I was flashing a ROM yesterday on my micromax a90s, while flashing the phone went off automatically. Now my phone isn't booting, neither normally and nor in recovery mode. The phone turns on shows SUperfone | Pixel logo and then reboots. This goes on and on and on.
Please help guys.
also Is there any way I can flash stock rom without going into recovery or turning the phone on?
1st of all Does your phone has a fastboot mode? if it does you gonna need the boot.img file of your rom. ( If you are using the stock rom the you need to extract the RUU of whatever rom file u are using and take out the boot.img file from it.)
Then you gotta take your phone to download mode or fastboot mode. if you can take it to the fastboot mode its very simple to solve this problem. If not you gonna need to search for the downloader programs like odin etc. to flash a boot file.
I assume that you got in to the fastboot mode and keeping up the reply.
You gonna need the Android SDK Tools to continue.
Extract the adb tool to a folder and go to that folder by using the CMD ( like c:\android or sth. else)
then you need to copy the boot.img file to the same folder. And write this command to the line while your phone is in fastboot mode.
fastboot flash boot boot.img
the it should say that the boot has been flashed succesfully.
Done your bootloop problem has been solved.
PS: If you are using a JellyBean rom dont flash anyother boot.img file use the JellyBean boot.img file for this operation.
MasterKoala said:
1st of all Does your phone has a fastboot mode? if it does you gonna need the boot.img file of your rom. ( If you are using the stock rom the you need to extract the RUU of whatever rom file u are using and take out the boot.img file from it.)
Then you gotta take your phone to download mode or fastboot mode. if you can take it to the fastboot mode its very simple to solve this problem. If not you gonna need to search for the downloader programs like odin etc. to flash a boot file.
I assume that you got in to the fastboot mode and keeping up the reply.
You gonna need the Android SDK Tools to continue.
Extract the adb tool to a folder and go to that folder by using the CMD ( like c:\android or sth. else)
then you need to copy the boot.img file to the same folder. And write this command to the line while your phone is in fastboot mode.
fastboot flash boot boot.img
the it should say that the boot has been flashed succesfully.
Done your bootloop problem has been solved.
PS: If you are using a JellyBean rom dont flash anyother boot.img file use the JellyBean boot.img file for this operation.
Click to expand...
Click to collapse
I can't get in fastboot mode
Can't you get in any mode like Vol- and power button or some combination like this?
Nope
MasterKoala said:
Can't you get in any mode like Vol- and power button or some combination like this?
Click to expand...
Click to collapse
BTW thanks guys
i sent my phone to service centre and they have fixed it for me!
I wanted to unlock my bootloader and install a custom rom but my windows won't recognise the fastboot mode so I started up with linux
I saw tutorials of recoveryX.exe and flashtool which only works for windows so I was searching for a manual way so that I could do it in the terminal ..
so I found some tutorial online which told me to flash some file something like
fastboot flash boot xyz.inf I don't remember the extension perfectly but it wasn't a zip or an img ..
and after that my phone turned off, I can still go for fastboot mode but I don't see anything on the screen please help me
I do not have windows so I cannot use flashtool or recoveryX.exe
awaisthebest said:
I wanted to unlock my bootloader and install a custom rom but my windows won't recognise the fastboot mode so I started up with linux
I saw tutorials of recoveryX.exe and flashtool which only works for windows so I was searching for a manual way so that I could do it in the terminal ..
so I found some tutorial online which told me to flash some file something like
fastboot flash boot xyz.inf I don't remember the extension perfectly but it wasn't a zip or an img ..
and after that my phone turned off, I can still go for fastboot mode but I don't see anything on the screen please help me
I do not have windows so I cannot use flashtool or recoveryX.exe
Click to expand...
Click to collapse
using flash tool flash the boot.img present in the rom zip
and install the rom
awaisthebest said:
I wanted to unlock my bootloader and install a custom rom but my windows won't recognise the fastboot mode so I started up with linux
I saw tutorials of recoveryX.exe and flashtool which only works for windows so I was searching for a manual way so that I could do it in the terminal ..
so I found some tutorial online which told me to flash some file something like
fastboot flash boot xyz.inf I don't remember the extension perfectly but it wasn't a zip or an img ..
and after that my phone turned off, I can still go for fastboot mode but I don't see anything on the screen please help me
I do not have windows so I cannot use flashtool or recoveryX.exe
Click to expand...
Click to collapse
Congrats for the brick.
Can you still get into fastboot/flash mode?
