Hi every body. First i am trying to fixing capacitive buttons i bricked my AL10..then i purchese dc phonix and rescue but when i flash bord firmeare with nouga gives error then flash oreo and now THERE İS NOTİNG WHEN CONNECT TO THE COMPUTER.MY PHONE FULLY DİED. İS THERE ANYBODY KNOWS WHERE İS THE TEST POİNT FOR 9008 PORT... THANKS MUCH...SORRYVFOR BAD ENGLİSH
I have the same problem... It's now the third thread about a dead H9... Anybody know where is test Point?
same problem.
[email protected] said:
Hi every body. First i am trying to fixing capacitive buttons i bricked my AL10..then i purchese dc phonix and rescue but when i flash bord firmeare with nouga gives error then flash oreo and now THERE İS NOTİNG WHEN CONNECT TO THE COMPUTER.MY PHONE FULLY DİED. İS THERE ANYBODY KNOWS WHERE İS THE TEST POİNT FOR 9008 PORT... THANKS MUCH...SORRYVFOR BAD ENGLİSH
Click to expand...
Click to collapse
and also @4r44444
Did you solved your problem? Did you found the test point?
jacquesallet said:
and also @4r44444
Did you solved your problem? Did you found the test point?
Click to expand...
Click to collapse
Sent from my Honor 9 using XDA Labs
Sent from my Honor 9 using XDA Labs
OMG Thank you!!
But are you sure? Did you tried? Did it connected your phone to the computer?
what is a test point?
Anybody can describe how I can reactivate my Dead Honor with this Testpoint?
I connected the 2 Tespoints with a metal. Now the smartphone established connection it is shown as "USB SER" in Device Manager. wat do now?
---------- Post added at 17:24 ---------- Previous post was at 16:30 ----------
Finished to install right driver " ASC-Driver_Handset WinDriver 2.01.00.00" (Findable in google)
Smartphone is now recognized as "huawei usb com 1.0" (COM7)
- I think now I need a testpoint firmware since it isn't recognized in DC-Phoenix and none findable.
Any ideas?
Phone revived see my thread: https://forum.xda-developers.com/honor-9/how-to/revive-dead-honor-9-hardbrick-connect-t3846500
Related
Asus Memo Pad ME172V 7" not working
its hang and show "no usb cable connected!"
can anyone help me.
Hello
help me please :crying:
Have you tried to reset your unit. There is a reset hole there. Try it may help.
armic said:
Have you tried to reset your unit. There is a reset hole there. Try it may help.
Click to expand...
Click to collapse
I tried that before.
Still same.
Thanks for reply.
a__321 said:
Asus Memo Pad ME172V 7" not working
its hang and show "no usb cable connected!"
can anyone help me.
Click to expand...
Click to collapse
did u try to "root" it?! same problems.........
me too.
how to hard reset ME172V this model ?
anyone can help ?
a__321 said:
Asus Memo Pad ME172V 7" not working
its hang and show "no usb cable connected!"
can anyone help me.
Click to expand...
Click to collapse
faredqaz said:
did u try to "root" it?! same problems.........
Click to expand...
Click to collapse
You hard bricked it. For now the only way is to send it to a service center. Say that you were playing a game and that it suddenly turned off. When you turned back on it showed this. They will accept a warranty card if you do this, and they will probably just give you a new one right away.
---------- Post added at 09:25 PM ---------- Previous post was at 09:23 PM ----------
alex1118 said:
me too.
how to hard reset ME172V this model ?
anyone can help ?
Click to expand...
Click to collapse
Look at the hard reset guide here (under the other section) https://www.asus.com/Tablets_Mobile/ASUS_MeMO_Pad/#support_Download_32 , however, when I tested the method it didn't work for me. You should try it out yourself.
me172V No USB Cable Connected
Does anyone know if there are other places you can take your tablet to get repaired other that sending it to ASUS? Because I too have the same problem, and nothing has worked for me either. Just wondering what they do at ASUS that someone else can't do also.
Droidman61 said:
Does anyone know if there are other places you can take your tablet to get repaired other that sending it to ASUS? Because I too have the same problem, and nothing has worked for me either. Just wondering what they do at ASUS that someone else can't do also.
Click to expand...
Click to collapse
Well they have download tools which they use in combination with Download mode. With them they flash stock images and they revive the tablet with it. And as far as I know, only ASUS has them. I did contact them, asking for the tools, but they are yet to respond.
