Hi
Ive installed AOKP nightly but for some reason i cant seem to boot all the time and when i can, I'm getting loads of apps getting stopped, its not making any sense. ive tried various nightlies as well various GApps.
ive tried a clean install as well as format internal install too, both dont seem to work.
every damn app is stopping.
getting pretty fed up now
AOKP is not official, use official roms they boot fine & stable for daily use.
Related
I can't seem to find a stable release, yet a lot of youtube videos show people using it?
I've tried the nightly versions and for some reason it just hangs at the samsung load screen.
Anyone know what's happening with it? are we waiting on CM9+ICS instead of CM 7.1 now?
richfreestone said:
I can't seem to find a stable release, yet a lot of youtube videos show people using it?
I've tried the nightly versions and for some reason it just hangs at the samsung load screen.
Anyone know what's happening with it? are we waiting on CM9+ICS instead of CM 7.1 now?
Click to expand...
Click to collapse
I've installed a couple of the nightlies and not had major issues. There were indeed bugs, which made me move on to other ROMs (among other reasons, including the fact that my old HD2 had CM7 and it got a bit old).
As far as my experience goes, the nightlies have been quite stable. As mentioned, there were bugs here and there, and a force close from time to time. But I didn't have the problem you've mentioned with hanging at install.
They did take a while to load the first time, longer than I remember was the case on my HD2. Did you wait long enough? Delvic/cache cleared?
EDIT: I also found a CM9 around New Years, but it wasn't as stable and had charging issues. But I think it's out and the waiting's over, really.
EDIT AGAIN: The other option would be to try out the official ICS release, which can be found at samfirmware.com. That's my plan for the weekend.
like the previous...Sounds like your flashing over existing roms without wiping everything first...From recovery mode after backing up, the best way I find is to wipe data/clear cache and wipe dalvic cache from advanced menu before flashing any roms...that way your starting with a clean slate and will be less conflictions from old to new.
for me CM7.1 not stable
I'm waiting a stable CM9 its promising
If you follow the instructions on how to install it, it's stable for everyone. I'm using it for many many months now, and it's stable.
If you're coming from other ROM's, make sure you do a FULL wipe, and flash the rom TWICE in a row, without rebooting recovery.
And yes, we're waiting for CM9. CM7 is not supported anymore for SGSII.
I cleared the data, the cache, went into advanced and cleared the dalvik cache.
Installed the nightly, which I thought was trange was only 100mb, normally ROM's are like 300mb.
I'll try flashing the ROM twice as TheSaw has said. However, after seeing that CM7 isn't supported, I may think twice, i'm just getting bored of the stock.
Might also be worth noting, i'm using [email protected] #k2-18 kernel.
Also, by the way Sean is here, did you know you've got a USA flag in your mini profile under your username? will the official release be a odin flash? or can I just use a .zip through CWM to flash it? and would I still be able to use the speedmod kernel with ICS?
Always working for me and thousands of others .
Usual story is wrong install .
jje
I managed to get this working, by installing the ROM once, and then installing it again straight after.
I was just wondering, is there a way to move the lock screen lock down to the bottom of the screen, i.e. above the unlock and camera buttons? and is there a way to change the clock?
I have a Motorola Atrix on Bell (Canada), and for the past few months it's been running perfectly on a ICS version of Paranoid Android with no issues. I recieved a 32gb SD card for xmas, and I was reinstalling the ROM to move it to internal storage so that I can use my SD Card for music. I decided that since I was reinstalling the ROM I may as well get a new one, so I got the Paranoid Android JB ROM. I installed it to internal storage, with the tweaked body option, and it worked fine. Then I used the option chooser and installed some gapps like the play store, maps, youtube, as well as nova launcher and adobe flash, then rebooted. I first noticed that the wi-fi isn't working. It gets stuck at 'turning on wifi'. Also, none of the gapps were installed, just the launcher. The main issue, is that every couple minutes the phone will shut off. It also takes much longer than usual at the M screen (30-60 sec). It seems to turn off whenever I press the power button to wake it, whenever I plug in or unplug the device, and occasionally just randomly when the device is in use.
The phone is semi-operational right now besides having no Play store and the very frequent shut offs. Any help would be appreciated. I've tried a few different JB ROMs and they all have the shutting off issue, but Paranoid Android seems to be the only one with the Options chooser not working correctly.
Flashed back to the CM7 ROM Neutrino 2.9 . Works perfectly. Still though, is there any reason the JB Roms won't work for me? I know I've tried one in the past and it worked fine, but didn't want to keep is since is was still in Alpha at the time.
bjgrenke said:
Flashed back to the CM7 ROM Neutrino 2.9 . Works perfectly. Still though, is there any reason the JB Roms won't work for me? I know I've tried one in the past and it worked fine, but didn't want to keep is since is was still in Alpha at the time.
Click to expand...
Click to collapse
All ICS/JB ROMs are in early beta still. They're stable, just lacking hardware acceleration.
Did you do proper wipes and format /system partition before installing? Did you re-downloading the ROM and installing again? Did you try CM10 build from EPinter's? Sounds like your using Aroma installer, try flashing normal zip files for gapps, never had issues.
A lot of people are running CM10 as daily without issues, so retrace your steps to see if you overlooked anything.
エイトリックス から 送ります
Hi, I just recently came back to this forum, pleased to find that we now have CM10 working on Amaze ! (Thank you sportsstar!)
However I did have a couple issues when installing, and seeing as how a lot of people in the CM10 thread asked to redirect questions here, I figured I make a thread.
