Related
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off) - UPDATE: I see now this one will not work in the HC OS as the system requires user interaction to set GPS
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Never heard of that but it sounds like an awesome app
Sent from my Transformer Prime TF201 using xda premium
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Haven't gotten my Prime yet, but that Tasker app sounds pretty cool. It sound kind of like JuiceDefender, except there's a lot more options.
With those settings, what kind of Battery life do you get?
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Lock-N-Load said:
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Click to expand...
Click to collapse
That's epic.
Sent from my Transformer Prime TF201 using xda premium
Tasker is pretty awesome!
A bit of a learning curve, but once you figure it out, the sky is the limit.
I have a profile that if I receive a text while driving, it autoresponds telling the person texting and driving is dangerous and I am currently driving at xx MPH and will get with them later.
I get a lot of people inquiring about that one.
The most useful one I have is it looks at my calendar and if it is during the time of my meeting, it automatically puts my phone on vibrate. That way I don't have to worry about it. When meeting is over, it reverts back to normal.
Yes, tasker is INCREDIBLE. Once you figure it out, it can almost double your battery life (at least it did on my phone).
You can try reddit.com/r/tasker, where most people post awesome tasker profiles and ask for help accomplishing certain settings. There are also a ton on the internet if you google search for tasker set-ups:
http://tasker.wikidot.com/profile-index (this is a great one)
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Tasker is one of the defining differences between ios and Android. Really shows off how powerful android can really be if you're willing to take the time
OP wanna post your profiles? And maybe a quick writeup (or link) how to apply them for those who dont know...
I used to use tasker for BLN to enable notifications from various apps that normally didnt work with BLN, as well as making my phone vibrate every minute or so if theres a missed notification (text, etc) for aprox 5 minutes just so that way if i was with a customer at work (retail) i could deal with the customer but wouldnt forget about the messages i got
Awesome app indeed.
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
Put a small SD card in the dock. Have Tasker check when it mounts/unmounts.
Might not work since there's no notification on unmounting /Removable/SD. Maybe have it check for access to /Removable/SD every X minutes?
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
if you are rooted, keyboard manager is a free app in the market that does this. when im not docked, i gvet thumb keyboard 4. when i am docked, asus stock. hasnt failed me yet
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
I have 4 profiles that I copied from my phone to do the same tasks:
Home: When near my Home wi-fi AP, turn on wi-fi. When no longer near the AP, turn off wi-fi.
Sleep Mode: Put device on silent, turn on airplane mode (11PM-5AM).
Work Location: When near my office wi-fi, turn on wi-fi, turn on silent mode. When no longer near the AP (i.e. not at work), turn off wi-fi, turn off silent mode off.
Work Timer: During work days/hours (M-F 6-3), turn silent mode on. After work hours, turn silent mode off. Exception: if there's an event with a description of "Vacation" on the calendar. If that exists, device does not go into silent mode.
There are others that I use on my phone.
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
BRILLIANT! I have actually seen no use for tasker for myself til now. I've always REALLY liked he concept, but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
stretchwookie said:
but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
Click to expand...
Click to collapse
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Lock-N-Load said:
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Click to expand...
Click to collapse
i understand how powerful this tool can and is. but i shut my prime off at night... there is no battery to conserve... lol sorry. im glad it works for you guys though! it REALLY may be worth investing the money into though JUST for microsd unmount alerts.
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Lock-N-Load said:
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Click to expand...
Click to collapse
i believe you are correct. but i am not very imaginative. so its very possible that i cant just find a use for it, doesnt meant that it isnt there. i plan on doing some research into some of the already made profiles to see if someone interests me. so far, the unmount microsd seems to be the only plausible for me
Not sure how I missed this thread before; I'm a huge fan of Tasker. All of what follows was written for my Samsung Epic 4G: I don't even have Tasker installed on my TFP because so much of what I do is smartphone-focused. Sooner or later I'll get around to putting together some tablet-specific scripts.
Surreptitiously snaps a photo from the front-facing camera every time the screen is unlocked, with no visual or audio indication. This is set up so as to always keep the last 2 photos stored, and will overwrite older photos. Images can be retrieved remotely via a secret text message.
