Before error , installed firmware was unofficial stock firmware (rooted but removed it)
tried install stock firmware ( https://www.sammobile.com/samsung/galaxy-m11/firmware/SM-M115F/INS/download/M115FXXU2AUA3/1537817/ ) but odin failed
locked boot-loader (was unlocked earlier) as thinking it might help
now i am stuck in download mode.
HELP ME
HOPING FOR REPLY
MESSingUPthenLEARNing said:
Before error , installed firmware was unofficial stock firmware (rooted but removed it)
tried install stock firmware ( https://www.sammobile.com/samsung/galaxy-m11/firmware/SM-M115F/INS/download/M115FXXU2AUA3/1537817/ ) but odin failed
locked boot-loader (was unlocked earlier) as thinking it might help
now i am stuck in download mode.
HELP ME
HOPING FOR REPLY
Click to expand...
Click to collapse
Test this Odin
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
Related
I have a German S6 Galaxy Edge G925F. I rooted it early on with Kingroot, which (I gather) blocked me from receiving OTA updates from my provider. So I was stuck at 5.0.2. I've flashed custom ROMs on all my previous android devices, so this morning I thought I'd try flashing XtreStoLite as a way of getting to 5.1.1, and a nicer 5.1.1 at that! I used the directions at http://forum.xda-developers.com/gal...-xtrestolite-pure-edition-1-0-beta-1-t3082467 . I made a stupid mistake though, and started the update before reading ALL the instructions ALL the way through.
Now I can get into Download mode, but otherwise I'm stuck at the initial "samsung galaxy s6 edge powered by android" boot screen, with red text at the top:
Code:
KERNEL IS NOT SEANDROID ENFORCING
SYSTEM REV. CHECK FAIL. DEVICE: 2, BINARY: 1
I'm on a Mac, and since JOdin can't seem to read PIT files anymore I'm using pure heimdall command line. So here's what I did:
1) Downloaded G925F-XXU2BOGG-BOOTLOADER.tar from the above thread, and flashed the contained 5.1.1 cm.bin and sboot.bin. (
Code:
heimdall flash --no-reboot --80 sboot.bin --90 cm.bin
)
2) Immediately found myself unable to boot. Worried I had already ****ed up, I did not flash the modem (since that's the part that REALLY can't go back AFAIK)
3) Flashed TWRP linked from http://zidroid.com/how-to-install-twrp-root-galaxy-s6-edge-on-android-5-1-1/ . (
Code:
heimdall flash --no-reboot --6 recovery.img
).
Still couldn't boot into recovery.
4) Flashed a 5.1.1 kernel to see if that would help me boot: S6_UniKernel_v8-0002-ODIN from http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395 .
Now I'm stuck. I can't get into recovery mode to flash the actual rom, and my 5.0.2 OS doesn't match my 5.1.1 bootloader or kernel. If I could flash a 5.1.1 OS from heimdall that would be my next step, but I can't find one to use, and I'm not sure which partition(s) it would go to anyway.
On the download mode screen I see
Code:
ODIN MODE
PRODUCT NAME: SM-G925F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0304)
AP SWREV: B: 2 K:2 S:2
Please help! How I can get to recovery mode from here?
I dusted off an old Windows machine and fired it up, just to use ODIN. Found a vanilla 5.1.1 ROM for ODIN, and installed it from there... and it worked perfectly!
I don't understand why so many ROMs exist for odin, but no one packages for Heimdall. Heimdall seems much more reliable, and it's cross platform! Plus, we actually know what it's doing... /rant
Anyway, for whatever unlucky soul finds this... Flashing 5.1.1 via ODIN involved overwriting boot.img, cache.img, recovery.img, system.img, and modem.bin . Of course that's just one step for ODIN, you get a single .tar.md5 file, press the "AP" button to load it in, and it flashes those files to the right partitions in sequence.
So unless you have all of those files, I guess you can't do an update with Heimdall. You actually NEED a windows device.
ohthehugemanatee said:
I dusted off an old Windows machine and fired it up, just to use ODIN. Found a vanilla 5.1.1 ROM for ODIN, and installed it from there... and it worked perfectly!
I don't understand why so many ROMs exist for odin, but no one packages for Heimdall. Heimdall seems much more reliable, and it's cross platform! Plus, we actually know what it's doing... /rant
Anyway, for whatever unlucky soul finds this... Flashing 5.1.1 via ODIN involved overwriting boot.img, cache.img, recovery.img, system.img, and modem.bin . Of course that's just one step for ODIN, you get a single .tar.md5 file, press the "AP" button to load it in, and it flashes those files to the right partitions in sequence.
So unless you have all of those files, I guess you can't do an update with Heimdall. You actually NEED a windows device.
Click to expand...
