Hi all,
Wishing you all a happy New Year in arrears and the very best for the next 12 months.
I've got a problem with my device, its a STF-AL10 model with international rom bought during the November Sales.
It came with STF-L09C432B150 installed, I got the bootloader unlocked, TWRP installed and rooted with Magisk and was working fine except the capacitive buttons.
I thought I could live without capacitive buttons but I didn't work out and I had the urge to find a solution. After some intensive reseach (48hrs on a weekend in my 'lab') it seems the B120 firmware had no issues with the capacitive buttons, so I tried to downgrade to that and thats when the problems started.
Coming from an ancient Sony Z2, I never had issues flashing ROMS, Kernels and the sort as it was almost always easily done in TWRP or CWM (I had a Multi boot thing going, so I chose which recovery I fancied!). Anyway this are my issues now:
- Obviously, my phone was rebranded at origin as I know for sure AL-10 is not for EU market
- I tried restoring the same STF-L09C432B150 (rollback package found on XDA) with DC-Unlocker (wasted 19 Euro) but did not work. Always stops at 5% near end of flashing.
- Tried B130. same error.
- Tried Chinese STF-AL10C00B110. Same error.
- Tried full board flash for STF-AL10 with all DC Phoenix files. Same error.
- Tried forced method with files on a Sandisk SDcard (64GB) formatted to exFAT. Fails, wrong files.
- I noticed that in ADB, it said my bootloader was unlocked but FRP locked.
- After board flash, ADB said Bootloader unlocked (nothing about FRP) but in Muli-tool it says LOCKED.
- Now all ADB commands the write to the phone give errors.
DC-unlocker support keep on saying I should use the correct firmware for my phone, ok but the phone was rebranded at source...do use a Chinese firmware first then update ?
in desperation I did another full board flash but this time I think I wiped oeminfo and Vendor partions. ( I think this is what caused the HARD-BRICK!). Now no Honor logo, no Recovery, No eRecovery, nothing but a blank black screen. ADB still works but no status about bootloader or FRP.
IMEI has changed to 0123456789ABCDEF
You can all laugh and shake your heads which I will take as my punishment but is there a solution to all this, I'm willing to pay another 19 EUR for DC-Phoenix if it helps to fix my phone and if possible get it rooted with all buttons and functions working. That was my intension all along (I'm not really interested in custom Roms, just root access!).
HCU tool for some reason does not install on my computer, and besides, the phone does not boot into an OS to be able to change OEM and VENDOR data.
I even tried the HOTA.zip in the ReBRAND HONOR 9 thread but the file is missing (link down).
And to top it all there is no UK service center.
Please advise...
I think DC unlock is not supported for thì this model. Did Did you try Huawei Funky???
Apparently all versions of Honor 9 are supported by DC-unlocker and DC-Pheonix....
ums1405 said:
Hi all,
Wishing you all a happy New Year in arrears and the very best for the next 12 months.
I've got a problem with my device, its a STF-AL10 model with international rom bought during the November Sales.
It came with STF-L09C432B150 installed, I got the bootloader unlocked, TWRP installed and rooted with Magisk and was working fine except the capacitive buttons.
I thought I could live without capacitive buttons but I didn't work out and I had the urge to find a solution. After some intensive reseach (48hrs on a weekend in my 'lab') it seems the B120 firmware had no issues with the capacitive buttons, so I tried to downgrade to that and thats when the problems started.
Coming from an ancient Sony Z2, I never had issues flashing ROMS, Kernels and the sort as it was almost always easily done in TWRP or CWM (I had a Multi boot thing going, so I chose which recovery I fancied!). Anyway this are my issues now:
- Obviously, my phone was rebranded at origin as I know for sure AL-10 is not for EU market
- I tried restoring the same STF-L09C432B150 (rollback package found on XDA) with DC-Unlocker (wasted 19 Euro) but did not work. Always stops at 5% near end of flashing.
- Tried B130. same error.
- Tried Chinese STF-AL10C00B110. Same error.
- Tried full board flash for STF-AL10 with all DC Phoenix files. Same error.
- Tried forced method with files on a Sandisk SDcard (64GB) formatted to exFAT. Fails, wrong files.
- I noticed that in ADB, it said my bootloader was unlocked but FRP locked.
- After board flash, ADB said Bootloader unlocked (nothing about FRP) but in Muli-tool it says LOCKED.
- Now all ADB commands the write to the phone give errors.
DC-unlocker support keep on saying I should use the correct firmware for my phone, ok but the phone was rebranded at source...do use a Chinese firmware first then update ?
in desperation I did another full board flash but this time I think I wiped oeminfo and Vendor partions. ( I think this is what caused the HARD-BRICK!). Now no Honor logo, no Recovery, No eRecovery, nothing but a blank black screen. ADB still works but no status about bootloader or FRP.
IMEI has changed to 0123456789ABCDEF
You can all laugh and shake your heads which I will take as my punishment but is there a solution to all this, I'm willing to pay another 19 EUR for DC-Phoenix if it helps to fix my phone and if possible get it rooted with all buttons and functions working. That was my intension all along (I'm not really interested in custom Roms, just root access!).
HCU tool for some reason does not install on my computer, and besides, the phone does not boot into an OS to be able to change OEM and VENDOR data.
I even tried the HOTA.zip in the ReBRAND HONOR 9 thread but the file is missing (link down).
And to top it all there is no UK service center.
Please advise...
Click to expand...
