Hi all.
Following problem: TWRP crashed while installing latest Oreo 8.1 (aicp_scorpion_windy_o-13.1-UNOFFICIAL-20180623)
Symptoms now:
- no system
- no recovery available
- stops in Sony boot screen
- only flash mode available
If I try to flash a tft file, flashtool response is "The bundle does not match the connected device"
Any ideas? Or have I a total brick?
Log:
1/050/2018 13:50:36 - INFO - (S1Flasher.java:986) - Phone ready for flashmode operations.
01/050/2018 13:50:36 - INFO - (S1Flasher.java:410) - Opening TA partition 2
01/050/2018 13:50:37 - INFO - (S1Flasher.java:561) - Current device : Unknown: Jul 24 2016/19:29:50 - CB5A22LRPR - Unknown: Jul 24 2016/19:29:50 - Unknown: Jul 24 2016/19:29:50 - GENERIC_23.5.A.1.291
01/050/2018 13:50:37 - INFO - (S1Flasher.java:419) - Closing TA partition
01/050/2018 13:50:37 - ERROR - (S1Flasher.java:990) - The bundle does not match the connected device
01/050/2018 13:50:37 - INFO - (S1Flasher.java:899) - Ending flash session
01/050/2018 13:50:38 - INFO - (MainSWT.java:159) - Device disconnected
01/050/2018 13:50:43 - INFO - (MainSWT.java:163) - Device connected in flash mode
Addition: if I plugin the charger, I see the AICP charging logo... battery charging seems to work.
Problem solved. After 50+ attempts I got fastboot mode at the phone and flashed it again. Seems to be a timing problem while pressing the tablet keys....
dagolard said:
Problem solved. After 50+ attempts I got fastboot mode at the phone and flashed it again. Seems to be a timing problem while pressing the tablet keys....
Click to expand...
Click to collapse
please detail all the steps you used as i am also attempting similar.
I still tried the startup key combination... it's probably a question of timing, pressing the volume button while starting the device.
harpanhalli said:
please detail all the steps you used as i am also attempting similar.
Click to expand...
Click to collapse
I used this solution to get out of the very same situation on my SGP611. I had tried to flash ICP onto LineageOS and got into the same pickle you're facing, but flashing a stock rom combined with the reset button helped.
To turn off your tablet which is keep restarting, press and hold POWER and VOLUME UP until the tablet vibrates 3 times and turns off.
On your PC open Sony Xperia Companion, click Software repair, check My device cannot be detected or started, Next, chose Xperia phone or tablet, Next, check I know my Google credentials, wait until instruction are displayed how to connect to your PC.
Make sure your tablet is turned off, press and VOLUME DOWN while connecting the USB cable to PC, when the program starts the next step you can release the VOLUME DOWN.
Now wait and do not disconnect the tablet from PC.
Related
Well, the question is that, this afternoon i was recovering mi x10i when suddenly all the city have a blackout and I lost all the repair progress, well, my surprise is when i try to re-repair the phone, the SEUS doesn't update the phone, giving me a error like this when i try to restore:
only copy the url of the images to view it on a new tab:
The error of the updating
img59.imageshack.us/img59/102/capturaqx.jpg
and this image appear when i click cancel.
img59.imageshack.us/img59/102/capturaqx.jpg
I don't know how to do it, but the computer detect the SEMC Flash device and now i'm lost, becouse when i plugged the phone to the charger, the x10 automatically enter on flash mode, now i'm stucked
I give you a picture of the driver that is recognized.
imageshack.us/photo/my-images/405/captura2b.jpg/
Thanks for your help
EDIT: I recive a flasing error when I try to flash with the Flashtool and this rom "X10i_3.0.1.G.0.75_1241-1846.ftf" i get this messsages.
30/054/2011 20:54:41 - INFO - <- This level is successfully initialized
30/055/2011 20:55:31 - INFO - Preparing files for flashing
30/055/2011 20:55:34 - INFO - Searching Xperia....
