Hello guys,
Today I flashed 4 files firmware to my A10s (A107F) now it's neither turning on nor going to download mode,
and when I connect the phone to my pc,
It connects mediatek preloader USB VCOM and disconnect it after 2s and repeat that again and again.
Related
Hi everyone,
I tried flashing a new rom on my Goophone N3+ (i think it's a MTK6592), but something went terribly wrong and now the phone doesn't boot.
I can't even access the recovery mode or the download mode: the phone just won't turn on.
I tried connecting it to different computers with different cables, but it's always recognized as an "unknown device".
Is there a way to unbrick it, or at least make my pc recognize it?
Thank you in advance and sorry for my poor english.
Remove battery, plug phone on USB and check for COM port in device manager.
If there is a COM port for only 2 seconds, there is unbrick possible.
hi everyone
i'm really fedup from my phone
i have 3 sam phone Galaxy s ,
young and star
the star is bricked i can't enter
recovery mode the phone stuck on
start i can only enter the download
mode but phone not detected by
pc and odin even i have update the
driver and used a three usb cable
that work on my Galaxy s without
error
the same for my Galaxy y is not
dtected by pc i have all driver
installed but the phone work
normaly without problm only usb
when i plug it it chareg only
Flash a firmware...or Flash a rom
.if u able to boot into cwm..
Hi,
I have infinix hot note pro [mt6592] 2 GB ram+16 GB rom version. I somehow bricked it while I was flashing custom recovery. Now my device isn't turning on but it is connected with my PC as usb preloader but it is not dectected by SP flash tool so that i can flash stock rom. USB DA drivers are not being installed, when i install them then error comes that this device cannot start. And my mobile isn't detected by pc as any other mediatek usb device, it is just connected as USB preloader vcom device. Please help me. I'll be very thankful. Please :crying:
Aoa.Check your inbox.
Hi, my device suddenly stopped working, I kept it to charge over night and in the morning, problem started
So i ordered a new battery but still nothing.
I think that phone is bricked
Simply no response, twrp or fastboot, nothing
The problem is that i need my data from the phone, i have set backup every friday it hapened in thursday - so i will loose som of my data
What i should use? SP flash tool or MI flash tool, or chinese miracle?
Repair me if i wrong with something.
When i unplug the battery. phone will connect to PC but after few seconds it will automaticaly disconnect,
I've installed Mediatek DA USB VCOM drivers - but there is yellow triangle when i connect phone to PC it will recognise it as - Mediatek USB port
Thanks for any help.
Hi guys, I bricked my RN3 (Snapdragon) today after flashing an incompatible file (probably), now it doesn't switch on nor go to the bootloader. Just the LED blinks red on connecting USB which means it is on EDL mode (right?) So, I've searched and found similar problems with recommendations of the tespoint method and the deep flash cable. But the problem is everyone sees that PC detects as a Qualcomm device either in Diagnostics mode or the other but mine shows up "Unknown USB device". What can I do from here? Please help
PS: I'm on Windows and driver signature is disabled only.
Reinstall drivers, try different pc