I've yet to hear about someone who used rexoveryx and it worked, forget all about it.
There is flashtool for linux, you can use it.
BTW, the only files you flash with fastboot, are with img, elf or sin extention.
ChikeD said:
Congrats for the brick.
Can you still get into fastboot/flash mode?
I've yet to hear about someone who used rexoveryx and it worked, forget all about it.
There is flashtool for linux, you can use it.
BTW, the only files you flash with fastboot, are with img, elf or sin extention.
Click to expand...
Click to collapse
yes yes I can still get into the fastboot and flash mode both!
and yes the file was elf format I remember now.
P.S : I'm downloading the flashtool for linux right now, I just hope it works, its of my friends' and I took it with a guarantee that I'll give you with a better firmware :/ He's been calling me since morning lol .. I'm doomed :/
guys? is there any hope?
bharathbondfire said:
using flash tool flash the boot.img present in the rom zip
and install the rom
Click to expand...
Click to collapse
Thank you for your reply
I'm downloading flast tool for linux right now and I'll then flash the boot.img present in the rom itself..
anything else that I can try if this doesn't work?
can anybody give me a link to CWM recovery's file and a way to flash it :/
P.P.S : I'm really really sorry for being sucha noob/dumbas* :/ but I just finished downloading flashtool and I cannot seem to install it I mean gosh! Linux is soo complicated.
I have downloaded a 7z file .. in which there's a file of tar extension which after I double click directs me to a folder named Flash Tools in which there are multiple forlder that include custom, deviced, drivers, firmwares etc
awaisthebest said:
Thank you for your reply
I'm downloading flast tool for linux right now and I'll then flash the boot.img present in the rom itself..
anything else that I can try if this doesn't work?
can anybody give me a link to CWM recovery's file and a way to flash it :/
if u have downloaded the flash tool copy boot.img to flash tool folder
enter fast boot press ok press on select a kernel to flash
and choose the kernel
and press enter.
Click to expand...
Click to collapse
bharathbondfire said:
awaisthebest said:
Thank you for your reply
I'm downloading flast tool for linux right now and I'll then flash the boot.img present in the rom itself..
anything else that I can try if this doesn't work?
can anybody give me a link to CWM recovery's file and a way to flash it :/
if u have downloaded the flash tool copy boot.img to flash tool folder
enter fast boot press ok press on select a kernel to flash
and choose the kernel
and press enter.
Click to expand...
Click to collapse
I have downloaded flash tool for linux but I cannot get it work .. I cannot get it to install or anything
isn't there a way to do all this manually through Terminal Fastboot commands?
That's the only thing that I can manage to work.
Edit : I have flashed the boot.img file from the downloaded ROM I did it this way (fastboot flash boot boot.img)
and now fortunately the phone starts and also now can be charged but the OS doesn't start .. I think this can be because I haven't flashed the OS but only the boot img?
what can I do now?
P.S : I cannot use the Flashtool or RecoveryX :/ so if there's a way to do it via fastboot or something it will really be appreciated
Click to expand...
Click to collapse
awaisthebest said:
bharathbondfire said:
I have downloaded flash tool for linux but I cannot get it work .. I cannot get it to install or anything
isn't there a way to do all this manually through Terminal Fastboot commands?
That's the only thing that I can manage to work.
Edit : I have flashed the boot.img file from the downloaded ROM I did it this way (fastboot flash boot boot.img)
and now fortunately the phone starts and also now can be charged but the OS doesn't start .. I think this can be because I haven't flashed the OS but only the boot img?
what can I do now?
P.S : I cannot use the Flashtool or RecoveryX :/ so if there's a way to do it via fastboot or something it will really be appreciated
Click to expand...
Click to collapse
if u have rom in the sd
flash boot.img and flash rom
remember to wipe full system
Click to expand...
Click to collapse
bharathbondfire said:
awaisthebest said:
if u have rom in the sd
flash boot.img and flash rom
remember to wipe full system
Click to expand...
Click to collapse
I finally flashed the CM9 4.0.4 rom thankyou for all of your help I appreciate everything
P.S : The led bottom light still doesn't work I don't know why, but the phone and the OS is working perfectly fine! Thank you again
Click to expand...
Click to collapse
New User who doesn't know how to root and bootunlock your yureka here is the guide,
http://www.thetechnotriad.com/326/how-to-root-yu-yureka/
GUIDE TO FLASH CM 14.1 VIA TWRP
I will tell you about the twrp method which i used to flash my rom.
