Related
When using the MHL adapter, is the whole screen mirrored or is it just some apps like gallery/youtube?
Also, does Cyanogenmod (AOSP) work with it?
yousefak said:
When using the MHL adapter, is the whole screen mirrored or is it just some apps like gallery/youtube?
Also, does Cyanogenmod (AOSP) work with it?
Click to expand...
Click to collapse
It is full mirroring of the whole screen great huh? I found that out here:
http://www.youtube.com/watch?v=qXotbjcB6xA
And as far as I know Cyanogenmod does not have it yet but i'm really sure it will soon.
Yup, it does full mirroring, so you can play games as well
The bad part is that i got the ikross mhl adapter and it seems to be defective or smth, cause it keeps disconnecting for no apparent reason (even if i don't touch it).
My question is which mhl adapter is worth buying? I'd really like one i could use while moving the phone. Should i just go with the original one from htc? but that's a bit expensive. Any suggestions?
I have the T-Mobile brand and have no issues with it. It's been carried around in my laptop bag for a while, still works perfect. $20 from the store and around $27 shipped if you order from their site
Sent from my PG86100 using xda premium
Which adapter charges as well?
All of them should, that's their design. Mhl plugs in to the phone, charger and hdmi plug in to the mhl. I know that atleast the T-Mobile version does, all should though. It mirrors everything, and charges my phone just fine at the same time.
Sent from my PG86100 using xda premium
Got my MHL for $15.73 shipped from Monoprice. Been using it everyday since the day I got it to stream netflix and other TV/movie sites from my 3D or off one of the flyers in my house. It's probably been in use for 60+ days straight for about 5-6 hours each day, maybe more... I don't have cable or satellite I'm actually thinking of ordering another one maybe two just in case this one breaks or gets lost.
The monoprice adapter works very well. I've had no connection problems - and I get a great picture depending on the app. Diceplayer works particularly well for putting out HD video.
The only possible drawback is that the monoprice adapter limits you to USB charging, not AC charging - when you use it. So if you're streaming while outputting to the TV, you'll still lose a small amount of phone battery.
On another thread specifically on the MHL adapter charging topic - no one confirmed whether the other chargers were registering AC charging or not. That might be the one advantage in getting another brand.
P0ll0L0c0 said:
The monoprice adapter works very well. I've had no connection problems - and I get a great picture depending on the app. Diceplayer works particularly well for putting out HD video.
The only possible drawback is that the monoprice adapter limits you to USB charging, not AC charging - when you use it. So if you're streaming while outputting to the TV, you'll still lose a small amount of phone battery.
On another thread specifically on the MHL adapter charging topic - no one confirmed whether the other chargers were registering AC charging or not. That might be the one advantage in getting another brand.
Click to expand...
Click to collapse
I will test my T-Mobile MHL adaptor tonight to verify that it is ac charging. I do know that I gain battery life when streaming though, so I assume it is
Sent from my PG86100 using xda premium
stanglifemike said:
I will test my T-Mobile MHL adaptor tonight to verify that it is ac charging. I do know that I gain battery life when streaming though, so I assume it is
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Thanks - please do. People in the other thread assumed their phone was charging whether streaming or not - but couldn't confirm with testing values. I thought my phone was charging as well - until I installed a battery monitor and checked. After using many - Battery Monitor Widget appears to work the best on our phone.
If you could test your MHL adapter while streaming, and report back the charging rate reported - that would be a great help. Please report what radios you have on, I usually leave all of them on for testing purposes.
I'm very interested to see if any of these MHL adapters will charge while streaming, as well. I plan on this being my next accessory for the 3D but I don't want to get one that charges with half power.
Forgot to test out the other night. I'll try an get to it tonight before going to bed. Oh, I use Battery Monitor Widget Pro. Saw some one mentioning that app earlier, so you'll be able to relate fully. For radios, Wifi and Mobile Network are never turned off on my phone. That's how I'll be testing as I never have Bluetooth on when steaming movies, and only have GPS on when I'm using Navigation or an app that needs GPS. Obviously won't need GPS to stream a movie in my house...
