On my huawei p20 lite (ane lx1) I cannot open the factory reset menu.
The phone is off. I press and hold Volume Up and Power until the EMUI logo appears. Then there is only the message:
Software install failed
Get help from: h good:tt p :good: / / www .:good: emui. :good:com:good:/emotiondownload.php?mod=restore
Reboot system now
Click to expand...
Click to collapse
The page h good:tt p :good: / / www .:good:emui.:good: com/emotiondownload.php?mod=restore does not exist.
What can I do in order to reset (no access to OS obviously)
Related
I got a slight problem with my MediaPad 7 Lite. This is what I tried:
1. Shutting it down with USB Debugging enabled.
2. Restart tablet to fastboot mode by holding volume up and power buttons
The result:
It shows an Android Logo (Yay Recovery?) and then says "Rebooting..." and restarts normally.
Any solution to get into Fastbootmode / Recovery?
?
you cannot do that unless you do flash custom recovery... What do you want to achieve anyway?
pogs24ever said:
you cannot do that unless you do flash custom recovery... What do you want to achieve anyway?
Click to expand...
Click to collapse
Can u plzz tell u how to flas recovery, becose you cant flash it if u are not in fastboot (i think so).
TNX
Diazz72 said:
Can u plzz tell u how to flas recovery, becose you cant flash it if u are not in fastboot (i think so).
TNX
Click to expand...
Click to collapse
Its risky because they not perfected it yet... There's a chance that you might brick your tablet...
You might wanna check this Russian Website link
Use chrome and translate
Mediapad 7
I also got the same problem. I got a Mediapad 7 Youth (Brother of Lite) and I cant access the recovery mode nor the fastboot mode. I tried to download CWM Recovery Manager but nothing happened It still skips and reboot. By the way I would like to flash a custom recovery but I cant find any can u please help me/us?
hi
I just tried a couple of methods of getting into stock recovery myself for the mediapad 7 lite both get same error message
fail.....reboot needed
long press power to power off.
2) at another site I found the possible reason......
power + vol up + vol down until tablet vibrates
release power and hold vol up
--- it expects to find an update image on my sdcard ....which currently I don't have.
hope that helps
I have yet to test putting an official upate on sdcard and when normal boot......update from huawei site thru system settings says no updates needed.
Thank you for reading this.
Yes i know this is a common problem with alot of easy fixes, but it is a bit different in my case.
Please Read:
My device is rooted, i was installing an app that tweaks performance which needed drivers to be downloaded / installed. As soon as i clicked that driver download / install button the device immediatly shut down. Now i'm stuck on its boot logo (Its a Chinese tablet powered by a RK3066 Chip / android 4.1.1) I tried (Holding power + volume down) = Dead android logo with red exc. mark on top / (Holding power + volume up) = Nothing / (Holding power + both volume up and down) = Dead android logo with red exc. mark on top / (Leaving dead android logo for a couple of minutes) = resets and logo is still stuck.
I have no custom anything . I did not do anything with the root except download apps.
I also do not have linux.
When the tablet is plugged into the PC when the dead android is displaying , it detects, but that is it, i cannot browse it what so ever.
All recovery methods in the tablet are (dead android logo)
Help?
If I'm not mistaking all these rockchip tablets use lievsuite to download stock firmware, is there a small pinsize hole on it (other than a mic) this often gets you to the download mode and you would need the factory firmware from OEM website
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
If I'm not mistaking all these rockchip tablets use lievsuite to download stock firmware, is there a small pinsize hole on it (other than a mic) this often gets you to the download mode and you would need the factory firmware from OEM website
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
i have rk3066 tab too, called treq turbo in indonesian, bootloop becouse that driver not suitable with your OS ar Chipset like chainfire app, try to flash rom again
when you say flash rom, im to that point after reflashing my recovery via odin would all i have to do is reinstall the rom to recover? or would i have to recover original system first the apply the new rom
Hello Guys,I have a Huawei G700-U20 and i can't fix it. when i press power on there is only HUAWEI Logo and it's looping. i tried Power + Volume Down,but there is only black screen and message New:safe Old:risk. I also tried Flashing with Smart Phone Flashing Tool i have a windows 8 and Com Ports not support them. Please if somebody know how to fix,help me
6120
norequest said:
Hello Guys,I have a Huawei G700-U20 and i can't fix it. when i press power on there is only HUAWEI Logo and it's looping. i tried Power + Volume Down,but there is only black screen and message New:safe Old:risk. I also tried Flashing with Smart Phone Flashing Tool i have a windows 8 and Com Ports not support them. Please if somebody know how to fix,help me
Click to expand...
