Can't understand what the problem is. I tried to downgrade my Redmi Note 4 MTK but I think I did something wrong on the update procedure. After that I have followed all the guides I found (from Sp flash tool with preloader/without...With cust or with edited cust) but although the phone flashed perfectly without any errors at SP Flash tool, nothing at all shows when pressing on off button. No recovery, no fastboot...nothing. Like it's dead.
Any ideas?
Since there are no answers. Does anyone know someone I could pay to have it fixed? A remotely online repair store?
Happened to me before
Related
Hi guys, i've just buy a redmi note 4 and i've found an horrible custom rom on it, so i've decided to flash a china dev with sp flash tool, but following a guide i also did the format, now the phone is dead totally, but the pc windows 10 64 bit still recognize it in meta mode when i plug it, and also flash tool still recognize it,but when i try to flash i got brom error preload there is someone that can help me to resuscitate my phone?
thank you so much!
Pier
When you have flashed, did you uncheck the preloader?
tamagon76 said:
Hi guys, i've just buy a redmi note 4 and i've found an horrible custom rom on it, so i've decided to flash a china dev with sp flash tool, but following a guide i also did the format, now the phone is dead totally, but the pc windows 10 64 bit still recognize it in meta mode when i plug it, and also flash tool still recognize it,but when i try to flash i got brom error preload there is someone that can help me to resuscitate my phone?
thank you so much!
Pier
Click to expand...
Click to collapse
Horrible custom rom? Ummm which one?
I couldn't do anything, PayPal accepted to give the money back cause they didn't say any where that the software wasn't original.
Thanks to anyone
Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Use fastboot method to install fastboot rom
Taskavenkat said:
Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Click to expand...
Click to collapse
Do you know how to work with SP Flash Tools? It's what I would recommend.
kiko9895 said:
Do you know how to work with SP Flash Tools? It's what I would recommend.
Click to expand...
Click to collapse
Hi ,
Thanks for your reply.
SP flash tool only for MediaTek Devices. But Redmi 2 prime is Qualcomm device.So i am unable to use the SP flash tool.
Can you suggest me any other idea?
Hi
try fastboot method to restore recovery and other stuffs......
Perhaps you might want to go to a Redmi 2 forum? This is a Redmi Note 2 forum (i.e., different device).
DarthJabba9 said:
Perhaps you might want to go to a Redmi 2 forum? This is a Redmi Note 2 forum (i.e., different device).
Click to expand...
Click to collapse
oh sorry... i will check this on Redmi 2 prime forum.
Thanks.
Hello guys!
I've been trying and reading as much as possible and I haven't been able to bring my Viyo 5 Mini back to life, using SP FLASH TOOL, I have installed the drivers many times and in many different ways but nothing.
After a while looking up I found somwhere somebody said to deactivate the antivirus, I did it and it worked out but my phone ended up without IMEI and with the NVRAM error, so as it worked ONCE I tried to install a recovery to root it and fix these problems, but I got it bricked again, I tought I could rescue it again but after this it doesnn't work, the pc does the sound when I plug the phone but the SP Flash Tool does not start.
I install the drivers and they appear on Device Manager but they have the code 10 error saying the devices cant't start, only ONE works, the one that says Preload.
please someone help me I'm going crazy, I'm not very good at this but I used to handle it very well, it's this phone that is giving me trouble.
my pc it's on 64 bit and win 8, in case that info matters a lot, I have also tried running the SP Flash tool on XP (SP3) commpability
I have been switching the driver of the only device that seems to work to the others to see but still nothing.
thanks in advance for any help
the phone version again is Blu Vivo 5 Mini V050Q
Hello,
For some reason my Xiomi RN3 pro is stuck on bootloop. I tried ALL the guides on the internet to unlock my bootloader and then fix it by installing new flash. Altough everytime i try getting my phone from fasboot into EDL it just restarts back into bootloop so i cannot follow any guide i found on the internet. Can someone talented tell me why is that or how can i get my phone working again? Thank you!
Peaceleaf said:
Hello,
For some reason my Xiomi RN3 pro is stuck on bootloop. I tried ALL the guides on the internet to unlock my bootloader and then fix it by installing new flash. Altough everytime i try getting my phone from fasboot into EDL it just restarts back into bootloop so i cannot follow any guide i found on the internet. Can someone talented tell me why is that or how can i get my phone working again? Thank you!
Click to expand...
Click to collapse
Hi, the guides you read are obsolete. In recent MIUI/bootloader the option for "soft" EDL start was removed. If you're lucky so-called "deep flash cable method" will do EDL, otherwise "test point method" will work for sure, see http://en.miui.com/thread-244814-1-1.html
:fingers-crossed:
I flashed lineage OS using TWRP to my stock rom (Oreo). And dirty flash it. After i restart my phone, its already pitch black with vibration only every 20 seconds. And if i charge it, no battery icon appeared, only notif. light. PLEASE HELP!!!!!
I already removed the battery, cause hearing the vibration makes me feel uncomfortable hearing my phone as if it has a mouth saying "Please let me rest in pieces if you dont want me to fix ASAP!".
you can fix that brick with the sp flash tool. did that myself two months ago. it's not easy, but it works once you find out how. search for "sp flash tool" and "mtk brom mode". the tool gives some errors that doen't matter and some errors are not displayed but i found a way so you could too. hope this helps, if you have special questions i may can answer them from my memory but i forgot how the unbrick was done step-by-step.
mYXiao said:
you can fix that brick with the sp flash tool. did that myself two months ago. it's not easy, but it works once you find out how. search for "sp flash tool" and "mtk brom mode". the tool gives some errors that doen't matter and some errors are not displayed but i found a way so you could too. hope this helps, if you have special questions i may can answer them from my memory but i forgot how the unbrick was done step-by-step.
Click to expand...
Click to collapse
i already fix it. Thanks