Sent from my PG86100 using xda premium
got Monoprice MHL to charge last night while streaming
Took quite a bit of tinkering, but finally got positive charging (albeit not much) while streaming Battle of Midway from Netflix and the Wire from HBO GO last night. Using WTSB 1.9 rom and Monoprice MHL adapter.
What I had to do was:
-Airplane Mode;
-Turn on Wifi;
-Turn off account sync;
-Taskmanager to kill off everything but netflix;
-Use SetCPU to underclock to (648ishMHZ for netflix) or (900ishMHZ for HBO GO);
-Covedesign app to turn off button backlights;
-Covedesign app to go to backlight "blink" and disabled blink (like jumping rope) just at the right time for the backlight to stay off (may have to do this several times)(though this makes it damn hard to interact with phone unless you have bt mouse or keyboard - if not, may just want to turn brightness down as far as you can get);
My setup:
Evo3d streaming via wifi from iSpot 4G Clear device, outputting via MHL to optoma pk201 pico projector, with stock charger+usb, and audio via MHL/HDMI to pico projector.
Comment:
Netflix ROCKS (wonder why no stock landscape UI though)!!! Great streaming, no hiccups; HBO GO, on the other hand, (while AMAZING selection) constantly drops out to "Audio only stream, connect to stronger network or wifi for video", stutters, ... all kinds of crap and this is on a pretty regular 6mbps 4G Clear iSpot!
---------- Post added at 01:02 PM ---------- Previous post was at 12:55 PM ----------
BTW, anyone know of an app that lets you monitor your total mA usage live?
like a graphing app or anything?
There used to be a great one for WM6 that showed, for example 400milliamps with screen on, and 200milliamps with screen off and graphed it over time.
I keep getting pissed off with these phones; can anyone help me (I've been searching for years and can't find answers) mind you, I'm coming from the x51v wm6.5.3; PalmTX; Sammy Omnia...
-Why can't we turn off the backlight to the screen?
-Why can't we MANUALLY rotate to landscape or portrait? (I know you can manually engage or disengage the AUTOmatic rotation feature)
-(maybe this does exist) Why can't we get readings on how many mA we are using?
It just seems like the x51v from 2002 was so much more advanced and customizable, seems like we are re-creating the wheel over and over again.
Sorry for the rant.
Battery Monitor Widget, as mentioned in the post previous to yours...
P0ll0L0c0 said:
Thanks - please do. People in the other thread assumed their phone was charging whether streaming or not - but couldn't confirm with testing values. I thought my phone was charging as well - until I installed a battery monitor and checked. After using many - Battery Monitor Widget appears to work the best on our phone.
If you could test your MHL adapter while streaming, and report back the charging rate reported - that would be a great help. Please report what radios you have on, I usually leave all of them on for testing purposes.
Click to expand...
Click to collapse
My MHL adapter mirrors everything and charges directly from the wall.
LiquidSolstice said:
My MHL adapter mirrors everything and charges directly from the wall.
Click to expand...
Click to collapse
Ummm... Thanks? You provided exactly zero new information.
P0ll0L0c0 said:
Ummm... Thanks? You provided exactly zero new information.
Click to expand...
Click to collapse
Except...I did. For this person:
bagelicious said:
I'm very interested to see if any of these MHL adapters will charge while streaming, as well. I plan on this being my next accessory for the 3D but I don't want to get one that charges with half power.
Click to expand...
Click to collapse
MHL Adapters are required to charge while being used, in fact, they only function if the charger is plugged in. That's part the spec, and I'd like to think I know quite a bit about MHL since I've done work and testing on the product for the company that created it, which is Silicon Image : http://www.siliconimage.com/products/family.aspx?id=10 . As for the quoted person, the adapter is not supposed to the the problem (unless you're getting a cheap knockoff one) but the power output of your charger can be an issue as well. The original Evo 3D charger outputs the proper power for the adapter to charge your phone properly. If you're using a cheap generic brand eBay MicroSD power cord, it will most likely not charge at the same output.
I've been using and testing these adapters before you ever knew about them. Is that enough information for you?
