it still boots but i can't install another stock rom because build prop has damaged. but it still boots.
can someone please upload mate 10 build prop? so i can flash correct stock rom cuz when i try to flash another stock rom it says not supported device it doesnt recognizes as mate 10 so..
i need this two files.
system/build.prop
and
vendor/build.prop
Here you go: https://mega.nz/#!0TxWkbZA!0THdh4udaQpSRpV6oI65OhS9_OcFoqq_YfHtQYr2qHM
Bordo_Bereli51 said:
can you say which model? ALP-L09 or L29
Click to expand...
Click to collapse
It doesn't matter. Nothing in build.prop refers to L09 or L29, or ALP for that matter.
I think that's defined in some other prop file, probably in cust or product.
can you say which model? ALP-L09 or L29
ante0 said:
Here you go: https://mega.nz/#!0TxWkbZA!0THdh4udaQpSRpV6oI65OhS9_OcFoqq_YfHtQYr2qHM
Thank you sir, i tried but didnt worked as i expected:/
Click to expand...
Click to collapse
Mate 10 alp-l29 bricked . Help please
Bricked my huawei mate 10. Help me please.
Related
How to Change Region of my huawei honor 5x root kiw-l21c185b140 to kiw-l22/l24????
please help me
thank you
:crying::crying::crying::crying:
mammadpsy said:
How to Change Region of my huawei honor 5x root kiw-l21c185b140 to kiw-l22/l24????
please help me
thank you
:crying::crying::crying::crying:
Click to expand...
Click to collapse
I dont think that can be done because of the different bands that are used.
The number on the back is the one you get. Its hardware related so it has to be done by someone with allot of skill and than it is still the question if it will work.
I think you can't
mammadpsy said:
How to Change Region of my huawei honor 5x root kiw-l21c185b140 to kiw-l22/l24????
please help me
thank you
:crying::crying::crying::crying:
Click to expand...
Click to collapse
All honor 5x variants have same hardware .
U need to flash the modem files in order to change region .
After flashing rom , flash cust.img , system.img and boot.img of the same region variant .
( I have my moto G and I did the same on it to change to GPe and even to US and other variants ) .
Give a try if u are skilled and make enough research first .
Was this successful ? Any update ?
I'm planning to flash my KIW-L23 to KIW-L24 as all bands in it were supported by KIW-L24.
No firmware is available to KIW-L23. So I need to change.
i've got a honor 5x KIW-TH00L and current reside in Nigeria where network carriers operate at B1(2100) UMTS but it ain't support on my device. what can i do to enable or add a frequency band ?
unlimited1 said:
i've got a honor 5x KIW-TH00L and current reside in Nigeria where network carriers operate at B1(2100) UMTS but it ain't support on my device. what can i do to enable or add a frequency band ?
Click to expand...
Click to collapse
You can't man. It's hardware.
Sent from my honor 5X using XDA Labs
vsriram92 said:
Was this successful ? Any update ?
I'm planning to flash my KIW-L23 to KIW-L24 as all bands in it were supported by KIW-L24.
No firmware is available to KIW-L23. So I need to change.
Click to expand...
Click to collapse
On other honor models, it involved changing oeminfo file.. but for 5x, it's risky i read.
Chances of bricking as per other members. One guy tried n lost his IMEI it seems (on 4pda.ru)
http://4pda.ru/forum/index.php?showtopic=729380
there's a lot of info here.. including going back from B360 to 350
nimms said:
On other honor models, it involved changing oeminfo file.. but for 5x, it's risky i read.
Chances of bricking as per other members. One guy tried n lost his IMEI it seems (on 4pda.ru)
http://4pda.ru/forum/index.php?showtopic=729380
there's a lot of info here.. including going back from B360 to 350
Click to expand...
Click to collapse
Yes. Changing that partition should only be done automatically by the stock updater.
Sent from my honor 5X using XDA Labs
adriansticoid said:
Yes. Changing that partition should only be done automatically by the stock updater.
Click to expand...
Click to collapse
So I need to he in EMUI 3 forever
Hi,
my Honor 9 (STF-AL09) entered in bootloop after flashing SuperSU (v.2.82). I need to know the build number of my Honor 9 to can download and flash the right ROM.
-Honor 9 STF-L09
-TWRP 3.1.1-1
- Bootloader Unlocked
Which region this honor 9vwas bought from?! (country, retailer)
In Switzerland and I bought it in Fnac.ch
jacquesallet said:
In Switzerland and I bought it in Fnac.ch
Click to expand...
Click to collapse
So you have the European model, it's STF-L09C432B??? You need to remember what exact update you were on (b120 or b130...)
That's my problem I don't remember. I bought it the 20th July.
When arrived the b120 and b130 maybe I could find the right version. And is there a method to find the build number with Adb/Fastboot?
Thanks for your reply ??
I can't answer you
Rommco05 said:
I u sure u receive some update? Any update? If no your build number will be B100
Click to expand...
Click to collapse
I don't remember to have Dona any update so yes I should be on B100.
So does anybody knows where download STF-L09C432B100???
Thanks.
