Hey guys,
I was trying to install Resurrection Remix (coming from NeatROm). Originally had TWRP recovery, but NeatROM left me with PHILZ recovery. I then installed CWM, and after some googling, found that TWRP is recommended over CWM. So I flashed TWRP recovery, and now my phone won't boot (stuck on boot logo), and I can't access recovery mode, only download mode. Drats!!!
If anyone can help me, I'd really appreciate it!!!!!
Thanks!!
Guit4eva said:
Hey guys,
I was trying to install Resurrection Remix (coming from NeatROm). Originally had TWRP recovery, but NeatROM left me with PHILZ recovery. I then installed CWM, and after some googling, found that TWRP is recommended over CWM. So I flashed TWRP recovery, and now my phone won't boot (stuck on boot logo), and I can't access recovery mode, only download mode. Drats!!!
If anyone can help me, I'd really appreciate it!!!!!
Thanks!!
Click to expand...
Click to collapse
just download your firmware from sammobile . com and flash it with odin..it should work
FDiHD said:
just download your firmware from sammobile . com and flash it with odin..it should work
Click to expand...
Click to collapse
Unfortunately, my PC or ODIN won't recognize my S2 When I plug it in (in Download Mode), it says USB device not recognized. I've tried downloading drivers, different USB cables and different computers. Drats.... Any suggestions?
Ah!! Had to use USB 2.0 !!!! WOOOOOO, all working again!!
Guit4eva said:
Unfortunately, my PC or ODIN won't recognize my S2 When I plug it in (in Download Mode), it says USB device not recognized. I've tried downloading drivers, different USB cables and different computers. Drats.... Any suggestions?
Click to expand...
Click to collapse
1. Put it in Download mode
2. Plug in to your PC
3. Take out the battery (you can put the battery back when odin recognized it)
try this
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
have you tried to re-install the Driver? make sure that you only use win 64 bit for flashing, many issues occurred when you try to flash using win 32 bit
I am using Windows 10 64 bit. Moreover, I have installed ADB drivers separately (although these seem to come with the Mi Flash utility too).
I think it's intended behavior not to be able to flash via Fastboot with the bootloader locked? I was hoping to be able to restore via Mi PC Suite but it can't seem to see the phone, although the computer does and Mi Flash does too.
try using Mi PC Suite, http://en.miui.com/thread-92720-1-1.html, After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer, and select the correct ROM file to flash
"I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too)."
For some reason, Mi PC Suite is not detecting the phone.
Ultimatum99 said:
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
noersetiawan said:
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
Click to expand...
Click to collapse
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Ultimatum99 said:
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Click to expand...
Click to collapse
Hi,
Thank you for the help. Unfortunately it doesn't work straight away, fortunately this leads me to the right direction, after I tried to point the driver to Xiaomi directory, a window dialog says the driver is 32 bit thus noninstallable for my PC, then I looked around for 64 bit driver for Qualcomm, installed it. I can finally install the driver but the phone is detected as unknown USB device, after removing it from Device Manager, restarted my PC, and tried again, it's still the same, on the third try it finally detected properly. It's working now, thank you very much.
Really weird why did MiFlash comes with noninstallable driver.
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Garu8 said:
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Click to expand...
Click to collapse
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
jokerpappu said:
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
Click to expand...
Click to collapse
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Garu8 said:
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Click to expand...
Click to collapse
then you should buy a usb cable which has a button in it which forces xiaomi devices to boot into edl mode.i forgot its name but i think you can google to find it
jokerpappu said:
then you should buy a usb cable which has a button in it which forces xiaomi deveot into edl mode.i forgot its name but i think you can google to find it
Click to expand...
Click to collapse
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Garu8 said:
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Click to expand...
Click to collapse
i saw it on ebay also.i think that seller will ship worldwide to any country.
here is the link
http://www.ebay.com/sch/i.html?_fro...le.TRS0&_nkw=xiaomi+deep+flash+cable&_sacat=0
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
jazz452 said:
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
Click to expand...
Click to collapse
As I have already said edl mode won't work since developers option was not activated as edl requires oem activated. I had already tried all the methods.
By the way thanks to u all at xda as I have successfully flashed new rom using deep flash cable method...
Nexus 10 rooted in a bootloop
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Novice12 said:
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Click to expand...
Click to collapse
Hi,
This is Redmi 3 section. The correct section for your device is here. Please explain your issue there. Good luck!
Sent from my Redmi 3 using XDA Labs
Unbrick Xiaomi Redmi 3s prime with unlocked boot loader
Hi all,
I've a Xiaomi redmi 3s prime with rooted and unlocked bootloader. I tried unrooting from SuperSu and the phone is in bootloop now. I had TWRP recovery mod installed and a nandroid back up in my phone. But, I can't even enter the recovery mode now. Fast boot is working. Please help me to unbrick it without losing the data or recover the nandroid back up at least.
