Hi guys, i have one question and one problem :
Question: Is there anyway to enable or install "Darken interface" on our P20-Lite just like Mate 20 Pro? I almost tried all Dark Themes but they all have problem in Notification Area, Settings, etc...
Problem: In the HiVision only the QR Code works and other options like Translate, Calories and etc... doesn't work or recognize any thing at all. Is there some Region Restrictions?! I'm from IRaN.
And one last thing i found my AppGallery not working as well. I tried even with VPN and it's showing the following error :
"Unable to connect to server. Please try again later."
ANE-LX1 9.1.0.132(C185E3R1P8)
Related
Hello all,
Not a great first post, but I have a problem, that I cannot solve myself.
I bought LUMIA 800 from a guy on ebay, really good offer(ofcourse), the phone was in good condition, all functioning. Checked the IMEI - not stollen. After taking it home, I noticed that I cannot log into microsoft live, facebook and twitter, from the add new account menu. It keeps giving me - there is an error, please try again later. However, day after that, the phone gives me a message - this demo phone is going to be reset. After that reboots, with all my data formated and starts installing content, like some demo contacts, messages and etc. Also a promo video is played, while I`m loading it.
So, in short - is there a way to get that phone to function normally? I tried both formats, from the menu and with the 3 buttons, it always starts loading the demo contacts and etc.
Any help will be greatly appreciated!
Pavel
ok, did my homework and searched the forums. I will try with standart debranding method, hope it works.
you can flash it using NCS (Nokia Care Suite). I will upload a handy tool for you. wait a moment....
here you can download the tools: http://www.multiupload.nl/91Y8NK6L7E
greatly appreciated Tim! thank you
Hi,
I also got one of those demophones and I tried Tim's method but When I do Step: 20 and Step: 21 I do not see the newer firmware there.
The line where it should be is plank.
I have downloaded firmware from navifirmplus and place it to that exact place what it is on Tim's document: C:\ProgramData\Nokia\Packages\Products\RM-801 without any subfolders.
But on my PC I had to make that products folder too, there was none when I first time navigate to that folder, I check File -> setting from product support tool for store and there that folder is right but I do not see that newer firmware, so can anyone help?
you must run the applications under Administrative rights. so right click on the NCS and click: "Run as Administrator"
otherwise the program doesn't have access to the c:\programdata\......
most accounts have administrator rights, but if you have UAC (userAccountControll) enabled on your computer than the error that you describe will come.
Hi tim!
I tried with administrative rights, now effect, still do not show "new software version"
Does that Product Code have to be same on downloaded firmware and that it is already on phone? caude in phone I have 059N394 and firmware I downloaded is 059N341
You solved your own problem ;-).
yes that's the issue, make the productcode that you downloaded the same as the productcode of your phone, and it will work.
in NaviFirm there is not a code with "059N394", I would download the firmware that is applicable to my country and color, and most matching with the productcode of the phone.
sorry for my bad english....
Please hit the "Thanks" button if I helped you....
Thanks! ur a MAN!!!
It worked!!
Please have you got someone firmware NOKIA LUMIA 800 RM-801 for Nokia Care Suite ?
Thank you very much for your help.
David
Hey guys,
I recently faced this problem on many Android devices, after a reset through recovery the device asks for Google ID verification!!!
I had a Lava Pixel V1(Android One) device.
I did a factory reset, and then it asked for the Verification.
After a lot of hit and trial, I found a way to Bypass it.
Steps:-
On the Wifi network add page,
I clikced on "Add Other Network",
Then, I clicked on the " Voice Input Button",
then I clicked on a small "Setting" button,
there I clicked add language(Note the device is not connected to internet),
there I selected a Language which is not installed, and after that,
A dialog appeared that "Cannot download the Package, add network",
this is the main part, here I entered the " System Settings", and Then I entered my Email ID and password and Successfully Bypassed the Google ID Verification.
But the point is, this method didn't, worked on most other devices, such as Samsung, Sony, Asus etc.
Therefore, I need to know a full proof method or methods for Other Devices, to help myself and others as well.
On internet there's no specific info about this.
Plz help with this, Post the Method to Bypass, Google ID Verification for any device, if you know.
Hello there guys.
So my problem is that I cannot setup a Proxy server on my Android properly, when I'm trying to use it I just get "ERR_PROXY_CONNECTION_FAILED" error in the browser.
I tried 2 programs (by the same author) - Servers Ultimate and Proxy Server.
With SU for example I created a simple "proxy server", obtained the ip/port from the "connection info" and was trying to connect through it, with no success...
I tried this on two different phones. One is Samsung A3 2016, second is something old with Android 3+ version.
Can someone point me to the right direction? I would be very thankful.
Also to mention, I'm trying to perform this with 3G connection and not Wi-Fi. Does this interfere somehow?
I just realised in the Status tab of a created instance it says:
"Public Connectable - No". Even with Wi-Fi. I asked one friend to perform this on Meizu and he got success with SOCKS server/Wi-Fi setup. Hmm.
What is the solution to this issue. I'm also facing the same over 3G network.
Hi guys,
Weird issue here. I just signed up for a MI account and I'm looking to unlock my Redmi Note 4. When I go to get unlock permissions (by visiting http://en.miui.com/unlock/), I am prompted to create a forum username. However when I create one I just get an error message. I tried again with a totally different account and got the same problem, tried in firefox and on a different internet connection (4G hotspot). Any ideas? Thanks. Here is the error message: https://i.imgur.com/2xoYEjF.png
...anyone?
Hi,
I remember some sort of problem like this.
I think I had to create a user name in settings in my phone first:
Mi Account / Personal info / Name
Thanks. What actually worked was trying to log into the english MIUI forums prior to trying to apply for unlock permissions - the username I created there seemed to work OK.
Dear XDA,
Recently, a phone Lenovo A858t has been flashed with "A858t_USR_S302_1501111200_MP13V11_BMAIN_RU" firmware using SP Flash Tool (preloader checkbox was checked and Format ALL and Download was chosen in selectbox). After that there was no signal for both SIM cards. So, we've tried to set IMEIs with Mobileuncle app as here's written. Also, the commands were: AT+ EGMR = 1,7,"IMEI_1" and AT+ EGMR = 1,10,"IMEI_1 + 8". So, now when viewing Phone 1 and Phone 2 options in Radio Information section which is in Mobileuncle app. It shows two different IMEIs and this's OK, but when calling *#06# it shows two lines with same first IMEI (might be chinese firmware bug ...), but SIM and dialling work well.
The Internet doesn't work as should to. For example, when trying to add an account for Google ( it asks "New" or "Existing" account, tried both ) it can't connect to an Internet ( also the Internet arrows (4G) in status bar don't change ). When trying to surf with browser it shows that there's no Internet, but Google search works! I mean, it shows result of search query and 4G arrows in status bar shows activity. Also, included "firewall" shows that Google search ate ~100kb of Internet. So, as the result the Internet doesn't work and second SIM, too ( second SIM is from another country so this could be another reason ).
What could this be? How to enable the Internet in this firmware?
Thank you very much!
Best regards