why does not twrp for huawei ALP-L29? please help me
Maybe we need a need thread just for ALP Mate 10's.....
We are being overshadowed by the BLA's
....
ums1405 said:
Maybe we need a need thread just for ALP Mate 10's.....
We are being overshadowed by the BLA's
....
Click to expand...
Click to collapse
Why don't you try the version for Mate 10 Pro? If it works good for you, if not, just restore the stock recovery.
Reportedly, the version for Mate 10 Pro by Pretoriano80 works fine if you use an OTG cable with a mouse. If you can then provide log reports then I'm sure the touch issues may eventually get resolved.
What i am curious to know is if there arr any roms availablr to flash... Or can we have root access. I for one would love to debloat my phone. Too many apps on here i dont use do not understand and do not want.
Same, hoping there'll be a working version of TWRP for the non-pros.
xxlap1xx said:
Same, hoping there'll be a working version of TWRP for the non-pros.
Click to expand...
Click to collapse
Try the new update of TWRP by @Pretoriano80, seems like the touch issues on Mate10 have been fixed. [emoji1303]
Inviato dal mio BLA-L09 utilizzando Tapatalk
Pretoriano80 said:
Why don't you try the version for Mate 10 Pro? If it works good for you, if not, just restore the stock recovery.
Click to expand...
Click to collapse
how to do stock recovery process?
dafunk2 said:
Try the new update of TWRP by @Pretoriano80, seems like the touch issues on Mate10 have been fixed. [emoji1303]
Inviato dal mio BLA-L09 utilizzando Tapatalk
Click to expand...
Click to collapse
Just tried but no luck
xxlap1xx said:
Just tried but no luck
Click to expand...
Click to collapse
Stock emui?
Can confirm the latest twrp test build work with ALP-LP29. Got stuck at TWRP logo with previous test builds. By the way, My Mate 10 is on 8.0.0.132.
Maxikus2711 said:
Stock emui?
Click to expand...
Click to collapse
Yes, got it working using this one https://mega.nz/#!4oUSkZTY!9aBaZ2ITx...FjkxMKBH5vXSJU
Had to do 'fastboot erase userdata' as suggested from the other thread, boot looped a few times until it gets into eRecovery for me to shutdown the device so I can cold boot it back into TWRP. I then formatted data and was able to boot again.
hi, what can i do with twrp for now?
Flash original firmware, flash aosp? which one..
Related
If anyone has put Xposed on their Honor 5X with the latest MM 6.0.1 update could you post which version/installer and if you had any problems?
no working on last xposed version, using twrp to flash.
stuck on HONOR animation for 10min and getting a bit hot
tried xposed uninstaller and everything is working now
Using this version: xposed-v86-sdk23-arm64.zip
With this apk.
Working well on both stock ROM b330 and CM13.
First boot can be a bit long, just be patient.
I used the file @mooms supplied and the first boot took a very, very long time. At first I thought it was stuck. But finally it booted up and it's working.
harryspar said:
I used the file @mooms supplied and the first boot took a very, very long time. At first I thought it was stuck. But finally it booted up and it's working.
Click to expand...
Click to collapse
20mins?
danino2200 said:
20mins?
Click to expand...
Click to collapse
It was at least 20, maybe even 25. I just left it alone for a while and did something else.
BTW, an entirely different issue is which Xposed Modules will be compatible.
Amplify works (for battery saving).
But many other modules (eg GravityBox) say they do not work with OEM skinned ROM's, only pure AOSP.
harryspar said:
It was at least 20, maybe even 25. I just left it alone for a while and did something else.
BTW, an entirely different issue is which Xposed Modules will be compatible.
Amplify works (for battery saving).
But many other modules (eg GravityBox) say they do not work with OEM skinned ROM's, only pure AOSP.
Click to expand...
Click to collapse
I know that was also said on the version for LP but I was able to use some of the functions of GravityBox like Expanded desktop Mode to hide navigation bar and enable volume keys to kip tracks when listening to music.
