I have lenovo tab3 710i mt8321 its not booting so i need rom/firmware please give me rom/firmware of tb3 710i mt8321 and also flashing tool. THE tab is only vibrates on pushing turn on button and nothing appears on screen. please help
You might wanna take a look at this, as there are all the suitable custom roms listed.
Here's also a detailed guide on how to install Lineage OS 13 on Lenovo Tab 3 710i
eleven.co said:
You might wanna take a look at this, as there are all the suitable custom roms listed.
Here's also a detailed guide on how to install Lineage OS 13 on Lenovo Tab 3 710i
Click to expand...
Click to collapse
you replied but your given solution will not work my tab is only vibrating on pressing buttons (power on and volume buttons)and screen is black so please give another solution
please give reply @eleven.co
dummy1995 said:
you replied but your given solution will not work my tab is only vibrating on pressing buttons (power on and volume buttons)and screen is black so please give another solution
please give reply @eleven.co
Click to expand...
Click to collapse
When you press Power button and Volume down button simultaneously, does Lenovo logo appears?
eleven.co said:
When you press Power button and Volume down button simultaneously, does Lenovo logo appears?
Click to expand...
Click to collapse
no tab only vibrates for 10sec the short vibrate every after 5 sec and yes nothing appearson screen and also screen is not damaged
dummy1995 said:
no tab only vibrates for 10sec the short vibrate every after 5 sec and yes nothing appearson screen and also screen is not damaged
Click to expand...
Click to collapse
If nothing is popping on the screen, maybe you should take it to a service centre.
Related
OK, i feel like a real noob now :crying:
I tried to upgrade my P3100 to Slim-p3100-4.2.2.build.6-OFFICIAL following the tutorial i found.
Result of this is that now tablet is non more able to enter either CWM recovery nor odin download mode and after normal boot i can only see a flashing Slim logo on the right part of the screen.
The best i am able to obtain is a "forced upload by key pressing" screen rebooting with all three buttons pressed.
Odin can see the device but when i try to re-upload cwm is stits in Establishing connection.
All threads i found in this forum were about phones and nothing about tablets. Anyone can give me an hint on next steps i should follow?
Thank you all
ttr3n0 said:
OK, i feel like a real noob now :crying:
I tried to upgrade my P3100 to Slim-p3100-4.2.2.build.6-OFFICIAL following the tutorial i found.
Result of this is that now tablet is non more able to enter either CWM recovery nor odin download mode and after normal boot i can only see a flashing Slim logo on the right part of the screen.
The best i am able to obtain is a "forced upload by key pressing" screen rebooting with all three buttons pressed.
Odin can see the device but when i try to re-upload cwm is stits in Establishing connection.
All threads i found in this forum were about phones and nothing about tablets. Anyone can give me an hint on next steps i should follow?
Thank you all
Click to expand...
Click to collapse
A small update:
I also tried to disconnect battery for 4 hours, but still unable to enter in recovery mode.
When you reach the slim logo, keep holding the power key for about 6,7 seconds. You will hear a vibration, leave the power key and immediately press vol up and power key again(do these steps fast after the vibration). When the galaxy tab 2 screen comes leave the power button, keep holding the vol button. Now check whether you can enter recovery now.
Sent from my HTC One X+ using xda premium
ommnute translation
Siddharth121 said:
When you reach the slim logo, keep holding the power key for about 6,7 seconds. You will hear a vibration, leave the power key and immediately press vol up and power key again(do these steps fast after the vibration). When the galaxy tab 2 screen comes leave the power button, keep holding the vol button. Now check whether you can enter recovery now.
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
Thank you Siddharth121, i wil try as soon as i reach home this evening. I will let you know.
Thank you again
Pressing thanks makes ur thanks reach my heart. Hehe
Sent from my HTC One X+ using xda premium
ttr3n0 said:
OK, i feel like a real noob now :crying:
I tried to upgrade my P3100 to Slim-p3100-4.2.2.build.6-OFFICIAL following the tutorial i found.