Sent from my ME172V using XDA Premium HD app
DroidMan, ever get a resolution to this? I've got a tablet in the same condition with no way to fix it.
Kage_ said:
DroidMan, ever get a resolution to this? I've got a tablet in the same condition with no way to fix it.
Click to expand...
Click to collapse
You could try restoring a system dump.
Sent from my ME172V using XDA Premium HD app
I have same issue while I trying to install other ROM image
My Asus memopad (me17v) is not working, I think it is flashed with wrong ROM image. I have the source code for the the link mentioned about. Is there any way to install Android on my tablet? I have tried the clear data for the assuse webste, but it is showing the boot option but it is not fixing the issue..... Please help me
(I think I have to install the BOOT image and Android on my tablet)
Mr.Kuttappan said:
My Asus memopad (me17v) is not working, I think it is flashed with wrong ROM image. I have the source code for the the link mentioned about. Is there any way to install Android on my tablet? I have tried the clear data for the assuse webste, but it is showing the boot option but it is not fixing the issue..... Please help me
(I think I have to install the BOOT image and Android on my tablet)
Click to expand...
Click to collapse
Try flashing a system dump. You can find everything you need here
http://forum.xda-developers.com/showthread.php?t=2216390
Sent from my Nexus 4 using XDA Premium 4 mobile app
Hi there.
Recently I got a Motorola E XT-1021 with Kitkat4.4.4, and unfortunately the Wi-fi wasn´t working, when I put it on, it auto-deactivates.
I´ve been searching for hours, and a solution was to put the file WCNSS_qcom_wlan_factory_vn on the persist folder, but it didn´t worked for me.
I´ve already rooted and rebooted, and fabric reseted... but nothing...
PS: Before I obtained the cellphone It was from a friend of mine, and It was working well, but after I reseted it, the wifi stopped working
PS2: Sorry If my english is bad, It isnt my native language.
Light_Aeon said:
Hi there.
Recently I got a Motorola E XT-1021 with Kitkat4.4.4, and unfortunately the Wi-fi wasn´t working, when I put it on, it auto-deactivates.
I´ve been searching for hours, and a solution was to put the file WCNSS_qcom_wlan_factory_vn on the persist folder, but it didn´t worked for me.
I´ve already rooted and rebooted, and fabric reseted... but nothing...
PS: Before I obtained the cellphone It was from a friend of mine, and It was working well, but after I reseted it, the wifi stopped working
PS2: Sorry If my english is bad, It isnt my native language.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showpost.php?p=68034723&postcount=397
OR
http://forums.androidcentral.com/go...-wifi-won-t-turn-mac-address-unavailable.html
Try solution by Huong Cao
Did it
ABSathe said:
Try this
http://forum.xda-developers.com/showpost.php?p=68034723&postcount=397
OR
http://forums.androidcentral.com/go...-wifi-won-t-turn-mac-address-unavailable.html
Try solution by Huong Cao
Click to expand...
Click to collapse
I´ve already tried this, and it did not work :/
Thank you, another idea?
Light_Aeon said:
I´ve already tried this, and it did not work :/
Thank you, another idea?
Click to expand...
Click to collapse
Just a guess .. but have you tried any lollipop rom to see if the issue still persists ?
Sent from my Nexus 5X using XDA Labs
Yep, I tried but still not working
ABSathe said:
Just a guess .. but have you tried any lollipop rom to see if the issue still persists ?
Sent from my Nexus 5X using XDA Labs
Click to expand...
Click to collapse
Well, yes, I´m currently using Latin American Lollipop 5.1 from this thread
HTML:
http://forum.xda-developers.com/showthread.php?t=2755857
but still not working.
I found that there is no MAC address inmy Wi-fi nor Bluetooth.
So I´ve read that it could be something about the IMEI, because we factory reseted the cellphone and instead of putting my friend´s SIM, I inserted mine.
That´s possible? And if so, do you know if I could fix this? Thank you again.
Light_Aeon said:
Well, yes, I�´m currently using Latin American Lollipop 5.1 from this thread http://forum.xda-developers.com/showthread.php?t=2755857
but still not working.
I found that there is no MAC address inmy Wi-fi nor Bluetooth.