Sm0k3d 0uT said:
I know that was also said on the version for LP but I was able to use some of the functions of GravityBox like Expanded desktop Mode to hide navigation bar and enable volume keys to kip tracks when listening to music.
Click to expand...
Click to collapse
Exactly, GravityBox will run, but only some functions works with the stock ROM.
If you want a fully working GravityBox, switch to CM13! (however, roughly half of the features are already implemented in CM13).
guys which version of xposed for KIW-L21 B340?
Just go to xposed on xda lol
Demian3112 said:
Just go to xposed on xda lol
Click to expand...
Click to collapse
If you don't know the answer Just don't reply...useless help...if i would have found in the main thread i wouldn't have asked here...
Inviato dal mio KIW-L21 utilizzando Tapatalk
lucacerio said:
If you don't know the answer Just don't reply...useless help...if i would have found in the main thread i wouldn't have asked here...
Inviato dal mio KIW-L21 utilizzando Tapatalk
Click to expand...
Click to collapse
He meant there's an Xposed forum on XDA. All the info you need is there. He obviously knew the answer but didn't want to hand hold.
http://forum.xda-developers.com/xposed
Arobase40 said:
The answer was already given on post #3 by @mooms and guess what : the title of this thread is "Xposed on the new MM update" and B330/B340 are exactly MM !
Click to expand...
Click to collapse
I've used that file but the phone stucked on Honor logo for 1 hour...so i uninstalled it
Inviato dal mio KIW-L21 utilizzando Tapatalk
Arobase40 said:
You have surely done something wrong as it works perfectly fine !
Maybe you got a corrupted file...
http://dl-xda.xposed.info/framework/sdk23/arm64/
Click to expand...
Click to collapse
Re-downloaded but still not working
Inviato dal mio KIW-L21 utilizzando Tapatalk
Hello. I have tryed to install latest xposed on my b340 but i have a little problem. I cant recieve or start calls when that is installed. Has someone this problem too? How can i solve this problem? Please help me. Thanks
Try v83
miui_MI5Global_8.6.21(Global beta) for MI 5(8.0)
FOR TWRP 8.6.21 – miui_MI5Global_8.6.21_4a47f22a97_8.0: http://bigota.d.miui.com/8.6.21/miui_MI5Global_8.6.21_4a47f22a97_8.0.zip
If you are in miui9 do all the wipes and format data ... restart in twrp and install
Regards
So flash it form twrp 3.2.1.1??
niravnn said:
So flash it form twrp 3.2.1.1??
Click to expand...
Click to collapse
Yes...if you are in miui 9 ... make all the wipes and format data ... reboot in twrp and install
If you want to save your configuration do a backup before installing
vcx77 said:
Yes...if you are in miui 9 ... make all the wipes and format data ... reboot in twrp and install
If you want to save your configuration do a backup before installing
Click to expand...
Click to collapse
I'm on miui 10 China developer rom.. Based on oreo
So if I'm right I only have to do factory reset from twrp and don't have to format data..
Right?
niravnn said:
I'm on miui 10 China developer rom.. Based on oreo
So if I'm right I only have to do factory reset from twrp and don't have to format data..
Right?
Click to expand...
Click to collapse
my advice is to make format data to avoid problems...But it is only my opinion
vcx77 said:
my advice is to make format data to avoid problems...But it is only my opinion
Click to expand...
Click to collapse
Thanks for reply.. Just did factory reset only and Flashed it. And so far so good.. Really smooth and everything seem working as it should
Just one question does this rom have full-screen gesture?
Thanks for sharing it...
niravnn said:
Thanks for reply.. Just did factory reset only and Flashed it. And so far so good.. Really smooth and everything seem working as it should
Just one question does this rom have full-screen gesture?
Thanks for sharing it...
Click to expand...