30/055/2011 20:55:41 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&766E368&0&1
30/055/2011 20:55:41 - INFO - Start Flashing
30/055/2011 20:55:41 - INFO - VER="R8A031";DATE="20100707";TIME="11:32:00";
30/055/2011 20:55:41 - INFO - Flashing loader
30/055/2011 20:55:42 - ERROR - Error flashing. Aborted
30/055/2011 20:55:42 - INFO - Now unplug the device and power it on
30/055/2011 20:55:42 - INFO - Then go to application settings
30/055/2011 20:55:42 - INFO - turn on Unknown Sources and Debugging
Click to expand...
Click to collapse
Well, the most silly thing is that I can't turn on Unknown Sources, because the device only vibrates and never boots up, and if I plug the x10 via usb on the charger or the PC, automatically he bot's up on flash mode, or so it seems, because the green led boots ups. I think that I've the first person that bricked the x10i
i think u hav the same problem. maybe this will help
http://forum.xda-developers.com/showthread.php?t=1190540
blmn1337 said:
i think u hav the same problem. maybe this will help
http://forum.xda-developers.com/showthread.php?t=1190540
Click to expand...
Click to collapse
I still stucked
new info added on the post.
I think you'll have to get it repaired by Sony
I followed these steps
(1) Install .71 Baseband (link) with newest Flashtool (link) - you may use another baseband at your own risk but there is no support, we only test (because we only have) on Baseband 2.1.71 X10i
(2) After Flashtool says "Disconnected" then "Reconnected in Flash Mode", REMOVE CORD and BATTERY and wait ten seconds!
Click to expand...
Click to collapse
of this guide
after that, when i turn it on it shows the white SE logo and turns off, then turns on and then all over again...
any ideas?)
i used Baseband 2.1.71 and Flastool 0.7.1.0
xperia x10i android 2.1
SE logo? You're on the wrong kernel I think. Take a look at step 3 and Flash the M&M team kCernel
when i connect it to pc it starts showing logo and rebooting
ashley_ said:
when i connect it to pc it starts showing logo and rebooting
Click to expand...
Click to collapse
I think that you have rpoblems with getting into flash mode, tri it with different was, prepare everything as decribed before and do notconnect the phone to computer and wait for dialog which is waiting to connect phone with animation and steps how to it.
Do NOT connect phone to PC. Take out battery, put it back. COnnect usb cable to the phone, not second part of cable to PC. Press the Back button and hold it. Then push power on (back button still on hold), green diode will blink for a while. Then you can connect phone to PC and it will enable flash phone flawlessly.
hjoray, it conects in flashmode!)
but something went wrong...when everything is finished, phone should reboot but it simply stays off
heres the log:
Code:
15/035/2012 21:35:26 - INFO - <- This level is successfully initialized
15/035/2012 21:35:26 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
15/035/2012 21:35:26 - INFO - You can drag and drop ftf files here to start flashing them
15/035/2012 21:35:31 - INFO - Device disconnected
15/036/2012 21:36:34 - INFO - Selected X10i_2.1.71_ARO.ftf
15/036/2012 21:36:34 - INFO - Preparing files for flashing
15/036/2012 21:36:46 - INFO - Please connect your device into flashmode.
15/038/2012 21:38:12 - INFO - Device connected with USB debugging off
15/038/2012 21:38:12 - INFO - For 2011 devices line, be sure you are not in MTP mode
15/038/2012 21:38:30 - INFO - Device disconnected
15/039/2012 21:39:30 - INFO - Device connected in flash mode
15/039/2012 21:39:30 - INFO - Opening device for R/W
15/039/2012 21:39:30 - INFO - Reading device information
15/039/2012 21:39:30 - INFO - Phone ready for flashmode operations.