So I�´ve read that it could be something about the IMEI, because we factory reseted the cellphone and instead of putting my friend�´s SIM, I inserted mine.
That�´s possible? And if so, do you know if I could fix this? Thank you again.
Click to expand...
Click to collapse
For no Mac address issue
Please refer the second solution I gave you in my above post (The one by Huong Cao)
And for that IMEI issue .. try flashing radio files
(Please ignore grammatical mistakes if any)
Sent from my Nexus 5X using XDA Labs
I´ll try
ABSathe said:
For no Mac address issue
Please refer the second solution I gave you in my above post (The one by Huong Cao)
And for that IMEI issue .. try flashing radio files
(Please ignore grammatical mistakes if any)
Sent from my Nexus 5X using XDA Labs
Click to expand...
Click to collapse
Thank you, I will try flashing radio.
But how does that works? What it will change?
Light_Aeon said:
Thank you, I will try flashing radio.
But how does that works? What it will change?
Click to expand...
Click to collapse
Flashing radio may help with IMEI issue and it will update your modems to latest version
Sent from my Nexus 5X using XDA Labs
Losing Hope
ABSathe said:
Flashing radio may help with IMEI issue and it will update your modems to latest version
Sent from my Nexus 5X using XDA Labs
Click to expand...
Click to collapse
Hi again, I tried flashing radio, from this
HTML:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
but apparently it did not work...
I did the Huang method too, but I couldn´t see any changes...
I´m starting to lose my hope
What should I do next?
Install a Custom Lollipop ROM?
Light_Aeon said:
Hi again, I tried flashing radio, from this http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
but apparently it did not work...
I did the Huang method too, but I couldn´t see any changes...
I´m starting to lose my hope
What should I do next?
Install a Custom Lollipop ROM?
Click to expand...
Click to collapse
First of all don't lose hope
Now see if your imei issue is solved
If yes take a backup of efs partition and keep it safe
Now install cm12.1 build by clean installing
And see if it helps
Sent from my Nexus 5X using XDA Labs
ABSathe said:
First of all don't lose hope
Now see if your imei issue is solved
If yes take a backup of efs partition and keep it safe
Now install cm12.1 build by clean installing
And see if it helps
Sent from my Nexus 5X using XDA Labs
Click to expand...
Click to collapse
I installed CM12.1 and the issue wasn´t solved... Neither wi-fi or bluetooth.
So I tried CM13, and same.
Any idea? :,0
Sorry If I hadn´t replied before, I was busy with the school
Do you have working sim ? I mean is imei number in place ?
If yes .. backup your efs partition through twrp first and then flash stock 5.1 rom
That's the only thing I can suggest now
MOTO E XT-1022 with same problem.
No WIFI working nor WiFi hotspot.
flashed different roms even stock rom too... and tried different kernels too..
even changed wpa folder in root
still no solution please help!
---------- Post added at 07:29 PM ---------- Previous post was at 07:28 PM ----------
ABSathe said:
Do you have working sim ? I mean is imei number in place ?
If yes .. backup your efs partition through twrp first and then flash stock 5.1 rom
That's the only thing I can suggest now
Click to expand...
Click to collapse
Sim cards was not working few days back but when i flashed radio files the problem was solved... new the wifi problem popped up "/
KhanStan said:
MOTO E XT-1022 with same problem.
No WIFI working nor WiFi hotspot.
flashed different roms even stock rom too... and tried different kernels too..
even changed wpa folder in root
still no solution please help!
---------- Post added at 07:29 PM ---------- Previous post was at 07:28 PM ----------
Sim cards was not working few days back but when i flashed radio files the problem was solved... new the wifi problem popped up "/
Click to expand...
Click to collapse
What's your Mac address .. can you see it ?if it is 02:00:00:00 it's a problem
Send your Mac address through PM
ABSathe said:
What's your Mac address .. can you see it ?if it is 02:00:00:00 it's a problem
Send your Mac address through PM
Click to expand...