Set up secret text messages that trigger the phone to gather information such as GPS location (reverse geocoded to an address), speed, heading, altitude, local cell tower ID and signal strength, nearby and connected WiFi SSIDs, WAN IP, currently open app, whether the screen is turned on, battery strength, and covert photographs taken from the front and rear cameras (including the one that was captured from the front camera when the screen was last unlocked) and text/email me back without notifying whomever has the phone. Another message will make my phone freak out, announce it's been stolen, announce that all of the above information has been sent to the owner of the phone, flash the LED in an SOS, and force all outbound calls to go to me.
If I send a secret message to my phone, it calls me back, and enables speakerphone, so I can speak with whomever has my phone. It also reroutes any outbound calls to my number. I can also ask it to send me photos from the front and rear cameras on the phone.
Ensured that when the phone is connected to my home's local cell tower, it always rings when I call it. I never have to worry about it being on vibrate while under a couch cushion or in a snowbank next to the driveway.
When I plug in a headset or it connects to my car's bluetooth, it pops up a list of media applications for me to use, and if I don't select one or back out of the selection, it automatically starts my Pandora, and kills the app when I unplug / disconnect. Basically, I get in my car, my music plays. I get out, it stops. Same with headphones.
When it detects the cell tower near my work, it enables vibrate.
If it detects a cell tower that is not the one near my home or work, it turns on the ringer and disables WiFi (unless I re-enable it).
If someone calls me that I don't even want a voicemail from, I add their number to a list in Tasker, and when they call me, it picks up the line and immediately hangs it up. Working on one that will play back a fake "Your call could not be completed as dialed" message.
Checks accuweather.com in the morning on work days to see if it's raining, snowing, sleeting, or hailing. If any of the above, it rings an alarm 30 minutes early. I also built in snooze functions and a voice notification in the morning about the outside temperature and conditions. This script recently broke (accuweather probably did something to affect the output of my HTTPGet) so I've been using the voice notification in Alarm Clock Plus, though it doesn't wake me up early. With current weather conditions I'm going to have to get my script fixed for the head start. My how-to on this script is on Tasker's wiki, here: http://tasker.wikidot.com/weather-clock
If I start Google Navigation with GPS disabled, it closes the app, enables GPS, and starts the app back up again. No more fiddling with GPS settings while on the go. Sometimes this script is not 100% reliable... I've got to look at it again some time to figure out why.
I made a blog post a while back about how to take the pictures remotely with the camera, and you can read about it here:
http://sean-the-electrofreak.blogspot.com/2011/10/more-fun-with-tasker-covert-mugshots.html
The email-attachment part can also be used to send audio recordings, which I've not actually implemented yet but wouldn't be difficult.
I've been putting off for the last 6 months or so my write-up on all the rest... I just have to find time for it!
Im looking for a Android powered GSM phone that will automatically turn itself back on if the battery is dead and power is reconnected.
I want to stash this in my vintage automobile and use tracking software to locate the vehicle in the unfortunate event its stolen. The only issue I need to solve is if the battery dies and the phone turns off how to turn it back on automatically. I plan to put the device in the door panels so access will be difficult.
Does anyone know of a phone that does this?
Not sure where to post a question like this so I figured I'd start here.
psychoholica said:
Im looking for a Android powered GSM phone that will automatically turn itself back on if the battery is dead and power is reconnected.
I want to stash this in my vintage automobile and use tracking software to locate the vehicle in the unfortunate event its stolen. The only issue I need to solve is if the battery dies and the phone turns off how to turn it back on automatically. I plan to put the device in the door panels so access will be difficult.
Does anyone know of a phone that does this?
Not sure where to post a question like this so I figured I'd start here.
Click to expand...
Click to collapse
Please check NoMoarPowah! app from Chainfire - https://play.google.com/store/apps/details?id=eu.chainfire.nomoarpowah&hl=en
NoMoarPowah! can automatically reboot into Android when charging is done. Either when fully charged, or when the battery level reaches 15% and Android has enough juice to run.