Went to a friends after work an just got home a little while ago. Battery is at 15% so instead of putting in a freshly charged battery, I'm going to test my T-Mobile MHL Adaptor for those interested. Hope to post results tonight, definitely going to test tonight though even if results aren't posted until the morning.
Sent from my PG86100 using xda premium
Sent from my PG86100 using xda premium
@LiquidSolstice What the heck's a "cheap generic brand eBay MicroSD power cord"? Did you mean microUSB? So much for your expertise... Dunno what you're going on about, but the MHL adapters could very well affect the current fed to the phone since it's literally going THRU them. Have you tested every single MHL adapter? Even if there's a spec they should conform to, it doesn't mean they all do, just like all chargers out there are not 1A chargers with properly shorted pins to deliver 1A.
The concerns you quoted and dismissed were valid, no need for that attitude. The USB cable used shouldn't really matter in the vast majority of cases, resistances introduced by even the thinnest retractable cables are pretty much negligible... I've actually tested that too. It really comes down to the charger, and possibly the MHL adapter that's in between. If mike hasn't posted his results with the T-Mo adapter tomorrow I'll test mine as I have the same one. Can't speak for the MP adapter as I don't have it, MP usually sells quality cables & adapters tho.
Impulses said:
@LiquidSolstice What the heck's a "cheap generic brand eBay MicroSD power cord"? Did you mean microUSB? So much for your expertise... Dunno what you're going on about, but the MHL adapters could very well affect the current fed to the phone since it's literally going THRU them. Have you tested every single MHL adapter? Even if there's a spec they should conform to, it doesn't mean they all do, just like all chargers out there are not 1A chargers with properly shorted pins to deliver 1A.
The concerns you quoted were valid, no need for that attitude. If mike hasn't posted his results with the T-Mo adapter tomorrow I'll test mine as I have the same one. Can't speak for the MP adapter as I don't have it, MP usually sells quality cables & adapters tho.
Click to expand...
Click to collapse
So much for my expertise? Tell you what. Remove the MHL adapter out of the question. Try to charge the phone using a Samsung Moment power cord. It's all MicroUSB as you say.
It won't properly charge. Just because a power cord has a plug on one end a MicroUSB on another doesn't mean they're all equal. The point that I'm responding to is that unless you're buying a knockoff MHL adapter (or a really, really cheap one) the spec specifies that they all charge from both USB and AC, and that there is enough power to properly charge the device.
I have seen the Motorola Lapdock being used with some other phones (Sony Xperia?) and even with stuff like an Xbox 360 or PS3, just wondering if anyone knows if the Rezound would work using the MHL HDMI adapter. If it would charge the phone, and the keyboard and touchpad worked, that would be great, but I am primarily just wanting to use it as a portable display during my 12 hour shift at work where I spend most of my time in a parked car.
If this doesn't work, does anyone know of an alternative? Possibly a thin portable monitor that can be run on a battery or plugged into a car? Again, my primary goal is just to output to a bigger screen for video and the occasional websurfing or game, I can always control everything via the phone or like a bluetooth keyboard or something.
vphreeze said:
I have seen the Motorola Lapdock being used with some other phones (Sony Xperia?) and even with stuff like an Xbox 360 or PS3, just wondering if anyone knows if the Rezound would work using the MHL HDMI adapter. If it would charge the phone, and the keyboard and touchpad worked, that would be great, but I am primarily just wanting to use it as a portable display during my 12 hour shift at work where I spend most of my time in a parked car.
If this doesn't work, does anyone know of an alternative? Possibly a thin portable monitor that can be run on a battery or plugged into a car? Again, my primary goal is just to output to a bigger screen for video and the occasional websurfing or game, I can always control everything via the phone or like a bluetooth keyboard or something.
Click to expand...
Click to collapse
Not sure about the Moto dock. I would imagine that you could get an LCD that is made for putting in headrests and whatnot for custom car applications that has an HDMI input and you would be set.
http://www.lilliputuk.com/
http://www.lilliputuk.com/index.php?page=869GL
I would look ^here^
Hmm this is giving me ideas... I was fist thinking of making my rezound dockable with my desktop monitor when ubuntu for android came out, but now im think of making a complete lapdock type thing... interesting.
