I flashed a firmware for another watch onto a Gear Fit 2 out of curiosity to see if it would work, but it didn't. I tried to use NetOdin3 to flash the original firmware back via WiFi but the Gear Fit 2 didn't show up in the list of WiFi networks on my computer (I was on "AP Mode"). What am I supposed to do to get the original firmware back?
Related
Hi folks, i'm italian and first of all i apologize for my bad english, my' problem is very madness. I decided to unroot my 3g 10.1 (gt p7500) unfortunately i flashed the stock P7510 firmware. From this point i don't know how, but i have a p7510 firm and tab (for me is very ugly about the skin and option, apart the lack of 3g). I tried everyfing about stock rom, firm, but odin say me everytime "FAiL"!!! Kyes recognise me as P7510 but it isn't!!! How can i return to my original brand new tab?
P.S. I installed hc-3.1_ota-full_sam_tab_10.1.zip from recovery by "install zip from sd card"....i made a mistake certnly
(i was rooted in my 7500 but i decided to go in the stock way because the battery issue, it decreased too quickly!)
any idea? However, i take back the tab to assistence service, i hope they know what to do. I notice that, in odin, the tab changes the ID port. When i'm in windows normally it shows ID10port, when i'm in downloading mode it shows ID9 port. Maybe tab is recognised by two way (p7510 and p7500) booooooo!
maverick601 said:
any idea? However, i take back the tab to assistence service, i hope they know what to do. I notice that, in odin, the tab changes the ID port. When i'm in windows normally it shows ID10port, when i'm in downloading mode it shows ID9 port. Maybe tab is recognised by two way (p7510 and p7500) booooooo!
Click to expand...
Click to collapse
If in Odin the port-id is shown and yellow, you shouldt be able to flash a stock rom.
Download this rom from the dev section and flash that one in Odin. Its the stockrom for P7500 Make sure usb-debugging is on. No need to do it in download-mode
http://forum.xda-developers.com/showthread.php?t=1262343
What's debug mode usb? Simple when i connect my tab to pc with odin on?
maverick601 said:
What's debug mode usb? Simple when i connect my tab to pc with odin on?
Click to expand...
Click to collapse
Well.
Go too: settings/applications/development on top you find 'USB-Debugging" tick that. Then connect youre tab with the pc. Then start Odin and select the rom-file you downloaded in PDA. If in Odin the com is yellow start the flash.
If you cant connect with Odin, uncheck the USB-Debugging and start again.
Hello,
Basically I have previously messed up my phone, so i decided to root my phone and put a custom rom onto it.
But I really missed my design for my Rom.
So I put Stock Rom back onto my Phone, (Unrooting it)
But after I did that, My phone is deciding not to connect to my EE Mobile Netowrk.
Wifi Works Fine.
So I have then tried to put a different Stock Rom onto it just to see if it was the stock rom.
But my phones not connecting to my PC.
have checked that i have Samsung Drivers.
I am using Stock USB.
I have changed through four different USB Ports.
It connects to my PC when it is turned on but not when its on Download Screen.
Any Suggestions?
Hi,
Has anybody got S2 successfully connected to Gear 2 watches, or is this lost course? I got to myself Neo couple of days ago. I use CM11 rom and installed latest Gear Manager to it. S2 himself pairs with success, even connects via bluetooth. But with Gear Manager 1.7, I can pair with success, but cannot connect successfully to watch. It's just saying connecting and doing nothing. Tried with version 2.0 of Manager and this one doesn't to anything, just saying error message that "unable to connect to Gear", upgrade software and so on. Samsung officially said what they are doing all to get Gear 2 watches working with all Android phones with 4.3 or newer in near future. But then and how long must we wait only future can tell. I'm really happy with S2 and CM11 rom, is this really so that I need to buy new phone or wait before guys from XDA are cooking working software..
Edit:
Yes, got working! Read Gear 2 thread and got hint to do restart after installation. Now Gear Manager 1.7.031004 / 2.0.14031004 paired and connected successfully. Got punch of errors (several stopped workings while connecting -saprovider.apk and goproviders.apk ), but watch and S2 seem to get along.
please explain your steps
Hi Equ,
I'm stuck with exactly the same problem.
I have a Galaxy Gear 2 Neo and I'm trying to connect it to my GS2 i9100.
Looking for other threads I've found only this one and post there my attempts: [HOW TO]USE Samsung Galaxy Gear with i9100
Could you please explain how you get the solution, which rom and gear manager apk have you used?
Thank you so much,
Flavio.
Mave751 said:
Could you please explain how you get the solution, which rom and gear manager apk have you used?
.
Click to expand...
Click to collapse
I used this thread http://forum.xda-developers.com/showthread.php?t=2723862 . I have latest CM11 by Markox89 on S2, and Gear Manager is latest available I believe 2.0.14042803, but on first time I used 2.0.14041404. Of course many things don't work with S2, but I used this solution to only pair and to finish watch initialization. Using only pedometer and heartrate monitor for daily usage. No alarmclock or notifications (missing them mostly), sadly, but many thing still working Root access was gained couple of days ago, so now must wait for modders, maybe something more will happen for Galaxy S2 too
Thank you so much.
I'm going to try this procedure and report here my results.
