hello i have flashed twrp and then flashed miui now my phone is not booting, strucked at boot screen if i flash any other rom its failing because system,storage,etc cannot be mounted(it is not getting mounted in twrp mount option) ,tried flashing in ADB sideload also .YGDP flash tool getting error in the middle so stock rom is also not getting flashed. what should i do:crying::crying:
RIP
same problem here. Internal storage 0 mb. . I tried everything but nothing worked.
Me too guys
I'm using an old phone now
Related
hi,
i got a P7510 working fine, flashed to AOKP Milestone4 4.0.3 (or 404) ... today i was trying to revert back to stock 3.x, but ODIN couldn't flash all the way, it always stuck somewhere when flashing system.img
i tried many ways, with or without PIT file, no luck ... tried on many different version of stock rom, same problem
it can still go download mode, it can still be flashed to CWM recovery ... but when flash stock rom, it stops ... anyway to put custom rom to the internal memory to flash thrugh recovery?
by the way, if i go CWM recovery, i can mount every partitions except /data ... bcoz the partition is broken? how can i repartition it?
thanks in advanced.
thnx for watching, it is solved by just using another pc ...
weird, but yup, it flashed all the to the end, and phone just reboot itself into setup screen ...
Hello.
I have a GT-i9305 andI tried the rooting by following the instructions at http://galaxys3root.com/ on my Ubuntu laptop with heimdall.
I managed to install the recovery and also flash the cwm zip. I saw som problems related to /cache/ so I wiped cache and after that I have not been able to get past boot logo. I hav ealso tried flashing a custom rom and doing a factory reset and wipe dalvik cache bu
t it did not help. I have tried Odin and flashing from a .tar.md5 file but it results in FAIL.
I can reach both download mode and recovery but that is all.
Please help, I need my phone.
did you use a i9300 method on your i9305? you've probably killed the phone.
flash a stock ROM via Odin (i9305 one) and factory reset from recovery. if that doesn't help - send it to Samsung.
And this is the i9300 section, you're in the wrong place
Thanks.
I got back to stock. I will try to use the i9305 method.
Mount /sdcard not possible
Wel, I have the same problem.
Samsung SIII International version. After installing a new rom (believe it was "jellybam-v6.1.0_i9300-STABLE.zip") but I am not sure, the phone boots only to the original logo and then the screen goes black. Nothing more.
I can get into recovery mode and download mode so I tried several recovery versions (CWM, TEAMWIN, latest ClockworModRecovery v 6.0.2.8.) and several ROM.
No mater what I install, I get the same results. Boot phone and it hangs after the standard Samsung logo.
I was able to find out "/sdcard" could not be mounted. All the recovery programs I used with the option "mount unmount" reporting the same "/sdcard could not be mount" error.
Formatting /sdcard all so won't work.
I am thinking installing a new kernel but I have some difficulties in finding witch one will work with my phone?
Any suggestions or help is really appreciated b/c I have no idea what to do next.
Samsung I9300
Win 7
Latest USB drivers from Samsung installed
No Kies installed.
Odin3_v3.07 installed.
Using Odin I flashed:
CF-Root-SGS3-v6.4.tar
recovery-cwmtouch-6.0.2.8-GTI9300.tar
recovery-stock-dlj4-GTI9300.tar
recovery-stock-blg9-GTI9300.tar
And a few more.
Due to being unable to acces the phone installing a zip file is not possible. Using "installing a rom from zip, or sdcard" from recovery is not possible.
I tried installing a file using sideload but was not succesfull. I can get the phone in receiving a file from sideload but was unable to send a file from the PC.
Thanx in advance
you have to do a factory reset after flashing a new rom
Did wipe/clear/factory set etc every time just to find the phone goes black after the Samsung logo.
One particular thing: I can see the /sdcard in some recovery programs but can't modify it.
How can I transfer a zip file using Sideload?
I can get into "download a file using Sideload" on my phone but what should I do to get a zip file transferred. Maybe then I can use "install from zip" from a recovery.
Update Problem solved (for me) http://forum.xda-developers.com/showthread.php?t=2162908
I flashed the 9305 firmware from here http://www.samfirmware.com/ in Odin then I was back to stock.
Then I rooted the phone by this instruction.
http://www.ibtimes.co.uk/articles/4...-lte-android411-android412-jellybean-root.htm
I have not tried a custom rom but I think it should work.
hello everyone
I would like to permanently hard brick my phone wt19i...... I tried everything from flashing other phone's rom, kernel and recovery. Tried using rom manager too, but nothing worked. As soon as I flash stock gb or stock ics, the phone comes back to life again.