Click to collapse
Try stock service B130 firmware:
https://forum.xda-developers.com/honor-9/how-to/stf-l09c432b130-capacitive-buttons-100-t3729106
Instead of step 4 do forced upload: VOLUME UP + VOLUME DOWN + POWER
Hi,
I've managed to re flash b150. In doing so I got back recovery and erecovery but when you reach that final stage of the process the phone stops at 5%. When I reboot to recovery, factory reset stops at 35%
Any ideas
?
Sent from my [device_name] using XDA-Developers Legacy app
ADB now showing BOOTLOAD UNLOCKED but there is no FRP status.
Sent from my [device_name] using XDA-Developers Legacy app
ums1405 said:
ADB now showing BOOTLOAD UNLOCKED but there is no FRP status.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
FRP status is not only on Chinese phones
you need to sew firmware for al10
The phone was rebounded by the shop I bought it from.
It said STF-L09B150 indexical info when the phone was working.
So if I'm going to repair this brick what update files should I use?
Original Chinese or the b150 used when rebranded?
Sent from my [device_name] using XDA-Developers Legacy app
Hi all,
FYI, I've sent the phone back to the shop I bought it from.
I'll take my chances, better than paying money for something that may not work.
Thanks everyone for showing interest in my situation, I let you all know how I get along with this issue.
Ps.: As a community, lets push Huawei/Honor to release Kernel Sources for this model and others like the P10 Plus.
Ps: Huawei/Honor have to realise that a strong developer community adds value and desirability to a product. That's how a product becomes 'Cool' translating into more revenue/customers/profit - eg OnePlus.
.
Hi all, a quick update .....
Sent the phone back and from what I gather the phone actually had an issue with the main board.
Now enjoying a brand new MATE 10 (Non-pro with 6/128gb) in beautiful Obsidian black.
Wonderful.
Back in december/january some users reported a glitch while rebranding STF-AL10 to STF-L09 with the old nougat hwota (at oem bin flashing step).
After editing hwota script, then rebranded : they ended with a FRP locked status.
Their only way to unlock frp was with dcunlocker or funkyhuawei I don't remember.
After frp unlocked, their bootloader wasn't seen through fastboot.
I think this could be solved by regedit a value in registry.
To my knowledge the only public firmware files working with the dload way (3 buttons + usb connected) are the one titled "service repair", the others one won't work dload as they are. They are for hwota or forcing "official" ota.
Hey folks,
I've tried my best so far, but I am stuck.
I wanted to change the ROM on my wife's Redmi 3 pro. It was running on a rather old RR version and I wanted to go back to MIUI to have a better camera.
After an unsuccesful attempt to flash this, I was stuck in a bootloop.
This - in general - was no problem: I've decieded to flash an official firmware via MiFlash, but this apparently didn't work as well.
So, now MiFlash has locked the phone again but not properly installed anything.
I can access Fastboot and the pre-installed recovery, but nothing more.
The unlock tool tells me that I can't unlock it because it is apparentyl not bound to my MI account (and I have no clue with which account I've unlocked it the last time).
Desperately appreciation any kind of help!
Thanks in advance.
UPDATE: I was apparently not patient enough. After quite a while it finally booted. Now I can access the system again, but still can't unlock the phone.
UPDATE 2: I also found out with which account I've unlocked it and thus everything worked after all. Now sporting Lineage 14 with camera mod.
Please, feel free to explain how can it finally booted. Your experience might be help somebody sometime.
?
Hi
I've recently tried to unlock my redmi note 3. I followed the instructions to the letter but I think its not worked because I'm on the last version of miui for the phone and I'm guessing the bootloader unlocker isn't compatible with the last version of miui. The phone is now stuck in "This device is locked" and the partial Mi account listed isn't the one I registered to the phone, although the phone number is correct. As a result I can't log into my account as I changed my number over a year ago.
Basically does this mean I need a new phone or can anyone help. I've read a previous guide on xdadevelopers from 3 years ago for someone who said their device is locked but the links on youtube don't appear to be working now.
David
hi
i got this device Honor 10 COL-L29 since years.
it's stock, no root, no unlock, nothing.
i need to do deep scan to recover my deleted photos.
i already tried many applications with no succes, because they need root. Already tried with adb, but i need block level, not file levels. And i got a permission error with adb on block level partition.
i know that unlock code is over by manufacturer, what are my options today to achieve my goal ?
Is it possible to get back to EMUI 9 with my software and phone version ? and after install TWP and root ? how to unlock ?
best regards !
seem to be a ****ty phone =) wow so much answers, lol
Hey there! First post.
Before Huawei stopped giving unlock codes in 2018 I got mine but I never unlocked because of warranty. Now I really want to unlock but from EMUI 9 onwards (I have 10.0.0.202(C432E9R1P3) installed) they removed the possibility of unlocking via the
Bash:
fastboot flashing unlock
command. I spoke today with Huawei technical support and they confirmed that, without rolling back to EMUI 8, I will not be able to unlock even with the code.
This leads us to the second issue: I cannot rollback via HiSuite, it does not show me the "other versions" button that could roll me back. Huawei support told me that button is the only official way and as it is now it is impossible for me to do a rollback due to security concerns of old EMUI versions. He also told me that the unofficial way is to install the system myself in someway he could not help me with.
I tried everything I could find online and everything I could think of but nothing worked: How do I rollback to EMUI 8 to get the unlock work?
Thanks in advance