Guys .. the only thing holding me back from trying custom roms is... Errors.. i once tried to flash RR rom on my rn3.... Wifi wasnt working n Lost my mac address...
Flashed again... No signal was there....
Sometimes gps not working...
M a Noob... What should i do to avoid all these errors. N be like uh guys... Trying new roms n stuff
> Use the latest Recovery like Redwolf
> Flash appropriate firmware
> Flash ROM
> Flash Gapps
> Flash anything else you require like kernels, sound mods, camera mods etc ( optional step) That's it.
So currently I'm on ZCX twrp... Because i flashed the official one n didnt cook Boot.img...my phone didn't start...
So what do i do now... Is ZCX good enough ?
zcx is outdated use red wolf, everything else can be found here https://rn3customroms.weebly.com/
Related
Hello my name is John and thanks for looking in.
Ive tryed now about 8 times installing an this rom [ROM] [07.09.2012] MIUI 2.7.6 | CM9 & SEMC | Multi-Languages
and every time ive failed PLUS every time ive had to tft the mobile and install root over and over again + cwm
Now im so fu pissed of so im creating an thread help section for roms !
im the first one here asking for help so here i go.
Can some one give me a good tutorial on how to install roms ?
is it posseble to help me so i dont have to fail again !?
the last rom and my first to ive installed as i sayd 8 times and failed, what ive done then is this:
installed boot.img (kernal) then installed zip with cwm
last time i did it i installed zip then an patch zip and after that i flashed kernal but dident work either. PLZ help
One thing to remember is that a lot of people develop the roms on their own, for themselves, and losing your temper and swearing isn't exactly conducive to people helping you.
If you need to ask for help, perhaps cutting down the swearing and asking politely, even if you are frustrated, will help a lot.
There's a phrase that comes to mind... "You catch more flies with honey then vinegar".
There's no big science behind ROM flashing...
First thing, copy ROM zip file onto your SDcard.
If your bootloader is locked, make sure you have CWM recovery installed.
Start the phone. When you see the logo getting brighter, keep pressing volume DOWN until recovery menu appears.
If you have unlocked bootloader, flash a custom kernel. That way you have CWM.
Start your phone. The LED will change color to signal you to press volume DOWN in order to enter recovery.
Choose factory reset, wipe cache.
In some cases if the ROM won't boot you'll need to go advanced> select wipe dalvik.
After that choose install zip from sdcard and choose ROM zip.
That's it?
Make sure the your kernel is compatible with the ROM you're trying to flash.
For example cyanogenmod requires it's own kernel.
And make sure you're flashing a ROM that is actually intended for your device
Hi ! all ,
i just unlock bootloader offically. now i m confused between these two TWRP. i just want to flash cm based roms as well as revert back to miui roms without any problem. also want to backup my rom & flash through twrp if ever i stuck on boot logo. i mean i dont wanna use fastboot method to flash miui roms everytime . i jsut want to simply revert back to current rom or flash any rom through TWRP. so tell me which is best for me & give me instruction & file link also
Thanks in advance
COFFACE and Alka are really meant for MIUI but I think you can flash CM, never tried it though, I always use official TWRP. then again, I never backup ROMs. I use titanium backup.
zooreo said:
Hi ! all ,
i just unlock bootloader offically. now i m confused between these two TWRP. i just want to flash cm based roms as well as revert back to miui roms without any problem. also want to backup my rom & flash through twrp if ever i stuck on boot logo. i mean i dont wanna use fastboot method to flash miui roms everytime . i jsut want to simply revert back to current rom or flash any rom through TWRP. so tell me which is best for me & give me instruction & file link also
Thanks in advance
Click to expand...
Click to collapse
i use alka with resurrection remix rom. but i have to admit that i did backups but never tried to restore them because there are no guids how to do so on the redmi note 3 pro. because at some roms it seems you have to deselect system partition restore to get a working restore of a backup.
so ... flashing CM or resurrection remix is no problem with alka twrp ... restoring i never tried
I personally prefer Cofface patched by feds64 with which you don't have encryption related problems. I have upgraded and downgraded multiple times in MIUI (dev/stable/miui7/miui8/M/L) and other custom ROMs; and have even restored MIUI and other custom ROM's backup. No issue yet.
You can get it from HERE.
h0LLe said:
i use alka with resurrection remix rom. but i have to admit that i did backups but never tried to restore them because there are no guids how to do so on the redmi note 3 pro. because at some roms it seems you have to deselect system partition restore to get a working restore of a backup.
so ... flashing CM or resurrection remix is no problem with alka twrp ... restoring i never tried
Click to expand...
Click to collapse
Thanx brother
sasukay said:
I personally prefer Cofface patched by feds64 with which you don't have encryption related problems. I have upgraded and downgraded multiple times in MIUI (dev/stable/miui7/miui8/M/L) and other custom ROMs; and have even restored MIUI and other custom ROM's backup. No issue yet.
You can get it from HERE.
Click to expand...
