Hi everyone, how can i extract the stock kernel from a miui rom? just that I use an zip tool and then I flash it with the usual commands or do I have to use another tool?
Ciao
Timonenero said:
Hi everyone, how can i extract the stock kernel from a miui rom? just that I use an zip tool and then I flash it with the usual commands or do I have to use another tool?
Ciao
Click to expand...
Click to collapse
You can use the boot.img file in the Stock Rom which contains the kernel itself.
And then flash it via fastboot - done.
You can also make a zip file containing that boot.img and flash via twrp if you don't want to use the fastboot method.
Related
Hi
need help how to run zip file in flash tools 2.91.
Is it posiable to install rom through flash tools avoiding recovery?
Thanks
nbkhan said:
Hi
need help how to run zip file in flash tools 2.91.
Is it posiable to install rom through flash tools avoiding recovery?
Thanks
Click to expand...
Click to collapse
flashtool its like SEUS, but better
it uses the same files/process as SEUS so the answer is NO
There are Custom rom's RainbowMod, Lumiatrix etc which are .nb files that can easily be flashed via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM
is there no stock roms that are .nb that could be flashed like that easily as I need to take me phone to a Care Centre and need to go back to stock rom?
You can download any official esco firmware, open *_boot.esco fipe as zip archive, extract boot.img, rename boot.img as blahblahblah.nb ad flash it via nss pro/lumia downloader etc.
kingcartwright said:
There are Custom rom's RainbowMod, Lumiatrix etc which are .nb files that can easily be flashed via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM
is there no stock roms that are .nb that could be flashed like that easily as I need to take me phone to a Care Centre and need to go back to stock rom?
Click to expand...
Click to collapse
download it from navifrim + !!!!
you can find the stock roms there
lucifer3006 said:
You can download any official esco firmware, open *_boot.esco fipe as zip archive, extract boot.img, rename boot.img as blahblahblah.nb ad flash it via nss pro/lumia downloader etc.
Click to expand...
Click to collapse
Thanks Alot Lucifer it work :good:
I think you should make a thread stating this and get it pinned
all tutorias are for E5823 but not for E5803
any idea?
Thanks!
guidosl said:
all tutorias are for E5823 but not for E5803
any idea?
Thanks!
Click to expand...
Click to collapse
Same exact phone. The only difference is that they made a separate software to sell in America to avoid being sued. Flash a e5823 ROM and get your fingerprint scanner.
download your STOCK ROM (FTF) file using FLASHTOOL>> XPERIFIRM
Extract kernel.sin as Kernel.elf using flashtool
re build / MODIFY your stock kernel using http://forum.xda-developers.com/xper...el-dm-t3301605
download supersu and put it in sdcard
- flash the modified kernel (fastboot mode in flashtool)
- boot the device, goto twrp, flash SUPERSU from sdcard.
Reboot.
DONE
orr send me your KERNEL.elf file for latest firmware , i will make for u
yasuhamed @ gmail .com
YasuHamed said:
download your STOCK ROM (FTF) file using FLASHTOOL>> XPERIFIRM
Extract kernel.sin as Kernel.elf using flashtool
re build / MODIFY your stock kernel using http://forum.xda-developers.com/xper...el-dm-t3301605
download supersu and put it in sdcard
- flash the modified kernel (fastboot mode in flashtool)
- boot the device, goto twrp, flash SUPERSU from sdcard.
Reboot.
DONE
orr send me your KERNEL.elf file for latest firmware , i will make for u
yasuhamed @ gmail .com
Click to expand...
Click to collapse
Right now i followed this tutorial
http://twigstechtips.blogspot.com.tr/2016/04/sony-z5-compact-root-without-losing-ta.html
But i get an error when i try to type "rootkernel kernel.elf kernel_patched.elf"
im on linux btw
ouenvian said:
Right now i followed this tutorial
http://twigstechtips.blogspot.com.tr/2016/04/sony-z5-compact-root-without-losing-ta.html
But i get an error when i try to type "rootkernel kernel.elf kernel_patched.elf"
im on linux btw
Click to expand...