Result of this is that now tablet is non more able to enter either CWM recovery nor odin download mode and after normal boot i can only see a flashing Slim logo on the right part of the screen.
The best i am able to obtain is a "forced upload by key pressing" screen rebooting with all three buttons pressed.
Odin can see the device but when i try to re-upload cwm is stits in Establishing connection.
All threads i found in this forum were about phones and nothing about tablets. Anyone can give me an hint on next steps i should follow?
Thank you all
Click to expand...
Click to collapse
this will help...
http://forum.xda-developers.com/showthread.php?t=1900055
http://forum.xda-developers.com/forumdisplay.php?f=1596 :fingers-crossed:
ttr3n0 said:
Thank you Siddharth121, i wil try as soon as i reach home this evening. I will let you know.
Thank you again
Click to expand...
Click to collapse
So, i tried tens of times, but nothing.....
flashing logo ---> power for several seconds till i head vibration --> as soon as i hear vibration leave power and faster as i can push vol up and power ---> release power as soon as Samsung logo appears ---> some colors on scree and slim logo again.....
Am i missing anything?
attached are photos of logo blinking
Nope. U didn't missed any thing.
U cant enter the recovery mode, must be a problem of recovery, try doing the same with power down, so that you can enter the download mode. Then odin can be used. Hope this works, and your tab becomes alive agan. All the best
Sent from my HTC One X+ using xda premium
i installed flashify onto my Huawei ascend mate 1, and install CWM. it asked to flash it, i pressed yes and it shutdown and won't boot normally, It's stuck on the logo mode.
if i press the power button for 10 seconds, it vibrates once before restarting normally and is stuck at the logo screen.
if i press volume - and power button simultaneously, same thing happens (note this is how i used to get into recovery mode before)
When i press the volume + and power button together after 10 seconds, it goes off and back on again Without the little vibration in the other cases, but gets stuck again
same thing happens when i hold down the 3 buttons all together.
i downloaded the stock rom from huawei's websit, put it into the dload folder and tried everything above 3 times. nothing happens.
i connect it to my computer for a chance to adb/fastboot, but in vain.
guys what can i do?
Hi, thank you for using XDA Assist. I'm going to move your thread here, http://forum.xda-developers.com/ascend-p6/ascend-mate where experts on your device can help you. You're probably going to have to flash the stock firmware on your device to get it working again.
jasonlarry.123 said:
i installed flashify onto my Huawei ascend mate 1, and install CWM. it asked to flash it, i pressed yes and it shutdown and won't boot normally, It's stuck on the logo mode.
if i press the power button for 10 seconds, it vibrates once before restarting normally and is stuck at the logo screen.
if i press volume - and power button simultaneously, same thing happens (note this is how i used to get into recovery mode before)
When i press the volume + and power button together after 10 seconds, it goes off and back on again Without the little vibration in the other cases, but gets stuck again
same thing happens when i hold down the 3 buttons all together.
i downloaded the stock rom from huawei's websit, put it into the dload folder and tried everything above 3 times. nothing happens.
i connect it to my computer for a chance to adb/fastboot, but in vain.
guys what can i do?
Click to expand...
Click to collapse
This is the Mate 2 Forums. Totally different device. You probably didnt unlock your bootloader. http://forum.xda-developers.com/showthread.php?t=2642403 Try there.
Moody66 said:
This is the Mate 2 Forums. Totally different device. You probably didnt unlock your bootloader. http://forum.xda-developers.com/showthread.php?t=2642403 Try there.
Click to expand...
