Hi all!
I have a Berry King heartbelt.
Works great with other APPs like Endomondo etc.
But not with the Amazfit app and it also does not connect to the Amazfit Stratos via BT.
Any hints/ideas/suggestions?
I created nearly the same thread with the same topic a few weeks ago [emoji6] got also a heart rate sensor from Berry King and it wouldn't work for me after my first attempts [emoji16]
Solution:
Turn Off phone bluetooth
Pair heart rate Sensor with watch
Turn on phone bluetooth again
Gesendet von meinem G8441 mit Tapatalk
noideaforaname said:
I created nearly the same thread with the same topic a few weeks ago [emoji6] got also a heart rate sensor from Berry King and it wouldn't work for me after my first attempts [emoji16]
Solution:
Turn Off phone bluetooth
Pair heart rate Sensor with watch
Turn on phone bluetooth again
Gesendet von meinem G8441 mit Tapatalk
Click to expand...
Click to collapse
Thanks for that.
But I have already tried the same.
I thought that the BT con to the phone needs to be stopped.
So I did that.
But still no pairing between Stratos and heart belt.
Which firmware do you use?
US 2.3.2.7 official
Did you tried a reboot of the watch after you turned of phone bluetooth?
Gesendet von meinem G8441 mit Tapatalk
noideaforaname said:
US 2.3.2.7 official
Did you tried a reboot of the watch after you turned of phone bluetooth?
Gesendet von meinem G8441 mit Tapatalk
Click to expand...
Click to collapse
Yes a reboot of the watch has been done as well.
Still no pairing.
noideaforaname said:
I created nearly the same thread with the same topic a few weeks ago [emoji6] got also a heart rate sensor from Berry King and it wouldn't work for me after my first attempts [emoji16]
Solution:
Turn Off phone bluetooth
Pair heart rate Sensor with watch
Turn on phone bluetooth again
Gesendet von meinem G8441 mit Tapatalk
Click to expand...
Click to collapse
Hi!
Have you really got it working?
I have send an email to Huami support and they said it is not possible to pair the heart belt to the watch.
Yes, it is working fine.
When i start an activity and take a look in settings and bluetooth devices the heart rate sensor is shown as connected.
Also the heart rate is displayed correct. With the watch only it is always to low while doing an activity. I compared it with my Sigma Rox 10 bicycle computer.
Do you got version 1 or 2 of the heart rate sensor (old or new)? I own the old one (v 1).
Gesendet von meinem G8441 mit Tapatalk
noideaforaname said:
Yes, it is working fine.
Do you got version 1 or 2 of the heart rate sensor (old or new)? I own the old one (v 1).
Gesendet von meinem G8441 mit Tapatalk
Click to expand...
Click to collapse
Oh, that could be a reason.
I need to check.
Do you know how I can check this?
The new one is simply called "Heartbeat 2" " [emoji6]
Gesendet von meinem G8441 mit Tapatalk
My Berry King Heart belt is called Heartbeat 2017.
At least that is what I can read under Model.
On the produc it reads "Berry King Heartrate Sensor"
I think your model is the "Heart Beat 2" which was released 2017, but i am not sure.
I bought mine recently, it costs round about 30 €, Heartbeat 2 is round about 50€.
Gesendet von meinem G8441 mit Tapatalk
noideaforaname said:
I think your model is the "Heart Beat 2" which was released 2017, but i am not sure.
I bought mine recently, it costs round about 30 €, Heartbeat 2 is round about 50€.
Gesendet von meinem G8441 mit Tapatalk
Click to expand...
Click to collapse
Same here
I have checked my purchase order and it was also below 30€.
So I have also the first version.
So this could not be the reason why it works for you but not for me...
Strange!
Mine is still working View attachment 4479891View attachment 4479892
Gesendet von meinem G8441 mit Tapatalk
I have now also updated to US 2.3.2.7 official.
But still no success.
Frustration level is rising....
Don't know why
How do you try to connect?
