Dear all,
Yesterday I installed Kingroot because I wanted to retrieve some photos using Diskdigger.
This morning I look at the phone and as I always see it turned on with 100% battery. After 10 minutes I'm going to take it and find it off.
No longer responds to any key:
..not go to download mode
.. if I connect it to the battery charger, no lights will turn on
.. I changed the battery .. no
I tried with the jiig..nothing
..collected to the pc..nothing, do not see it
So I thought (dahm to me!) that that program sent me the cell phone in hard brick..but it is a known program.
I have disassembled the cell and with the Flir thermal camera I saw that the eMCC tends to heat up to 33 ° C for about 3 seconds, then turn off the "core" ... and so cyclically, with only battery inserted, why not c It's way to turn it on. So it looks like there is still life.
This "blinking" of the eMMC lets me think I'm looking for a way to load the ROM
The Exynos processor stays stable at 33 ° C steadily ... so it seems to me all right
I can try to resuscitate it somehow.
I've read that you can create an SD card with a "bootloader" on board.
How can I do?
Thanks
impossibile creare un bootloader sulla micro sd card se è partita la memoria interna non puoi fare niente solo buttarlo
Related
I just bougth this unit, but when I try to upgraded the rom, (it had a 2002) then i put a 2003 everything goes fine until the moment when I have to do a hard reset, the unit turns off but does not turn on again, so I recharge the battery and try to turn it on again but nothing.
The only way to turn it on is plugg it to the recharger or the cradle then it turns on but if the stand by mode begins, then turns off again. Please help me, this is a gift for me and I don't wanna lose too fast.
did u push th second time on hard reset
thats what the instractions said.
El mismo problema
I used to have the same problem. What I've found is that the only rom version that works with my wallaby is the PPC 02, try that.
not again
I try putting the old rom, but the same thing happend. I changer the battery and it works fine for one day then the same thing.
Hello guys. Bought a 1050 mAh new battery designed for Qtek8500 (written on the battery). When connected to USB or a charger - no orange light, no charging. Synchronization with PC is OK, old original battery also OK. Tried Hard Reset - doesn't work, same cross on battery indicator appears.
Have everything original - WM5.0, 2Gb.
Could you please help me. Thanks in advance
I got a non-genuine battery off fleabay but it was slightly too small. Unless I wedge a bit of paper in the top it doesn't connect to the pins properly.
If it says 'designed for qtek 8500' on the battery it isn't genuine. It would say 'designed for Star100' if it were.
M.S
connection to the pins OK. On battery side it's written:
PALMEXX
Model: Qtek 8500/DPD S300
RatinG: 3.7VDC, 1050mAh
Any ideas why it doesn't work?
try this
can't remember if this works on all htc phones or just the ppc phones, but try it,
pull the battery and let set for about 10 seconds,
replace battery but do not power up the phone,
plug micro usb into phone but not into computer,
plug usb into computer and wait 10-30 seconds, (at this step you might see red/orange/green light come on)
power up device, (at this step you might see red/orange/green light come on)
if it is like other htc devices, it might begin to charge after a few seconds or a few minutes.
if not, nothing above will harm your phone so it won't hurt to try this method.
doesn't work (((
pepsodent said:
connection to the pins OK. On battery side it's written:
PALMEXX
Model: Qtek 8500/DPD S300
RatinG: 3.7VDC, 1050mAh
Any ideas why it doesn't work?
Click to expand...
Click to collapse
Got a multimeter? Any voltage accross the cell? Sounds duff to me. Try the method above - if the battery is completley flat sometimes it can't charge.
M.S
returned the battery to the seller. The whole batch didn't work with my device
i have the same problem. the new battery is little différent. in the left connector, they have a T in platic. te T plug in the phone but it's to little (maybe). I contact the seller and waiting...
