Voltage Control
[*]INT/MIF Optimisations & OC to 933MHz
[*]Increased Readahead (1024/64)
[*]Lots of VM Optimisations for smoother system & better battery life!
[*]Lots of unnecessary debugging disabled to improve memory efficiency
[*]VFP - Neon-vfpv4 & Hard Float
[*]"sched_mc_power_savings = 2"
[*]ARM Topology Updates
[*]LPM Governor Fix
[*]Upstream Improvements
[/LIST]
[B]Filesystem[/B]
[LIST]
[*]NTFS Read / Write
[*]CIFS
[/LIST]
[B]Security[/B]
[LIST]
[*]SELinux Permissive
[*]Network Hardening (init.rc tweaks, IPV4 MD5 suopport, TCP SYN Cookies DDoS defence )
[*]Futex Patches from Android 4.4.4
[*]ARM Optimised Encryption Libraries
[*]Upstream Security Enhancements
[/LIST]
... And loads more!
Click to expand...
Click to collapse
Donate
If you like my kernels you cab donate by pressing the "Donate to Me" button below my name on the left hand side. I spend a lot of my spare time putting these kernels together for the community and every penny is greatly appreciated .
Thanks
A big thanks to halaszk88, franciscofranco, labodj, faux123, neobuddy89, myfluxi, and everyone else from whom I cherry-pick liberally
Enjoy
XDA:DevDB Information
Xluco Kernel [SM-P601], Kernel for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
xluco
Kernel Special Features:
Version Information
Status: Testing
Created 2014-06-30
Last Updated 2014-06-30
Hi xluco Unfortunately the system got unstable after flashing this kernel.
No posts, no developments, dead thread, waiting hopeless, please delete this thread moderator
mali76 said:
No posts, no developments, dead thread, waiting hopeless, please delete this thread moderator
Click to expand...
Click to collapse
I'm very busy right now with my exams and my proposal, but will definitely help Xulco out in development of this kernel asap, so don't worry,be happy and have a little faith
I've been using this kernel for a day I can say that it is pretty stable. The only thing I did not find is NTFS support, cause my hard drive has not been recognized by OS. Paragon NTFS couldn't detect root on my device (it is rooted, believe me) and there's nothing can be found about SELinux status in system information. I use Hydronium and my m8 from 4pda.ru uses UXProject and picture is the same. So it's unlikely ROM related.
But besides this the kernel looks to be good alternative to stock kernel.
Hope that update will follow soon :good:
Yes also besides ntfs hdds not working,bluetooth isnt working
hey sorry guys, I thought I'd deleted this thread and this 'project' all together :/ I had renamed the thread in 'original development' 600/601 so I dunno whats going on anyway, if you've tested the zip and its unstable I'd be grateful if everyone could share their kernel logs etc as I dont have a 601 to test things on
mali76 said:
No posts, no developments, dead thread, waiting hopeless, please delete this thread moderator
Click to expand...
Click to collapse
Not to sound like a d**k mate but you posted the same thing in both threads saying the system was unstable with no other information, you post in this thread after I've said in the other thread that I thought I deleted this on, you attach no logs or any kind of useful information, you didn't respond to my reply to you asking for them and then say youre waiting hopeless.
Maybe I've taken your comment the wrong way but I do actually have a life beyond XDA, like the description in the original thread says, I'm compiling this kernel for my own use, not really anyone else, I just put it on here because the only other kernel dev has had his device bricked. The fact that I'm spending my personal time now making a kernel for a device I don't even own (601), on top of trying to fit in a full time job and a masters degree should show you I'm trying to be a pretty decent guy, so maybe extend the same courtesy to me instead of getting irate and not replying when I ask for more information on how I can help you.
egotheist said:
I've been using this kernel for a day I can say that it is pretty stable. The only thing I did not find is NTFS support, cause my hard drive has not been recognized by OS. Paragon NTFS couldn't detect root on my device (it is rooted, believe me) and there's nothing can be found about SELinux status in system information. I use Hydronium and my m8 from 4pda.ru uses UXProject and picture is the same. So it's unlikely ROM related.