The app is known to work on the following devices -
Tested on the following devices:
- Samsung Galaxy S (I9000) and family
- Samsung Galaxy S2 (I9100) and family
- Samsung Galaxy Tab 7" (P1000) and family
- Samsung Droid Charge
- Samsung/T-Mobile Sidekick 4G
- Samsung Continuum (ticker overlaps)
Awesome thank you!!
Kind of a useless app, since you have to select your option each use. May as well just plug in and power up.
Note 2 > Deodexed Stock ROM > Tapatalk 2
you should try with Tasker (but that's not a free app, unfortunately)
Car Charging
Intelligent Approach,
I have also did the same thing but with some alteration and continue improvements to it for my vehicle security, i also did the same but putted the phone in dashboard and connected it to car cigarette lighter socket internally,(simple wiring), whenever car starts, it will start charging and Battery Booster apps Prevents Overcharge.
But currently i have hidden my Phone Near Speakers at the Back, and integrated it with Car Key less entry Remote (Car Security), so when ever some Opens my Car Doors, Car security Sends 12v Current to Siren as well as Car Charger that is connected to Mobile.
My Mobile is Programmed using an simple App that Call my Phone Number whenever It detects "Car Charger Connected" Event.
In short I get informed by my car in case of Un Authorize Access simple.
Keep it Up.
Anjum
how do you detect car charger connected event programmatically?
hi greatanjum,
thanks for your interesting post.
how do you detect car charger connected event programmatically?
could you please post a source code snippet about this?
Thank you
silvio
P.S. : I think I've gotted myself ... Using BatteryManager and its BATTERY_PLUGGED_* and EXTRA PLUGGED ...
Am I right?
psychoholica said:
Im looking for a Android powered GSM phone that will automatically turn itself back on if the battery is dead and power is reconnected.
I want to stash this in my vintage automobile and use tracking software to locate the vehicle in the unfortunate event its stolen. The only issue I need to solve is if the battery dies and the phone turns off how to turn it back on automatically. I plan to put the device in the door panels so access will be difficult.
Does anyone know of a phone that does this?
Not sure where to post a question like this so I figured I'd start here.
Click to expand...
Click to collapse
if you flash TWRP and turn your phone off soon as it is connected to a charger it will boot into recovery, with that being said you easily the partition it boots into from recovery to system
i know this is a tad old post but it was near the top of google search so others may still find this thread useful
but samsung galaxy europa (its quite old and cheap £/$20 or less unlocked and locked) phone seem to work well for me only modification you have to make to the phone is the power button needs to be held down (at the start i used a clamp or large paperclip), so soon as power is received it turns on even after full power drain as when the charger is powered up it starts the auto charge which then checks the keys and sees the power/hangup button is pressed (power button is ignored as long as its left constantly held down so it not turn off) o and make sure sound is set to silent or the low battery warning will blaring away when it is running low (i do believe there is a extended battery you can get for the phone as well)
i use FollowMee for tracking and wheresmydroid as backup (has sms keyword triggering) FollowMee me never failed me) only issue is you need lots of account with wheresmydroid if you have more then 2 devices (assuming you want to use it to track via website if not the SMS keyword GPS one off tracking can be useful and it will use google WiFi Geolocation if GPS fails to work and a wifi access point is in range and you have mobile data) FollowMee does have a one off $3 or $6 payment for full 15-30 day history unlock (but works fine as free as well but will only show one current location at a time no history)
and disabled all automatic updates on google play (make sure you open google play a number of times with 5 minute delay between each open so it installs the newer version and let it update or it might get stuck in a loop and eat all mobile data) on the phone and push updates so only the app uses data (you could probably get away with a M2M sim as well), also set the phone to 2G only as 3G is bit flaky on samsung phones and 2G uses nearly no power as well
Guys,
Lot of talk regarding battery life/ standalone/ accuracy of gear S apps for running.
Used both Nike and S Health- to me both were standalone.
Few bullets
1) some stated that even with GPS on and locked that s health still uses pedometer for distance? (is this true?)
2) I'm still confused if I need gear network AND/OR mobile network on/off - does this affect battery life- if I leave OFF all networks...will my run sync once I turn mobile network or Bt with phone on?