Click to collapse
sorry, a moderator moved my thread here so i'm powerless. besides, the link you gave me works when the device is recognized by my computer, which isn't the case
jasonlarry.123 said:
sorry, a moderator moved my thread here so i'm powerless. besides, the link you gave me works when the device is recognized by my computer, which isn't the case
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=55361611&postcount=6
Also
http://forum.xda-developers.com/showthread.php?p=6124522#post6124522
Team,
i was trying to install some old hacker kernel maybe of MM version accidentaly on my S6 edge Noughat Noble rom, now i am stuck at Creating paths line, not going ahead since hours, neither i am unable to open recovery mode or the other mode, unable to switch off phone as well, kindly help ,,,, emergency.
thanks.
emergency ... unable to swetich off the phone as well ... help .. sos
Just Power + Volume '-' + Home hold it together. When Samsung logo comes then switch fast to 'Volume +' button and also hold it together then will you go to recovery menu.
no dear, its an emergency , i am unable to do anything, i cant even switch off the phone and hence need help for this emergency, show some kindness and plelase help me out from this mess.
rifek4 said:
Just Power + Volume '-' + Home hold it together. When Samsung logo comes then switch fast to 'Volume +' button and also hold it together then will you go to recovery menu.
Click to expand...
Click to collapse
thats the problem dear, tried that when i do it .. it says screenshot saved to device, it is not restarting the phone. What do i do now
npk21 said:
thats the problem dear, tried that when i do it .. it says screenshot saved to device, it is not restarting the phone. What do i do now
Click to expand...
Click to collapse
System is already working or TWRP? Doesn't matter what if you hold power button for 30 sec (something like that, don't remember good) phone must turn-off/turn-on/reboot.
rifek4 said:
System is already working or TWRP? Doesn't matter what if you hold power button for 30 sec (something like that, don't remember good) phone must turn-off/turn-on/reboot.
Click to expand...
Click to collapse
I am on twrp , stuck at kernel installation screen, tried power and volume up and home didnt help , and when i try power and vloume down and home it says screen shot taken, the phone is not restarting at all . cant even switch off the phone.
npk21 said:
I am on twrp , stuck at kernel installation screen, tried power and volume up and home didnt help , and when i try power and vloume down and home it says screen shot taken, the phone is not restarting at all . cant even switch off the phone.
Click to expand...
Click to collapse
Power, Volume DOWN and Home... For longer time (min. 20 sec) not like 5 second.
holy god , you saved it brother, its working now, had to hold the button for 20 secs. thanks i will re install the rom and the kernel in your signature.
thankyou once again, and sorry for creaating new thread, it was an emerggency situation for me,
npk21 said:
holy god , you saved it brother, its working now, had to hold the button for 20 secs. thanks i will re install the rom and the kernel in your signature.
thankyou once again, and sorry for creaating new thread, it was an emerggency situation for me,
Click to expand...
Click to collapse
Just do not panic the next time and look for the answer yourself which is simple
Hi there,
a friend of mine gave me her completely original and stock Galaxy S 3 Neo that got stuck in a bootloop while she was using it.
If you power up the phone, it shows the Samsung Galaxy logo, then proceeds to load the animated logo with the music, but as soon as the first second of music is played, the phone bootloops.
If I try to boot in recovery mode (Home+Power+Volume UP), it bootloops.
If I try to enter Odin mode (Home+Power+Volume DOWN), it bootloops.
Could anyone please explain to me the steps I have to do in order to recover this phone? It is absolutely ESSENTIAL not to delete the internal storage data, because she keeps there many photos of his son (with no backup... how clever)...
Thanks a lot!
Do you see the download or recovery screen before it bootloops?
audit13 said:
Do you see the download or recovery screen before it bootloops?
Click to expand...
Click to collapse
Yes. It reboots after just a few seconds I see recovery or dowload mode, bu it actually loads them before rebooting. The phone is even recognized by Odin just before it reboots.
Are you sure the battery is okay and fully charged? It's possible that the power button is stuck.
audit13 said:
Are you sure the battery is okay and fully charged? It's possible that the power button is stuck.
Click to expand...
Click to collapse
I don't know if the battery is ok... I tried to remove the battery plug the phone but it won't start without. I don't have another battery to try...
It may be the power button whereby the button is stuck in the "pressed" position.
audit13 said:
It may be the power button whereby the button is stuck in the "pressed" position.