Click to collapse
I do not know ... I do not have mi5 ... I have mi note 2
niravnn said:
Thanks for reply.. Just did factory reset only and Flashed it. And so far so good.. Really smooth and everything seem working as it should
Just one question does this rom have full-screen gesture?
Thanks for sharing it...
Click to expand...
Click to collapse
No it dosent
You have to edit build.pro
..find "qemu.hw.mainkeys=1" replace 1 with 0 than reboot. After reboot there will be additional option in menu
szabla77 said:
No it dosent
You have to edit build.pro
..find "qemu.hw.mainkeys=1" replace 1 with 0 than reboot. After reboot there will be additional option in menu
Click to expand...
Click to collapse
Thanks for the link, could you please share the fastboot rom link.
Sent from my MI 5 using Tapatalk
treble ready? do you guys check it?
3Dota said:
treble ready? do you guys check it?
Click to expand...
Click to collapse
MI5 won't have official Treble by Xiaomi.
mrnannu said:
Thanks for the link, could you please share the fastboot rom link.
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
I don't think there is a fastboot rom for it... It's supposed to be a closed beta... I might be mistaken though...
Sent from my MI 5 using Tapatalk
Is there any lag with magisk 16.4?
imrananis said:
Is there any lag with magisk 16.4?
Click to expand...
Click to collapse
No.
I always end up with bootloop during first install with this :/
I'm going to try without formatting data now.
EDIT: So stupid. Flashed a stable with miflash and selected "flash and lock". Now I'm stuck for 72h with the China Dev ROM xD
I flashed it and only the firmware got installed. Did I miss something ?
Partha
How to install faceunlock on this rom?
NEW miui_MINote2Global_8.9.13(8.0)MIUI10 Global-Developer for twrp
Multilanguaje
FOR TWRP 8.9.6 – miui_MINote2Global_8.9.13(8.0): http://bigota.d.miui.com/8.9.13/miui_MINote2Global_8.9.13_4cc99774f3_8.0.zip
Regards
Got it via official channel
kmanilpillai said:
Got it via official channel
Click to expand...
Click to collapse
Isn't it shut down yet? That's what i see at least
Andrikkos said:
Isn't it shut down yet? That's what i see at least
Click to expand...
Click to collapse
Yes.. I got it through OTA.
Sorry for the confusion...
also
can get it through:
http://en.miui.com/getrom.php?m=yes
Installed. Works Great . Nothing better than an official stock.
Hi, I have pixel expirience installed and I got erorr when trying install this image wia TWRP:
"Updater process ended with ERROR: 7
Any ideas how to fix this?
Thanks in advance.
You need to flash fastboot rom.. will lose all your data if done.
think so..
kmanilpillai said:
You need to flash fastboot rom.. will lose all your data if done.
think so..
Click to expand...
Click to collapse
I am tried. But got another error. "Length can't be less than zero" From MiFlash.
I think this flash might require another version of firmware than my. What version is needed for this rom?
Good morning friends!
I installed Rom Beta MIUI 10 Global 8.7.5 in TWRP 3.2.2
However, the system does not boot even though I'm formatting with TWRP.
Would there be some other method for ROM to reboot?
kmanilpillai said:
You need to flash fastboot rom.. will lose all your data if done.
think so..
Click to expand...
Click to collapse
do you have any notification sound issues? It doesn't really ring when a notification arrive. And its not on silence..
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
OnlyGreen said:
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
Click to expand...
Click to collapse
MIUI10 yes...Global-Developer
Update From 9.5.4.0..? Nooooooo
Alexurso said:
Good morning friends!
I installed Rom Beta MIUI 10 Global 8.7.5 in TWRP 3.2.2
However, the system does not boot even though I'm formatting with TWRP.
Would there be some other method for ROM to reboot?
Click to expand...
Click to collapse
Can anyone help me with this question?
---------- Post added at 05:42 PM ---------- Previous post was at 05:38 PM ----------
I install MIUI 10, do the procedure by installing TWRP, restart Smatphone via TWRP, install SuperSU, format the System. But when I restart my Smartphone, it does not leave the startup screen
Can I dirty flash it over global stable?
jaran.x said:
Can I dirty flash it over global stable?
