Hello from France !
On a non-rooted Mate 10 pro when I try to allow USB debugging, I got a message "an application conceals the authorization request. parameters can not verify your answer". But I don't know which one.
Any help please ?
ghenarys said:
Hello from France !
On a non-rooted Mate 10 pro when I try to allow USB debugging, I got a message "an application conceals the authorization request. parameters can not verify your answer". But I don't know which one.
Any help please ?
Click to expand...
Click to collapse
Hi,
Same here. If you have enabled, disable navigation dock and it works. Or disable any apps with screen overlay permission.
Related
Hi All,
I'm new here,
I'm wondering if there is any chance to root my Humax H1 android HD wifi receiver,
Thank you,
Best regards.
omaremad82 said:
Hi All,
I'm new here,
I'm wondering if there is any chance to root my Humax H1 android HD wifi receiver,
Thank you,
Best regards.
Click to expand...
Click to collapse
not sure, try kingo with pc and kingroot without pc, if not work wait for custom recovery
XN Logos said:
not sure, try kingo with pc and kingroot without pc, if not work wait for custom recovery
Click to expand...
Click to collapse
thank you, but i have a problem that there is no play store in this box, only something called humax store as a limited apps to install, and when to try to install apk from a flash memory it said: file not supported and when to try to enable from unknown sources it aked for a password, that ieven it's not showing any field to fill the password
up
plz help
omar emad ....
do you found the solution ?
i have the same issue ..
1st every thing was running good ...
even there is no google play store .. but the "unknown sources" was enabled
but after the last update ...
they close and disabled everything ...
i feel ...
i was cheated with this device
omaremad82 said:
Hi All,
I'm new here,
I'm wondering if there is any chance to root my Humax H1 android HD wifi receiver,
Thank you,
Best regards.
Click to expand...
Click to collapse
Hi, i hacked the password, when you press the apk file, it will ask you for password then on the remote press the arrows button: left right left left right up down up up down
then it will open settings then press install from unknown sources, press agree and you are done. After that download kingo root from here: https://root-apk.kingoapp.com/kingoroot-download.htm
Install it, Make shure your wifi is turned on the humax, then connect a usb/wireless mouse or use phone with humax cast app to control the mouse, click root then wait for it to get rooted, if it is stuck in 90% press back on the remote then a fail will show but it is rooted just restart it, delete kingo root then open the superuser app.
(NOT FAKE)
KBJ911 said:
up
plz help
Click to expand...
Click to collapse
I wrote a answer
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
How to get avtivation code 4 huawei media pad gr8
Ameer latif said:
How to get avtivation code 4 huawei media pad gr8
Click to expand...
Click to collapse
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
The following errors occurred with your submission:
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Click to expand...
Click to collapse
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
methods can check out my blog:
HUAWEI S7-701U Gr8 ACTIVATION CODE BYPASS OR FIRMWARE 100%
METHOD 1: To perform hard reset for your Huawei S7-701u you may need to save all of your apps and files to your memory card and take it out...
dreamyskyblue.blogspot.com
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
B
traviskb said:
im just thinking to make a thread (to make it easy to find) for those are looking the solution for Gr8 activation code.
credit to [email protected] :good::good::good::good::good:
feel free to click " Thanks " to make others easier to find this thread on searching
[SOLVE] Gr8 Activation Code For All Huawei Device :victory:
1) turn on the Huawei media pad/phone, unlock the screen
2) plug in to computer/laptop windows 7,8 or windows 10
3) on the Huawei media pad screen, it will pop up usb setting, select hiSuite usb type option
4) at the andoid setting, please go to about table setting, then enable developer mode by taping 7 times at Build number
5) still at android setting, go to security, make sure your android Screen lock setting is set under Huawei unlock,the go to shortcut setting, need to set to google app and android setting app.
6) install HiSuite to your computer - this is the Huawei official computer device managed software tool
7) install iRoot software to your computer. careful with this installation, it full of bloatware, but don't worry it don't have a virus.
8) run the iRoot and it will root your device. It will restart your Huawei pad multiple times.
9) after it root complete, unlock your device then go to google play ( as your android unlock setting option have the google play as describe in step 5)
10) install System app remover from google play
11) open the app, go to inside the app setting, remove setting Hide core system app
12) go to the main menu of the app remover, under manager, select system app, now you can find gr8 gallery app. Removed that app then restart the device.
13) you will have multiple error in android, just reboot and the error gone. DONE
Click to expand...
Click to collapse
Bt how I install app remover were as the phone is unaccesable,
billson.chew.my said:
Hi, found a reply in a facebook post with the bypass code shared by Mohd Ridzwan.
