Hello and good afternoon everyone
I am quite new to the whole rooting thing and i really hope i don't annoy anyone with my silly questions.I tried searching anything related to my problem and i tried to understand many new terms but in the end i concluded that it would be best to get a direct answer for my problem.So here i am...
A friend of mine gave me a Samsung Galaxy s4 mini(GT-9195) with the problem of bootlooping.So after Samsung KIES programs & Samsung Smart Switch Recovery Tool failed to recognise it,people told me that ODIN will do the trick.And so i downloaded the necessary firmware for my device and because the specific carrier wasn't on the list i just decided to put the (EUR) one.And it worked!ODIN reported SUCCESS.The device actually booted with the first try on the First Setup Screen.So i get it set up and i give it back to the user.But after two days it started doing the same stuff.The user ended up getting another phone but after 2-3 months he gave it to me again so i can fix it.I thought that it would be a simple problem and the phone would probably have a bad battery which couldnt give enough "juice" for the phone to actually boot.Well i found out that the phone now not only doesn't bootloop..it doesn't power on or vibrate whatsoever.It was completely dead till i connected on the PC and i actually heard a sound of connection from the Computer.So i go to devices to find a device named Qualcomm HS-USB QDLoader 9008(COM 6).So my question is.Based on what i read i probably installed a non compatible ROM and i hard bricked the device.Something like that.So could someone PLEASE help me unbrick this thing IF indeed we are talking about a hard brick right now.Really sorry if someone has already made a topic on this.But i cannot find a solution no matter how much i try.Thanks in advance!
Related
Okay, So I am as NOOB as NOOB can be,
I got a used SGS2 (Bell/Virgin), I am on Telus so I figured, how hard can it be to unlock it instead of paying some dude to do it for me? (First mistake, and have been humbled every step of the way since!...)
Anyway I will try to keep this relatively short (it will be difficult)... ...I read a few things online and saw that I needed ODIN and a Rooting software, I originally used SuperOneClick, and to download the right insecure kernel to match my original one etc... ...problem is I obviously didn't read nearly enough when I started because I was almost done and then there was a hiccup when SuperOneClick said that I needed to enable SU in Kies. So I decided to go into Kies to try and do so but the instructions before I started Rooting said to put the phone in USB debugging mode. Apparently Kies doesn't see the phone if it is in that mode. Well by this time I can't get past the logo screen and this is where my downward spiral begins.
I then tried to unroot the phone to go back to stock but didn't really know what I was doing and then I read something about the cache needing to be wiped and then after that I read that maybe my OS was wiped. So at this point I did lots of reading (what I should have done in the first place) and most of anything useful I found was on XDA so that is why I am here. It seemed like yes, in fact my OS was wiped because of one of my not so S-M-R-T actions. So I fumbled through and found the right OS for my S2 and I had ODIN going strong and I had the OS loading, the green bar getting bigger in ODIN and the blue bar working it's way across the screen of my S2...I thought "finally!!, I rock!!"... ...then for some reason everything stopped! I had seen in a post that I had to uninstall Kies before doing anything, which I did...but I didn't see until after the fact that my anti-virus likely interfered (I didn't disable it for the process before I started).
At that point of course I was left with a phone that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
So then I was afraid to try anything else because many say to steer clear of Kies and also I had read that I may need a USB jig to be able to get it back into download mode because all I was getting was the "firmware upgrade issue" screen. I did make a USB jig with a resistance of 300K Ohms and I *can* get the phone into download mode. (Though another concern is that when I plug the USB jig in and it brings the phone into download mode, the counter is not reset and I read that that was supposed to be reset by the jig.)
So last night I got brave and decided to try and run ODIN and to have another attempt at installation of OS. Now I can get ODIN to detect the phone, but I put the I9100MUGLD3_I9100MBMCLD3_I9100MXXLD3_HOME.tar.md5 file into the PDA section of ODIN and it starts and gets to the part where it says loading firmware or something and then bootload.bin and it stayed like that for like, an hour and then I gave up, fearing that I am just going to screw it up even more.