Click to collapse
yes my MAC address is shown as : 02:00:00:00
how to solve it ?
http://forums.androidcentral.com/go...-wifi-won-t-turn-mac-address-unavailable.html
Try solution by Huong Cao
Works good for me
Hit thanks if this helps :good:
finally this helped me...
a very big thanks to @abhi5974
http://forum.xda-developers.com/moto-e/general/fix-mac-0200000000wifi-hotspot-t3454211
is there a way to downgrade Mi Box 3 MDZ-16-AB from oreo to MM
Same question, right now the bugs are horrible
Same here.. And a way to root..
same here
Oreo is worst update on mi box 3
still no answer to this problem? no way to downgrade from oreo?
same here please help
str8ridah said:
is there a way to downgrade Mi Box 3 MDZ-16-AB from oreo to MM
Click to expand...
Click to collapse
PM me, i have a method that just may work
Please post the method here
My Mi Box is unusable after the update. If anyone has a way to revert to the previous firmware please post. Thanks in advance.
i hope that time will come that there will be a solution for this..
Ricky Divjakovski said:
PM me, i have a method that just may work
Click to expand...
Click to collapse
I've tried to burn ATVX v2F img using the burning tool for the 19-AA mibox(on Oreo), but failled showing this:
Code:
[16:23:32 252][HUB2-4][Err]--[0x10103005]Romcode/Initialize DDR/Download buffer/Read item data failed
any way to proceed please?
lonnieo said:
i've tried to burn atvx v2f img using the burning tool for the 19-aa mibox(on oreo), but failled showing this:
Code:
[16:23:32 252][hub2-4][err]--[0x10103005]romcode/initialize ddr/download buffer/read item data failed
any way to proceed please?
Click to expand...
Click to collapse
tl;dr
no
Hey ppl! Ever since the September security patch ota update, I'm unable to access the phone info menu via dialer. Has anyone else been facing the same issue? Please help me fix it, this is the only way I can force 4g only to get uninterrupted connectivity.
I am too unable to do so brother. Have you found any solution ?
Priyanshu02 said:
I am too unable to do so brother. Have you found any solution ?
Click to expand...
Click to collapse
No man Im waiting to build my PC and then change the time on this thing.
Priyanshu02 said:
I am too unable to do so brother. Have you found any solution ?
Click to expand...
Click to collapse
No man, I'm waiting to finish building my PC so I can flash a different rom. Coloros sucks anyway
SaraKumar said:
No man, I'm waiting to finish building my PC so I can flash a different rom. Coloros sucks anyway
Click to expand...
Click to collapse
Yeah! ColourOS sucks in real. Now, it had made everthing miserable over this device. I will too unlock my bootloader and have a good custom ROM. But the development for this phone is not upto mark
I am also not able to use this code after new a.19 update. Now i am using MTK engineer aap available in playstore. Only phone info access able through this app. Which is enough for me.
---------- Post added at 04:47 PM ---------- Previous post was at 04:44 PM ----------
SaraKumar said:
Hey ppl! Ever since the September security patch ota update, I'm unable to access the phone info menu via dialer. Has anyone else been facing the same issue? Please help me fix it, this is the only way I can force 4g only to get uninterrupted connectivity.
Click to expand...
Click to collapse
MTK engineer app workfine try it now bro i am using it daily.
Thank you so much bro! Mtk didn't work, but similar app called network mode worked.
SaraKumar said:
Thank you so much bro! Mtk didn't work, but similar app called network mode worked.
Click to expand...
Click to collapse
Mtk work in my mobile.
Yes this app much better than mtk.
How access phone information in realme 5 pro
Hie everyone am stuck flashing Infinix note 7 x690B. The device went into boot loop after attempting to flash magisk patched boot to acquire root access in the device via adb and fastboot tools. I tried to flash the device with Tecno tool and sp flash tool all demanding for the right da file to complete flashing process. Anyone with a solution on this kindly assist.
Did you solve the issue?
Did you solve the issue or not.. If not than tell me the whole story maybe i can help you out
I also have the same issue
i also got into same problem. Help plz
ahmad0058 said:
i also got into same problem. Help plz
Click to expand...
Click to collapse
Hey i think i can help you out. Tell me exactly what happened
mehdi.shah said:
Hey i think i can help you out. Tell me exactly what happened
Click to expand...
Click to collapse
I tried to root infinix note 7 with magisk . I unlocked bootloader. That was successful. Then i flashed magisk patched boot.img file . After that mobile got into bootloop. Unable to boot now in fastboot mode also. And when try to flash with sp flash tool. It immediately gets disconnected.
Bro you did wrong thing new new phones you have to disable dm verification after flashing a patched boot file in order to bootup mobile successfully. Anyways are you flashing same build as your phone was running on.. Or is it the different build?