I choose an activity and then i connect the hr sensor withing the settings options ( activity -> settings -> accessoires ). From the watch menu i couldn't connect to my hr sensor, only to my bt headset.
Gesendet von meinem G8441 mit Tapatalk
Yes!!!!!!!!
Finally...That is exactly the solution.
I have tried to connect via the "normal" Settings => Connections => Bluetooth.
This never worked for me.
But via your instruction, it finally worked.
Big thank you!!!!
Natan73 said:
Yes!!!!!!!!
Finally...That is exactly the solution.
I have tried to connect via the "normal" Settings => Connections => Bluetooth.
This never worked for me.
But via your instruction, it finally worked.
Big thank you!!!!
Click to expand...
Click to collapse
I am glad it finally works as it should [emoji2]
Gesendet von meinem G8441 mit Tapatalk
I have a completely different BT heart belt, and it's working great... but I wanted to ask... did you notice that even when connected to an external BT heart belt device, the heart sensor leds on the Stratos are always on the whole time (during sports activity)? Mine are, and it seems like a waste of battery...
marauderx said:
I have a completely different BT heart belt, and it's working great... but I wanted to ask... did you notice that even when connected to an external BT heart belt device, the heart sensor leds on the Stratos are always on the whole time (during sports activity)? Mine are, and it seems like a waste of battery...
Click to expand...
Click to collapse
Yes, i noticed that too. I try to turn off the watch hr sensor before i use my hr belt. Battery life is better. But i forget about it from time to time
Also turning off automatic upload saves much battery (stats are synced only when you open the amazfit app).
Maybe they include something in the sports app in the future, like when an external hr sensor is connected and an activity ist started, internal hr sensor is turned off by automatic. I think this is possible.
I think it ist possible
Gesendet von meinem G8441 mit Tapatalk
noideaforaname said:
I try to turn off the watch hr sensor before i use my hr belt. Battery life is better. But i forget about it from time to time
Click to expand...
Click to collapse
I didn't know the Hr sensor could be turned off, didn't see any option in the menus... how can I do that?
Related
Hey there,
I've had this Galaxy S2 for 1 and an half year, and I've this problem since I bought it.
When I put my phone on charging, the touchscreen to lag and to become less responsive. I use an original charger, and I'm pretty sure it's a phone problem because with my previous Galaxy S2 the touchscreen worked fine.
Can anyone help me?
Inviato dal mio GT-I9100 utilizzando Tapatalk
The easiest way to track these kind of issues is by looking at an actively generated log to see what happens when you plug the charger.
Sent from my GT-I9100 using Tapatalk
Rapepini said:
Hey there,
I've had this Galaxy S2 for 1 and an half year, and I've this problem since I bought it.
When I put my phone on charging, the touchscreen to lag and to become less responsive. I use an original charger, and I'm pretty sure it's a phone problem because with my previous Galaxy S2 the touchscreen worked fine.
Can anyone help me?
Inviato dal mio GT-I9100 utilizzando Tapatalk
Click to expand...
Click to collapse
adapter issue change it.i had faced it b4
I've had this issue with one charger. Charge the phone from your PC, if the screen acts normally - you have to replace the charger.
Well, I tried another charger (not original) and the touchscreen works better, but still not as on discharging.
Inviato dal mio GT-I9100 utilizzando Tapatalk
Hi there,
it's about a month I have this smart watch .
everything is ok about heart rate measures.
if I am in continuous mode ( i.e run, cycle....) and running on treadmill or cycling indoor, the measures have no sense ( it seems 84 is the preferred one also if I am near to die...).
If I check the heart beat in normal mode ( I mean doing nothing and as a "single shot"), it seems to be ok.
any suggestions ? it seems it suffers electromagnetic fields, it's a theory.
any other has the the same problem ?
bye and thanks
p.s
rom is 1.3.3a
Odesláno z mého MHA-L29 pomocí Tapatalk
gogher said:
Hi there,
it's about a month I have this smart watch .
everything is ok about heart rate measures.
if I am in continuous mode ( i.e run, cycle....) and running on treadmill or cycling indoor, the measures have no sense ( it seems 84 is the preferred one also if I am near to die...).