After flashing twrp just download the rom given in the links below this thread and save it in sd card root folder,
Boot into recovery by pressing volume up and volume down and power key,
First of all backup your current SYSTEM DATA BOOT,
then go into wipe > advance wipe then select SYSTEM, DATA, DALVIK CACHE, CACHE,
and swipe to wipe.
Then go back to twrp home and select install and select the external sd and select the rom .zip file and swipe to flash it,
Same you have to do with gapps.zip file
Then just clear DALVIK CACHE
and reboot,
It will take up some time in cm logo then it will normally start
THIS METHOD WILL ERASE ALL APPS AND DATA BUT WILL NOT MESS UP WITH YOUR INTERNAL STORAGE OR EXTERNAL.
Download Links.
Link for Rom
https://docs.google.com/uc?confirm=u9h2&export=download&id=0B8Vodzmhc0GlY0R6UHh6UldzU00
https://forum.xda-developers.com/yureka/orig-development/rom-cyanogenmod-14-0-t3457546
Link for Gapp
http://opengapps.org/
GUIDE TO FLASH VOLTE ON YU YUREKA
Download the required files given below in the links
1.Extract both the zip folder and copy the NON-HLOS.bin file to ADB folder,
2.Reboot the phone to fastboot mode.
3.Open the ADB folder Press alt + shift + right click and click on open command window here.
5.Now type or copy paste this... Code:
( fastboot -i 0x1ebf flash modem NON-HLOS.bin )
Hit Enter.
This will flash the modem files.
When it says OK disconnect the phone and reboot.
Links for Volte Modem Files,
https://uplod.ws/hmr2cvk4xwao
https://uplod.ws/hmr2cvk4xwao
NOTE :- ALL THIS METHOD ARE NOT INVENTED BY ME I JUST TRIED IT AND WAS SUCCESSFUL BY LUCK
IF YOUR MOBILE IS BRICKED YOU ARE RESPONSIBLE FOR THAT JUST TRY NOT TO DO ANYTHING WRONG.
CREDITS :-
thetechnotriad for root guide
Men_in_black007 for the links
CM team
Geekysondh for the VOLTE files and guide.
I just gave a complete method to upgrade your OS to CM 14.1 and also flashing volte
I am also a new user here but know little bit about rooting n all
if u find it helpful that's enough for me
I am not at all good in providing guidance so if any errors mistake sorry for that
If any errors u face just leave a msg sure i will help u out as even i have face 100 of errors while trying this method coz of silly mistakes i did.
sk.shehbaz said:
New User who doesn't know how to root and bootunlock your yureka here is the guide,
http://www.thetechnotriad.com/326/how-to-root-yu-yureka/
GUIDE TO FLASH CM 14.1 VIA TWRP
I will tell you about the twrp method which i used to flash my rom.
After flashing twrp just download the rom given in the links below this thread and save it in sd card root folder,
Boot into recovery by pressing volume up and volume down and power key,
First of all backup your current SYSTEM DATA BOOT,
then go into wipe > advance wipe then select SYSTEM, DATA, DALVIK CACHE, CACHE,
and swipe to wipe.
Then go back to twrp home and select install and select the external sd and select the rom .zip file and swipe to flash it,
Same you have to do with gapps.zip file
Then just clear DALVIK CACHE
and reboot,
It will take up some time in cm logo then it will normally start
THIS METHOD WILL ERASE ALL APPS AND DATA BUT WILL NOT MESS UP WITH YOUR INTERNAL STORAGE OR EXTERNAL.
Download Links.
Link for Rom
https://docs.google.com/uc?confirm=u9h2&export=download&id=0B8Vodzmhc0GlY0R6UHh6UldzU00
https://forum.xda-developers.com/yureka/orig-development/rom-cyanogenmod-14-0-t3457546
Link for Gapp
http://opengapps.org/
GUIDE TO FLASH VOLTE ON YU YUREKA
Download the required files given below in the links
1.Extract both the zip folder and copy the NON-HLOS.bin file to ADB folder,
2.Reboot the phone to fastboot mode.
3.Open the ADB folder Press alt + shift + right click and click on open command window here.
5.Now type or copy paste this... Code:
( fastboot -i 0x1ebf flash modem NON-HLOS.bin )
Hit Enter.
This will flash the modem files.
When it says OK disconnect the phone and reboot.