Click to collapse
use command ....... " rootkernel kernel.elf boot.img "
then it will ask you many questions
disable sony ric
disable dm varity
install DRM Stimulation
install recovery
it will compress image and creat boot.img in the same folder.
now this is your modified kernel. from FLASHTOOL select fastboot mode, connect device, "select kernel to flash" , from drop downlist select .img file (the default selected is .sin)
and flash boot.img. , it will be flash in less than 1 sec.
disconnect, boot, on sony logo press volume up, goto recovery, flash SUPER SU / REBOOT
done you have rooted Beauty in your hands!
---------- Post added at 10:57 AM ---------- Previous post was at 10:54 AM ----------
by the way! you can Flash SUPERSU while modifying KERNEL also, if you put v2.78.zip file in rootkernel folder, the questionare will have extra question asking you "superSU found / Install? [Y/N].
but i wont recommend you, i found two problems if you install superSU directly in kernel
1. you cannot instal su updates lateron
2. batter life reduces.
so flashing SU from Recovery is the best!
Hello everyone.
I recently unlock bootloader and root my phone. I used flashtool with boot.img and recovery.img.
I want official latest software again. How can I find it?
Code:
https://developer.sony.com/file/download/open-source-archive-for-26-3-a-0-140-26-3-b-0-140/
As you can see, I found this page but I downloaded .tar file; not .img file. Besides, it is only one file; how can I find two files like boot.img and recovery.img?
I am new at these things and I could not solve it. Can you help me?
Thanks for advance.
You need to use flashtool. Download latest stock rom (official ie os6.) approx. 1.8gb file. Then connect your device to flashtool. Open a tutorial video from youtube to flash your device to latest stock rom. You need to take a nano backup of system and data. And then enter twrp and wipe cache, system and datav. And then flash
How should I install an original Huawei rom , no brand, downloaded from their cloud?
The name file is: ATU-L11C55CUSTC55D1B150 (8.0.0.150).zip
the ROM is a .zip with the files in the photo inside:
I tried the procedure to extract the update.app file and put it in the dlod folder of the SD card, but it does not install.
I have the privileges of ROOT and I have unlocked the bootloader, I can not install the
* TWRP Recovery.
Help!
since it is not possible to install the ROM version "update.APP", unzipping this with "HuaweiUpdateExtractor", which files should I flash with fastboot in bootloader mode?
Is this possible?
Yes, use the HuaweiUpdateExtractor and flash the system.img with fastboot.
Best regards
Yes, use the HuaweiUpdateExtractor and flash the system.img with fastboot.
Best regards
which files should I flash?
you need to download the full rom, go here: https://www.mobileheadlines.net/download-huawei-y6-2018-firmware-files-all-versions/
download the FullOTA-MF for your model and extract the zip, after that use huaweiupdateextractor on the update.app and extract SYSTEM.img
reboot into bootloader and flash the extracted SYSTEM.img to your phone using fastboot flash system SYSTEM.img
please make a tutorial thread. i want to use the original rom too.
Fakkurai said:
you need to download the full rom, go here: https://www.mobileheadlines.net/download-huawei-y6-2018-firmware-files-all-versions/
download the FullOTA-MF for your model and extract the zip, after that use huaweiupdateextractor on the update.app and extract SYSTEM.img
reboot into bootloader and flash the extracted SYSTEM.img to your phone using fastboot flash system SYSTEM.img
Click to expand...
Click to collapse
I tried and despite the flash of fastboot is successful I always find myself with the original TIM branded ROM, I do not know what else to do!
henryxp said:
I tried and despite the flash of fastboot is successful I always find myself with the original TIM branded ROM, I do not know what else to do!
Click to expand...
Click to collapse
there are paid rebranding services, which can work for qualcomm based devices
mutahharbashir said:
there are paid rebranding services, which can work for qualcomm based devices
Click to expand...
Click to collapse
yes I know, there's a guy, the one who gave me the bootloader code, that wants $ 20 to debrandize it, too much for so little ..