Keep in mind the charging limitation of the MHL adapter. Because it needs the data pins, they can't be shorted out and in turn the phone will only draw 500mA to charge with, there's a number of complaints about batteries dying while using the adapter as a result.
mjones73 said:
Keep in mind the charging limitation of the MHL adapter. Because it needs the data pins, they can't be shorted out and in turn the phone will only draw 500mA to charge with, there's a number of complaints about batteries dying while using the adapter as a result.
Click to expand...
Click to collapse
Ahh yes, the beauty of dual extended batteries.....
Hi All,
I was wondering if anyone had any insights in to this problem I have been having.
Briefly, I have the 4g lte verion on EE's new network. I purchased the official MHL/HDMI adapter which works fine and the video is outputed to my sammy 50inch tv fine. The issue I have is the battery drains while doing so. I belive this may to due to the phone outputting more than it is drawing from the power source. Any thoughts ?
I spoke with Samsung tech and they said a number of people have started to report this issue and they are currently testing/investigating. If this is indeed the case seems a pointless acessory as a long video would possibly drain the whole battery, Im yet to test the full drain time.
Secondly, with a 3rd party docking cradle with spare battery slot which purchased from amazon (http://www.amazon.co.uk/eLifeStore®-Samsung-Desktop-Charger-Docking/dp/B008PPRGFY) also does not charge phone properly. Even with the orignial charger in the ac port (or usb port) . The phone reports as charging but stays the same or decreases. Charged directly from the socket it is fine. Strange!
Any help or thoughts would be greatly appreciated.
Thanks
Ian
It's common. Mine did that too! I switched to my old S2 charger, problem solved
Thanks Ill try that out, any idea why that works ?
lawboffin said:
Thanks Ill try that out, any idea why that works ?
Click to expand...
Click to collapse
No idea man? A design fault maybe? All I know is that my phone took for f#*%ing ever to charge with the USB type wall charger. I pulled it out of the socket and plugged my other other one in that was sitting right next to it and it started charging? Checked a few minutes later and it had climbed considerably so I pulled the USB cable out of the new plug and kicked it under the bed where it now lays resting not to be used again LOL.
USB plug/cord works perfectly fine? So I use it on the computer. My laptop even charges the phone via the USB cable faster than the socket plug (which is usually the opposite - as I am sure we are all aware). So yeah I would say poor design or defective wall plug or both or something? Wasn't going to send my phone back because of it. 2second decision problem solved Samsung phone is great!
Im having exactly the same problem.
I have an s3 on orange and have the same mhl adapter conected to my tv.
I have tried the charger from my s3 which does says its charging when I connect my phone but only for about a minute so I also tried using the charger from my s2 and that just does exactly the same.
An easier way is to buy the official allshare dongle for your hdtv then you can stream anything from your phones screen direct to your tv and can have the phone on charge via pc or wall socket at the same time,
Hope this helps
i suggest you throw away your original charger (slow charge) and its usb cable (loose - actually caused the extsd to become damaged to the point i had to repartition) and buy yourself a cheap usb cable for data (£2) and a 3rd party charger (pref not a usb adapter one - £5) and all should be fine!
I still experienced a small battery drain while using the mhl adapter, however, i froze a few apps with titianuim (ones i know run all the time like utter and tasker, paragon ntfs, easy ums, directory bind etc), and put it on min brightness - works like a charm. I know its a effort freezing apps but does the trick with my phone... Since finding that out i actually keep paragon & easy ums frozen till i need them...
just a few thoughts for you....
damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge. it stays at 11% afeter 2h i got 12% i turned back to web os for charging.
but this sucks... 130€ tablet died on me today. i saw some new windows8 netbook/tablet asus t100 with full windowas and touchscreen and keyboard for 350€ bbut i dont reealy have 350€ here... sucks.
but there is no way to fix the charging issue?
buy a Touchstone charger
http://www.amazon.com/HP-Touchstone-Charging-Dock-TouchPad/dp/B0055QYJIS
Try another USB cable
reggiexp said:
damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge. it stays at 11% afeter 2h i got 12% i turned back to web os for charging.
but this sucks... 130€ tablet died on me today. i saw some new windows8 netbook/tablet asus t100 with full windowas and touchscreen and keyboard for 350€ bbut i dont reealy have 350€ here... sucks.
but there is no way to fix the charging issue?
