i bricked my redmi 5 and its cant reboot to fastboot , its only show usb diagnostics 900E , how to fix this
Related
Hi all
I have a redmi 4 prada on 7.5.25 China developer.
I cannot enter edl mode, not with the regular (adb reboot edl) when the device is on connected to pc nor with fastboot mode.
It just reboots to android again, not edl mode,
Any ideas?
oslo city said:
Hi all
I have a redmi 4 prada on 7.5.25 China developer.
I cannot enter edl mode, not with the regular (adb reboot edl) when the device is on connected to pc nor with fastboot mode.
It just reboots to android again, not edl mode,
Any ideas?
Click to expand...
Click to collapse
Plus
I have unlocked the bootloader, does that have anything to do with it?
Thanks
EDL reboot might be disabled in this ROM version. Try via tespoint (got to open the phone though).
Just google redmi 4 testpoint.
Turn off the phone completely
Turn it on by pressing ALL 3 buttons at once, and try to plug the USB in fastly
POWER + Volume UP + Volume DOWN
This is how you enter EDL mode
If it doesn't work you need an EDL cable, you can also mod a regular MicroUSB into an EDL cable
My device is " 10 or D (3gb) " :
Chipset :- Qualcomm Snapdragon 425
OS :- Stock android was 7.1.2 but, upgraded to 8.1 (Oreo).
Before 10 days i executed a command -- fastboot oem lock -- this command was executed successfully, But after this my device was not booting, when i long press lock button than there was a boot logo for just 0.5 sec and nothing.
After this my device was recognized as -- QH_BULK -- when i installed qualcomm drives, then it was shown as --Qualcomm_Qd_loader 900E -- . I tried some combinations of buttons then finally got --Qualcomm_QD-loader 9008 .
When i searched about "Qd loader 9008" then i found to flash my Stock firmware by QFIL tool. I flashed my Stock rom many times but, also after a successful flash my phone is not booting, also now there is no boot screen after pressing power button. Its now completely black, but charger LED is glowing.
I have still a hope. I searched about my problem, then i found that either my --emmc storage-- is corrupted or the command i executed --fastboot oem lock-- is preventing partitions from overwriting .
Now if my emmc storage is corrupted than i think i have to boot my device from SD Card. Is someone have " emmc.img " of " 10 or D " then please share with me.
Now the situation is, my phone have totally blank screen, LED indicater is glowing red, on connecting to PC Device manager shows it as "Qualcomm_QDLoader 9008",
Also i tried to give a command --fastboot oem unlock-- at this moment. But fastboot is not recognizing my device. On typing --Fastboot devices-- no device is listed.
How could i unlock oem to flash rom.
Hi i download another stock rom of my device which was maybe a fastboot rom because there was a fastboot.bat script in it.
I tried to flash it by miflash tool. Flash took 4 seconds and ended with error message.
After this now my device is recorgnized as
Qualcomm_hs-usb_diagnostic 900E
And now my device started vibrating a little after pressing lock key or volume key
I tried many key combinations but it is not getting qd loader 9008 mode.
I also tried to disconnect battrey connector and then connected to pc but still in 900E mode.
Help me to get 9008 edl mode
Hello dear friends, my redmi note 9s curtana is unlock bootloader and eng rom installed, device have not problem in USB socket etc... and detected in recovery, adb & edl mode, bu it is not detected in fastboot mode. what is the solution?
Ok so my Xiaomi Mi 8 Lite was (hard??)bricked because I flashed something I shouldn't have so now I can still access recovery mode TWRP but fastboot does not work at all. I've tried flashing lineage but when I boot it back up it just brings me back to TWRP after rebooting again.
By fastboot not working I mean that once I connect the device to a computer, the phone automatically quits fastboot mode. ADB can't even seem to find it in the devices list.
What should I do? Is my phone dead forever?
Thank you!!!
Hi, after trying to install TWRP recovery through adb the phone got stuck in fastboot mode. Then I tryed to flash stock rom through Mi flash tool. Then the mobile phone wouldn´t turn on. Now ot is in EDL mode. By PC it is recognised as Qualcom COM port. Flashing through Mi Flash or QFIL didn´t work. Could somebody please help me?