When my Flashing of stock OS turned to a disaster, Technically my LYF Flame 8 (LS-4505) hard bricked. Not able to boot up, enter recovery or EDL mode. But, somehow I managed to put it on Fastboot mode via Key Combo (Vol Up + Power, then Volume Down + Power). Computer initially detected it is "kedacom android bootloader interface" in Device Manager and Ándroid' in Safely Remove section. Then I updated Kedacom driver to adb driver... Voila... It detects in fastboot mode. But, the problem is that... None of the fastboot commands works. Everything displays same out put " FAILED (remote: unknown command)".
fastboot reboot have success message but, no change happens in Device. CMD test PINS are also available in my device. But, I can't able to bootshoot it.
Device Details :
LYF Flame 8 (LS-4505)
Qualcomm snapdragon 210 msm8909 (4 core)
Battery Detachable.
Related
I am having a REAL BUGGER of a time with my Xiaomi Redmi Note 3 Pro (Snapdragon)!
1. It is not recognized by ADB in Fastboot mode.
2. I suspect it shipped wit a vendor ROM, and I'm trying to flash latest Official MIUI Global Dev (Marshmallow) ROM, but I keep getting errors in MI Flash (screenshot attached).
3. I want to Flash TWRP, BUT ADB isn't working, AND I cannot get to the download page for the cracked bootloader.
4. Seriously considering Resurrection Remix ROM, instead, but most of the above issues still apply.
I am NOT new to custom recoveries, flashing ROMS, ADB etc, BUT I am dealing with a new PC (Windows 10 Home, 64 bit, like my old (dead) laptop), and I'm new to this device.
PLEASE HELP. (Quite frustrated)
Fastboot won't recognize adb commands you have to use fastboot.
What you can try is booting into emergency download mode and using my flash to flash it from there. I think it's " adb reboot edl" while the device is on with USB debugging or using the mi updater app ( tap the three dots I think).
I think that this is not the correct section for your question, and i dont know the procedure that you follow but try to follow this procedure:
-Connect the phone at pc with USB cable
-Make sure that debug mode and OEM unlock was abilitate in dev settings
-Copy twrp.img in adb folder
-Shut down the phone and press power botton and - vol buttons for enter in fastboot mode
-Run this commands by terminal open in adb folder
fastboot devices
-If fastboot recognize correctly the device run this command
fastboot fash recovery nameoftwrp.img
-After reboot the device with this command
fastboot reboot
When the phone reboot press immediatily vol + for enter in twrp
Good luck
GOT IT! FINALLY!
-I finally got ADB to connect, and was able to enter EDL through ADB.
-Re-downloaded ROM from web.
-Re-extracted.
-FLASHED SUCCESSFULLY!
-SETUP COMPLETED SUCCESSFULLY!
-YAY!
(I think the original download was corrupted, somehow.)
after flash Fastboot Rom (Global Stable)
When i power on the device it Stops at mi verification page (see Photos)
both the sim inesrted Then also it is showing plese insert sim(may be this problem solves when I login to mi account But unable to login mi account from this error)
1)iam unable to enter edl mode from adb cmd (Usb debugging is not turned on because this error not allow to access phone)2)EDL mode from Fastboot mod(fastboot cmd) also not working. cmd shows waiting for device (all the driver all installed correctly)
3)unable to enter EDL mode from After diconnect & connecting battery connect computer with volume button pressed together
(last time i enter EDL mode From this type That time mobile is soft bricked)
bootloader Unlocking also stuck at 50% showing Couldn't verify Device this problem is from when i purchesed this mobile
Chinmayhegde said:
after flash Fastboot Rom (Global Stable)
When i power on the device it Stops at mi verification page (see Photos)
both the sim inesrted Then also it is showing plese insert sim(may be this problem solves when I login to mi account But unable to login mi account from this error)
1)iam unable to enter edl mode from adb cmd (Usb debugging is not turned on because this error not allow to access phone)2)EDL mode from Fastboot mod(fastboot cmd) also not working. cmd shows waiting for device (all the driver all installed correctly)
3)unable to enter EDL mode from After diconnect & connecting battery connect computer with volume button pressed together
(last time i enter EDL mode From this type That time mobile is soft bricked)
bootloader Unlocking also stuck at 50% showing Couldn't verify Device this problem is from when i purchesed this mobile
Click to expand...
Click to collapse
If your bootloader was unlocked earlier, long press volume down + power buttons, phone will boot in fastboot. Using XiaoMiFlash tool flash global stable or dev miui fastboot rom
Siddk007 said:
If your bootloader was unlocked earlier, long press volume down + power buttons, phone will boot in fastboot. Using XiaoMiFlash tool flash global stable or dev miui fastboot rom
Click to expand...
Click to collapse
bootloader is locked
did you already try below tools, last time this tool help me to enter edl directly from fastboot. (softbrick in fastboot mode)
fastboot to edl v2
abihary said:
did you already try below tools, last time this tool help me to enter edl directly from fastboot. (softbrick in fastboot mode)
fastboot to edl v2
Click to expand...
