Related
Hello.
I have zImage for Jailbreak PS3. But when I want to fastboot it , it says FAILED <remote: not allow>. I have rooted hero with villainrom 12 , and fully working adb ( even when I check adb devices , i have my device here ). And I cant flash theirs custom recovery with that zImage ( cannot mount -a with adb ).
Thanks
I believe you need the unlocked SPL from Modaco. -- check out the link in my signature.
MAN , I LOVE YOU , working , thanks very much
hi,
I can not do fastboot of zImage.
I do not know how, can someone help me please.
thanks
gossbo said:
hi,
I can not do fastboot of zImage.
I do not know how, can someone help me please.
thanks
Click to expand...
Click to collapse
Please read the post two above yours. It was explained clearly by theSpam that you need an unlocked SPL to be able to do this.
Pulser_g2 thank you for your reply.
But I am new to the world's root and the more I am French so my English did not good.
Could you please tell me how to unlock the SPL.
Thank you for your help
It really isn't difficult. If you can't understand the posts above pulsar isn't going to be able to explain it any better to you, you'll either have to find a French speaking forum which understands it or just try to understand what's here. As simple as I can make it (assuming you have a custom recovery installed):
1. Flash the unlocked SPL from theSpam's signature
2. Follow the fastboot method for zImage
Btdag thank you,
I managed to unlock the SPL, but my problem is the second set.
When you say: Follow the method for fastboot zImage,
I'll explain:
I turn off my hero,
I turn it on by pressing the back button at the same time
I get a menu with fastboot, the options I have are:
<vol down> HBoot Mode
<MENU> Reset Device
I have no zImage nowhere, yet I put the archive files of psfreedom on my sd card
Sorry if I bother you but can you help me.Please
Thank you.
Hmmm. You need to install the android sdk (there is usually a link in btdag's sig)
Then use command
fastboot boot zImage
Where fastboot binary and zImage are in present folder of a command prompt instance on your pc.
I'm sorry but I do not understand anything.
the fastboot should be doing from a hero
Hi
I got thank you very much for your help
One question, do I have to do the fastboot of zImage whit the PC every time
can I do from the phone?
gossbo said:
Hi
I got thank you very much for your help
One question, do I have to do the fastboot of zImage whit the PC every time
can I do from the phone?
Click to expand...
Click to collapse
Yes, fastboot requires the PC. You could flash the image, but I don't know if it functions as a normal recovery image or not...
fastboot.exe flash recovery recovery-RA-GNM-thunderg-1.1.0.img
I want to use this command to flash the P503 recovery mode
but I see some says that this required a spl-off on the phone
or there will be a failure when flashing
Is there anyone can answer me the questions below thx in advance
1.How can I know if my P503 is spl-on or spl-off
2.Is there anyone tried this before and success?anything I must look out?
3.Er...I am still thinking
Thx anyway!
Ps:I had tried install the recovery mode with adb but it failed and stuck
my system in udc_start() so I want to find another way to sovle this question
Hi, could someone write steps to possible return warranty ?
If I unlock bootloader I loose it, and I read when I flash stock ICS rom is impossible check bootloader status, but what with fastboot and recovery ?
How can I make it invissible in service ? Or if I flash stock ICS rom it will remove recovery ? Because I found recovery.img after extract KDZ...
Thanks for replies
wlado93 said:
Hi, could someone write steps to possible return warranty ?
If I unlock bootloader I loose it, and I read when I flash stock ICS rom is impossible check bootloader status, but what with fastboot and recovery ?
How can I make it invissible in service ? Or if I flash stock ICS rom it will remove recovery ? Because I found recovery.img after extract KDZ...
Thanks for replies
Click to expand...
Click to collapse
Hi wlado93, you could read this by maludroid (a way to lock unlocked bootloader apparently):
http://forum.xda-developers.com/showthread.php?p=44574942
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Thanks. Ok that's bootloader, and what to do with recovery ? When person from service press combination for recovery will know that bootloader is unlocked... Is any way how to completly delete recovery ? When I extracted KDZ I found recovery.img which has about 6-7 MB...will it delete CWM when I flash that image ?
wlado93 said:
Thanks. Ok that's bootloader, and what to do with recovery ? When person from service press combination for recovery will know that bootloader is unlocked... Is any way how to completly delete recovery ? When I extracted KDZ I found recovery.img which has about 6-7 MB...will it delete CWM when I flash that image ?
Click to expand...
Click to collapse
Hi wlado93, yes, it will.
When you flash a rom with kdz the custom recovery is deleted, not problem that way. You can flash your operator's rom, doing that, you also flash its recovery.
Cheers. Good luck.
Hello guys,
I want to back to my default android. I flashed the twrp from this forum and i get to many problems with so i need the file and a tutorial to do that.
I really need help thanks. The stock rom i need is orang219. I dont know if i flash the new rom this will be remove the twrp and relock the bootloader.. Thank you in advance !
you may want to use this but it's turkish rom. You may change language to english after flash to your phone.
https://www.mobilkulup.com/threads/htc-desire-825-a56_uhl-turkiye-stock-android-6-rom.2023/
hello, what kind of problem you got ??
and for bootloader you can relock it from the fastboot with the commande lines :
fastboot oem relock
for uinstalling the TWPR you can download the stock boot img Here
and install it with the flashtools
command line:
fastboot flash recovery recovery.img
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
you should have flashed vbmeta.img so that you don't get in bootloop
You mean your phone wouldn't go into bootloader by "Vol. down button + power button" holding from power off state?
T59y9 said:
fastboot flash magisk_patched.img
Click to expand...
Click to collapse
Do you mean "fastboot flash recovery magisk_patched.img"??
the correct command is fastboot flash boot magisk_patched.img
Maybe he wrote fastboot flash magisk_patched .img
but I think it would have returned an error
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
Maybe the rom you downloaded and the base rom running on your device is not the same version, that may cause the error. {Mod edit}
@T59y9
Hi
did you solve in some way?
My realme 7 5G is not rooted.
Just arrived me friday, I udated to new firmware trought recovery. After the reboot did not woke up anymore.
Black screen. no realme logo. nothing.
tried all button combinations, nothing. no boot, no logo, recovery, no fastboot.
tried also with charger attached, with usb on PC.
Nothing...
Any idea to solve my problem?
thank you.
how did you unlock the bootloader?
in depth test app says my model does not support in-depth test
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
gannjunior said:
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
Click to expand...
Click to collapse
oh sorry
any idea how to solve?
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
same anyone know how to solve this pls :/
First you all. Say the Model Number. You talk about Realme 7/Pro or 5G...
This issues is fixable. Just need extra tools to bypass Google FRP and a factory images ROM versions. Fixed few devices with the same situation!
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
did you find soultion of this at now because i also have same problem?
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
martinbrettphilo said:
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
Click to expand...
Click to collapse
It'll be kinda hard. You're gonna have to find a stock ROM - not an OTA update - and you're gonna need to use python to extract the contents from the .OFP file. This should be it. https://firmwarefile.com/oppo-realme-7-5g-rmx2111
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
immns said:
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
Click to expand...
Click to collapse
good. this for Realme 7 :
- Textguide : https://telegra.ph/Hard-Brick-Fix-for-Realme-7-01-25
hello guys, i'm having a problem here, I just installed a pixel plus ui and then installed the magisk app, then I renamed it to a zip file as mentioned in the website and went to flash it on my phone (Realme 7) after flashing successfully completed I pressed the reboot to system option, now it's stuck on the realme logo and doesn't budge anymore... I'm really worried please help me.