3) any way to get splits read to you (cannot believe this is missing)
4) I don't think this device will get through a marathon unfortunately
Yikes! Just did the car test (run shealth with hand out car) and I can confirm that it doesn't use gps for anything other than map. Feel duped
Relies on pedometer I think
Sorry for my blast posts. It is possible that it only records speeds in running range? I shook hands and didn't increase speed. Also noticed a bike option. Perhaps wrong about duped. Lol
Hello Jeffruby,
I've been in contact with Samsung about S-Health on Gear S and they confirmed that they are not measure the distance with the GPS, just the map (Totally insane!)
The Nike+ app is tracking the distance correctly with GPS though. If you have everything turned on (GPS, GSM, Bluetooth), then you would get probably about 4-5h of battery time. My goal is to use it on the next marathon and be able to listen on music for the last 60min of the race but i guess I need to run on 3:30 or something to make this possible
BUT, unfortunally the Nike+ app are missing the most important thing and that's the avg pace for the total run. It just show current pace and I don't really like that since it's changs so often so it's hard to see what speed you are runnig at.
So, yeah, I really hope for an update on either of these running apps ASAP!
HTC, thanks.! What a shame re s health app. How do you think it does distance for biking though if uses pedometer for distance?
The Nike app is close to being good..... I can't see the red on black, while your running you can't read scrolling info and of course the avg pace of run is the gold
Also in Nike app you have to turn on GPS manually, not from the app, if you want to track distance accurately. If you don't it uses accelerometer. With GPS on in general battery life is not good. My longest run was 30K in 2:45 had 18% battery left. Also there is one more strange thing about S health - calorie count maxes out at 1000
OK , so I did another test today - used shealth on bike mode. Stuck arm out car window with GPS on. Kept arm still. It tracked distance completely accurately. This tells me that the s health must indeed use GPS accurately. I think the jog portion only measures speeds in running or walking rates as it did not pass my car test.
The Nike app is a bummer as you can't verify GPS lock before it starts. Also the reasons mentioned prior.
The s health app is easier to read but doesn't show you 1 mile splits on the phone app. This is unacceptable.
Completely agree with the issues mentioned with nike+ Visual gps status before starting, the ability to display the info you want while running, and a always on mode during use would also be handy. Now I have to flick my wrist and wait untill the display goes on. It takes too much time and you're not seeing what's happening before you. A quick glance should be all. Currently i use a gear store app called screen awake for this.
Yeah, i have been logging miles with the Nike ap too. Its not perfect, but it works for me.
I have 79 miles all logged on my Gear S nike ap this year.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Not to mention Nike app wastes battery with hr but doesn't record it.
The S Health app records continuous HR during your run. I'm not sure how the Nike+ app works to record HR data. Is it continuously tracking/recording HR data? Or does it do it intermittently when you activate the display and wait for the information to scroll (on the bottom of the screen) to HR?
glenner05 said:
Completely agree with the issues mentioned with nike+ Visual gps status before starting, the ability to display the info you want while running, and a always on mode during use would also be handy. Now I have to flick my wrist and wait untill the display goes on. It takes too much time and you're not seeing what's happening before you. A quick glance should be all. Currently i use a gear store app called screen awake for this.
Click to expand...
Click to collapse
In the Nike+ app there's a small round indicator in the upper righthand corner that turns green as soon as there is a GPS lock. Always on mode is great, but it increases battery drain, so I just do the wrist flick.
Jerome, I think he is referring to indicator if Nike gps locked in before you hit start run. No runner wants the first 0.1 mile not to be recorded.
htcdiamondswe said:
Hello Jeffruby,
I've been in contact with Samsung about S-Health on Gear S and they confirmed that they are not measure the distance with the GPS, just the map (Totally insane!)
Click to expand...
Click to collapse
Could it be that the person you talked to had no idea what they were talking about (my usual experience with samsung, sadly)?
I am asking because Gear S tracks distance even with data off. After the run, if i don't see a map, only a track of my steps(*), I think data was off, but I still get the same results. I took mine to Europe with me and still got the distance tracked on my runs, even though the SIM card in it wasn't working. Wouldn't that be a sure indicator that what Sammy told you is incorrect?