But besides this the kernel looks to be good alternative to stock kernel.
Hope that update will follow soon :good:
Click to expand...
Click to collapse
Thanks for the info I'm working on a complete rebase of the 600 kernel at the mo which is taking a bit of time, but should give us a great, stable platform to move forward from on both devices, stay tuned haha
So as a conclusion when will you release the stable version?
iPhone 'den Tapatalk aracılığı ile gönderildi
mali76 said:
So as a conclusion when will you release the stable version?
Click to expand...
Click to collapse
As soon as it's ready.
Chill out man and show some respect for f***'s sake.
P.S. Bluetooth works, btw.
Yes. I tried on another rom. Now bt works. Only nonworking thing is ntfs support for now
iPhone 'den Tapatalk aracılığı ile gönderildi
mali76 said:
Yes. I tried on another rom. Now bt works. Only nonworking thing is ntfs support for now
iPhone 'den Tapatalk aracılığı ile gönderildi
Click to expand...
Click to collapse
Works great with Hyperdrive ROM! thanks!
xluco said:
hey sorry guys, I thought I'd deleted this thread and this 'project' all together :/ I had renamed the thread in 'original development' 600/601 so I dunno whats going on anyway, if you've tested the zip and its unstable I'd be grateful if everyone could share their kernel logs etc as I dont have a 601 to test things on
Click to expand...
Click to collapse
I have SM-P601 and I'm C++/Java developer, could you please share how to recompile/modify kernel. Where to start from?
file cannot be read....
please re-up the file or change file server.
i download many times but file cannot be read...
Bump for XDAdevelopers and the p601
I just want to learn how to modify kernel and add new modules and features like hid cdrom mac80 zram and so forth thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Flashing unofficial mods will void your warranty.
* You flash this kernel at your own risk.
* I will not accept responsibility for any adverse effects to your device,
* including, but not limited to: bricking, damaged SD card, bootloops, loss of data, etc.
*/
Well as you can actually see , this is a kernel for SM-P601 ( lt033g ) and SM-P600 ( lt03wifi ) which is for both TouchWiz lollipop ( Versions 1B to 6 ) ROMs And AOSP Nougat ROMs ( Version 7 & For both Bootloader Versions !! ) So please do not install it on other AOSP ROMs no matter being MM / Lollipop. my goal is to get the best performance keeping battery in mind Also , Please keep in mind that I'm not a Real Dev ... I just love tinkering with these kinds of things
Code:
[B][U]July 24th :[/U][/B]
[B][U][SIZE="4"][CENTER]# Prime V8 is Released #[/CENTER][/SIZE][/U][/B]
* Based on The latest Deathly for highest compatibility with the latest ROMs ( Thanks @TE5420 ! )
* New CPU Gov Modifications
* Kernel WQ Improvements for better efficiency
* New X-Box controller Driver implemented
* New CPU Boost Algorithm implemented
* Better Profiling system included
* ISO FS Compatibility added
* New " Event-Based Short term CPU Boost " Mechanism added
* UKSM Improvements for Best compatibility
* Lots of Fixes like for SPen crushes and AIO
* Lots of other minor and major Improvements
* Both Bootloaders and Devices are covered now !
[B][U]May 13th :[/U][/B]
[P600] Small updates and fixes to make it compatible with the newest update. Also, KK builds are up again ! ;)
[B][U]April 23th :[/U][/B]
[P600] V7 modified to make it work well with Mosimchah's AICP ( Thanks to TE5420 for the fix )
[B][U]April 9th :[/U][/B]
[P600/P601] A V7 in which the Problem with SD Card recognition is Fixed to work best with new ROMs there are also some minor modifications which might cause better user experience
[B][U]March 8th :[/U][/B]
[P600/P601] A V7 equipped with the new R7P0 GPU is added ( For more info please check [URL="https://forum.xda-developers.com/showpost.php?p=68952746&postcount=3"]HERE[/URL] )
[B][U]Feb 26th :[/U][/B]
[B][U][SIZE="4"][CENTER]# Prime V7 is Released #[/CENTER][/SIZE][/U][/B]
* This Version is for AOSP Nougat ROMs Only !!