Click to expand...
Click to collapse
Try another USB cable they often break. If that doesn't work you can always get a Touchstone and the WiFi file transfer app. That should allow you to keep using the tablet like normal.
The usual HP TouchPad battery drain issues:
-If your battery is heavily drained, then you may need to leave it charging for a full day.
-When the battery is fully drained it can take the TP a longtime to reach even the lowest battery level.
-The USB cable that comes with the HP TP is often defective and breaks easily. Try using another USB cable if possible.
-The USB cable does not transfer enough power to effectively charge the tablet. You must use the wall plug when charging the HP TouchPad.
-To be safe don't let your HP TouchPad run out of Batteries ever! Install one of these free apps!
-You can add an automatic shutdown Rule by doing the following.
-AutomateIt, Play Store Link- What to do: New Rule/Trigger Battery level(Below 20%)/Action/Shutdown//save. Or
-Llama, Play Store Link- Location Profiles:Event tab choose + (at the bottom of the screen) Addcondition (battery Level Below 20%) Actions (turn off phone)
reggiexp said:
damn after almost 3years he the usb port died on me. but i get why cause he must have fall like 5time off my bed on the ground with the charging cable in it. so it fell on the charger port. but unitil today it stoped working, it charges but doent charge.
Click to expand...
Click to collapse
So I was bending over to pull an electrical cord out of the socket behind my entertainment unit, and I used my touchpad (in a case) to support my weight, I didn't realise that I had it cable side down, well just as I grabbed the power cord the usb cable gave way and I thought I had broken my touchpad too.
Anyway, I tried a new cable and it worked fine, these tablets may not be pretty, but they sure are tough.
Hope you have some luck in getting it fixed.
scy1192 said:
buy a Touchstone charger
http://www.amazon.com/HP-Touchstone-Charging-Dock-TouchPad/dp/B0055QYJIS
Click to expand...
Click to collapse
+1
bdsee said:
So I was bending over to pull an electrical cord out of the socket behind my entertainment unit, and I used my touchpad (in a case) to support my weight, I didn't realise that I had it cable side down, well just as I grabbed the power cord the usb cable gave way and I thought I had broken my touchpad too.
Anyway, I tried a new cable and it worked fine, these tablets may not be pretty, but they sure are tough.
Hope you have some luck in getting it fixed.
Click to expand...
Click to collapse
tried every phone charger/usb cable i could find. web os said all voltage wa to low.
so damn. yeah i could buy a 25€ charger. i must see.
RolandDeschain79 said:
Try another USB cable they often break. If that doesn't work you can always get a Touchstone and the WiFi file transfer app. That should allow you to keep using the tablet like normal.
Click to expand...
Click to collapse
its already empty turned it off with 18% i got 5% battery in like 5hours i think.
then i was like **** that i turn it off.
i use airdroid. cause its anoying to go in recovery to go in usb massa storage. mtp doesnt do **** op ICS
but yeah. maybe i will buy the charger. i like android tablet. but saw the asus transformer t100 tablet with dock keyboard windows 8.1 tablet. 350€ 32gb. but more interested in the 380€ 64gb.
but yeah damn 380€ much but its good for studies and things full windows. but still im gonna want my android tablet.
so i think i will buy one day the charger. but euh, if my battery is empty does touchstone charge it from dead? other wise im ****ed...
Had some problem but solved
Hi reggiexp,
I had the same issue of touchpad not charging. But i used my Nokia lumia charger plugged into TP when it is dead throughout the night and found it 48% charged in the morning after i switched on. When i reconnected the tp when it was on it came to full charge in an hour. Try this.
Please ignore the warning that the USB cable is not genuine which comes when you connect different USB cable.
Hope it helps!