Links for Volte Modem Files,
https://uplod.ws/hmr2cvk4xwao
https://uplod.ws/hmr2cvk4xwao
NOTE :- ALL THIS METHOD ARE NOT INVENTED BY ME I JUST TRIED IT AND WAS SUCCESSFUL BY LUCK
IF YOUR MOBILE IS BRICKED YOU ARE RESPONSIBLE FOR THAT JUST TRY NOT TO DO ANYTHING WRONG.
CREDITS :-
thetechnotriad for root guide
Men_in_black007 for the links
CM team
Geekysondh for the VOLTE files and guide.
I just gave a complete method to upgrade your OS to CM 14.1 and also flashing volte
I am also a new user here but know little bit about rooting n all
if u find it helpful that's enough for me
I am not at all good in providing guidance so if any errors mistake sorry for that
If any errors u face just leave a msg sure i will help u out as even i have face 100 of errors while trying this method coz of silly mistakes i did.
Click to expand...
Click to collapse
Thanks alot bro successfully updated to cm 14.1 and volte method working now i can call directly from phone app no need of jio4g voice app thanks alot
can someone guide me how to unlock bootloader on mac via terminal
i cant seem to unlock bootloader & thus everything else fails.
& now its stuck on bootlogo..
./fastboot-mac -i 0x1ebf devices (give me no response)
./fastboot-mac -i 0x1ebf oem unlock (says OKAY - but i dont think its unlocked)
Then i did :
Advanced reboot – turn it ON
Update Cyanogen recovery – turn it OFF
Android debugging – turn it ON
Now, turn off your phone.
then i did this :
./fastboot-mac -i 0x1ebf flash recovery yu-twrp-recoveryx64.img
after this i cannot boot into recovery. the bootlogo is stuck & if i press vol+ & vol- & power, it jusst keep rebooting.
now just stuck on YU bootlogo..
i can get into fastboot mode only & from fastboot, i can do this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
this brings me to cynogen recovery 6 & from there i did a wipe everything but no custom rom can be installed... all show errors, obviously, cause theres not root.
HELP !!
NOW, i'm stuck on boot logo..
cant do anything.
How should i revert back to everything stock & start all over again/
i have access to fast boot & 1 time boot recovery at a time
hypermaster said:
NOW, i'm stuck on boot logo..
cant do anything.
How should i revert back to everything stock & start all over again/
i have access to fast boot & 1 time boot recovery at a time
Click to expand...
Click to collapse
Kindly Share me your model no. And details of your mobile
sk.shehbaz said:
Kindly Share me your model no. And details of your mobile
Click to expand...
Click to collapse
YU YUREKA AO5510
Stuck on YU Boot Logo...
cant do anything, even if i 1 time boot to CM 6 & try to install the factory OS, it fails of shows aborted.
I Just want to go back to Stock & then try again clean.
& If i try to install official ROM after data wipe & system wipe, i get the below error :
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
& with cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
EOCD not found, not Zip
error: failed to access zipdata in 'Qu/?^?`??????z?????Y\f?f"??=????????6??o??????m`????Ќ
??????E??z???Q??ō?m??Óo??[?????iG????7C'H?纛E??zU?JϞ?'
i now have access to a windows 10 laptop also apart from a mac
I tried you steps but when I place call phone restarts and goes into bootloop
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
jatintomar said:
I tried you steps but when I place call phone restarts and goes into bootloop
Click to expand...
Click to collapse
Wipe the mobile completely then first install your OS then flash the VOLTE files and see there on fastboot if any error pops up and let me know when you are entering the commands to flash VOLTE what exactly is there on fastboot showing.
hypermaster said:
YU YUREKA AO5510
Stuck on YU Boot Logo...
cant do anything, even if i 1 time boot to CM 6 & try to install the factory OS, it fails of shows aborted.
I Just want to go back to Stock & then try again clean.
& If i try to install official ROM after data wipe & system wipe, i get the below error :
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
& with cm-11.0-XNPH05Q-tomato-signed-fastboot.zip
EOCD not found, not Zip
error: failed to access zipdata in 'Qu/?^?`??????z?????Y\f?f"??=????????6??o??????m`????Ќ
??????E??z???Q??ō?m??Óo??[?????iG????7C'H?纛E??zU?JϞ?'
i now have access to a windows 10 laptop also apart from a mac
Click to expand...
Click to collapse
Windows 10 okk install Pda drivers first of all then adb and fastboot and ill post u link to flash it via fastboot coz windows 10 doesn't support normal drivers and doesn't flash the device i have faced this issue on my laptop then i flash it from my p.c which is win 7 there it was successful and yeah install stock version of yureka ill share links for you okk
hypermaster said:
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=t5G42isjf68
Follow the tutorial and first uninstall each and every drivers from windows and then start the procedure again.