15/039/2012 21:39:30 - INFO - Start Flashing
15/039/2012 21:39:30 - INFO - Flashing loader
15/039/2012 21:39:32 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE / IMEI : 01237900113664
15/039/2012 21:39:33 - INFO - Flashing kernel.sin
15/039/2012 21:39:35 - INFO - Flashing fota1.sin
15/039/2012 21:39:36 - INFO - Flashing fota0.sin
15/039/2012 21:39:37 - INFO - Flashing amss_fs.sin
15/039/2012 21:39:37 - INFO - Flashing dsp1.sin
15/039/2012 21:39:45 - INFO - Flashing amss.sin
15/039/2012 21:39:56 - INFO - Flashing cache.sin
15/039/2012 21:39:57 - INFO - Ending flash session
15/039/2012 21:39:57 - INFO - Flashing finished.
15/039/2012 21:39:57 - INFO - Please wait. Phone will reboot
15/039/2012 21:39:57 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
15/039/2012 21:39:57 - INFO - Device connected in flash mode
15/042/2012 21:42:53 - INFO - Flash canceled[HTML][HTML][/HTML][/HTML]
SOmetimes it happens,no worry
Disconnect phone from computer and turn it on normally. If geen diode will blink, then pull out battery and put back and try to turn it on once again. It will solve it surely
when i turn it on it only shows white se logo then turns off and red led blinks 3 times
and every time it makes some crackly sound before turning off
ashley_ said:
when i turn it on it only shows white se logo then turns off and red led blinks 3 times
and every time it makes some crackly sound before turning off
Click to expand...
Click to collapse
Hmm, this doesnt looks good - i think that you will need to reflash the complete ROM now.
ashley_ said:
when i turn it on it only shows white se logo then turns off and red led blinks 3 times
and every time it makes some crackly sound before turning off
Click to expand...
Click to collapse
How do you get SE logo with unlocked bootloader? I didn't get that. Maybe your bootloader is locked?
HeliumX10,
which rom shall i use?
LzVebz,
maybe
how can i check it?
LzVebz said:
How do you get SE logo with unlocked bootloader? I didn't get that. Maybe your bootloader is locked?
Click to expand...
Click to collapse
He didnt told that he has an unlocked bootloader, soI expet that his bootloader is locked.
ashley_ said:
HeliumX10,
which rom shall i use?
Click to expand...
Click to collapse
Try this one, its the generic 2.3.3 bundle:
http://www.multiupload.com/JEXUAHAZTL
After this you can install whatever rom from xrecovery.
the link is broken(
and all the other links i found are the same...
any other suggestions?)
ashley_ said:
the link is broken(
and all the other links i found are the same...
any other suggestions?)
Click to expand...
Click to collapse
Found a valid link for you:
http://www.2shared.com/file/h1kNxDVv/X10i_301G075_GLOBAL-GGL_GENERI.html
thanks for the link)
tried this rom but it all repeted...does not reboot when flashing finished, logo -> off -> blinking red led
ashley_ said:
thanks for the link)
tried this rom but it all repeted...does not reboot when flashing finished, logo -> off -> blinking red led
Click to expand...
Click to collapse
Hmm,really strange. I am afraid that there is a hardware issue which needs repair.
Try the last thing - take battery out and leave phone without battery for about one hour. Then try to power it on.
I will also look into service manual what does triple red led blink means.
EDIT:
Found a note in folder with my service manuals - this is the "soft brick"
If the flashing stock ftf before finished without problems, then put your phone on the chrager and leave it charging wor a few hours. It will start up itselfs.
charged it but it didnt start up
now phone behaves as in the 1st post, the only thing changed - now after se logo it shows animated splash screen for less a second
and this weird sound it makes every time...it scares me
ashley_ said:
charged it but it didnt start up
now phone behaves as in the 1st post, the only thing changed - now after se logo it shows animated splash screen for less a second
and this weird sound it makes every time...it scares me
Click to expand...
Click to collapse
Hmm some news at least...
Could you repeat the process one again (flash and charge) and post here the complete log of the whole flashing?