Click to collapse
didn't worked
please tell me how to bypass that miui verification error
Hey friends i was able to unlock bootloader of my REDMI NOTE 3 OFFICIALLY.
I wan to root the device and install TWRP but for tat i have to connect my phone in fastboot mode.
The thing is phone is recognised as an adb device when it is on but after putting the phone in fastboot mode my laptop is not showing in cmd after " fastboot devices" command
plz help if anyne know how to fix this.
How are you putting it in fastboot mode?
did you already install correct driver in your pc?
you can try to instal latest mi pc suite which will help you to instal correct driver for your phone.
If you're already success unlocking with official way..then it's mean your fastboot driver already correct (if you're using the same computer when you're unlocking before)
Maybe i think you're missed something to put your phone into fastboot mode..
First way you can go into fastboot mode with ADB command while your phone already ON, just typing command "adb reboot bootloader" then enter..your phone will reboot into fastboot mode
Second way to go into fastboot mode firstly you must turn off your phone..just wait until that phone is truely OFF..
then press and hold volume down button..then followed with pressing and hold power button..your phone will booting into fastboot mode.
My device is " 10 or D (3gb) " :
Chipset :- Qualcomm Snapdragon 425
OS :- Stock android was 7.1.2 but, upgraded to 8.1 (Oreo).
Before 10 days i executed a command -- fastboot oem lock -- this command was executed successfully, But after this my device was not booting, when i long press lock button than there was a boot logo for just 0.5 sec and nothing.
After this my device was recognized as -- QH_BULK -- when i installed qualcomm drives, then it was shown as --Qualcomm_Qd_loader 900E -- . I tried some combinations of buttons then finally got --Qualcomm_QD-loader 9008 .
When i searched about "Qd loader 9008" then i found to flash my Stock firmware by QFIL tool. I flashed my Stock rom many times but, also after a successful flash my phone is not booting, also now there is no boot screen after pressing power button. Its now completely black, but charger LED is glowing.
I have still a hope. I searched about my problem, then i found that either my --emmc storage-- is corrupted or the command i executed --fastboot oem lock-- is preventing partitions from overwriting .
Now if my emmc storage is corrupted than i think i have to boot my device from SD Card. Is someone have " emmc.img " of " 10 or D " then please share with me.
Now the situation is, my phone have totally blank screen, LED indicater is glowing red, on connecting to PC Device manager shows it as "Qualcomm_QDLoader 9008",
Also i tried to give a command --fastboot oem unlock-- at this moment. But fastboot is not recognizing my device. On typing --Fastboot devices-- no device is listed.
How could i unlock oem to flash rom.
Hi i download another stock rom of my device which was maybe a fastboot rom because there was a fastboot.bat script in it.
I tried to flash it by miflash tool. Flash took 4 seconds and ended with error message.
After this now my device is recorgnized as
Qualcomm_hs-usb_diagnostic 900E
And now my device started vibrating a little after pressing lock key or volume key
I tried many key combinations but it is not getting qd loader 9008 mode.
I also tried to disconnect battrey connector and then connected to pc but still in 900E mode.
Help me to get 9008 edl mode
hi..
Greetings to every Android Magicians out there...!
Device:- MiA1 (Never rooted)
1.USB debugging was enabled and OEM is not enabled.
2.Hence Boot loader is Locked.
3. Adb drivers installed in my laptop.
4.Windows driver signature are disabled.
5. Xaiomi flash tool and drivers installed.
6. Qualcom HS-USB Diagnostics 900E installed.
7. Can be enter in fastboot mode and edl mode as well.
The problem:- My MiA1 was never rooted (USB debugging was enabled and OEM is not enabled.).
All apps are force stopped suddenly while using the phone so tried to reboot my devices,
and there it begins.. it stuck at boot logo.
Things i have tried:
1. Fastboot Mode:
Since the boot loader is locked i cant flash Any ROM through fastboot so i tried to enter in EDL mode through CMD.,But failed.
so i just open the back panel & however entered in EDL mode by Testpoint.
(and i've tried in fastboot through cmd { fastbooot oem unlock } it says successful but when i check the status through
{fastboot oem devices-info} but the bootloader is still locked).
2. Test Point Method:
I tried to flash MiA1 official global version ROM's (7,8,9 as well) through Xaiomi Flash tool(2015,2016,2017 versions) by test point Methods.
i have encountered the problems like AKC don't match and Cant receive Hello packets.
However i have got solved this Prolems by using Beta version of Xaiomi Flash tool.
3. When i flash (tissot_images_7.8.23_20170823.0000.00_7.1_61cf97d794) flashing was successful but devices still stuck at
Androidone logo.
Tried to flash other versions of ROM (tissot_images_V10.0.4.0.PDHMIXM_9.0) flashing was successful but devices still stuck at
Androidone logo.
By the way i have tried it using different type C cables and different ports (COM5, COM20,COM40 etc) and and different laptop as well but No luck.
i hope you guys do some Magic and help me out.
Thank you so Much for reading this thread.