And quote me so I'll get a notification of your reply.
hypermaster said:
from fastboot on my mac i did this :
./fastboot-mac -i 0x1ebf boot recovery-yu.img
(Booted into CM 6 for this 1 time only)
Wiped everything
tried to install : QuarkOS™-v3.0-Stable_YUREKA.zip
Surprisingly, this installed & i did a REBOOT, but now again, its been stuck on YU Boot logo.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=t5G42isjf68
Follow this steps bro and yeah first uninstall each n every drivers from your windows then start the whole procedure again.
Update me soon will be waiting for your reply
sk.shehbaz said:
Windows 10 okk install Pda drivers first of all then adb and fastboot and ill post u link to flash it via fastboot coz windows 10 doesn't support normal drivers and doesn't flash the device i have faced this issue on my laptop then i flash it from my p.c which is win 7 there it was successful and yeah install stock version of yureka ill share links for you okk
Click to expand...
Click to collapse
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
hypermaster said:
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
Click to expand...
Click to collapse
Did you install the drivers first Coz Pda drivers are the only one which detects my yureka in fastboot mode on windows 10
hypermaster said:
Thanks a lot..
i downloaded & entered fastboot mode & did this :
factory-image-flash-tools-windows-flashtools
Flash-all.bat
This installed all boot.img, system, userdata,modem,bootloader, slb1, tz, aboot - All went well, then it said disconnect device & reboot.
Now, its not booting, no fastboot mode also, no recovery mode also.
now, its completely dead... nothings coming on now....
Just putting it for charging for awhile now, lets see if something comes up.
Just noticed. Device manager (windows 10) does not detect anything, when i connect USB to laptop.. only the red light shows now.
Click to expand...
Click to collapse
And yeah i have given you a link so you can follow the tutorial as per the video it will be better if you follow that.
sk.shehbaz said:
And yeah i have given you a link so you can follow the tutorial as per the video it will be better if you follow that.
Click to expand...
Click to collapse
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
---------- Post added at 10:55 AM ---------- Previous post was at 10:32 AM ----------
hypermaster said:
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
Click to expand...
Click to collapse
I THINK I HAVE HARD BRICKED MY YUREKA - Theres no Fastboot also.
Now, i need someone who can Unbrick a hardbricked yureka with emmc memory card system
Anyone in Mumbai who can do this for me ?
hypermaster said:
Thanks so much.
Yes i have pdanet installed.
in cmd prompt, it used to detect the devices also.
But now after flashing all orginal rom files, its now dead, i dont even have fastboot more now ?
Now, i cant even get into fastboot mode...
---------- Post added at 10:55 AM ---------- Previous post was at 10:32 AM ----------
I THINK I HAVE HARD BRICKED MY YUREKA - Theres no Fastboot also.
Now, i need someone who can Unbrick a hardbricked yureka with emmc memory card system
Anyone in Mumbai who can do this for me ?
Click to expand...
Click to collapse
Message me in PM bro we will sort it out bdw m also Mumbaikar
hello anyone i have problem with my phone sony xperia xz1 , after unlock bootloader my phone then i want rooting my phone , i search in google and found how to root xz1 with magisk This Link --> https://www.danusyakti.com/cara-root-sony-xperia-xz1/ its indonesian language you must translate it before,
after trying this tutorial is sucess but after i boot my phone it just boot in sony logo and this logo then its resarting again , and i try to charging my phone and battery percent not shown im so sad can anyone help me please:crying:
Ok calm down, take a deep breath ..as unlocked you boot loader I will take it you have a computer with the divers installed.. Sony USB and adb and fastboot drivers...
If so just use Xperia firm and download the latest firmware for your device and region.. put it on a folder and unzip it remove the ta. files and the persist.sin file do not take anything out of the folders ... Now get Newflasher (version 13 the one I prefer) you can find it here . . ( https://forum.xda-developers.com/cr...-newflasher-xperia-command-line-t3619426/amp/ ) take a minute to read over the op...
Once you flash you new firmware, just flash twrp ..
fastboot devices
fastboot flash recovery ( name of twrp your using).img , the easy way, rename your twrp image to twrp and put it in your adb/fastboot folder.. then in that folder bring up the command prompt and put your fastboot mode and flash twrp..