Click to collapse
Thank you bro but i cant get it properly , i mean i m currently on official TWRP now what next? first to flash cofface recovery and then do mentioned ( link ) step?? or directly Go to this step without installing cofface first?? i m currently on miui 8 ( lollipop 5.1 ).
zooreo said:
Thank you bro but i cant get it properly , i mean i m currently on official TWRP now what next?
Click to expand...
Click to collapse
Bro just DOWNLOAD THIS ZIP, connect your phone with usb debugging on and run "Kenzo_MM_TWRP.bat" and follow the steps to flash twrp.
I accidentally wiped system and other partitions from my nx529j.
i was trying to flash stock rom but in stock recovery it says SD card not detected.
Even in TWRP i was unable to flash stock rom (Both 5.1.1 and 6.0.1). Custom ROM is installed but during calls neither me nor the other person can hear each others voice.
Internet is working fine.
Help.
I have the same problem. When I flashed RR or Mokee rom I was unable to hear call sound. I searched many forums but nothing helped. So i decided to flash stock rom bac, but it stuck on "Be yourself" or something like that. Now I am usim RR rom but without phone function which is very weird. Have anyone the same issue?
The same problem
Pauliesss said:
I have the same problem. When I flashed RR or Mokee rom I was unable to hear call sound. I searched many forums but nothing helped. So i decided to flash stock rom bac, but it stuck on "Be yourself" or something like that. Now I am usim RR rom but without phone function which is very weird. Have anyone the same issue?
Click to expand...
Click to collapse
I have similar problem. I have some Lineage 7.1 ROM and I want to flash back Stock ROM 6.0 beta, but I just try flash rom from official support page (.zip) and via TWRP and it show me ERROR I think, that maybe it isnt flashable file, but I dont know, how to change it to.
Please HELP US!!
I am facing a strange issue..I unlocked the bootloader the official way. Installed RR rom latest. Flashed Agni kernel. It was working fine.
After I switched off the device and turned on I noticed that touch is not working... System reboot to normal but touch is fully gone..
I had to flash fastboot rom edl mode to bring back the system to normal...
What might be the reason for loss of touch... Anyone please help....
Don't flash a different kernel, just try RR first, boot and make sure it works.
Once that is done, then you can try flashing the kernel and see if everything works. If it doesn't, you have your answer.
Most custom ROMs are also builded just for their kernel so if u flash custom kernel then there is chance that ROM will not work as u expected. Just think about it when you are installing a custom kernel.
Today I did flash lite mode rom . It boots up but touch was not working...nothing was flashed even gapps.
Sometimes the recovery twrp too does not work.,touch lost. Now i suspect something wrong with the hardware.
But no issues with miui roms...Thats what makes me wonder
did you do it on the computer?
sibikallikkat said:
I am facing a strange issue..I unlocked the bootloader the official way. Installed RR rom latest. Flashed Agni kernel. It was working fine.
After I switched off the device and turned on I noticed that touch is not working... System reboot to normal but touch is fully gone..
I had to flash fastboot rom edl mode to bring back the system to normal...
What might be the reason for loss of touch... Anyone please help....
Click to expand...
Click to collapse
You may want to try installing Radon Kernel. I've got an aftermarket display which also didn't work with a custom rom (Lineage OS), but after flashing Radon Kernel it worked flawlessly. You may want o try Radon 5.0 as I'm having trouble with 5.1.
Redminote 4 SD have gone to boot loop after a custom rom ,after that i used different methods like fastboot miui rom and .zip miui rom nothing seems to work can anybody have a solution?(device strats and after boot into mui for one min and restrats itself) most of the cutom roms has been used nothing have a soluition?
teja.asodi said:
Redminote 4 SD have gone to boot loop after a custom rom ,after that i used different methods like fastboot miui rom and .zip miui rom nothing seems to work can anybody have a solution?(device strats and after boot into mui for one min and restrats itself) most of the cutom roms has been used nothing have a soluition?
Click to expand...
Click to collapse
If you were able to boot into TWRP, reboot to recovery > wipe everything > flash this firmware : https://androidfilehost.com/?fid=889964283620754602, next flash any custom rom (download any rom from development section), flash Gapps > reboot! Lemme know how it goes. Good luck.
Not worked...problem remains same
Just download Lazy Flasher .Zip file. and install it via twrp after flashing custom rom .
Your problem will solve for sure.
same happens for me since yesterday. I was using a custom rom since some time and without changing anything after reboot I am running into the same trouble.
Have tried to reinstall official miui rom, lock bootloader etc.
I am afraid this might be a hardware failure.
Hi,
was able to fix my note 4. Have installed twrp 3.1.1-8.0 on my second note 4 and created a backup of all partitions to sd card. Then I have adjusted the serial number of the stored backup to match the one of the broken note 4. After restoring the whole device with the backup files from the working device the reboots are gone.
But it seems like now IMEI, MAC address and Bluetooth address are invalid and/or not correct. Was able to fix at least IMEI.
Have not identified any further issues so far.
BTW: from inside twrp recovery the phone never rebooted.
it seems to be a problem with firmware without firmware the device will boot fine but there wont be bt, fp , calling, sound, wifi etc.
but with firmware it will just bootloop.