If I check the heart beat in normal mode ( I mean doing nothing and as a "single shot"), it seems to be ok.
any suggestions ? it seems it suffers electromagnetic fields, it's a theory.
any other has the the same problem ?
bye and thanks
p.s
rom is 1.3.3a
Click to expand...
Click to collapse
i have the same problem, my rom is paceifed 1.2.29
Hello. I have replacemented my phone's screen. Because the original screen cracked and phone got become too hot as if it'd be exploited. But after replacement the screen the battery drains even the phone is completely off.. The draining is like %30-40.. Do you have any advice for this?
I've bought a new battery but the phone service doesn't change it.. They say there is risk the screen may be cracked while pulling it off... :/
N-Gage4ever said:
I've bought a new battery but the phone service doesn't change it.. They say there is risk the screen may be cracked while pulling it off... :/
Click to expand...
Click to collapse
this is true. i broke mine by pulling it off, even though i used a heatgun. next time this wont happen again.
what kind of phone service company can't pull a display safely?
i would expect that a professionel service-technician has no problem pulling a screen off without breaking it.
A.N.Droid said:
this is true. i broke mine by pulling it off, even though i used a heatgun. next time this wont happen again.
what kind of phone service company can't pull a display safely?
i would expect that a professionel service-technician has no problem pulling a screen off without breaking it.
Click to expand...
Click to collapse
Well they simply said there is risk. Because in Turkey there isn't this model officially and if it cracks it's hard to bring a new screen from China..
the screen is cheap and availabe on aliexpress. can be long delivery times from china of course. ordered mine 2 weeks ago for about 20€. I'm sceptical about the quality, will report when it arrived.
Gesendet von meinem Le X820 mit Tapatalk
A.N.Droid said:
the screen is cheap and availabe on aliexpress. can be long delivery times from china of course. ordered mine 2 weeks ago for about 20€. I'm sceptical about the quality, will report when it arrived.
Gesendet von meinem Le X820 mit Tapatalk
Click to expand...
Click to collapse
Hey did your screen arrived? How's its quality?
Greetings! I own a Mate 10 Pro BLA-L29 8.0.0.127 (C432). I am really happy with this device. But there seems to be a problem with my volume in stereo mode. On higher levels it sounds really nice and thick, but when I turn it down it gets noticeably flat at some point. I figured out, that from silent to noticeable "thicker" sound, it needs 5 clicks on the volume up button.
I wonder if this is normal or a bug.
Can anyone confirm this behavior?
mine works fine. cant confirm this bug.
Mate 10 Pro. BLA-L29 8.0.0.127 (c432)
AlexxAnders said:
Greetings! I own a Mate 10 Pro. I am really happy with this device. But I have a problem with my volume in stereo mode. On higher level it sounds really nice and thick, but when I turn it down it gets noticeably flat at some point. I figured out, that from silent to noticeable "thicker" sound, it needs 5 clicks on the volume up button.
I wonder if this is a feature or a bug.
Can anyone confirm this behavior?
Click to expand...
Click to collapse
Can confirm this on two Mate 10 Pro BLA_L09 127 (C432) and BLA_L29 127 (C432)
Edit: Will do a wipe the next days and show, if the problems (including not working apps) go away and sent an answer.
Psych Engel said:
Can confirm this on two Mate 10 Pro BLA_L09 127 (C432) and BLA_L29 127 (C432)
Edit: Will do a wipe the next days and show, if the problems (including not working apps) go away and sent an answer.
Click to expand...
Click to collapse
That's exactly what I wanted to do - a factory reset.
But you got 2 Mates with the same issues... so it could be a bug - or normal
EGOiST1991 said:
mine works fine. cant confirm this bug.
Mate 10 Pro. BLA-L29 8.0.0.127 (c432)
Click to expand...
Click to collapse
Are you sure?
