I am on a lenovo zuk z2 plus phone and currently i am using AOSP extended custom ROM but the moment i have installed it, and the moment i turned on my POCKET DETECTION, i noticed that it is awfully buggy . it works fine within ,my pocket, but then the moment in tame my phone out of my pocket, it doesn't respond....it remains off and the buttons/fingerprint scanner doesn't respond. its like the phone still in pocket detected mode even after it is out of m,y pocket. please help me out.
Related
Hello guys,
Recently I noticed my phone was having delay on touch response, specially when typing or swiping on keyboard. It also randomly pressing the screeen by itself . I also noticed that my screen was getting static effect on display.. idk how to describe it exactly but its like my screen was static. Whats weird is when I lock my phone then unlock it the problem is temporarily gone, but after few minutes it will occur again.
TAKE NOTE THAT my phone got wet ONLY on inside part of the screen.. but it was 4 or 5 months ago. But my screen got a little bit darker than the usual.
These are what I did :
1. Flashed stock rom / custom rom
2. Removed my tempered glass on Front
3. Cleaned the screen
Any help guys?
Same
im having this issue as well, previously on kitkat 4.4.4 stock it was fine.
switched to custom rom RR rom. and got this issue.. hmm
using the 3g version
Good day. Im new here and really need advice. I have the Sony Xperia z2, the screen cracked and the touch input stopped working, so I used the phone with a computer mouse and all was working fine except the cracked screen. Send it in for repairs, now has a new screen but now the phone's battery is discharging 1% every minute, camera and flashlight is not working and it's really hot on the back of the phone. Updated the phone software to Android marshmallow, results are still the same. I then opened the phone myself (the company did not waterproof it again), I then unplugged the camera and closed the phone, now the battery is operating normally again and it's not running that hot anymore. Plugging the camera back in results in steap battery drain, running hot and error: "camera stopped working" when opening any camera app or doing camera diagnostic. The Flashlight is also not working. Should I order a new camera unit and how does the Flashlight work or can it be fixed/replaced? I dont really want to spend lots of cash on this phone by handing it in to the repair center again, im a student and it already cost me R3700/250$ just for screen repairs.
Any help would be appreciated.
Thanks.
$250 for a screen repair?! You could have just bought a second user phone for less. Camera modules are cheap enough to buy but that may not be the problem. It's a gamble in my opinion.
Hello guys,
it seems I have a pretty similar issue.
My Z2 apparently got 2 new issues - the back camera stopped working (front is fine) and I cannot switch flashlight off once switched it on via menu.
Do you have any idea what could be the root cause for these probably related issues?
Already flashed entirely new firmware but that didn't help.
Thank you in advance.
One more observation here - just tried to disconnect camera module at all from the main board and the Torch became unavailable.
So it seems the torch is controlled by rear camera module.
Think to replace the camera module, I guess this should help.
im currently running LOS 14.1 on two KIW-L24. both seem to have a sensitivity issue. like many if not all, i keep my phone in my pocket. while on my daily routine which involve school and work my phone often gets very hot. it seems that just keeping my phone in my pocket often awakens the phone and keeps the screen on.
i have DT2W enabled which im sure is the problem. the thing is, i had it enabled with EMUI and it never caused a problem. so, what can i do to stop this while keeping DT2W? i also notice that it takes a bit more effort to wake the phone in EMUI than it does on LOS. can the screen sensitivity be lowered for DT2W?
any and all help is appreciated.
DT2W on mine is normal, just tried it, it doesn't activate that easily even when out of pocket. I do remember having DT2W issues on previous device - I had crazy behavior of music player (DT2W wakes up display in pocket => next contact changes track or stops/pauses music, good thing I had lockscreen PIN and changed default shortcuts to custom ones, god knew who'd it call).
Greater chances are that you have issues with ambient display, esp. if you enabled pocket and pickup mode. I've noticed that mine likes waking up randomly while it's on flat surfaces or during car rides (I keep it in holder next to my gearbox), so I guess accel. sensor is giving false data or gets big value peaks which trigger wakeup.
thanks for the input ShadySquirrel! yeah, i have had a few...... i guess thigh dials?? anyway, i dont have ambient display enabled on my phone and the other phone is now back to running EMUI. for now only my phone is having the problem. im gonna post on the LOS thread since it seems to be more of a Lineage issue.... i think. thanks for the help Squirrel!
I hope that issue is fixed far ago
Hey everyone. I've noticed that when I've left the phone with the screen closed for like 2 mins or so and after that if I try to unlock with the finger print sensor it doesn't unlock. I need to turn on the screen using the lock button and then the sensor works perfectly. So I'm thinking the sensor goes on a standby mode to save battery. I don't think there's an issue with the sensor since it's snappy as ever but I'm just wondering. Could you guys test this in your phones and let me know if this is the same for everyone ?
I haven't faced anything like this..You should provide some more info like which rom u r using...like i am using latest xiaomi.eu beta rom...
Seemed like some sort of glitch. A restart fixed it. I'm on stock 7.0 btw.
Hello guys, a friend of mine has a Poco F1 and few months back he had to change the display because the phone fall on the ground. Up until that moment he didn't faced any display problem and he was on custom rom (pixel experience I guess). He bought an eBay screen replacement but the phone started facing random screen freezes (lock/unlock and back to normal), which leads him to buy a second screen replacement from an other seller. The situation got worse with freezes and also proximity sensor wasn't working.
Yesterday he gave me the phone and I found out that it's a known problem with Poco F1 screen. Firstly I fastbooted last Miui global stable 12.0.2 and now the phone seems mostly usable but still some ghost touches are present. Than I checked the LCD type with device info he and discovered to have a fts_ts. Also Proximity sensor works when you press pretty hard on the screen next to the notch.
I think that the proximity sensor is faulty on this screen since with the first replacement prox was fine.
What about display problem?
1) I read about Miui introducing driver update to fix touch month if not 1 year ago so now last official global stable should have all the driver updated?
2) Are there any custom ROMs/kernels which fixed the issue better than Miui? Or did 3rd part developers just include new "screen driver" from Miui in their ROMs?
3) I don't understand the difference among nvt/FTS and EBBG/BOE/Tianma. Last three are display manufacturer but nvt/FTS what does that mean?
Thank you!
P.S. I just tried the proximity sensor test this morning and it was working, than I pressed next to the notch and now back to non working. ?
........ So I found out that Tianma/Ebbg/Boe are the manufacturers of LCD panels while nvt/fts are the manufacturers of touch panels.
I just rooted the phone and from hw info app I can see the combo Ebbg/FTS.
Now I am searching a Tianma/nvt replacement display, if you find one on AliExpress or eBay please link me.
Anyway I still have a doubt about custom ROM behaviour with different panels: does custom ROMs overwrite vendor partition when flashed or is it enough to just flash latest Miui (via fastboot?) before flashing a custom rom to have updated touch driver?
Inviato dal mio POCOPHONE F1 utilizzando Tapatalk
View attachment 5137419