Rommco05 said:
I'm looking for but I find only B120 and B130 :/
Click to expand...
Click to collapse
Yes me too that's why I created a new thread: https://forum.xda-developers.com/honor-9/help/how-to-update-stf-l09c432b100-bootload-t3661775
Thanks for helping me.
I couldn't find b100 anywhere, how about trying with honor support?!
Friends, if the firmware is not approved in FirmwareFinder we can only download and do not install??
It will download but It won't install. Since today it can't find any firmwares for the c432...
inthedark22 said:
It will download but It won't install. Since today it can't find any firmwares for the c432...
Click to expand...
Click to collapse
FF's database was down, it's back up now.
My firmware is the bla-L29 8.0.0.126 and I'm still with the March security patch.
To update, pay the Funkhuawei or wait for the update to arrive?
Hi,
HFF'S work properly for me, I have mate 10 pro L29-C185 this afternoon I find .133 firmware (previously I was on .126) downloading I just installed it. Everything it's ok
Is it possible to download the firmware and flash it with TWRP?
Lykeul said:
Hi,
HFF'S work properly for me, I have mate 10 pro L29-C185 this afternoon I find .133 firmware (previously I was on .126) downloading I just installed it. Everything it's ok
Click to expand...
Click to collapse
was it approved? what method did you use to install?
Buran79 said:
was it approved? what method did you use to install?
Click to expand...
Click to collapse
For downloading firmware I use in-app method and after download use update button from huawei system, you know in settings->system->update system
Psych Engel said:
Is it possible to download the firmware and flash it with TWRP?
Click to expand...
Click to collapse
You can using https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I've tested it and it works on Mate 10 Pro
ante0 said:
You can using https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I've tested it and it works on Mate 10 Pro
Click to expand...
Click to collapse
Thanks for answering. Where I've to place the files, because the Mate 10 Pro doesn't have a SD card?!
Lykeul said:
For downloading firmware I use in-app method and after download use update button from huawei system, you know in settings->system->update system
Click to expand...
Click to collapse
Was the firmware approved for download? In my bla-L29 8.0.0.126 says that the firmware are not approved for download, although it manages to download using FF itself.
Psych Engel said:
Thanks for answering. Where I've to place the files, because the Mate 10 Pro doesn't have a SD card?!
Click to expand...
Click to collapse
Internal storage, but you'd need to update TWRP to this one which has decryption support: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
rioferraz said:
Was the firmware approved for download? In my bla-L29 8.0.0.126 says that the firmware are not approved for download, although it manages to download using FF itself.
Click to expand...
Click to collapse
What your region cust? C185 C432 C576 C605...
ante0 said:
Internal storage, but you'd need to update TWRP to this one which has decryption support: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Click to expand...
Click to collapse
I'm using this one. Was the first one with an BLA-L09 device. If I place it on the internal storage, won't it be deleted, because I've to wipe all partitions? Sry for so much questions, I only won't brick my phone. Now a lot about this stuff, but each phone is unique and has its own special things to look for.
Psych Engel said:
I'm using this one. Was the first one with an BLA-L09 device. If I place it on the internal storage, won't it be deleted, because I've to wipe all partitions? Sry for so much questions, I only won't brick my phone. Now a lot about this stuff, but each phone is unique and has its own special things to look for.
Click to expand...
Click to collapse
You don't need to Wipe anything. Internal sd is mounted in /data which is not wiped.
Well, it's either that or use HWOTA to update.
Or wait for firmware to be approved
Lykeul said:
What your region cust? C185 C432 C576 C605...
Click to expand...
Click to collapse
C605.
ante0 said:
You don't need to Wipe anything. Internal sd is mounted in /data which is not wiped.
Well, it's either that or use HWOTA to update.
Or wait for firmware to be approved
Click to expand...
Click to collapse
It's approved for my device. But it should be blocked on the device or I'm wrong. On my last devices, I wasn't able to update the original firmware from the system itself, because TWRP and Magisk were installed.
rioferraz said:
C605.
Click to expand...
Click to collapse
I find your firmware take the first of list, fullota-mf
Psych Engel said:
It's approved for my device. But it should be blocked on the device or I'm wrong. On my last devices, I wasn't able to update the original firmware from the system itself, because TWRP and Magisk were installed.
Click to expand...
Click to collapse
Yeah, you'd have to restore stock Recovery, and OTA might install (it checksums partitions and if they don't match the update fails)
You could still use Firmware finder to install FullOTA.
Lykeul said:
I find your firmware take the first of list, fullota-mf
Click to expand...
Click to collapse
Translating the dialog box: "The firmware is not approved for installation"
Anyone tried using the firmware update app to download the latest update ?
Kavitam said:
Anyone tried using the firmware update app to download the latest update ?
Click to expand...
Click to collapse
Emui 8.1 won't support ff update as of now.
miststudent2011 said:
Emui 8.1 won't support ff update as of now.
Click to expand...
Click to collapse
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
For that you need bootloader unlocked. I think he is trying to do that on stock unmodified .
youtuber123 said:
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
as of now theres is no 'no check recovery'
awells845 said:
as of now theres is no 'no check recovery'
Click to expand...