So now I decided that I am not even close to knowing what to do next but every time I found anything to move forward it was on this site so I figured I may as well join the site since I have been here so often. Now I am hoping for some kind of miracle...so, in advance, please please please and thank you thank you thank you all for your input. (Sorry for the length of this I just wanted to get all the info I could into this)
Its quite a long story and didnt bother reading it.
If you can still access your phone via odin at downloadmode. Flash a stock firmware for your device and it should fix if it is just a soft brick.
Sent from my GT-I9100 using Tapatalk
UnwiredDroid said:
Its quite a long story and didnt bother reading it.
If you can still access your phone via odin at downloadmode. Flash a stock firmware for your device and it should fix if it is just a soft brick.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Sorry for the length of the story, I thought there may be alot of useful info mixed in with the useless info... ...when you say use stock firmware do you mean the kernel or the actual OS? I tried loading ICS onto it (which I thought was stock but I may be wrong). Is it supposed to be gingerbread or something else? Also where would I find a good file for it.
Thank you again for any input, very much appreciated!
Hey ,
I also have a Virgin Samsung S2 i9100 and the first time I tried rooting it, it got stuck on the screen with the yellow triangle and wouldnt move at all. I believe it was bricked?
anyways, I m not sure I totally understand your situation, but I solved my problem using this thread
http://forum.xda-developers.com/showthread.php?p=21493413
look it under the i9100M section. hope this helps
schtiven said:
Hey ,
I also have a Virgin Samsung S2 i9100 and the first time I tried rooting it, it got stuck on the screen with the yellow triangle and wouldnt move at all. I believe it was bricked?
anyways, I m not sure I totally understand your situation, but I solved my problem using this thread
http://forum.xda-developers.com/showthread.php?p=21493413
look it under the i9100M section. hope this helps
Click to expand...
Click to collapse
Thank you all so much for your help, I could not get it to work after several tries, I even tried three or 4 different USB cables and ports on my PC and still no. I read on another thread that one person tried another PC and it worked so I tried my friend's laptop and it worked!...my SGS2 boots up and all that now! Very very happy thank you all.
I have a SGH-I747M 4.1.1 Galaxy S3.
I used the Unified Toolkit and rooted/installed CWM, backuped and ready for a new ROM.
As I was installing this custom ROM (Pardus HD), and error popped up and it was aborted, (still in the CWM main menu)
but having only the said custom ROM zip file in the internal memory,
I figured I just shut down and download a fresh copy of the ROM.
and put it in an external SD card then power on the phone back into recovery.
Only thing is it wont power on anymore, the screen is just black, plugging in USB and computer just makes connected/disconnected noise.
(Devices say its "Qualcomm HS-USB DQLoader 9008")
Also tried taking out putting in the battery.
(I know my mistake is I never re-installed the backup) I've run out of ideas, please help.
I have a very similar problem. I had my battery checked thinking that could be the problem. My battery shows that is no good. I tried a new one and still nothing. I can't help but think if it were a missing program it would still come on at least. Lucky for me its covered under insurance. I'd still like to know what happened and if I could fix it.
I'd like to know too if I could fix it myself, other than ''the jig'' or a repair service. currenty trying to revive it still
edit: currently trying this Heimdall thing, goodluck to me...
Have you checked the battery? If I wasn't sending mine back on an insurance claim I would take it apart. I have a Motorola that has a fuse next to the battery under the back of the case. Seems dumb, I know but how could changing the rom "short" out my battery. Dumb again I always thought bricking was only being able to bring up recovery.
I think the battery is fine, as CWM was still running after the error.
That's pretty much what happened to me. Maybe we got to the same problem 2 different ways. Hope you get it figured out.
THIS IS GT-I9300 SECTION..
c'mon there was an stickie on top of this section for you..
HERE.. http://forum.xda-developers.com/forumdisplay.php?f=1705
Your problem is that you flashed a rom for gt-i9300 (International) and you have some U.S. variant of s3. That in most cases bricks the phone.
Probably time for a service center visit.
Hi everyone,
I'm sorry if ever I'm posting this on the wrong section cause I'm not sure if this is a problem from android or samsung.
