LG V10 H901 with F600L Board:
I have been to" download mode" with F600L Qfil files, but LGUP or LG Bridge as seen H901 BK .I am trying to update with ; LGUP and LG Bridge is 100%, it is completed. But it does not update and my pc seen my phones turn again HS USB QLOADER 9008 .
Please help...
serdarkx said:
LG V10 H901 with F600L Board:
I have been to" download mode" with F600L Qfil files, but LGUP or LG Bridge as seen H901 BK .I am trying to update with ; LGUP and LG Bridge is 100%, it is completed. But it does not update and my pc seen my phones turn again HS USB QLOADER 9008 .
Please help...
Click to expand...
Click to collapse
can u give me the qfil file ?
Related
Hello everyone,
i read this thread http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 and try to unbrick my hardbricked D855. I recently installed Marshmallow 30c and then it bricked. As described in the guide i need the TOT File belonging to the used firmware. Is it possible to use the 30b files? Any other suggestion?
Best regards
Hi
Did you managed to unbrick your lg g3 ?
I am having the same problem
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 mode,
kindly help me if you can
I've sended to LG under warranty. I'm excited if they repair it.
If you have no warranty then follow the following, it's very good. Google for "open-freax.fr lg g3" and follow the guide.
I would love to figure out how we can find the file prog_emmc_firehose for our device cause if we do we will be able to unbrick the qualcomm 9008 mode.
MudaTrucka said:
I would love to figure out how we can find the file prog_emmc_firehose for our device cause if we do we will be able to unbrick the qualcomm 9008 mode.
Click to expand...
Click to collapse
i have the lg h960a and i flash a kdz model h960 and my v10 is in qualcoom 9008, this problem is the too or diferent?
Guys, so I updated my phone from H90120c to H90120L using LG Bridge. Now its hardbricked and when connecting to Windows, Windows says the device malfunctioned. The phone is not turning on at all. I cannot return it as I don't live in a T-Mobile country. I have to try to fix it myself.
Is there any solution?
Thank you!
Unbrick ME!. Feel free to ask questions in that thread, but it is very straight forward. Unless the phone us physically damaged, you can't brick an LG phone (hell probably not ANY Qualcomm based phone -- but LG for sure).
Same here. Phone dont enter download Mode. Pc recognize it as qualcomm hsusb 9008. Healp please. My mail [email protected]
ferchu91 said:
Same here. Phone dont enter download Mode. Pc recognize it as qualcomm hsusb 9008. Healp please. My mail [email protected]
Click to expand...
Click to collapse
if your phone motherboard is f600l (must dissemble phone) see here:
https://forum.xda-developers.com/tmobile-lg-v10/general/unbrick-h901-f600l-board-2017-t3635697
No... Its a h901.
ferchu91 said:
No... Its a h901.
Click to expand...
Click to collapse
if its bricked you have no choices . try with h901 kdz files
h901 lg v10 brick after lg bridge update
samy2015 said:
if its bricked you have no choices . try with h901 kdz files
Click to expand...
Click to collapse
i cant enter download mode or recovery. windows detected as qualcomm hsusb 9008 port 8
Hm, are you sure it wont enter download mode? Entering download mode on v10 might be a bit tricky sometimes. I had some bad experience myself last week. I thought my phone is hardbricked and i m done for good with it, but then i managed to get to download mode and fixed all.
ferchu91 said:
i cant enter download mode or recovery. windows detected as qualcomm hsusb 9008 port 8
Click to expand...
Click to collapse
yea try with qfil
ferchu91 said:
Same here. Phone dont enter download Mode. Pc recognize it as qualcomm hsusb 9008. Healp please. My mail [email protected]
Click to expand...
Click to collapse
Go through the debrick thread
It worked for me and many others
Sent from my LG V10 using XDA Labs
Hello everyone.
so, as the title says, I got this hard brick, I can't turn on the phone in any way (I don't even got a boot loop). it happened suddenly when I tried to turn the phone on, it had a stock rom (not the one that comes with the phone because it was corrupted by some kind of malware), the phone didn't turn on and the pc recognized it as QHUSB_Bulk, but after I installed the drivers the pc recognized it as Qualcomm HS-USB QDLoader 9008.
I tried with BoardDiag and QFIL but it doesn't worked. I just cant find the TOT file, I tried replacing files like partition.txt from other phones TOT files like the LG G2, but It doesn't works. with QFIL I tried but mixing D325 and D375 files (because I got the kdz and the dz from the D375 so I got some files to use), using the CMD I manage to make it finish the whole proces, but the phone is still bricked.
if anyone can help with the TOT file or another method that I didn't find it would be aprecciated.
i have lg v10 h901 tmobile with fl600 board. Today i flashed 6.0 firmware in it with lg up but i think it was corrupted because after completion phone turned off and when i plugged usb cable it showed qualcomm 9008 mode after that i converted kdz to dz and extracted dz with lg firmware extractor and downloaded it with the help of qfil in qualcom mode but after completion my phone didnt start and not showing any usb connection in pc but when i press power button it vibrates like its starting but nothing happens now i m confused how to delete that corrupted files from my phone bcz its not going to qualcom mode someone plz help.
farazkhan47302 said:
i have lg v10 h901 tmobile with fl600 board. Today i flashed 6.0 firmware in it with lg up but i think it was corrupted because after completion phone turned off and when i plugged usb cable it showed qualcomm 9008 mode after that i converted kdz to dz and extracted dz with lg firmware extractor and downloaded it with the help of qfil in qualcom mode but after completion my phone didnt start and not showing any usb connection in pc but when i press power button it vibrates like its starting but nothing happens now i m confused how to delete that corrupted files from my phone bcz its not going to qualcom mode someone plz help.
Click to expand...
Click to collapse
As far as I know, the extracted dz renders bin files for partitions. So how did u flash them using qfil/qpst? Doesn't qfil require mbn and XML files instead?