* Used Team Exynos 5420's Latest "Deathly" Source as Base ( Thanks Dear Team Exynos 5420 :good: Keep it up guys )
* Built with Optimized 5.2 ToolChain ( Thanks @Andmoreagain for both this and All your Supports :good: )
* Lollipop Bootloader Support ( esp. in "LL" Builds )
* CPU Boost Driver Added and Updated to the Latest Version
* Default MTU is set to 64K
* LZO is updated to the latest upstream Version
* Multi Page of a Directory Readahead for F2FS
* Tuned UKSM by tweaking it's CPU Usage and Squashed Updates
* Introduced New flag WQ_POWER_EFFICIENT for power oriented workqueus
* Using LZO instead of LZMA
* AIO Support
* Kernel Performance Events and Counters Added
* Profiling Support
* OProfile System Profiling
* SMT Scheduler Support
* CleanCache Driver Enabled
* DVFS Job Added
* Short Term CPU Boost Support
* XBOX Gamepad Support
* Kernel Auto Mounter Version 4 Support Added
* ISO Filesystem Support
* UDF Filesystem Support
* Full NTFS Support
* Fixed So many Problems ( Thanks to My Testers @Steveman29 and @Stogie87 for doing their Best Helping with this :good: )
[B][U]Dec 26th :[/U][/B]
[B][U][SIZE="4"][CENTER]# Prime V6 is Released #[/CENTER][/SIZE][/U][/B]
* Everything from [B]Prime V5[/B] is still Present !!
* [B]CPU is now OC / UC able from 100 MHz up to 2.0 GHz ( actually it's up to 2.1 GHz , but 2.1 GHz is unstable a bit )[/B]
* Implemented new GPU frequency / Voltage table
* Added Radeon Suspend / Resume Quirks
* Added 2MB allocation support for System_Heap
* So many Tweaks in order to make GPU snappier
* The Following New Optimizations and Boosters Added :
- [B]TCP[/B]
- WACOM
- Touch Key
* New Touch screen ' glove_mode ' added
* New Touch Screen ' epen_saving_mode ' added
[B]* Selinux is set to " Permissive " [/B]
* Allow GPU to reach even 625 mV
* Improved the performance of Some CPU Govs like ' Interactive '
* [B]UKSM[/B] is now implemented , Fixed and Updated to V 1.2.3
[B][U]Dec 4th :[/U][/B]
[B][U][SIZE="4"][CENTER]# Prime V5 is Released #[/CENTER][/SIZE][/U][/B]
* Everything from [B]Prime V4[/B] is still present !!
* [B]Upgraded to the Latest mainstream Source Code !![/B] ( a BIG Thanks to My Dear Friend , @andmoreagain for helping me with this :good: )
* So Many Newly CPU Govs [B]Added[/B] and [B]Fixed for Best Compatibility[/B] :
- Uberdemand
- SmartMax
- OndemandPlus
- Conservative X
- Abyss Plug
- Abyss Plug V2
- Badass
- Intellidemand
- Optimax
- Intelli Min Max ( Intellimm )
- Interactive X
* A Newer CPU Fre Selection Relation introduced
* Some Minor Improvements added to the Ondemand Gov
* Newer CPU workqueue Flags added
* Added more Power efficient CPU Workqueus
* Kernel is Running in NEON Mode
* BFQ v7r7 I/O Scheduler Added
* Tweaked CPU's Decision making by Userspace
* Compiled with Full NEON VFPV4 and Hard float
* Some GPU Tweaks in order to make it snappier
[B][U]Oct 31st :[/U][/B]
[B][U][SIZE="4"][CENTER]# Prime V4 is Released #[/CENTER][/SIZE][/U][/B]
* Including all [B]Prime V3[/B] Features
* [B]FIXED Not Flashing the kernel which was faced by Some Devices[/B]
* Samsung's TN Misc Features Added
* Samsungs TN Power Management
* KSM Page Merging
* Tweaked Kernel's Preemption model
* Auto Cache Cleaner Driver Added
* Better In-Kernel Swap page Compression :
More Swappiness
Enabled WriteBacks
* Linux Kernel MobiCore Support added
* GFS2 FS Support Added
* Dnotify Support
* ELF Core Dumps
* Hot-Plugable Device Support
* Analog GamePad & JoyStick Support
[B][U]Oct 20th :[/U][/B]
[P600] The Crashing problem is finally FIXED Thanks to @steveman29
[B][U]Oct 19th :
[SIZE="4"][CENTER]# Prime V3 is Released #[/CENTER][/SIZE][/U][/B]
* Including all [B]Prime V2[/B] Features
* [B]UV is Finally Added[/B]