Click to expand...
Click to collapse
The power button clicks ok so it doesn't look like it is stuck... I'll look more into it
Edit: WTF I can access download mode just by pressing Home and Volume down, so it seems the power button IS stuck even if it clicks normally...
Although it clicks, it may be stuck in the pressed position.
If you have a multimeter, you could test the power button contacts.
I found this video: https://m.youtube.com/watch?v=rOCa-hQQ2Ko
Damn, it really was stuck! I hit the side of the phone a bunch of time with a pen and the button got un-stuck! Thanks for the help!
davidrf said:
Damn, it really was stuck! I hit the side of the phone a bunch of time with a pen and the button got un-stuck! Thanks for the help!
Click to expand...
Click to collapse
So it works now?
The Nexus 5 is famous for its failing power button.
audit13 said:
So it works now?
The Nexus 5 is famous for its failing power button.
Click to expand...
Click to collapse
Yeah it works perfectly. It just had the need to be hit a couple of times :laugh:
Hello everyone,
I'm here because I tried so much guides to unbrick my Xiaomi Redmi Note 3 pro SE without any sort of good result...
Mine is stuck on EDL mode (Qualcomm HS-USB QDLoader 9008 thanks to a homemade deep cable).
I can't boot with the power button and I don't know why, it looks like the button doesn't work anymore .
Sometimes, I can boot on fastboot mode by plugging the cable and pressing VOL- and sometimes it doesn't work
Can someone help me to ger rid of this problem please?
Thanks in advance guys
Do not hesitate to ask me more informations, I'll try to give you an answer.
Edit : I just tried this guide en.miui(dot)com/thread-235865-1-1.html and the flash was succesful.
I have now fully access to fastboot mode.
But now my phone keep showing Mi logo and rebooting. Any idea ?
Edit2 : i've done this one now xiaomitips(dot)com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution
But now my phone is showing Mi logo and vibrating then rebooting...
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide and working great
Try it
Leftrand said:
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide
Try it
Click to expand...
Click to collapse
Thanks for the response, i'll try your guide
I did your guide, flashed TWRP but same result. I can't press POWER button and when i try to boot on recovery with VOL+ and plugging the usb cable, mi logo and rebooting...
Rtxx said:
I did your guide, flashed TWRP but same result. I can't press POWER button and when i try to boot on recovery with VOL+ and plugging the usb cable, mi logo and rebooting...
Click to expand...
Click to collapse
Why u r plugging the usb cable and pressing vol+ ?
To do wat?
Black_Stark said:
Why u r plugging the usb cable and pressing vol+ ?
To do wat?
Click to expand...
Click to collapse
Leftrand said:
Same issue like me
Flash success but blinking at black screen or crazy endless reboot.
I solve the issue flashing This Guide and working great
Try it
Click to expand...
Click to collapse
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Rtxx said:
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Click to expand...
Click to collapse
U can unplug cable. No harm.
Press and hold together vol up + power. And release both immediately with vibration. U will boot into twrp.
Rtxx said:
To continue the tutoriel that Leftrand gave me ofc.
"Now don't unplug your phone or anything just press volume up and power down button at same time and you will see your phone booting into TWRP. Now you can unplug and reeboot your phone."
Click to expand...
Click to collapse
Press power and volume up while still plugging after
flashing done about 10 second ?
I did everything you guys said but my phone is still blocked in bootloop
Look at my video -> youtu(dot)be/pi2-fnSNGGA
Rtxx said:
I did everything you guys said but my phone is still blocked in bootloop
Look at my video -> youtu(dot)be/pi2-fnSNGGA
Click to expand...
Click to collapse
Sad ?
Did you check hardware yet or emmc ?
Leftrand said:
Sad
Did you check hardware yet or emmc ?
Click to expand...
Click to collapse
I don't know what you mean by checking hardware, eveything was working well until I failed my flash and then my phone was bricked.