Click to expand...
Click to collapse
You will encounter some problems... The recommended way is to clean flash it
Can we flash this with miflash without unlocking bootloader?
NEW miui_MINote2Global_8.7.12(8.0)MIUI10 Download in first post
OnlyGreen said:
Is it MIUI 10 For Xiaomi Redmi Note 2?
Update From 9.5.4.0..?
Click to expand...
Click to collapse
Not REDMI!!
Andrikkos said:
do you have any notification sound issues? It doesn't really ring when a notification arrive. And its not on silence..
Click to expand...
Click to collapse
No issues yet.. so far so good..
vcx77 said:
NEW miui_MINote2Global_8.7.12(8.0)MIUI10 Global-Developer
Multilanguaje
FOR TWRP 8.7.5 – miui_MINote2Global_8.7.12(8.0):
Regards
Click to expand...
Click to collapse
Can anybody help me ?
TWRP return errors,
1) this package is for scorpio devices, this device is " " .
2) twrp no digest file found.
Now Installed MiUI9.5 developer edition.
I found this OnePlus 7 Pro Rom which boots on Mi9 but has some issues. All credits to the creator. Maybe someone can help fixing the issues
https://androidfilehost.com/?a=show&w=files&flid=296331
Forgot to say the ROM is OOS7P_958_V2
How to flash
1. Use new Eu Rom fw+vendor, like 10.7.19
2. Wipe all except internal storage
3. Flash extracted OOS7P image to system
4. Flash Permissiver_v4.zip
What it doesn't work (this what i found)
1. AOD
2. Sounds through speaker are muffled.
3. Finger Print
4. Face unlock
Flashing this ROM at your own responsibility.
Thank you.
Sent from my MI 9 using Tapatalk
Forgot to say the ROM is OOS7P_958_V2. Sorry.
Sent from my MI 9 using Tapatalk
For following ?
https://androidfilehost.com/?fid=6006931924117916784
OOS7P_959_V1
This is really cool. Looking forward to a good functioning port.
Did someone try this?
GIPAQ said:
Forgot to say the ROM is OOS7P_958_V2. Sorry.
Click to expand...
Click to collapse
Ok but from where u found this? Can u share link to those site or Telegram Group if Available?
Found. Its from Redmi Note 7 Pro.
Rajeev said:
Ok but from where u found this? Can u share link to those site or Telegram Group if Available?
Found. Its from Redmi Note 7 Pro.
Click to expand...
Click to collapse
Hi,
Yes, its from Note 7 Pro. I have tried multiple vendors but same issues as in OP persist. The performance of the Rom is amazing.
Maybe someone can produce a patch to resolve those issues. I have also tried global mi 9 vendor files but it boot loops.
Telegram discussion for Note 7: https://t.me/lavendergsi
Sent from my MI 9 using Tapatalk
GIPAQ said:
Hi,
Yes, its from Note 7 Pro. I have tried multiple vendors but same issues as in OP persist. The performance of the Rom is amazing.
Maybe someone can produce a patch to resolve those issues. I have also tried global mi 9 vendor files but it boot loops.
Telegram discussion for Note 7: https://t.me/lavendergsi
Click to expand...
Click to collapse
Did u tried OP7 port.? And i read some fixes for Fingerprint available in https://treble.andro.plus/ here.
Rajeev said:
Did u tried OP7 port.? And i read some fixes for Fingerprint available in https://treble.andro.plus/ here.
Click to expand...
Click to collapse
Which OP7 port are you referring to? I have installed a FP patch but it did not help.
Sent from my MI 9 using Tapatalk
GIPAQ said:
Which OP7 port are you referring to? I have installed a FP patch but it did not help.
Click to expand...
Click to collapse
Its from Redmi Note 7. But i think its also waste..
Rajeev said:
Its from Redmi Note 7. But i think its also waste..