* Interactive Gov Improvements for Performance & Better Battery Life
* .Config is now accessible from /proc
* A Bit Better Profiling than Before
* Enabled Writeback
* Even More Swappiness
* MISC Binaries Support added
* JBD Support added
* JBD Support added
* JFS Support added
* XFS Support added
* Newer Kernel Auto-Mounter ( Version 4 )
* More Useless Debugs Disabled
* Some Minor Fixes
[B][U]Sep 27th :
[SIZE="4"][CENTER]# Prime V2 is Released #[/CENTER][/SIZE][/U][/B]
* Including all [B]Prime V1B[/B] Features
* Added . Config Support
* Improved Profiling Algorithms ( OProfiling added )
* Enabled Last_KMSG
* Improved CPU Scheduling using SMT
* Added APM for better Battery Management
* Added ISO FS Support
* Added UDF FS Support
* Added EXT3 FS Support
* X-Box GamePad support ( + Rumble and LED support )
* Added Auditing Support ( + System Call Auditing )
* NEON Ext Support Added
* Improved Balance Condition
[B][U]Sep 13th :[/U][/B]
[P600] Finally[B] FIXED[/B] the Odd kernel Panics !! ( It's still having V1B's features ) :D
[B][U]Sep 8th :
[SIZE="4"][CENTER]# Prime V1B is Released #[/CENTER][/SIZE][/U][/B]
* Physical to Virtual translations Patch applied
* Using LZO instead of Gzip ( Better Performance )
* LZO Support added to Ramdisk Compression
* Profiling Support
* MultiCore Scheduler
* added these Govs :
- Conservative
- Performance
- PowerSave
* NTFS R / W Support Added
* Removed Sammy's Rooting trouble maker ;)
* Disabled some Useless Debugings
Follow these easy steps and you can do it without facing any problem :
1- You need to have the P601's Stock Lollipop 5.1.1 running
2- You need a TWRP ( I recommend the one @ShevT released it's quite nice and fast which can be found in his Thread )
3- Reboot into Recovery
4- Make a backup of your Boot ( to keep in case you wanted to revert into the stock )
5- Install My Kernel zip file
6- ENJOY :laugh:
Note : Dear Friends , Since LOS's latest update , ( Dear @Stogie87 , reported this on 24 - 03 - 2017 ) you're supposed to use the New Driver ( R7P0 one , esp. appropriate for your BL and Device Model ) ... If you use the old one , you're going to face bootloops ... But , that's no harm to your device ... just simply flash the New driver equipped version over the old one you have , and it'll be fine
P601 >
V8.0 Release - LL Bootloader
V8.0 Release - KK Bootloader
V7.2 Release - LL Bootloader
V7.2 Release - KK Bootloader
V7 Release With R7P0 GPU Driver - KK Bootloader
V7 Release With R7P0 GPU Driver - LL Bootloader
V7 Release - LL Bootloader - old GPU
V7 Release - KK Bootloader - old GPU
V6 Release
V5 Release
V4 Release
V3 Release
V2 Release
Initial Release V1-B
P600 >
V8.0 Release - LL Bootloader
V8.0 Release - KK Bootloader
V7.4 Release - AICP ROM Users #LL Bootloader#
V7.4 Release - AICP ROM Users #KK Bootloader#
V7.2 Release - LL Bootloader
V7.2 Release - KK Bootloader
V7.3 Release - AICP ROM Users
V7 Release With R7P0 GPU Driver - KK Bootloader
V7 Release With R7P0 GPU Driver - LL Bootloader
V7 Release - LL Bootloader - Old GPU
V7 Release - KK Bootloader - Old GPU
V6 Release
V5 Release
V4 Release
V3 Release
V2 Release
V1-B Release With the Panix fixed
** Dear P600 Users , As You may know , I'm not Owning a P600 Device and I'm a P601 User ... The ones who Helped me ( They actually , Helped you ) Make this available for P600 are the two users @Stogie87 and @steveman29 who are doing the Testing staff , and without their help , P600 wouldn't have been continuing so far ... Please Consider that testing is so time consuming and Super Vital for such an Experimental Project And finally , Thanks to their efforts , you can safely falsh this kernel without worrying about anything ; So , Please Feel free to show them your appreciation in any way you like ...I'm sure their efforts deserve your appreciation ... Thanks for Reading this :good:
As you may know , Using Prime Kernel , you can get much better Performance , Stability and Batterylife but there's always some Tips to use in order to make your Experience even Better Here I want to share some Good and Useful Tips