My problem is that it seems as though no matter what I install, there is always a problem. As far as I know, I am using the basic ICS-Ruby kernel that was dumped 6+ months ago. I installed the CM10 rom using 4EXT, with no issues.
However when I installed the Gapps (gapps-jb-20130301-signed) I constantly had the Android keyboard force close on me. So instead I tried to install the JB-4.2-Gapps-signed. With these, the Android keyboard would not force close but the Google Now search app would force close everytime.
I've also tried installing the DARK GLASS 0.6 ROM by jose, but then the wifi would not turn on. (When I would try to turn it on, it would just hang saying "Turning on Wifi").
It is probably worth mentioning that I did do a full wipe everytime I installed the CM10 rom. I was sure to be very thorough. When I installed DARK GLASS 0.6 ROM, again, I did a full format of partiitions, and a wipe. Still the issues above arise.
Can someone maybe help me out as to what I'm doing wrong? Thanks!
------------------------------------------------------------------------------------------------------------------------------------------------------
EDIT: I just looked at my phone info, and apparently the kernel I'm using is 3.0.53-gd28c6eb. Is this okay or do I need to flash a new kernel ?
I am currently running CM11 and dealing with a lot of the problems that cm10 had. So tried CM12. Basically dead in the water. Never got past registration.
Very sluggish and the keyboard keeps disappearing. The installation of CM11 went pretty smoothly following the install instructions. Not so with CM12.
Maybe there is something I am missing. The instructions say that repartitioning is not necessary !?!??!
Anyway followed the instructions to the letter. Got the suggested recovery and flashed it just like on cm11. The correct gapps to use is always a crap shoot so I tried several. I even installed without gapps still had problems.
So any help here would be appreciated.
thanks
I have been testing CM12 for a few weeks and have a few of the same problems. It seemed like at first it was pretty snappy, but now it's sluggish, keyboard disappears constantly, and my biggest pet peeve is that quite a few of my apps are now unavailable for this device. They worked before, so it's a bug in CM or one of the newer Android versions. I'm just going back to an older ROM for now.
Hi cosmic_kid
I'm asking these same questions in the cm12 QA and dev pages and not getting anywhere. They all tell me to go read some more or stop being rude !?!??!?!
I am currently running cm11 and only have the usual problems just like cm10 had. i.e. battery, black out, losing wallpaper.
So I thought cm12 should be a piece of cake !!! NOT SO !!
There must be something different with the install that is screwing something up.
I tried the recommended eng recovery and the latest TWRP and CWM. Same results. After gapps is installed things go to heck.
I did try running cm12 before installing gapps and it ran smooth. After gapps sluggish and never got past registration. Keyboard never came up !?!?!?
I don't know what to do so I will download the latest nightly and try again.
I Feel Your Pain!
Guys, I know exactly how you feel. I merged the partitions according to the other posts, formatted cache and userdata to f2fs and tried all the nightlies that came out, but keyboard problems, superuser problems and setup crashes just made it impossible to get anything going on my trusty 8gb Nook (BNTV250A). The closest I got to getting anywhere with CM 12 on it was when I updated the CM 12 March 26th nightly on CM 11-M12 and added pa_gapps-modular-nano-5.0.1-20150315-signed. Play store worked, I was able to get into developer options and enable root access and it looked hopeful, but alas it was so slow and lagging that I have given up for now. I used repart.img to go back to stock, (touch pad didn't work on stock since I had upgraded to 10 touch!) booted off SD and installed CMW recovery to restore my CM 11 -M12 configuration. I'm staying in touch through all the threads and hopefully we will one day have a smooth CM12 on our beloved Nooks!
CM12 is now working very smoothly on my 16gb nook. I didn't have to repartition anything. I just about got rid of my 16gb nook because it's older and slower than the newer 8gb nook. Glad I didn't.
So until there is a "how to" thread on how to get it to work on the 8gb nooks I will be using the older one.
The devs said that they didn't have a 8gb model to test their nightlys on. I'm wondering if they test them at all ???
What did you do to get it to run smoothly? I have the 16GB and it slows down all the time with CM12. I read gapps causes a lot of head-aches so I've been tempted to run without it and just side-load all my apps... :/
cosmic_kid said:
What did you do to get it to run smoothly? I have the 16GB and it slows down all the time with CM12. I read gapps causes a lot of head-aches so I've been tempted to run without it and just side-load all my apps... :/
Click to expand...
Click to collapse
pico gapps and Demetris' 16GB CM12 with the Tricker Mod stuff = faster than they day I bought it.
Now I just need 8GB working the same, since I have two of those!
I'm using a Galaxy S3 i9300 on a temporary basis and to get away from serious battery issues on the Stock ROM. I installed Resurrection Remix 5.7.6 (Android M). It works really smooth but I've had a recurring issues with the phone going into a bootloop while trying to reboot System UI until I use the stable backup I made in TWRP to recover it. I've noticed one thing where this issue occurs when I try to install an App from the Play Store, even though I installed a bunch of apps before this where it didn't bootloop, but every once in a while when I'm installing an app on the phone, after it downloads and starts to install, my phone UI crashes and goes into a bootloop. It's a very awkward issue and I'm new to Custom ROMs, can anybody figure out why this is?
Flash stock and start over. Dirty flashing breaks things.
pays
I definitely clean flashed the ROM and the Gapps, trust me on that. I also had another experience today; I installed an app and as soon as it installed the Theme Launcher, Trebuchet, and Play Services immediately crashed and I went into a System UI reboot. If I tried opening the app, I kept going into system UI reboots. Uninstalling this app and downloading the Lite version went just fine. I tried reflashing Gapps but it didn't change anything. Weird that it does it on this particular app, any ideas?
Try an older version of gapps