AlexxAnders said:
Are you sure?
Click to expand...
Click to collapse
Maybe my english is too bad, so i repeat in german since you are from germany too.
Du sagtest doch wenn du Stereo an hast (Ohrmuschel und Boxen) und du hoerst dadrueber zB. Musik - machen die ersten 5 Klicks nicht wirklich was an deiner Lautstaerke, richtig?
EGOiST1991 said:
Maybe my english is too bad, so i repeat in german since you are from germany too.
Du sagtest doch wenn du Stereo an hast (Ohrmuschel und Boxen) und du hoerst dadrueber zB. Musik - machen die ersten 5 Klicks nicht wirklich was an deiner Lautstaerke, richtig?
Click to expand...
Click to collapse
Grüß dich! Fast richtig... Ich meinte, dass im Stereo mode mit dem 5. Klick der Sound hörbar mehr Tiefe bekommt. Darunter schaltet sich der "Bass" ab. Ist wie wenn du's ganz laut machst. Da schaltet er auch hörbar ab.
Sorry guys. my bad. yes i notice a difference at the 5th click. Im not sure if its really the "bass" but its gets clearer and louder at the 5th click.
but only when you care for it you will notice.
but yap. same here!
AlexxAnders said:
Greetings! I own a Mate 10 Pro BLA-L29 8.0.0.127 (C432). I am really happy with this device. But there seems to be a problem with my volume in stereo mode. On higher levels it sounds really nice and thick, but when I turn it down it gets noticeably flat at some point. I figured out, that from silent to noticeable "thicker" sound, it needs 5 clicks on the volume up button.
I wonder if this is normal or a bug.
Can anyone confirm this behavior?
Click to expand...
Click to collapse
AlexxAnders said:
Grüß dich! Fast richtig... Ich meinte, dass im Stereo mode mit dem 5. Klick der Sound hörbar mehr Tiefe bekommt. Darunter schaltet sich der "Bass" ab. Ist wie wenn du's ganz laut machst. Da schaltet er auch hörbar ab.
Click to expand...
Click to collapse
Exactly this is happening, even on full volume...
Ist genauso wie du sagst, auch bei voller Lautstärke, ist mir aber erst jetzt beim testen aufgefallen
At high volume I can understand that they lower the bass to protect the speaker.
But at low level it makes no sense and is just stupid. I hope they change it with the next firmware.
There are quite a few issues with the stereo mode at all...
AlexxAnders said:
At high volume I can understand that they lower the bass to protect the speaker.
But at low level it makes no sense and is just stupid. I hope they change it with the next firmware.
There are quite a few issues with the stereo mode at all...
Click to expand...
Click to collapse
I'm not so sure. This problem was on firmware 115 and any higher one to, so.... Also stereo in portrait mode would be nice, because the sound is crap.
Psych Engel said:
I'm not so sure. This problem was on firmware 115 and any higher one to, so.... Also stereo in portrait mode would be nice, because the sound is crap.
Click to expand...
Click to collapse
Na das macht Hoffnung
Yeah, you're right. Stereo sound in portrait mode would kill it
At the last volume step i get a serious boost at level and quality to.
POWER1FM said:
At the last volume step i get a serious boost at level and quality to.
Click to expand...
Click to collapse
Yeah, it boosts up but cancels the depths.
I got the same issue, but i think it's made on purpose even though I'm not sure if the phone did it also with the older firmware. Anyway the point is that when you turn your device in landscape mode the other stereo speaker on the left (the one you use to listen to the phone calls) should turn on, but i think that with this bug it simply didn't unless you set your volume over a certain threshold which corresponds to about 5 volume steps.
This is what gives you the idea of a ****ty sound, basically under volume up to 5 the phone is using only one speaker.
Inviato dal mio BLA-L29 utilizzando Tapatalk
I have another question. I understand that we have 2 speakers, one at the top and another at the bottom. Are they supposed to produce the same level of sound?the bottom speaker is loud but the one at the top seems to have a very low output in comparison (checked this by covering the bottom speaker with my finger.). Is this normal or is my top speaker broke. BTW i have a mate 10 pro. I only noticed it because i saw the landscape stereo option and decided to check.