Click to collapse
There is : https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 confirmed working on other devices from Huawei/Honor
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
There is : https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 confirmed working on other devices from Huawei/Honor
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
Thanks.
Just a quick heads up for everyone thinking of using HuRUpdater for Honor 10 as I hard bricked my Honor 10 trying it out even by triple checking instructions carefully. It's definitely not compatible with it. Now I had to get it sent off for warranty repair. :crying:
awells845 said:
Thanks.
Just a quick heads up for everyone thinking of using HuRUpdater for Honor 10 as I hard bricked my Honor 10 trying it out even by triple checking instructions carefully. It's definitely not compatible with it. Now I had to get it sent off for warranty repair. :crying:
Click to expand...
Click to collapse
Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
No nothing at all. Tried everything. It's completely hard bricked. I even tried getting it to boot into fastboot mode but the display doesn't even turn on. I had to beg my mum to let me buy a new smartphone. I'm thankfully getting the OnePlus 6 and will sell the Honor 10 when it comes back from repair to pay my mum back. The only thing stuck in my mind is wishing I had just used erecovery earlier.
awells845 said:
No nothing at all. Tried everything. It's completely hard bricked. I even tried getting it to boot into fastboot mode but the display doesn't even turn on. I had to beg my mum to let me buy a new smartphone. I'm thankfully getting the OnePlus 6 and will sell the Honor 10 when it comes back from repair to pay my mum back. The only thing stuck in my mind is wishing I had just used erecovery earlier.
Click to expand...
Click to collapse
Which build did you try ?
miststudent2011 said:
Which build did you try ?
Click to expand...
Click to collapse
I used HurUpdater v0.3.zip and downloaded all firmware files for COL-L29 8.1.0.1.0.4 and renamed the files to match the HurUpdater thread https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Then I flashed in TWRP Recovery. It flashed successfully and I rebooted once complete. Then I got the black screen of death and tried to turn the phone on.
It's strange as the thread shows that it works for the P20 that has the same processor and confirmed by a user.
awells845 said:
I used HurUpdater v0.3.zip and downloaded all firmware files for COL-L29 8.1.0.1.0.4 and renamed the files to match the HurUpdater thread https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Then I flashed in TWRP Recovery. It flashed successfully and I rebooted once complete. Then I got the black screen of death and tried to turn the phone on.
It's strange as the thread shows that it works for the P20 that has the same processor and confirmed by a user.
Click to expand...
Click to collapse
I think there is some issue with those build in firmware finder one of my friend tried .120 build with HurUpdater and it flashed but got different device build installed. Its showing device as fty-l29 with chipset-boston as build number and may security patch .
But when he tried with 104 his device also bricked and currently can't switch on. Does any one of you know a way to recover it.
miststudent2011 said:
I think there is some issue with those build in firmware finder one of my friend tried .120 build with HurUpdater and it flashed but got different device build installed. Its showing device as fty-l29 with chipset-boston as build number and may security patch .
But when he tried with 104 his device also bricked and currently can't switch on. Does any one of you know a way to recover it.
Click to expand...
Click to collapse
Ah okay, glad I'm not alone. I tried to search for solutions too but nothing. It would be ideal if Huawei/Honor had a similar tool like what OnePlus have for there devices because it's as simple as using an MSM Download Tool and installing the Qualcomm Drivers and then flashing all files in the firmware. Huawei/Honor could have one for Kirin devices.
HELP
I need to go from emui 10 to 9.1 in mate 20 pro but I have not been able to, through hisuite it is not possible I do not see an option
I have the C432 compilation and to which I want to return is 9.1.0.350 c45E
why do you need to downgrade? does 10 has issues, camera quality?
help
gen5000 said:
why do you need to downgrade? does 10 has issues, camera quality?
Click to expand...
Click to collapse
Yes ,
and huawei services closes often
mistegt1995 said:
Yes ,
and huawei services closes often
Click to expand...
Click to collapse
Interesting! Tell us a little more about the issues, if you can.
I will have to rethink about update to 10, in this case!
Was it the beta version of 10?
If so, then you should be able downgrade, I suppose.
gen5000 said:
Interesting! Tell us a little more about the issues, if you can.
I will have to rethink about update to 10, in this case!
Was it the beta version of 10?
If so, then you should be able downgrade, I suppose.
Click to expand...
Click to collapse
It was not beta, I had version 9.1.0.350 (C45E1) Tigo
but I saw in previous post that I was emui 10 and I did the process with dload without seeing that I installed the compilation (c432E7) that is different from my region and I think that from there the problems started
i went back through HiSuite 9.1
mistegt1995 said:
It was not beta, I had version 9.1.0.350 (C45E1) Tigo
but I saw in previous post that I was emui 10 and I did the process with dload without seeing that I installed the compilation (c432E7) that is different from my region and I think that from there the problems started
Click to expand...
Click to collapse
Install dload emui10 C45's cust&preload.
If not available, a fix would be to rename emui10 dload cust&preload from wrong cust region to right C45 filenames with right vendorcountry name for your device.
You'll end up with a booting device which will work fine for now with wrong region cust&preload until C45's are available.