Sent from my JKM-LX1 using Tapatalk
muntazir.mehdi said:
Bro you did wrong thing new new phones you have to disable dm verification after flashing a patched boot file in order to bootup mobile successfully. Anyways are you flashing same build as your phone was running on.. Or is it the different build?
Sent from my JKM-LX1 using Tapatalk
Click to expand...
Click to collapse
it is different. And sp flash tool also gives the error of DA file not ok. Demands DA file for infinix note 7.
Did you try to flash with after sales service tool?
Sent from my JKM-LX1 using Tapatalk
---------- Post added at 07:10 AM ---------- Previous post was at 07:06 AM ----------
ahmad0058 said:
it is different. And sp flash tool also gives the error of DA file not ok. Demands DA file for infinix note 7.
Click to expand...
Click to collapse
If you have whatsapp or something where i can talk you in real time than come there i will try to provide you assistance and the files you need
Sent from my JKM-LX1 using Tapatalk
muntazir.mehdi said:
did you try to flash with after sales service tool?
Sent from my jkm-lx1 using tapatalk
---------- post added at 07:10 am ---------- previous post was at 07:06 am ----------
if you have whatsapp or something where i can talk you in real time than come there i will try to provide you assistance and the files you need
sent from my jkm-lx1 using tapatalk
Click to expand...
Click to collapse
03116092111
---------- Post added at 08:04 AM ---------- Previous post was at 07:24 AM ----------
i found a fix https://www.martview-forum.com/threads/infinix-note-7-x690b-orange-state-auto-restart-problem-fix-cm2mt2.32584/. Sorry for other forum link
Did
mehdi.shah said:
Did you solve the issue?
Did you solve the issue or not.. If not than tell me the whole story maybe i can help you out
Click to expand...
Click to collapse
Didn't solve the issue yet. Here is my watsapp number if you can assist ±254705980548
mehdi.shah said:
Did you solve the issue?
Did you solve the issue or not.. If not than tell me the whole story maybe i can help you out
Click to expand...
Click to collapse
Cm2 dongle seems to do the trick but unfortunately i don't have the dongle neither do any of my friends have it. If i could get anyone with cm2 dongle and remote it to me well and good. Here is my watsapp no +254705980548
mehdi.shah said:
Did you solve the issue?
Did you solve the issue or not.. If not than tell me the whole story maybe i can help you out
Click to expand...
Click to collapse
Finally *YES* a guy from Syria assisted me. Remoted infinity Cm2 using and by using flexihub usb share completed the long crisis that put my new device lying in the box for 3mnths. God bless Syria.
Chovu said:
Finally *YES* a guy from Syria assisted me. Remoted infinity Cm2 using and by using flexihub usb share completed the long crisis that put my new device lying in the box for 3mnths. God bless Syria.
Click to expand...
Click to collapse
can you give me his contact details.MY note 7 also same issue. pls help
1MrASL said:
can you give me his contact details.MY note 7 also same issue. pls help
Click to expand...
Click to collapse
Whats the problem with your device is it having a boot loop? And do you have infinity cm2 dongle?
Chovu said:
Whats the problem with your device is it having a boot loop? And do you have infinity cm2 dongle?
Click to expand...
Click to collapse
This place is so public to publish someone's contacts without proper permission. My bro or sister i gave my watsapp no reach me through that number for assistance.
Chovu said:
This place is so public to publish someone's contacts without proper permission. My bro or sister i gave my watsapp no reach me through that number for assistance.
Click to expand...
Click to collapse
ok bro my phone same problem as yours also no dongle with me. [email protected] its my email. can you give whatsapp number
Ok
1MrASL said:
ok bro my phone same problem as yours also no dongle with me. [email protected] its my email. can you give whatsapp number
Click to expand...
Click to collapse
Chovu said:
Ok
Click to expand...
Click to collapse
Am glad you also got assisted... Thanx
Hi,
Please help me too.
I unlocked my bootloader and flashed patch boot img file.
Phone starts but wifi is not working. Also bluetooth keeps force closing.
I do not have cm2 dongle, so if anyone can help me, that would be great.
Chovu said:
Am glad you also got assisted... Thanx
Click to expand...
Click to collapse
Hey can you also share his details on my email?
Thanks a lot.