I'm not good at all when it comes to phone troubleshooting so I will try my luck and ask questions about what have happened to my phone just awhile ago. I got this phone from Japan(Samsung Galaxy SII Wimax isw11sc) months ago and I only use it for multimedia purposes as it is region locked and I am at another country atm. everything is running fine until my phone asked for a software update(not really sure what upgrade that was) and I decided to give it a shot and let it download the updates. I left it to do some chores and when I came back to check on it, it reboot looped itself on the AU(mobile phone company from japan) logo.
I did some research and found some things like hard reset and download mode. I tried to do the hard reset(power/home/volume up) method but I can't seem to access the settings instead, the phone keeps on showing me this "Preparing for S/W update. Please wait." after a few seconds, the phone will reset itself back to the reboot loop.
I tried to do the download mode using odin mode but then, I realized that my phone and computer won' connect via USB port because well, my phone won't boot. Also downloaded the manual driver but my pc won't recognize it.(win7 if that helps.)
Please tell me what have happened and what I can do to fix this problem, I don't really care if i lose everything that I have stored on my phone, I just want it to work again. Help will be much appreciated, Thank you.
can you please help me with a soft unbricking of my lg g vista (vs880 [11b]) from verizon usa? i found the 880-11b firmware file, at least i think its the right one. if you know of/ come across this and are sure of its validity i would trust that more. i found and downloaded via a google search. i initially think i may have accidentally deleted the splash pic for the carrier when it boots. this caused it to just black screen after the lg logo n the backlight would flash like it was stuck in a boot loop just the image file was missing. after a little more research i figured out how to put it in the download mode so that i can use a pc to try repair or reinstall whatever it needs. i am unsure if i need the sdk or adk toolkits for a repair in the download mode to work. while on that screen it says its plugged in and waiting to download firmware via usb under the progress bar it tells me not to unplug until download is completed. its not showing up in "my computer" however. and i've never had to do s software/firmware download or setup when the phone wasn't in full normal working order. i simply want to put back the out of the box software back in place. firmware 88011b and 4.4.2 os. just want to be sure i get the proper files/and or programs/ directions to use those resources properly the last thing i want is to guess at something that i could ask someone more experienced for help with and end up bricking it beyond repair. any and all help is very appreciated and i must ask you to please explain each step as clearly and "dumbed down" as possible as you can. if i need to use a program i've never used before {i.e. i hear things like odin mentioned in the forums but i don't understand or have any experience with any pc to phone applications so the more detailed any instructions can be made the better. anything that most ppl who have started tinkering with their devices usually know as common sense or steps that seem implied if not specifically mentioned i'll miss. i have been reading n lurking for months n managed to root the device. but had another issue i accidentally caused soon after which resulted in a factory wipe and some time to remember what i did that rooted it after spending a day on it the first time n trying many things it took me a while to refind what i had done that worked. then this happened. i'm sure with the proper files/tools it'll be fine but i need help to know what those are and to be sure i do it right the first time. i know if i don't there may not be a second chance. thank you again in advance for your patience and help.
About a month ago I bricked a phone, Just 5 spacer, somewhat a Lenovo s660 clone
I had a backup, just5 spacer2 (mtk mt6582) which is broken now as well, beyond repairs, at least in the country I'm visiting(the local repair shop gave me a weird look and said chinese phones are too much of a mess to deal with).
not willing to buy a new one I've been trying to fix up the first one.
So I've been reading threads, and everything here http://forum.xda-developers.com/showthread.php?t=1943442&page=1 and have already noticed that I'm not the only one getting an error
s_brom_download_da_failed(2004) followed by explanation that the power is being interrupted.
the brick is complete and I'm attempting to get preloader on it,(previous attempts got me this far) I've been trying to mess with testpoints but to no avail (kcolo with gnd). volume up &down or any button combination gives no result. I cant provide any pictures of it but I'll try adding some later.
can anyone give me an advice on how to fix this?
as the thread topic suggests it's an MTK MT6582M(not the usual without m, because I already own one without m and it's completely different)
Thank you in advance.