Thought I would post this just in case anyone else is looking for a solution here. Purchased this off Amazon: http://www.amazon.com/gp/product/B003ES5ZSW/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Doesn't cause pop any warnings while charging. Still using the plug that was sent with the touchpad and it is working better than the other one. Feels a little more secure while plugged in.
I'm a big fan of the touchstone.
However I sort of have the opposite problem as both of my Touchstone chargers have quite working. Each at different times. My suspicion is they suffered the same faulty cable fate. Unfortunately I won't be purchasing another as they are to expensive to replace at this point.
my touchpad colects dust now. its i think at 70% battery if not more i turned it of. and put it in a drawer Xd
sucks but yeah. i had a great time with it. was realy a BANG FOR THE BUCK, bust buy i ever made
reggiexp said:
my touchpad colects dust now. its i think at 70% battery if not more i turned it of. and put it in a drawer Xd
sucks but yeah. i had a great time with it. was realy a BANG FOR THE BUCK, bust buy i ever made
Click to expand...
Click to collapse
Just a thought, but if you don't plan on using your Touchpad anymore, you could maybe consider donating it to a developer interested in toying with one? To broaden the support base of those still running this thing lol.
Or wait, so is the USB port dead or not? I thought an earlier post made it seem like it wasn't. Sorry if I misread lol.
DBak451 said:
Just a thought, but if you don't plan on using your Touchpad anymore, you could maybe consider donating it to a developer interested in toying with one? To broaden the support base of those still running this thing lol.
Or wait, so is the USB port dead or not? I thought an earlier post made it seem like it wasn't. Sorry if I misread lol.
Click to expand...
Click to collapse
Not dead just a miss connection cause it charges but slow. Toke me almost a week to fully charge it.
Tried different usb cables. Nothing helped.
Think it needs a new usb connector. But i dont use it. And didnt even try to take it apart. Im way to laxy its a grest tablet. Wantrd to give it to my mom but if it doesnt charge well my mom wont have any use for it.
Found a usb board 16euro +10euro sending. But yeah is it worth it... Will try to take my touchpad apart to see if its realy broken. And maybe repair it so my mom has a tablet again.
Does the inductive charging work?
Sent from my AOSP on Grouper using XDA Free mobile app
PunishedSnake said:
Does the inductive charging work?
Sent from my AOSP on Grouper using XDA Free mobile app
Click to expand...
Click to collapse
Don't know don't have a wireless charger
Now you talking about wireless charging i have a wireless charger now for my lg g3 what i don't use don't see the point of it. I should try with my touchpad lol
Or maybe dismount thr hole thing and look at thr usb port see if i can do anything about it. LoL.
Thanks for saying it.
Hey guys,
Just got the 5.1.1 update to my g watch and i noticed some charging differences, namely i can no longer charge my watch with my pc (its an always on pc). I checked cables etc and all are fine, and it will still charge through an AC outlet. Ive tried usb 2.0 and 3.0 ports.
Just wondered if anyone else had noticed this behaviour? The charging indicator wont even show up when its plugged into my pc. Also noting that usb debugging still works through my pc and all is detected fine there
Norman
manor7777 said:
Hey guys,
Just got the 5.1.1 update to my g watch and i noticed some charging differences, namely i can no longer charge my watch with my pc (its an always on pc). I checked cables etc and all are fine, and it will still charge through an AC outlet. Ive tried usb 2.0 and 3.0 ports.
Just wondered if anyone else had noticed this behaviour? The charging indicator wont even show up when its plugged into my pc. Also noting that usb debugging still works through my pc and all is detected fine there
Norman
Click to expand...
Click to collapse
I have the same update, and have the same problem as you, I only noticed it last night when I put it on to charge, I charge mine every night on the same usb port and have had no problems till last night, like yours mine will only charge from mains now, I've tested all my usb ports and they are all working okay. I hope some one has an answer for it.
I´ve checked this and mine works perfectly with a 5m cable connected to a usb hub. I´ve checked with other cables and without hub, and this still works.
I was able to address the issue by rebooting the watch.