Thanatos0785 said:
I have another question. I understand that we have 2 speakers, one at the top and another at the bottom. Are they supposed to produce the same level of sound?the bottom speaker is loud but the one at the top seems to have a very low output in comparison (checked this by covering the bottom speaker with my finger.). Is this normal or is my top speaker broke. BTW i have a mate 10 pro. I only noticed it because i saw the landscape stereo option and decided to check.
Click to expand...
Click to collapse
The top speaker is not a proper speaker. It's the ear piece. It will never produce the same volume and quality of sound as the bottom speaker. It is not broken. It is normal.
tboy2000 said:
The top speaker is not a proper speaker. It's the ear piece. It will never product the same volume and quality of sound as the bottom speaker. It is not broken. It is normal.
Click to expand...
Click to collapse
Yes exactly. Furthermore you've to take into account that the bottom ones is lateral and the top one points directly towards you so you have to compensate with different volume levels in order to have the same perception. that's why i also suppose the top one is shout down under a certain threshold, i guess it can't manage too lows volume levels, you simply wouldn't ear it, since you've to be also lower than the audio fired from the bottom speaker.
Inviato dal mio BLA-L29 utilizzando Tapatalk
Wenn ihr den Bildschirm ausschaltet beim Musik hören dreht sich die App automatisch wieder auf hochkant und somit is dann auch der gute Sound weg
I am experiencing the same, think this is on purpose though. Probably can only enter the detailed sound mode when there is enough power. Whatever i dont listen music on this anyway... for occasional Youtube/netflix its good enough.
In my opinion this Huawei has a very low volume ... Is there any way to increase the maximum volume?
Thanks
Inviato dal mio LYA-L29 utilizzando Tapatalk
paolosnz said:
In my opinion this Huawei has a very low volume ... Is there any way to increase the maximum volume?
Thanks
Inviato dal mio LYA-L29 utilizzando Tapatalk
Click to expand...
Click to collapse
Install a volume booster which lets you increase the overall volume. Just be careful not to go overboard as you can destroy your speakers.
https://play.google.com/store/apps/details?id=com.goodev.volume.booster
paolosnz said:
In my opinion this Huawei has a very low volume ... Is there any way to increase the maximum volume?
Thanks
Inviato dal mio LYA-L29 utilizzando Tapatalk
Click to expand...
Click to collapse
What volume? The earpiece volume is a tad low, but the phone speakers are about as loud as they come. Pixel 3 10/10, Note 9 9.5/10, Mate 20 Pro 9/10.
Jonathan-H said:
What volume? The earpiece volume is a tad low, but the phone speakers are about as loud as they come. Pixel 3 10/10, Note 9 9.5/10, Mate 20 Pro 9/10.
Click to expand...
Click to collapse
the general sound In my opinion it is low especially in the Bluetooth output. in the other models when you turn up the volume at most you can visualize the warning that can damage your health but allows you to raise further. on the mate 20 pro there is no such possibility
I find those apps useless . The best and only way is to change the build prop. Let's hope for root one-day
This one is working fine on my LYA-L29 since months.
https://play.google.com/store/apps/details?id=com.goodev.volume.booster
Feel free to join us
https://t.me/HuaweiMate20ProInternational
Greetings Tyler
Gesendet von meinem LYA-L29 mit Tapatalk
@paolosnz Keep in mind that unlike other phones, the Mate 20 pro has separate controls for BT : one on device and the phone one. They are not synced as they are on my old Samsung or iPad. Maybe that is also part of the problem...but even with both controls at maximum I don't get the same level as on other phones. Loud enough for normal listening, but not deafening.
Im coming from P20 pro to Note 9 and now on Mate 20 Pro and i think that Mate 20 Pro has the worse quality sound and lower sound from my latest phones...