But due to restriction of my account, i hit below msg while having url in the reply.
Please google: Gr8 powered by Malay Mail "Lim KY" "Mohd Ridzwan"
And look for the reply in the post by Lim KY, February 22, 2016 · Kuala Lumpur.
Click to expand...
Click to collapse
How can I by pass, i have the code the problem is the WiFi, Wereas it is connected,
Hi guys, i have one question and one problem :
Question: Is there anyway to enable or install "Darken interface" on our P20-Lite just like Mate 20 Pro? I almost tried all Dark Themes but they all have problem in Notification Area, Settings, etc...
Problem: In the HiVision only the QR Code works and other options like Translate, Calories and etc... doesn't work or recognize any thing at all. Is there some Region Restrictions?! I'm from IRaN.
And one last thing i found my AppGallery not working as well. I tried even with VPN and it's showing the following error :
"Unable to connect to server. Please try again later."
ANE-LX1 9.1.0.132(C185E3R1P8)
I bought a Changan CS75 Plus Smart 2023. I tried to connect my Android phone to the car Radio Head unit using CarAuto (Global) App. But I could not download any Android Apps to the system. Can you help me with that Please?
Also can I download and use Android Auto App on the system or Car Play? How can I do that? Is there a software or an App or a dongle that will do that?
What is the code or number to get into the Android system of the Changan CS75 Plus 2023.
Thank you for your help, consideration, and Cooperation.
Can anyone please share the step on how to access the developer option and the passcode to enter in the system..
Hey, I own Cs75 plus 2022 smart
I'm struggling with the same thing. But I found these codes, It may help you guys.
for adb *#518121#* ( I don't know what this is for but I found it)
for file explorer *#518200#*
for settings *#518300#* (from here you can find the developer option
for car settings *#201301#* (don't miss it, it is very dangerous if you don't know what to do)
M7mdrd1 said:
Hey, I own Cs75 plus 2022 smart
I'm struggling with the same thing. But I found these codes, It may help you guys.
for adb *#518121#* ( I don't know what this is for but I found it)
for file explorer *#518200#*
for settings *#518300#* (from here you can find the developer option
for car settings *#201301#* (don't miss it, it is very dangerous if you don't know what to do)
Click to expand...
Click to collapse
where do i put this codes?, I have a Changan CS55 Plus. You now where I can find info about updates?
smelor said:
where do i put this codes?, I have a Changan CS55 Plus. You now where I can find info about updates?
Click to expand...
Click to collapse
Use the phone panel
Any one was able to install apps? It is giving me not authorized error
mohamadabdou said:
Any one was able to install apps? It is giving me not authorized error
Click to expand...
Click to collapse
Same problem I tried to install using the file explorer on the developer options but still unauthorized error
i have the factory unlocked 10t no mods. The OTG will detect a flash drive and ID it but refuses to read or write to it, even when given the permission to do so.
It shows up in settings/storage but the only thing i can do with it is to eject it. No file manager will access it to read or write. If i try to create a file or folder it gives a generic error. I t-shot with OP and sent them Logs and got nothing back from them. The ONLY setting for OTG is OTG Connection which switches it off after 10 minutes. Doesn't seem to effect it at all. There are 2 settings in Developer Mode Default USB Config and Select USB Config. no combo of settings has gotten me a working OTG.
Has anyone gotten this to work or have any suggestions plz?
Thanks in advance!
toptech33 said:
i have the factory unlocked 10t no mods. The OTG will detect a flash drive and ID it but refuses to read or write to it, even when given the permission to do so.
It shows up in settings/storage but the only thing i can do with it is to eject it. No file manager will access it to read or write. If i try to create a file or folder it gives a generic error. I t-shot with OP and sent them Logs and got nothing back from them. The ONLY setting for OTG is OTG Connection which switches it off after 10 minutes. Doesn't seem to effect it at all. There are 2 settings in Developer Mode Default USB Config and Select USB Config. no combo of settings has gotten me a working OTG.
Has anyone gotten this to work or have any suggestions plz?
Thanks in advance!
Click to expand...
Click to collapse
Good time. The solution to the problem was found. Install the program from the link
Edit Moderation - Link to 4pda is crap - Use strictly banned
Give permissions when connecting USB, enable the following in the settings
jokersss84 said:
Good time. The solution to the problem was found. Install the program from the link
Edit Moderation - Link to 4pda is crap - Use strictly banned
Give permissions when connecting USB, enable the following in the settings
Click to expand...
Click to collapse
Thanks. But I have already tried MiXplorer. It didn't read either. I'm beginning to believe that the USB -c socket on my 10T is damaged in some way. I'm looking for the best and cheapest way to get it replaced. Thanks again.