JohnnyK58 said:
I have the same update, and have the same problem as you, I only noticed it last night when I put it on to charge, I charge mine every night on the same usb port and have had no problems till last night, like yours mine will only charge from mains now, I've tested all my usb ports and they are all working okay. I hope some one has an answer for it.
Click to expand...
Click to collapse
So do i! Usb ports are working fine, my pc is custom built so i have specific ports designed for quicker charging of anything plugged into them
NYCArcana said:
I was able to address the issue by rebooting the watch.
Click to expand...
Click to collapse
If i reboot the watch whilst it is on the charger, it charges via usb in my pc - but if i take it off and put it back on, the problem returns, despite it still working with an AC charger, i'm assuming this is a software problem as android knows when its charging via usb or AC anyway. Hopefully a dev over here or the LG guys will fix it - i don't want to have to restart my watch every time i want to charge it, it's a pain in the arse and i shouldn't have to do it - i have a lack of AC ports in my room, hence i charge through my pc
manor7777 said:
If i reboot the watch whilst it is on the charger, it charges via usb in my pc - but if i take it off and put it back on, the problem returns, despite it still working with an AC charger,
Click to expand...
Click to collapse
Just checked - same behavior here.
Always fun to be a beta tester for Google. At least there's a workaround.
NYCArcana said:
Just checked - same behavior here.
Always fun to be a beta tester for Google. At least there's a workaround.
Click to expand...
Click to collapse
haha well, i can use an AC power source and charge my phone in my pc, they are both super close to me just my phone takes longer to charge
My watch was slower to charge I did notice that. Took an entire extra hour!
I have the same problem but I posted in the wrong thread (LG G Watch General)
http://forum.xda-developers.com/g-watch/general/watch-charging-update-to-5-1-1-t3115504
Hi
I have 2 chargers because I use one for travel. After updating to 5.1.1, one works and the other does not. I swapped the components and found it was the cable. I hope that this helps.
hallevison said:
Hi
I have 2 chargers because I use one for travel. After updating to 5.1.1, one works and the other does not. I swapped the components and found it was the cable. I hope that this helps.
Click to expand...
Click to collapse
All my cables seem to produce the same result, maybe it's just me - i tried the one that came with a quick charge charger and even that does the same thing. hmm, will pick up a new cable tomorrow and check it out!
I just had my watch on the charger and with out taking it off, restarted it and now it is charging. Definitely a bug of some sort
sent from a device using an app
manor7777 said:
All my cables seem to produce the same result, maybe it's just me - i tried the one that came with a quick charge charger and even that does the same thing. hmm, will pick up a new cable tomorrow and check it out!
Click to expand...
Click to collapse
I wouldn't bother. Some chargers just behave like USB devices to be able to charge older Blackberrys. I used the same cable with the PC and with a wall wart. Only the wall wart works unless I reboot the watch.
Thanks, most people seem to confirm its a bug.. That's what I love about xda, you can always find things like this. Thanks for all your help.
Hi, glad I found this thread.
I am having the same problem. It doesn't charge since the 5.1.1 update, but if it lays on the charger and I reboot it, it charges. If I take it off and put it back on, it doesn't charge and I need to reboot it again.
Have the same problem. After reboot, it charges on usb much slower but doesn't look like it (No charging icon). Otherwise I love the update.
Did you all factory reset after updating your watch? I also couldn't charge until I rebooted but it charges fine after the reboot.
Same issue
I can confirm the same behaviour. I have to reboot the g watch and then it start charging. Definitely a bug
Same here, watch was charging wen I went to sleep but charging stopped at around 60%
Verstuurd vanaf mijn Nexus 5 met Tapatalk
I've expressed my frustration over at the Android Wear help forum:
https://productforums.google.com/fo.../VRbw2FWOaiI;context-place=forum/android-wear
Oddly, my watch did NOT include the wall charger even though I got it new from Best Buy. Did anyone else not get a wall charger? I'm not the type to just blindly miss something as useful as a USB wall charger. I remember opening it up and saying to myself, "I guess I'll have to use my monitors USB port." I don't throw that stuff out. I still have the box and all the packing materials as well, and it's nowhere in there.