# @Stogie87 's Greenify / Xposed Setting in order to make your Device get even more Juice :laugh: #
# @pcparaosamigos 's Post Analyzing the behavior of different CPU Govs #
First of all Samsung ( Till Version 6 ) and Team Exynos 5420 ( Version 7 ) for the sources
Then comes My Dearest friend , @Andmoreagain who helped me solve the Initial problems and The great Team Exynos 5420 ( Again , because these people are Great ... We wish you guys success with Both your Future life and Future Projects :good: ) and whoever else from whom I cherry-picked liberally then comes my Dear friends @steveman29 and @Stogie87 Who are Prime Kernel's P600 Beta Testers then are TC devs in google , XDA Comunity and You Dear users
Note : Dear Friends , Mods , Devs and Users , Currently , Due to US Sanctions toward my country , I'm unable to upload my source to any hosting platform ... I have tried github / gitlab / bitbucket / some others and All I get was my country is subjected to recent US Sanctions and they are unable to offer me the requested service ... The bigger problem is their support teams stop responding as soon as they realize I'm from Iran ... So , I decided to write this note to state my situation and apologize for the inconvenience I hope they would fix this as soon as possible ... Thanks for you attention :good:
Hitman1376
XDA:DevDB Information
Prime Kernel, Kernel for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
hitman1376
Source Code: https://github.com/AMohseni76/android_kernel_samsung_exynos5420/tree/cm-14.1
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V8.0
Stable Release Date: 2017-07-24
Current Beta Version: V4
Beta Release Date: 2016-10-19
Created 2016-09-06
Last Updated 2017-08-29
Issues & Fixes
This Post is for the Issues you may encounter and the fixes I find for them ...
# Android Forgetting the WIFI Passwords after Reboot #
NOTE : Guys , Please be advised that in case you want to install and use Xposed on your P60X , you are supposed to do this process before installing Xposed in order to avoid bootloops and problematic behavior ( Thanks Dear @steveman29 for informing me about this :good: )
Code:
Actually , It seems that Xluco were facing the same in his last builds for lollipop . The reason is because the " Secure Storage " is enabled ( which acts - or at least is supposed to act - the way that secures your personal data :p ) but you can simply disable it the way I explain . Please don't forget to be rooted . Here is the way :
1 - Use a root explorer and go to this address " /system"
2 - Open the file named " build.prop " ( it's an important file to your device and OS so please don't try to change anything other than what I say ... or at least [B]Do it at your own Risk[/B] )
3 - Find the line that has " ro.securestorage.support=true " written in it
4 - Edit the line like this " ro.securestorage.support=false " ( replace "true" with "false" )
5 - Reboot your device and feel happy about fixing the problem :D
# Setting SELinux to Permissive #
Code:
1 - Be Rooted at the very first stage ( lots of guides for that ... also you shouldn't have problem because Sam's Root Restriction is gone !! )
2 - Install any Terminal app ( I have "Terminal Emulator " as a free example ... but your free in this ... )
3 - type the following commands ( just the ones on quotation marks !! ) :
a ) "su"
b ) "setenforce 0"
What about the R7P0 Kernels ?