Click to expand...
Click to collapse
I tried that also. Same issues as the 7 Pro rom.
Sent from my MI 9 using Tapatalk
GIPAQ said:
I tried that also. Same issues as the 7 Pro rom.
Click to expand...
Click to collapse
I have stopped all rom flashing and settled in eu rom. No more flashing. Will try if Masik Rom available for Mi9
OP, where did you find this? Curious about new updates..
Hello everyone link to new miui 12:
http://bigota.d.miui.com/20.4.27/miui_RAPHAEL_20.4.27_a29ff932d8_10.0.zip
Just download and flash. Enjoy ?
How to install this on mi 9t pro
Verstuurd vanaf mijn Mi 9T Pro met Tapatalk
ajdin.cekic said:
Hello everyone link to new miui 12:
http://bigota.d.miui.com/20.4.27/miui_RAPHAEL_20.4.27_a29ff932d8_10.0.zip
Just download and flash. Enjoy
Click to expand...
Click to collapse
Have you tried this - any initial opinions or screenshots please?
Dinjesk said:
How to install this on mi 9t pro
Verstuurd vanaf mijn Mi 9T Pro met Tapatalk
Click to expand...
Click to collapse
+1
Thanks
nigol
Bootloop to recovery on my K20 Pro. Flashed dirty over miui.eu.
baggerbodo said:
Bootloop to recovery on my K20 Pro. Flashed dirty over miui.eu.
Click to expand...
Click to collapse
It is likely due to the different vendors. Have you tried formatting data to see if it worked? I am downloading it but it is extremely slow
Cannot activate device. Do I have to be on the beta program?
andrerodrigues86 said:
Cannot activate device. Do I have to be on the beta program?
Click to expand...
Click to collapse
Not sure. What is the error. I just managed to download and would be flashing in a bit
shiwik said:
Not sure. What is the error. I just managed to download and would be flashing in a bit
Click to expand...
Click to collapse
Hope you can. Waiting for feedback! Flashing another ROM for now.
EDIT: I flashed xiaomi.eu latest beta first. Activated device. Reboot, dirty flashed MIUI 12 and wiped data. This time it worked! MIUI 12 looks cool!
Just flashed it. Dirty flash over latest eu beta ends with never ending boot screen. Back to recovery, delete data and rebooted. Everything fine. Booted up and restoring backup. Thanks
Works fine with Magisk 20.4. For me also Candy Kernel on 72hz works fine.
Heiko77 said:
Works fine with Magisk 20.4. For me also Candy Kernel on 72hz works fine.
Click to expand...
Click to collapse
working find for me too
did you use magisk for your 72hz screen ?
Is multilanguage ?
supera3 said:
Is multilanguage ?
Click to expand...
Click to collapse
Only Chinese and English I think.
Heiko77 said:
Works fine with Magisk 20.4. For me also Candy Kernel on 72hz works fine.
Click to expand...
Click to collapse
Wow,man iam waiting for this..haha.. thanks for confirmation...eh, btw I saw some where that miui12 natively support screen refresh rate, u can choose it right in the settings. 60,75,90hz, do u guys find anything like this? Thank you
andrerodrigues86 said:
Only Chinese and English I think.
Click to expand...
Click to collapse
I'm on Global 11.0.3 right now. Can I just format data and flash the .zip via TWRP?
andrerodrigues86 said:
Only Chinese and English I think.
Click to expand...
Click to collapse
i confirm !!! only english and chinese
Catsonvi said:
I'm on Global 11.0.3 right now. Can I just format data and flash the .zip via TWRP?
Click to expand...
Click to collapse
Yes. Should be good. Assuming you would backup your data
afro972 said:
working find for me too
did you use magisk for your 72hz screen ?
Click to expand...
Click to collapse
No, just rename candy kernel zip like candy72hz.zip and flash. It'll install a Magisk Module, too.
Rom is Chinese and English only. But with gapps.