Because if we will not find anything unusual i will be out of ideas...
i understood what was wrong) after i read another manual i found out i should update my fw via SEUS before flashing...
successfully installed android 2.1, updated it via SEUS and installed 2.3.7. Now everything is ok)
thanks everyone for the feedback)
stuck at SE logo
dude can i have that manual link that u read....
hi! have someone solve this problem? my x10 wont turn, after flash with some firmware i got SElogo then with other firmware green light -> vibrate and then nothing! im really lost, dont know which rom or kernel i have now and i cant install a new one, flashtool always fail now
Hi,
I've been using CM7.2 with fxp 119 for some time and today tried an upgrade to fxp125.
Used flashtool to create a bundle with the kernel.sin that came in the zip file.
Flashed to x10.
Booted into cwm and selected install cm7.2 zip from sd card. All ok so far.
But when it rebooted it got stuck at the fxp boot screen, left it for about 30 mins and still nothing. So I pulled the battery and tried to boot it again, still nothing (stuck at fxp boot screen).
I tried wiping everything and re-installing cm7.2 but then it came up with an error (script aborted: assert failed: getprop) which I think means I deleted too much.
My next thought was to re-flash the kernel but now the phone won't boot into flash mode, holding the back button does nothing and it carries on into full phone mode then gets stuck at boot screen.
I tried varying combinations of buttons and try to do it quickly in flash mode before it jumps back to normal mode (which has worked long enough to flash a new kernel via flashtool) but it won't stay in flash mode long enough to get PC companion to repair it.
Any ideas on how to get it back up and running again on any rom?
from what i can understand is you CAN flash but its failing on pccompanion ?
so do you think you'll be able to flash a full rom trough flashtool ?
like this one for example
http://forum.xda-developers.com/showthread.php?t=1698204
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!FT 0.8 is mandatory to flash this bundle!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Yeah for some reason after a lot of attempts it did a couple of times. I had to preload Flashtool then held the back button whilst putting in the battery and plugging the USB at the same time. However it doesn't seem to do even do that any more.
If I plug it into a mains charger it tries to boot but stops at the bootscreen. If I try to plug it into the laptop on normal mode it tries does the same, if I plug it in whilst holding the back button it just tries to boot as normal then freezes at the bootscreen.
It just won't boot into flash mode at all any more.
ive helped someone before with about the same problem .
and at the end it turned out to be something silly .
so to make sure could you do the following steps.
1-Flashtool (select what to flash) then it will ask you to unplug, turn off phone etc.
2-unplug
3-take out battery
4-Replug
5-Hold back button and keep holding it
6-insert battery as your holding back button.
try flashing something you know that works / worked before . or the full rom linked i gave you.
the reason i ask you to do this is, if you cant flash or enter recovery what left right ?
Yep, am doing as you describe with a rom I know has worked before, but no matter how long I hold the back button it still starts to try to fully boot.
I've got the newest Flashtool but can't get that full ftf you linked, that file site doesn't seem to work for me, hasn't for months, just says it start downloading but never does.
The message from Flashtool (sounds serious):-
01/049/2012 19:49:34 - INFO - Selected X10_X10_X10.ftf
01/049/2012 19:49:34 - INFO - Preparing files for flashing
01/049/2012 19:49:34 - INFO - Please connect your device into flashmode.
01/049/2012 19:49:46 - INFO - Device connected in flash mode
01/049/2012 19:49:47 - INFO - Opening device for R/W
01/049/2012 19:49:47 - INFO - Reading device information
01/049/2012 19:49:47 - INFO - Phone ready for flashmode operations.
01/049/2012 19:49:47 - INFO - Start Flashing
01/049/2012 19:49:47 - INFO - Flashing loader
01/049/2012 19:49:47 - INFO - Ending flash session
01/049/2012 19:49:47 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
01/049/2012 19:49:47 - ERROR - Error flashing. Aborted
01/049/2012 19:49:47 - INFO - Device connected in flash mode
01/049/2012 19:49:48 - INFO - Device disconnected
01/049/2012 19:49:50 - INFO - Device connected in flash mode
ok next step is to try SEUS
instead of pc companinon.
http://sony-ericsson-update-service.en.uptodown.com/
get back to stock if possible and try again.
easy pesy
just revert back to stock 2.3.3 rom
open seus->support->update phone->in red color repair phone would be written in the window PRESS IT->wait then select your phone from the list....->it says take battery out for 5 secs->press back button and keep pressing it then connect the usb cable.....->voila it starts downloading stock rom from internet and then would update....
took 25mins with me
p.s till the process of selecting your phone you dont need to connectit just swtich off your phone.....
when I google it it seems to always point me in the direction of bootloader problems .
ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ER R_DYNAMIC="SIN header verification failed"
'''''I tried to figure out what's causing this and I end up with the "locked bootloader solution". I tried the instructions read here: http://unlockbootloader.sonymobile.com/instructions but when I typed ##7378423## no service menu was available...
'''''
answers that helped solve related!
If you didn't already have your bootloader unlocked and tools in place to reload the Android operating system (ie, ROMs or disk images), I strongly suspected you are completely screwed.
You can install an OS from scratch on your phone, but you need a specialized environment and tools to do so and those are often proprietary and/or secret. It is far easier to load a disk image (ROM) than do a base install. Either way, part of the process is an unlocked bootloader so that you can boot into an environment/tool instead of the existing OS. If you don't have a way to boot into something besides the installed system and have pooched that system - generally the only way you as a consumer have available to hack the bootloader - then you're up the creek. – Logos Apr 6 at 12:34
so basicly there saying if you did not unlock bootloader and a way of booting OTHER then the system itself ... you bricked it ..
if you cant flash
cant use recovery
whats left ?
Cheers for the comments about SEUS. However, before I had a chance to read them I had already read on another forum about someone using Wotan to repair a different model of Xperia that was in a similar state to mine. So I paid the fee and the thing worked.
It makes think it was something more to do with my laptop environment than the phone. Because the Wotan client came with it's own driver, which my device loaded and used when I connected it holding the back button, this seemed to make the phone stay in flash mode when connected.
From this experience I don't think holding the back button puts an X10 into flash mode, it merely asks the host 'can I be in flash mode?' and either the host says yes or no.
Awsome to hear you getting it up and running
Mind me asking if you installed flashtool drivers?
Sent from my x10 using xda premium
Hello everybody
I'm new here and in the world of Android.
But after a long preparation in order to install miniCM7 on my x10 mini, I decided to do it.
First of all, I rooted my phone using Flashtool and it worked fine
I then procceded to install xRecovery and save my current ROM and once again it worked well
I finally tried to flash the kermel and unlocked the bootloader but here is the problem
When I plug my X10 mini to my PC (while pressing the back button) it goes into flash mode
But the flash mode doesn't last for more than 10 sec making it impossible to continue the installation.
I've looked on google and I'm apparently not the only one who had this problem .... but still I couldn't find a solution.
Could you please help me with that? =)
Gahu said:
Hello everybody
I'm new here and in the world of Android.
But after a long preparation in order to install miniCM7 on my x10 mini, I decided to do it.
First of all, I rooted my phone using Flashtool and it worked fine
I then procceded to install xRecovery and save my current ROM and once again it worked well
I finally tried to flash the kermel and unlocked the bootloader but here is the problem
When I plug my X10 mini to my PC (while pressing the back button) it goes into flash mode
But the flash mode doesn't last for more than 10 sec making it impossible to continue the installation.
I've looked on google and I'm apparently not the only one who had this problem .... but still I couldn't find a solution.
Could you please help me with that? =)
Click to expand...
Click to collapse
Turn off your phone for a while before you try to flash, 20 seconds should be enough.
When flashtool asks to connect your phone into flashmode, follow the instructions on the pop-up screen till it disappears.
If the phone gets out of flashmode before the popup disappears, press home and back-buttons together. It will do a hard reboot and as soon as the screen is completely black, press the back-button again.
I hope you did unlock your bootloader already? You didn't mention that in your post
SmG67 said:
Turn off your phone for a while before you try to flash, 20 seconds should be enough.
When flashtool asks to connect your phone into flashmode, follow the instructions on the pop-up screen till it disappears.