Another issue that hasn't been mention is the sound of notifications that for several apps like Facebook messanger, Viber the notification sound pays much more lower from what it really is...For an example if i set a generic notification sound and select that sound for Facebook & Facebook messanger then it plays for Facebook at level 10 & for Facebook messanger at level 4 the same ringtone (mp3)
Has anyone experienced the same situation?
Yeah mate 20 pro has really low sound. I have my pixel 2 xl here and I tried to play the same youtube video on both at the same time, and with the mate 20p on full volume I have to go down to maybe 60% volume on the pixel 2 xl to match it.
The volume in the earpiece is way to low...I have trouble understanding people when I make phone calls in noisy environments. In fact its is so bad that it makes this phone unusable while at work - I work at the airport on the ramp. Looking for a solution...
solution is to gather feedback before you make a bad purchase like this , lesson learned?
Use a Bluetooth headset
Sent from my HUAWEI LYA-L09 using XDA Labs
vandal4e said:
solution is to gather feedback before you make a bad purchase like this , lesson learned?
Click to expand...
Click to collapse
I did read a lot before buying this phone... and in the mean time my issue has been solved.
And just to be very clear, I don't need a comment like "lesson learned" that does not help at all. You got the message?
yeah attitude helps keep it up and throw your money however you like, don't come crying afterwards in developers forums
cfds said:
I did read a lot before buying this phone... and in the mean time my issue has been solved.
And just to be very clear, I don't need a comment like "lesson learned" that does not help at all. You got the message?
Click to expand...
Click to collapse
What did you do to solve the issue?
Sent from LYA LYA Ya Bums on Fire
vandal4e said:
yeah attitude helps keep it up and throw your money however you like, don't come crying afterwards in developers forums
Click to expand...
Click to collapse
Wondering who's got the attitude here...I just looked for solutions on these forums like I do since 2006.
And about trowing money...just shut up as you don't know jack #*$"
the salt is real with you all knowing one.. keep swearing your ban can't be far away
P.S - enjoy your low sound
fixed
My wife's mate 20 pro have similar low volume issue with her bluetooth headset and I did this to resolve the issue.
You are going to need to change the Bluethooth audio codec in the "developer options"
I can't link because I am a new user but if you search for it on the internet you should be able to find information on how to do that
I believe you'll need your bluetooth headset connected before you can make any changes otherwise the option to change will be greyed out.
Basically I changed the Bluetooth Audio codec from ACC (which seems to be the default) to SBC. After this, the max volume dramatically improved.
For some reason, options like
Bluetooth Audio Sample Range, Bluetooth Audio Bits Per sample, Bluetooth Audio Channel Mode, Bluetooth Audio LDAC Codec are greyed out even when the bluetooth headset is connected while I checked on another android phone that these are options you can actually play with.
I wanted to change these to see if it'll actually improve bluetooth audio. Either way, I'm happy that changing this works. Let me know if it help for you guys as well?
cfds said:
The volume in the earpiece is way to low...I have trouble understanding people when I make phone calls in noisy environments. In fact its is so bad that it makes this phone unusable while at work - I work at the airport on the ramp. Looking for a solution...
Click to expand...
Click to collapse
Same with me... That's why I disassamble the phone and remove the earpiece cover. And now, my earpiece sound so loud.
---------- Post added at 12:26 ---------- Previous post was at 12:23 ----------
TylerDurben said:
This one is working fine on my LYA-L29 since months.
https://play.google.com/store/apps/details?id=com.goodev.volume.booster
Feel free to join us
https://t.me/HuaweiMate20ProInternational
Greetings Tyler
Gesendet von meinem LYA-L29 mit Tapatalk
Click to expand...
Click to collapse
I've tried this app to increase earpiece sound but no luck. I had to remove the earpiece cover than sound is so loud now. I think this not software problem but earpiece cover.
The overall volume of the phone is surprisingly weak, all the more so when you have it plugged in...
You guys that are dismantling ****, I don't need to tell you that you are likely killing the submersible ability of the phone - right?