Recently , Some ROM maintainers and Devs have updated their ROMs to the latest GPU Driver and that's the reason Why We have provided you another V7 series Kernels which are equipped with the new GPU Driver ( Those ROMs won't boot with the regular kernels ) and If you want to update to those New ROMs , You just need to use the appropriate kernels The confirmed ROMs with new GPU Driver are :
- ShevT's Nougat ROMs released on and after " March 7th 2017 " Thanks @pcparaosamigos for reporting :good:
- LD OS builds released after " March 3rd 2017 " Thanks @mosimchah on this
If you're not sure about the implementation , You can just simply ask your ROM Dev about it ... In fact , Regular V7 Doesn't boot a R7P0 compatible ROM and a R7P0 Compatible Kernel doesn't boot a Regular ROM ... Also , If you mistakenly flashed this on a non compatible ROM , You can simply flash the regular One ... It's not going to harm your device ...
I hope they fixed your problem like they fixed mine :laugh:
Thanks again for your Interest in my Project :good:
With Best Wishes
Hitman1376
Some Screenshots
Prime V6 Results
My Dear @Stogie87 's Benchmarks which are seeming quite GREAT !! ... Thanks Man :good:
Prime V5 Results
P600>
@Stogie87 's Scores and Battery Life Report( Please Thank his posts HERE ( Benchmarks ) & HERE (Battery Life Report ) ... Please consider that he is one of our testers )
@buhohitr 's Scores ( Please Thanks his post HERE )
>P601
Prime V4 Results
Thanks @Stogie87 for those ( I'll add some more soon )
My Own Benchmark Results
Allow me to ask the inevitable question!
Will this somehow work for the WiFi version aka P600? I can try it flashing it since I can recover quickly from any problems, but I would like to know if anyone have experimented like this before?
The reason for this is because I'm sure P600 owners are starving for anything new after xluco dropped kernel development.
Pact said:
Allow me to ask the inevitable question!
Will this somehow work for the WiFi version aka P600? I can try it flashing it since I can recover quickly from any problems, but I would like to know if anyone have experimented like this before?
The reason for this is because I'm sure P600 owners are starving for anything new after xluco dropped kernel development.
Click to expand...
Click to collapse
My Dear Friend , I guess it should be possible because about the architecture , they are the same so I guess yes ( actually , I tried xluco's P600 kernel for VT purpose only which worked with no problem ) ... but , you always can try ... If faced any problems , just revert back to stock ... I hope It was the answer
With Best Wishes
Hitman1376
PS. Dear all please quote me so that I can recognize you have something to ask me ... Thanks :laugh:
Heads Up !!
Dear @Pact and all other respectful P600 and P601 Users , From now on , P600 Support is added and Both Devices are going to get updated with the same Changelog and also in the same time ... But , I would really appreciate any sort of help with the testing staff especially with P600 as I don't own one ( but no problem if you can help with P601 , I really appreciate it ) ... Please Feel free to try the V1-B Kernels and return some Feed-Backs or maybe even Advice or something ... also If you'd like any especial feature to be added to next kernels , Please feel free to ask ; My plan is to update these in a week or maybe 2 ( actually depending on my free time ) so , I guess every week we are going to have a poll on the features you want me to add this is the best I guess ... I hope you find the builds Stable
With Best Wishes
Hitman1376
Can we flash on CM13?
Unfortunately ...
hipocrazy said:
Can we flash on CM13?
Click to expand...