I will also investigate the code of the Gear Manager apk because the I'm quite sure the incompatibility message (device not supported exception) could be not a real issue but only a check in the code.
If this is true changing the result of the check should simplify the installation of the apk without need to modify the original build.prop file which could affect the correct phone functionality.
gear connected with i9100
Here my updates:
I was able to connect the gear with the GS2.
Unfortunately changing the puild.prop file record ro.product.model will affect every rom I've tested, after shout down the device can't start again.
I always needed to restore a previous backup in recovery mode.
Using Phone/GUI Interface method also doesn't work properly because I'm still not able to move the apk inside /system/app folder and this probaly is the reason I can't install S-voice and S-healt app.
However I've installed Gear Manager v2.0 14041404 and all Connecting-Fix pack apps (the only exception is SAWeatherProvider_signed.apk) on my GS2 i9100 with android 4.4.2 SlimKat rom.
Connecting the Gear always generate an error but the paring and connection procedure will complete correctly.
I want to buy gear fit but i am not sure it will work so i wont buy, maybe buy smartwatch i dont know (
Equ said:
Hi,
Has anybody got S2 successfully connected to Gear 2 watches, or is this lost course? I got to myself Neo couple of days ago. I use CM11 rom and installed latest Gear Manager to it. S2 himself pairs with success, even connects via bluetooth. But with Gear Manager 1.7, I can pair with success, but cannot connect successfully to watch. It's just saying connecting and doing nothing. Tried with version 2.0 of Manager and this one doesn't to anything, just saying error message that "unable to connect to Gear", upgrade software and so on. Samsung officially said what they are doing all to get Gear 2 watches working with all Android phones with 4.3 or newer in near future. But then and how long must we wait only future can tell. I'm really happy with S2 and CM11 rom, is this really so that I need to buy new phone or wait before guys from XDA are cooking working software..
Edit:
Yes, got working! Read Gear 2 thread and got hint to do restart after installation. Now Gear Manager 1.7.031004 / 2.0.14031004 paired and connected successfully. Got punch of errors (several stopped workings while connecting -saprovider.apk and goproviders.apk ), but watch and S2 seem to get along.
Click to expand...
Click to collapse
How did you manage to get you're watch working with you're s2. I have a sght989d S2 and I have been fiddling with it for the past 3 days trying to get it to connect. I would really appreciate you're input.
GhostConn said:
How did you manage to get you're watch working with you're s2. I have a sght989d S2 and I have been fiddling with it for the past 3 days trying to get it to connect. I would really appreciate you're input.
Click to expand...
Click to collapse
I used this thread http://forum.xda-developers.com/showthread.php?t=2723862 and it worked for me. But I have GT-9100 model of S2.
i tried to upload my gear fit with kies on my mac. it was connecting than stopped, had an error message. Now all the gear fit shows is a picture of gear fit/yellow triangle exclamation mark/ than pc. Can anyone help with this? thanks
I have same problem here. Still couldnt find right solution.
Just go into Download Mode and flash the ROM using Odin. There is a lot of tutos on XDA
Hi all. So I'm trying to get my watch out of demo mode and download new firmware via Odin3. I put the watch into download mode and it connects to the laptop with an IP address but Odin does not see the IP address. I've downloaded all necessary files, installed Samsung USB drivers for Windows
Is there something I'm missing. I've searched everywhere I've found tutorials for issues with USB connected devices buy nothing for devices connected through WIFI
Thanks for any help
Galaxy Firmware - How to Flash Samsung Galaxy Watch3 SM-R840
How to Flash or unbrick Samsung Galaxy Watch3 SM-R840 with Odin tools.
galaxyfirmware.com
Try using a USB cable, idk how the watch connects so try that.
Odin usually only connects with usb cable
Keno_I said:
Galaxy Firmware - How to Flash Samsung Galaxy Watch3 SM-R840
How to Flash or unbrick Samsung Galaxy Watch3 SM-R840 with Odin tools.
galaxyfirmware.com
Try using a USB cable, idk how the watch connects so try that.
Odin usually only connects with usb cable
Click to expand...
Click to collapse
The link you provided is for a wireless connection to Odin since the only way to plug into USB port would be to remove the back of the watch and attach a cable by soldering to the MB of the watch itself, the watch connects like a hot-spot through IP address
Im not sure odin works wirelessly...
The wireless is for debugging but odin dosent connect wirelessly...
Pretty sure you need to connect the charging station to the PC via USB, as opposed to the watch. In the article you linked it shows that it has a COM connection, which is almost certainly a local USB port. COM can be used over TCP/IP but it's not a usual thing. You should have gotten a USB cable with the docking station surely?
So last night was success, I did manage to flash the watch with new firmware wirelessly. It is not longer a demo watch, I'm so very pleased since it unlocks the phone full capabilities, launching Odin3 as administrator allowed it to pick up the IP of the phone, took a little over 9 minutes to accomplish.
Thanks for all the responses to my query
Regards
MikeThor said:
So last night was success, I did manage to flash the watch with new firmware wirelessly. It is not longer a demo watch, I'm so very pleased since it unlocks the phone full capabilities, launching Odin3 as administrator allowed it to pick up the IP of the phone, took a little over 9 minutes to accomplish.
Thanks for all the responses to my query
Regards
Click to expand...
Click to collapse
Nice!