(fastboot flash recovery twrp.img )
Reboot your device .. then flash magisk and magisk manager and call it a day...
lilbrat said:
Ok calm down, take a deep breath ..as unlocked you boot loader I will take it you have a computer with the divers installed.. Sony USB and adb and fastboot drivers...
If so just use Xperia firm and download the latest firmware for your device and region.. put it on a folder and unzip it remove the ta. files and the persist.sin file do not take anything out of the folders ... Now get Newflasher (version 13 the one I prefer) you can find it here . . ( https://forum.xda-developers.com/cr...-newflasher-xperia-command-line-t3619426/amp/ ) take a minute to read over the op...
Once you flash you new firmware, just flash twrp ..
fastboot devices
fastboot flash recovery ( name of twrp your using).img , the easy way, rename your twrp image to twrp and put it in your adb/fastboot folder.. then in that folder bring up the command prompt and put your fastboot mode and flash twrp..
(fastboot flash recovery twrp.img )
Reboot your device .. then flash magisk and magisk manager and call it a day...
Click to expand...
Click to collapse
i download the firmware from xperiafirm my phone is xz1 701SO and then download is done but ftf file not showing can you tell me what i wrong ?
alviantoadi said:
i download the firmware from xperiafirm my phone is xz1 701SO and then download is done but ftf file not showing can you tell me what i wrong ?
Click to expand...
Click to collapse
When you download using Xperia firm alone it doesn't make an an ftf type file but a bunch of little files, thus the reason I said read up on how to use newflasher...
no you are misunderstanding, I mean the ftf file exists but is not detected in flashtool,when i using flashtool 9.18 file ftf is can be detect but when i flash it error says "this bundle is not valid"
lilbrat said:
When you download using Xperia firm alone it doesn't make an an ftf type file but a bunch of little files, thus the reason I said read up on how to use newflasher...
Click to expand...
Click to collapse
Can you give me tutorial step by step How to flashing xz1 701SO with flashtool please
lilbrat said:
Ok calm down, take a deep breath ..as unlocked you boot loader I will take it you have a computer with the divers installed.. Sony USB and adb and fastboot drivers...
If so just use Xperia firm and download the latest firmware for your device and region.. put it on a folder and unzip it remove the ta. files and the persist.sin file do not take anything out of the folders ... Now get Newflasher (version 13 the one I prefer) you can find it here . . ( https://forum.xda-developers.com/cr...-newflasher-xperia-command-line-t3619426/amp/ ) take a minute to read over the op...
Once you flash you new firmware, just flash twrp ..
fastboot devices
fastboot flash recovery ( name of twrp your using).img , the easy way, rename your twrp image to twrp and put it in your adb/fastboot folder.. then in that folder bring up the command prompt and put your fastboot mode and flash twrp..
(fastboot flash recovery twrp.img )
Reboot your device .. then flash magisk and magisk manager and call it a day...
Click to expand...
Click to collapse
Ok sir i Will use this tutorial but my Phone is not in debugging mode are Its work? Please reply
It's work for my xz1 thanks a lot for your help
The fastboot method for flashing ofox/twrp is not working but i was able to install PE recovery.
DarkMatrix204 said:
The fastboot method for flashing ofox/twrp is not working but i was able to install PE recovery.
Click to expand...
Click to collapse
1) flash any another rom which doesn't have recovery moved to vendor_boot then you can flash twrp/ofox but i'm not sure about that
2) flash miui through MiFlash and then boot into TWRP and flash it
i personally used the 2nd way
alonsoj636 said:
1) flash any another rom which doesn't have recovery moved to vendor_boot then you can flash twrp/ofox but i'm not sure about that
2) flash miui through MiFlash and then boot into TWRP and flash it
i personally used the 2nd way
Click to expand...
Click to collapse
Mi flash gives me an unhandled exception error when I select the firmware folder. I can press the continue button and my device is shown, but not sure if such a good idea to try flashing without resolving prior message??
Spaceboy60 said:
Mi flash gives me an unhandled exception error when I select the firmware folder. I can press the continue button and my device is shown, but not sure if such a good idea to try flashing without resolving prior message??
Click to expand...
Click to collapse
Use this MiFlash Tool... it always worked flawlessly for me everytime i need to go back to miui
Link : MiFlash Tool 2021.2.26
Also , make sure that you have drivers installed
Try to flash original vendor_boot. Extract it from latest fastboot rom
fastboot flash vendor_boot vendor_boot.img
Then try to boot twrp
fastboot boot twrp.img
If it boots go to advanced and select flash current twrp