Click to collapse
help me please
Hi,
I bought lenovo tab 2 A7-10f for my brothers birthday.
After one week of using it he brought it back to me with words: I broke it.
He rooted (Kingo software) the Android system and than he cleaned some system apps which caused the crash of the system.
Now when I start it the boot stops in lenovo welcome animation and I can't get to boot mode anymore (pushing volume and start button) the system freeze in welcome screen with lenovo and android logo - no martian.
When I tried to connect by ADB the device appeared to be "offline" and I can't reach it.
Can you help me, please?
OS ANDROID 4.4
CPU: MTK 8127 QC 1.3GHZ
You need lenovo flash tool and latest rom. T2-A7-10F_USR_S041_150112_ROW or another.
power off your tablet.
push volume down and connect with your computer.
tablet will start and show he is charching.
Start flash tool. load the scatter file. In above rom it is : MT8127_Android_scatter.txt
once loaded push download.
some files will go to your tablet. If flash tool quickly stops , power off your tablet, but leave the usb cable.
Once powerd off , flash tool will continue.
when het is finished , you will see this on your computer.
disconect and restart tablet.
2nd possibility : power off you tablet
hold 3 buttons. Poweron , + and -
when tablet vibrates , release powerbutton but do not release + and - button
now your tab will start in recovery. here the tab says : no command and you push the powerbutton to see the menu.
there you can choose : wipe data/factory reset
after reset choose to reboot.
if this factory reset does not restore you tab , you must flash the rom.
choosing with keys :
with - button you go down
with +button you select
with power button menu will show
Can someone help me with a link to the stock rom ?
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Try resetting the phone from recovery.
Enter into recovery(use possible combinations of power+vol up or power+vol down or power+vol up+vol down) and factory reset the phone. This might help.
danstermadman said:
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Click to expand...
Click to collapse
I was asking for a way to download the stock rom for lenovo. now i got both a smartphone and a tablet from lenovo.
edit: when i try to us e the method showed by stevencumps,nothing happen. is there a posibility to flash the rom via stock recovery ?
danstermadman said:
Try SAMmobile.com (you will have to make a free account) when you have made your account click the firmware button at the top of the screen then type in your phone model number. For example SM-G361F the choose your country. Then in the filter box seach your network provider ie. O2 then click download. Once you have downloaded it unzip the file in a folder. Boot your phone into odin/download mode. Click BL or AP it dosent really matter then choose your file and wait for the blue bar on your phone to finish. Then it should restart
And should be stock rom. If your brick your device please note you have full responsibilty over your device. If you do mess up and brick your device just repeat the steps above.
Click to expand...
Click to collapse
That's amusing. they have a lenovo tablet and you're telling them to look for their stock firmware on a site for samsung devices and to restore the device with a program that is made for samsung devices, lol.
Rom original zip for upgrade to lollipop tab 2 a7 10f
honzasasak said:
Hi,
I bought lenovo tab 2 A7-10f for my brothers birthday.
After one week of using it he brought it back to me with words: I broke it.
He rooted (Kingo software) the Android system and than he cleaned some system apps which caused the crash of the system.
Now when I start it the boot stops in lenovo welcome animation and I can't get to boot mode anymore (pushing volume and start button) the system freeze in welcome screen with lenovo and android logo - no martian.
When I tried to connect by ADB the device appeared to be "offline" and I can't reach it.
Can you help me, please?