Click to collapse
Dear Friend , I guess you haven't red the OP completely so , I'm afraid I should inform you that this is just for TouchWiz Lollipop ROMs So , Unfortunately , you shouldn't be able to make a CM13 boot using it ... ( there's always a chance to try but normally you shouldn't be able to use it on CM13 ) ...
With Best Wishes
Hitman1376
I read, but I see you've made revisions so thought I would ask. Thanks for the reply.
hipocrazy said:
I read, but I see you've made revisions so thought I would ask. Thanks for the reply.
Click to expand...
Click to collapse
No Problem ...
P600 Currently Bootloops
Hello, I know this is still in the early stages of development, but I just wanted to let you know that currently on the P600 (stock rooted lollipop with TWRP) flashing this kernel results in a bootloop. I cleared cash and dalvik, and flashed the correct zip. It reported that it had installed correctly, but rebooting the device (W/O letting TWRP try to root) resulted in a bootloop.
I just flashed the old xluco kernel, and my tab booted, so it would seem the issue lies with this kernel.
I would be glad to help you with diagnostics, but I have limited time; however, I would be glad to help how I can if you can tell me what files or steps you would like me to take.
Thank you for your time working on development for this older device!
Aerdowaith said:
Hello, I know this is still in the early stages of development, but I just wanted to let you know that currently on the P600 (stock rooted lollipop with TWRP) flashing this kernel results in a bootloop. I cleared cash and dalvik, and flashed the correct zip. It reported that it had installed correctly, but rebooting the device (W/O letting TWRP try to root) resulted in a bootloop.
I just flashed the old xluco kernel, and my tab booted, so it would seem the issue lies with this kernel.
I would be glad to help you with diagnostics, but I have limited time; however, I would be glad to help how I can if you can tell me what files or steps you would like me to take.
Thank you for your time working on development for this older device!
Click to expand...
Click to collapse
So , Finally I'm receiving Feedbacks thanks for that :good: ... Would you please be a bit more specific with the ROM Version / Kernel version / Android version ... Yep , I finally managed to try it out on my P601 and I'm facing the freezes ... It seems like some things need to be patched to be ready for the next release ... Thanks for the Notice the OP is going to get updated ... I'll release the P600 as soon as I fix the problems ... Sorry for the inconvenience ... I'll be back with a release ..
UPDATE : I finally managed to Fix the problem with kernel panics ... Would you please try out the FIXED Edition of V1B P600 ? ... LINKS ARE UPDATED !! ... waiting eagerly for the feedbacks :laugh:
With Best Wishes
Hitman1376
Fixed
hitman1376 said:
So , Finally I'm receiving Feedbacks thanks for that :good: ... Would you please be a bit more specific with the ROM Version / Kernel version / Android version ... Yep , I finally managed to try it out on my P601 and I'm facing the freezes ... It seems like some things need to be patched to be ready for the next release ... Thanks for the Notice the OP is going to get updated ... I'll release the P600 as soon as I fix the problems ... Sorry for the inconvenience ... I'll be back with a release ..
UPDATE : I finally managed to Fix the problem with kernel panics ... Would you please try out the FIXED Edition of V1B P600 ? ... LINKS ARE UPDATED !! ... waiting eagerly for the feedbacks :laugh:
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
I can confirm that the new version has indeed fixed the kernel panic I was previously experiencing. Thank's for the hard work, and I'll try to come back and report on my experience.
Does this kernel allow for any editing of settings and parameters like say the ElementX kernel on a nexus? If not is that a feature which can be added, or do the hardware/software limits of our Sammy device prevent that possibility?
Are this kernel permissive
Sent from my SM-G900F using XDA-Developers mobile app
Aerdowaith said:
I can confirm that the new version has indeed fixed the kernel panic I was previously experiencing. Thank's for the hard work, and I'll try to come back and report on my experience.
Does this kernel allow for any editing of settings and parameters like say the ElementX kernel on a nexus? If not is that a feature which can be added, or do the hardware/software limits of our Sammy device prevent that possibility?
Click to expand...