If the phone gets out of flashmode before the popup disappears, press home and back-buttons together. It will do a hard reboot and as soon as the screen is completely black, press the back-button again.
I hope you did unlock your bootloader already? You didn't mention that in your post
Click to expand...
Click to collapse
I've tried to unlock the bootloader and Flashtool log looks like that:
23/004/2012 12:04:04 - INFO - Device connected in flash mode
23/004/2012 12:04:05 - INFO - Opening device for R/W
23/004/2012 12:04:05 - INFO - Reading device information
23/004/2012 12:04:05 - INFO - Phone ready for flashmode operations.
23/004/2012 12:04:05 - INFO - Flashing loader
23/004/2012 12:04:07 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
23/004/2012 12:04:07 - INFO - Start Reading property
23/004/2012 12:04:07 - INFO - Reading TA finished.
23/004/2012 12:04:07 - INFO - Ending flash session
23/004/2012 12:04:07 - INFO - Found semcSL
23/004/2012 12:04:07 - INFO - You can now unplug and turn on device, then plug it again
23/004/2012 12:04:07 - INFO - Waiting for device
23/004/2012 12:04:07 - INFO - Device connected in flash mode
23/004/2012 12:04:09 - INFO - Device disconnected
But when I try to check if it worked with S1tool, S1tool doesn't recognize my phone, I've tried to check with every USB port I got with the S1, X10 and E10 phone type but nothing appears in S1tool window ...
And I don't won't to continue without first checking it
hello everyone, i used the gpe port rom on my bell xzu everything was working fine until i updated "adaway" and it asked me to reboot. doing so leave me at the "google" logo
nothing is detected when plugged into computer
cant get into flashmode holding down & power
bootloader is locked.
caesu said:
hello everyone, i used the gpe port rom on my bell xzu everything was working fine until i updated "adaway" and it asked me to reboot. doing so leave me at the "google" logo
nothing is detected when plugged into computer
cant get into flashmode holding down & power
bootloader is locked.
Click to expand...
Click to collapse
Try these steps to get into flashmode so you can flash a FTF with flashtool:
Have flashtool setup and running with a c6833 FTF loaded and waiting for device
Connect ZU to PC
Hold the volume down key
While doing the above press the red reset button under in the SIM card flap
That should kick it into flash mode
blueether said:
Try these steps to get into flashmode so you can flash a FTF with flashtool:
Have flashtool setup and running with a c6833 FTF loaded and waiting for device
Connect ZU to PC
Hold the volume down key
While doing the above press the red reset button under in the SIM card flap
That should kick it into flash mode
Click to expand...
Click to collapse
thanks so much for the help blueether! so got into flashmode heres the log
02/006/2014 09:06:18 - INFO - Selected Bundle for Sony Xperia Z Ultra (C6806). FW release : 14.4.A.0.108. Customization : 1276-1569_R3C
02/006/2014 09:06:18 - INFO - Preparing files for flashing
02/007/2014 09:07:54 - INFO - Please connect your device into flashmode.
02/008/2014 09:08:06 - INFO - Device connected in flash mode
02/008/2014 09:08:07 - INFO - Opening device for R/W
02/008/2014 09:08:07 - INFO - Start Flashing
02/008/2014 09:08:07 - INFO - Processing loader.sin
02/008/2014 09:08:07 - INFO - Checking header
02/008/2014 09:08:07 - ERROR - Processing of loader.sin finished with errors.
02/008/2014 09:08:07 - INFO - Ending flash session
02/008/2014 09:08:07 - ERROR -
02/008/2014 09:08:07 - ERROR - Error flashing. Aborted
02/008/2014 09:08:07 - INFO - Device connected in flash mode
everytime idd plug it in windows would say installing new drivers then show SOMC flash device. i made sure flashtool was up to date and i reinstalled drivers will also attempt on sisters laptop to make sure it wasnt my pc but could it be anything else wrong?
EDIT: tried on my sisters laptop and everything worked out fine, thanks a lot blue