OS ANDROID 4.4
CPU: MTK 8127 QC 1.3GHZ
Click to expand...
Click to collapse
HERE YOU GO
I am not sure how this works but this is the downloable file any tablet tab 2 A7 10F gets when it's going to upgrade from kitkat 4.4 to lollipop 5.0 so I guess this will work on any of your tablets. This versión is supposed to be for latinamerica but It holds many languagues if any of you need others than Spanish or English.
This is the link, join the lines
just to avoid being banned
h
t
t
p
s
:
/
/
drive.google.com/
file/
d/
0B0M2L15KUCM2OXdITzZ2YWVPWUk/
view?usp=sharing
---------- Post added at 02:36 AM ---------- Previous post was at 02:31 AM ----------
HERE YOU GO
I am not sure how this works but this is the downloable file any tablet tab 2 A7 10F gets when it's going to upgrade from kitkat 4.4 to lollipop 5.0 so I guess this will work on any of your tablets. This versión is supposed to be for latinamerica but It holds many languagues if any of you need others than Spanish or English.
This is the link, join the lines
just to avoid being banned
h
t
t
p
s
:
/
/
drive.google.com/
file/
d/
0B0M2L15KUCM2OXdITzZ2YWVPWUk/
view?usp=sharing
Droidriven said:
That's amusing. they have a lenovo tablet and you're telling them to look for their stock firmware on a site for samsung devices and to restore the device with a program that is made for samsung devices, lol.
Click to expand...
Click to collapse
My twrp is very slow. İs this normal? Bad eng sorry
the situation is today can update to 5.1.1 Mine meal with TWRP . but due to the fault can not get up to send a message . XDA load on the table so I preprooted ( flashable - prerooted Z3V with mods.zip 5.1.1 ) . then reboot into TWRP his actions : wipe > advance wipe > click : davik cache , system , cahe . wait for it to run is complete, select the file to install Z3V flashable - prerooted 5.1.1 with mods.zip had put in the memory . ok but it does not install dc error .
then restart the computer hangs at the SONY logo . fim1 pressed his source + volume ( - ) , the entry into the system recovery dc something few lines
Power up continue
safe mode
power dow
factory reset
dow only power line is always turned off the machine while the other lines also restart and hang SONY logo .
. do you know how to fix it yourself with only .
songphuongnet said:
the situation is today can update to 5.1.1 Mine meal with TWRP . but due to the fault can not get up to send a message . XDA load on the table so I preprooted ( flashable - prerooted Z3V with mods.zip 5.1.1 ) . then reboot into TWRP his actions : wipe > advance wipe > click : davik cache , system , cahe . wait for it to run is complete, select the file to install Z3V flashable - prerooted 5.1.1 with mods.zip had put in the memory . ok but it does not install dc error .
then restart the computer hangs at the SONY logo . fim1 pressed his source + volume ( - ) , the entry into the system recovery dc something few lines
Power up continue
safe mode
power dow
factory reset
dow only power line is always turned off the machine while the other lines also restart and hang SONY logo .
. do you know how to fix it yourself with only .
Click to expand...
Click to collapse
You are only supposed to do all of the wipes and everything BEFORE you flash any ROM. You wipe after flash means your phone has no operating system, and you have to use Flashtool and flash a stock rom to work with.
I was facing trial versions
23.0.E.0.376
23.1.D.0.059
23.4.B.0.319
3-4 error is flash feature line , then restart dt keeps crashing .
use the PC companion not support this model . it asked to use the Software Upgrade Assistant verizon . Where do but Verizon Software Upgrade Assistant software . verizon always on site and did not find any download.
Further misery service center SONY Vietnam also no software support .
Probably not dispose of the phone now .
I live in Vietnam
Download a stock ftf file and flash it using the flashtool. You can find both files in the root guide posted before.
To use the flashtool plug your phone into your computer and hold both power buttons and the power button to put the phone into flash mode. When your phone is in flash mode, click the flash icon in the upper left corner of the flashtool and choose flash mode. Then choose the firmware to flash.