Click to collapse
Your Welcome ... I'm glad you liked it ... actually , I'm also working on it ... it's just like " Let's open and see " :laugh: ... I'm working on the next builds and I prefer reaching a stable status first ... then we can work on new features like " DoubleTap 2 Wake / Sleep " and " MultiROM " ( which is my own interest ... ) I'm currently learning how to handle such staff ( as I said I'm not that experienced ) and I'll try them out as I find some more spare time ... Thanks again for your Feedback :good: ...
gavilan2010 said:
Are this kernel permissive
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
Well , It's not a built-in feature but you can enable it this way :
1 - Be Rooted at the very first stage ( lots of guides for that ... also you shouldn't have problem because Sam's Root Restriction is gone !! )
2 - Install any Terminal app ( I have "Terminal Emulator " as a free example ... but your free in this ... )
3 - type the following commands ( just the ones on quotation marks !! ) :
a ) "su"
b ) "setenforce 0"
Then if you try the setting app , you can see it's telling you that it's permissive but please remember that in some cases and especial devices it reverts to Enforcing after reboot ( which seems a bit odd to me ) then you have 2 choices the first is to do this when ever you reboot ( actually if it reverted after rebooting !!! ) or you can use This App ( Please make a backup first so that you can revert if anything went wrong !! ... ) ... I hope it was helpful ...
With Best Wishes
Hitman1376
Prime Kernel V2 Released !!
Hi there guys , I finally managed to update and add some more features to the kernel so I decided to give you the Heads Up ... Check OP for a Specific Change log ... but for a quick look , we are going to have :
* Better CPU Freq Switching and Profiling ( MST and some others )
* Better Battery life ( due to APM and some others )
* X-Box GamePad support
* Smoother UI
* The V1B was not unstable but, this one is a bit better and more balanced
Thanks for your attention . I hope you like my work :laugh: Actually , I were going to update the Kernel a week later but , I were so happy because I have passed the University entrance Exam ... So I decided to share my happiness with you guys
With Best Wishes
Hitman1376
hitman1376 said:
Hi there guys , I finally managed to update and add some more features to the kernel so I decided to give you the Heads Up ... Check OP for a Specific Change log ... but for a quick look , we are going to have :
* Better CPU Freq Switching and Profiling ( MST and some others )
* Better Battery life ( due to APM and some others )
* X-Box GamePad support
* Smoother UI
* The V1B was not unstable but, this one is a bit better and more balanced
Thanks for your attention . I hope you like my work :laugh: Actually , I were going to update the Kernel a week later but , I were so happy because I have passed the University entrance Exam ... So I decided to share my happiness with you guys
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Appreciate that there is someone still developing on this awesome tablet, Thank you for your work and time :good::good:
£ui$ said:
Appreciate that there is someone still developing on this awesome tablet, Thank you for your work and time :good::good:
Click to expand...
Click to collapse
I'm Really glad you liked it ... I really appreciate your support ( Oh C'mon Supports are not always financial ... You gave me so much Energy :good: which is Great )
With Best Wishes
Hitman1376
TouchWiz/Lollipop/P600?
Which TouchWiz Lollipop ROM are people running on the P600??
calebcabob said:
Which TouchWiz Lollipop ROM are people running on the P600??
Click to expand...
Click to collapse
Unfortunately ,Your Question is not clear to me ... but if you mean the ROMs my kernel Supports , the answer is : No Matters which ROM ... it should be based on the Stock TW Lollipop ( all of them are ) ... actually CM and RR and EOS are not TW and also if you think you may face problems after flashing , make a backup of your " Boot " and "Cache " partitions in TWRP before flashing the kernel ...
With Best Wishes
Hitman1376
Hello Guys i am making a custom kernel for yu yunique/+
And i wont be able to test it Alone so i need testers For my kernel before relasing it for public ...... So do a favor to yu community join The Official Phantom Kernel Group for Yu Yunique
Link :-
https://telegram.me/joinchat/DPimPEB4B5AnfKTN-RVtDw
it says grp doesn't exist sir ji
Bro please update invitation link