Please if someone could suggest a working method so that even the service centre guys won't be able to fix.
Why would you want to do that
Easiest way would be to physically mess up the chip, shorting something or so.
Sent from my SM-N9005 using Tapatalk
How to short something in hardware.....all I found by searching was flashing improper things.....but each method failed....as soon as to confirm hard brick I tried to flash stock rom it flashed normally and booted too
anikanu said:
How to short something in hardware.....all I found by searching was flashing improper things.....but each method failed....as soon as to confirm hard brick I tried to flash stock rom it flashed normally and booted too
Click to expand...
Click to collapse
have Xperia Mini St15i rooted unlocked bootloader. Running on CM 11.0 very well
but I recent update to latest build 24072015 and I can't boot my phone; after I tried to restore my old backup,tried to install old Rom which is( I installed in past successful)l and tried flash Xperia mini stock rom ftf (various version) but phone doesn't start can say hard brick.
I can install all of them successfully but phone does not start. always displays error of "unfortunately the process com.android.phone has stopped and phone restart on boot logo again and again.
update......
I recently flash BeanStalk-4.4006-20131128-smultron and after many tries I success to start phone but I noticed that in apps only 50 MB memory is free. I didn't have installed any app. in past I have there is about 370 MB free.(xperia mini has 420 mb data partition)
I have try to erase system,data with fastboot but nothing happens
I attached text file of fastboot commands.
I tried to flash sony origional firmware too but it only restarts again and again .
I have tried to erase system and userdata with fastboot but i see that it encountered bad block in erase data, I can't understand why data partition can't be formated ? text document attached
I think my data partition is full. after reboot in recovery there is an error of " no space left in device " phone does not start normally. I can boot in recovery but still can not use phone .
running on CM 11 and this problem is start on flashing cm-11-20150723-UNOFFICIAL-LegacyXperia-smultron. after that my phone doesn't start.
I am using moto g. And by mistake while flashing rom via twrp recovery i formatted my rom. Now i dont have any os in my phone. I am stucked on "bootloader unlocked".. I read many thing how to improve it. Then i tried stock rom via fastboot. But i didnt work i am still stucked on the same page. My twrp recovery was corrupted. I flashed it again with fastboot. And tried different thing. Like flashing a rom with the help of otg cable,but by doing this my twrp recovery was again corrupted. I even tried to do adb sideload but Adb sideload is not working on my phone,it ends at o% and shows " failed" in my phone scree. Dalvin cache and caches are not able to be formatted by my phone. Everytime it shows the same thing "failed". I am really frustated now. Plzz guys help me
mayank012 said:
I am using moto g. And by mistake while flashing rom via twrp recovery i formatted my rom. Now i dont have any os in my phone. I am stucked on "bootloader unlocked".. I read many thing how to improve it. Then i tried stock rom via fastboot. But i didnt work i am still stucked on the same page. My twrp recovery was corrupted. I flashed it again with fastboot. And tried different thing. Like flashing a rom with the help of otg cable,but by doing this my twrp recovery was again corrupted. I even tried to do adb sideload but Adb sideload is not working on my phone,it ends at o% and shows " failed" in my phone scree. Dalvin cache and caches are not able to be formatted by my phone. Everytime it shows the same thing "failed". I am really frustated now. Plzz guys help me
Click to expand...
Click to collapse
hey mayank012,
Try the motoflasher tool.
http://exxecsoft.com/motoflasher.php
Dont try stuff you do not know how to use...search, search, and search again. Reading a few posts and trying to do it on your own without knowing what your doing is just being plain stupid...look where it got you. A simple search on how to unbrick a moto g should give you plenty of results
Sent from my SM-N910G using Tapatalk
hi,
i got the set with hang on logo situation WITH RED ECXLAMATION MARK on left top corner
i tryed to flash it with odin with several versions but always failed when flashing SYSTEM.IMG!!!
i tryed with z3x same thing.
i installed custom recovery TWRP via odiN to install a custom rom but i made a mistake: i deleted system and internal memory ((
now i can fully flash it via odin without system.img flashing failure BUT AFTER FLASH NOTHING CHANGED !!! when flash complete 100% ok phone reboot on TWRP !!!! as if i didnt flash it at all!!
i reflashed with pit file repartition/clear efs/erase full nand/update boot options and full 4 files = all operations ok but same condition as if i didnt touch it!!!!
i cleared and flashed efs = same result
tryed to repair system files with twrp but nothing worked ((
i flashed newer twrp (3.0) via odin but nothing changed still with the old twrp
please help any suggestion any idea? help
may be i should flash the emmc with direct emmc tool such as easy jtag plus any idea?