(*) when data is on, my tracks are superimposed over a map.
xendula said:
Could it be that the person you talked to had no idea what they were talking about (my usual experience with samsung, sadly)?
I am asking because Gear S tracks distance even with data off. After the run, if i don't see a map, only a track of my steps(*), I think data was off, but I still get the same results. I took mine to Europe with me and still got the distance tracked on my runs, even though the SIM card in it wasn't working. Wouldn't that be a sure indicator that what Sammy told you is incorrect?
(*) when data is on, my tracks are superimposed over a map.
Click to expand...
Click to collapse
Hello,
I guess I have to answer both Yes and No on that question
I've tried to reinstall, run without data, without simcard, yeah, tons of different test and it's always way off (map is accurate but the distance it shows is totally off). Another poster in this topic also had the same issue but then he told me to test and choose 'cycle' as training mode instead of running, and, when I did that, then S-Health tracks the distance accurate. So, with other words the application have support for tracking distance in that training mode but of some reason it seem to choose to track the distance by counting steps if I choose running/walking as training mode. So, i'm not sure, maybe your device of some reason have this working on all traning modes. I hope so, and, that someone can explain for me hoooooooooooooooooooow to change this
My gear s tracks distance very accurately when I run gps on. However with GPS off using pedometer it overestimated my distance by approx 0.1 per mile. So gps must work. I did discover as mentioned above, that at high speeds need cycle on.
Not sure if this has anything to do with anything, but my Gear S is the US ATT variety.
In my case, I am fairly certain that no maps are used for measuring distance. Maybe I lucked out.
And when I said my distance gets tracked earlier, I meant the tracks you see at the very bottom of the log in S Health, that correctly display where I took turns, looped back, etc. Without data on, there is no actual map behind them, with data on, there usually is (I had a few flukes before.) The pedometer would not know about turns taken, though.
BTW, I had issues getting a GPS lock for a while until I realized that my phone is messed up. Once I started using the Gear S in stand-alone mode, all was good.
Hello All. I've been searching this and other forums for an answer for several hours now, and haven't found one yet. Any help is appreciated. Just got a Gear Fit, and have it linked to my Galaxy S5. S health, Gear Fit manager, and watch are all updated to latest versions.
1) Heart Rate Monitor. I used the HRM on my S5 while working out on occasion, but found it useless due to the need to turn it on to get a one time reading. Part of the reason I got the GF was to have the Heartrate monitor. Unfortunately, it operates like S-health does on the S5. I have to turn it on to get a reading. Is there a 3rd party app that I can use to consistently monitor my Heart Rate while working out (so I can just glance at my watch and see it). Even better, one that notifies you if your HR goes higher or lower than desired?
2) Sleep tracker - is there an App that will autodetect sleep with this watch? I constantly forget to turn the sleep mode off, and end up with much longer sleep segments than I actually have (i.e. I take the watch off when showering and getting ready in AM, don't put it on till I leave for work, and end up with 45min-1hr more of 'sleep' tracked.
Thanks much!
For part 1 of your question - There is an exercise mode on the samsung gear fit which constantly monitors your heart beat.
Not sure about the second part though I have the same problem - I wish it did like the phone does and identifies when I am awake based on my movement also it would be good if S-Health allowed me to modify sleep time after recording - not sure if it can now.
I have the Xiaomi Amazfit Stratos watch, which worked well with my old Mi A1. However, since getting the Poco F1 notifications to the watch do not work (unless the app is open in the foreground). In addition, the VW Connect app (also a background app that uses GPS and connects automatically) did not pick up any trips made since using pairing with the new phone....
This made me think it was something to do with the MIUI battery saver settings. Since then I have changed the settings on both these apps to 'No restrictions' and it has made a slight improvement (I would say about 50% of the notifications are making it to the phone now). So I am at a bit of a loss now....
You would assume that a smartwatch made by Xiaomi would work seamlessly with a phone of the same manufacturer.... but it seems not!
Any ideas would be much appreciated.