Thanks!!
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
look
you got bootloop and its very very different from brick
update your title
hello i bricked my gr3 and now i am tring to unbrick it with sp flash tool installed every driver and there is no problem with drivers just when sp flash tool starts downloading it get stuck on AD 100% and after 10seconds it says error 2004 help plz
Gigageo said:
hello i bricked my gr3 and now i am tring to unbrick it with sp flash tool installed every driver and there is no problem with drivers just when sp flash tool starts downloading it get stuck on AD 100% and after 10seconds it says error 2004 help plz
Click to expand...
Click to collapse
Hi , did you try with other version of SPFT like this one ?
https://www.youtube.com/watch?v=9sly6LGIB0c
Try to disable driver signature , Run As Administrator and disable your Antivirus also and try. Good luck
Teddy Lo said:
Hi , did you try with other version of SPFT like this one ?
https://www.youtube.com/watch?v=9sly6LGIB0c
Try to disable driver signature , Run As Administrator and disable your Antivirus also and try. Good luck
Click to expand...
Click to collapse
Yes i tryed that too diffrent sp flash tools and driver signature disabled and runs as administrator i reinstalled drivers multiple times abd they all are working i tried everything i could imagine
Gigageo said:
Yes i tryed that too diffrent sp flash tools and driver signature disabled and runs as administrator i reinstalled drivers multiple times abd they all are working i tried everything i could imagine
Click to expand...
Click to collapse
1. Try another USB Port.
2. Lunch SP Flash again as admin.
3. Try another PC.
4. Check that the battery in the device is charged.
5. Try with diferent usb cable
6. Try another firmware
Teddy Lo said:
1. Try another USB Port.
2. Lunch SP Flash again as admin.
3. Try another PC.
4. Check that the battery in the device is charged.
5. Try with diferent usb cable
6. Try another firmware
Click to expand...
Click to collapse
well i tried everything but there is problem with step 5
i know that my battary is charging but when it gets enough power to start the phone it starts and instantly shut downs and this heppens every time i instert micro usb in but when i press buttuns it goes to meta mod (i think because i can see device with mtk drivers) and when i try to flash stock rom in sp flash tool it gets stuck on da 100% and i get error 2004
also i bricked my phone when i flashed u-boot.img as boot in twrp does that has to do something about sp flash tool or enything?
Gigageo said:
well i tried everything but there is problem with step 5
i know that my battary is charging but when it gets enough power to start the phone it starts and instantly shut downs and this heppens every time i instert micro usb in but when i press buttuns it goes to meta mod (i think because i can see device with mtk drivers) and when i try to flash stock rom in sp flash tool it gets stuck on da 100% and i get error 2004
Click to expand...
Click to collapse
Try again to flash latest stock firmware but not just keep holding Power button during flashing with SP flash tool , you can try also Beta Version of SP Flash tool .
Teddy Lo said:
Try again to flash latest stock firmware but not just keep holding Power button during flashing with SP flash tool , you can try also Beta Version of SP Flash tool .
Click to expand...
Click to collapse
Well i found only one firmware for my phone with proper scatter and i am using that and beta versions is not working too
Look here and try with sd update .
http://huawei-firmware.com/phone-list/huawei-gr3
Teddy Lo said:
Look here and try with sd update .
http://huawei-firmware.com/phone-list/huawei-gr3
Click to expand...
Click to collapse
nvm i fixed it i dissasmbled phone and removed battary wire then it installed
thank you for response
i cant flash my my phone using bootloader,cause my pc can't detect the device in fast boot mode,so is there any other way to install cusom rom?
Maverick 101 said:
i cant flash my my phone using bootloader,cause my pc can't detect the device in fast boot mode,so is there any other way to install cusom rom?
Click to expand...
Click to collapse
Try to check if your Fastboot drivers are installed correctly or not. Go to Device Manager in Your PC Properties and check whether your device is showing there in Fastboot mode or not? Only then you can unlock your bootloader and after unlocking you'll be able to proceed to Install and flash TWRP and Custom ROM's
No it doesn't!!! That's why i am searching for another way,
Maverick 101 said:
No it doesn't!!! That's why i am searching for another way,
Click to expand...
Click to collapse
Try Installing this.
https://forum.xda-developers.com/showthread.php?t=2588979
Tried it but it doesn't work
You need to connect your phone to usb 2.0 ports on your pc for the Mi Unlock / Flash tool to detect your phone in fastboot mode. If you don't have a usb 2.0 port, a usb 2.0 hub will also work.
Hope this helped.
Tried 2.0 also but no luck.
Maverick 101 said:
Tried 2.0 also but no luck.
Click to expand...
Click to collapse
It's just a connectivity issue, uninstall the drivers and retry everything from the start watching some guide on youtube.
It is normal, it happens some time, there is no other way to install twrp.