Salut, j'ai ce problème. Je crois que ça vient du petit T en plastique sur le coté gauche. il et un peu différent. Sur l'écran du qtek, il m'indique une batterie avec une croix. en bougeant, la batterie se recharge un peu
je vais contacter le vendeur.
i have the same problem with batt PALMEXX on one device, but it work on other.what it mean?
Hey
Turned off my phone to switch sd cards from my 8 gb kingston to my new 32 gb samsung, but now I cant get the phone to turn on. It turns on the display and looks like it is trying to charge even if there is no cable connected. Furthermore it displays a warning I interpret as a overheating symbol for the battery. It a yellow triangle with a black exclamation mark inside and a temperature gauge next to it that reads 80 or so degrees.
I have tried with the old sd card, the new sd card, with charger cable, usb cable from computer. My 2000 mah battery and stock battery. It still wont turn on. Cant get it to download mode either.
Please help
Thanks in advance
Volume up, home button and power, see if you can get into recovery.
I managed to get into recovery and was able to reboot the phone from there. After it had finished it made the sound when connecting the charger alot. Even thogh no cable was connected to it. It has stopped though but i'm quite scarred of turning it of now.
It wont charge now. Doesn't register when the charger or usb cable is plugged in and everytime i turn the phone off and see the overheat symbol it drops a lot of battery power somehow. 25% i one drop and fra around 25 to 6 after that.
Remove your micro SD. Really. Retry just after you pulled it out.
Envoyé depuis mon Galaxy S II avec Tapatalk
No difference. My 2000 mah samsung battery went dead. Put in the original and it booted right away. Hooked it up to the charger and it began charging but only for like a minute then it stopped again.
Tried resetting the phone from recovery with no difference.
Any other advice or are we talking a new mainboard now?
My mate 10 came with empty battery, i pressed on power button, it didn't turn on.
I had to put it on charger and it gave me a red notification light. and i left it on charge. and after about an 40 mins or so, it gave me that is was 97% charged.. i left it till 100% and then it booted up, when i pressed the power button.
Should i be worried ? never had a phone that came with empty battery
mine did too, no problems
It depends i guess. Mine came at 34%.
same here
Mine was completely dead. After 2 minutes of charging it showed 1%.
moi aussi zéro de chez zéro
I had the exact same thing. And the box was opened so i didnt want to buy it at first it was suspicious. But it was the only one they had in the store and it was an emergency because my phone broke, so i bought it anyway. But now the battery seems to be fine
Does anyone know the solution for this problem? i am getting a notification saying my phone is either wet or has dirt even if it is dry or clean.
Spray out the charger port. Then try a different charger.. I had this issue, once..
SpookyBot03 said:
Does anyone know the solution for this problem? i am getting a notification saying my phone is either wet or has dirt even if it is dry or clean.
Click to expand...
Click to collapse
There are a few possibilities here. I know you say its dry but you need to be sure. It may look dry but still damp. Point a hairdryer at the port for 5 minutes. If it still states it then use a toothbrush or a toothpick to give it a little scrape around to see if there is any dirt in there. If its still showing then you should different chargers and cables. If its still showing then its a damaged USB port and a trip to Sammy is likely (unless you can open up phones yourself)
SpookyBot03 said:
Alguém sabe a solução para este problema? Estou recebendo uma notificação dizendo que meu telefone está molhado ou sujo, mesmo que esteja seco ou limpo.
Click to expand...
Click to collapse
Apps > show system apps > find ( usb settings) force stop and Clean cache and data.
Restart your phone and problem solved.
Works for me.
I have the same issue with this phone. Everytime it rains it tells me there's moisture detected in the USB. And won't let me charge my phone at all. So i just put the hair dryer for a bit and solves my issue.
My S9+ displays this dreaded error. It happens when i turn the ignition off in my vehicle. I need to unplug usb, reset error and plug it back in several times before it will accept charger. Truck needs to be running.
The port was filty i cleaned it with 99% alcohol and dried it very well. It is still doing this and every time i turn the ignition off.