Click to collapse
hi there i did the same thing as the op and my situation is identical but i am using windows so could you please help me because i am stuck now.
Just flash a custom recovery, boot into recovery, wipe everything then flash the custom rom. Pretty simple stuff no rocket science involved
FOR SAMSUNG GALAXY ALPHA G850F
For anyone who doesn't want to download the whole stock firmware or is using a custom ROM and hasn't update baseband/modem in a while or want to go back to stock recovery here are the latest Modem & (Stock) Recovery files taken from G850FXXU2CPG1_G850FOXE2CPG1_G850FXXU1CPC1 firmware
Download Modem : https://goo.gl/5Yr1Dr
Download Recovery: https://goo.gl/y1O3WM
To flash modem:
1. Download Odin here https://goo.gl/wL8LFs
2. Open Odin and click on CP and find the modem.bin file (wait until it says Added then countinue to 3)
3. Put your phone in Download Mode
4. Connect it via a USB cable with your pc
5. Click Start
6. Wait until your phone is booted.
Done !
To flash recovery (the way I do it )(You must have root):
1. Get the Flashify APP here : https://goo.gl/aQqYGa
2. Open Flashify and select "Recovery Image" under Flash
3. Find your recovery.img file, click ok and flash it
4. Wait for it to finish
Done !
Thanks.
Please Help me!
Why isn't working on my phone? I follow all the instructions, Odin install all perfectly but keep doing boot loops
I've flashed modem but LineageOS still isn't detecting my sim card.
Amazing, thank you! Downloading >1GB from cheapy download sites like rapidgator capped at ~30KB/s with flaky wifi is impossible for me.
ty
DurimKlaiqi said:
FOR SAMSUNG GALAXY ALPHA G850F
here are the latest Modem & (Stock) Recovery files taken from G850FXXU2CPG1_G850FOXE2CPG1_G850FXXU1CPC1 firmware
Click to expand...
Click to collapse
I suppose the baseband (CP) version you have attached is G850FXXU1CPC1
I have version G850FXXU1COJ5 and can't update - Odin can't flash, no details for the error, just failed 1. The full name of the ROM I had flashed is
G850FXXS2CQA2_G850FOLB2COJ1_G850FXXU1COJ5_HOME.tar.md5
and previously I had used
G850FXXU2COK6_G850FOLB2COJ1_G850FXXU1COJ5_HOME.tar.md5
which seem to have same baseband.
Why can't I update the baseband?
Thank you
Hi,
I am trying to flash newer baseband from what I have: G850FXXU1COJ5
I tried but failed with flashing through odin of the following two:
G850FXXU2COK6.bin
G850FXXU1CPC1.bin
Perhaps I am making a mistake in flashing it, but I am not aware which is newer or what is the difference between these two U2 COK6 and U1 CPC1
U2 > U1, but COK6 < CPC1, so which one is newer?
Thanks
Hello! I have a Network problem with my Galaxy S6 SM-G920T, I need a Modem for my Galaxy. The Baseband Version is: G920TUVS6FRC1. Help me please!
Markpetit92 said:
Hello! I have a Network problem with my Galaxy S6 SM-G920T, I need a Modem for my Galaxy. The Baseband Version is: G920TUVS6FRC1. Help me please!
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920T/
Hey
Yesterday I flashed a boot logo on my SM-G928F in TWRP. After that my phone doesn't boot into system or recovery anymore - there's always a blackscreen. I only can boot into download mode.
I tried to flash a stock-rom via Odin but that didn't helped - the same blackscreen, because a stock rom does not replace the boot logo.
I think I have to flash the stock boot logo ( https://drive.google.com/file/d/1378RQ5w_vAAmnQ3HB0FymZXWIm12T0Mg/view ) , but thats a zip which I can't flash via Odin.
There a two ways in my mind which could work:
1. Getting a tar.md5 file with the stock boot logo.
2. Getting a tool which allows to flash zips in download mode of the phone.
I really hope that someone could help me with my big problem.
Best regards
DGB
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
nr10prashant said:
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
Click to expand...
Click to collapse
Thank you for your answer but that didn't worked. The problem is that flashing the stock firmware doesn't replace or repair the boot image. So I've got a never ending blackscreen when I want to boot in system or TWRP/Recovery and that means that I'm not able to configure ADB Sideload.
I can only boot into download mode, nothing else.
I think the jpg of the boot logo I've installed was corrupted so it can't be loaded
You are in download mode so you have to press all the keys including the home button and once the download mode closes then press the "volume up key and power key and also the home button and then your phone will automatically reboot into recovery.
I know, I tried that multiple times but it doesn't work. Blackscreen... only a never ending blackscreen. The download mode is the only thing taht works. I have to flahs the old boot logo via download mode... but i don't know how
Wait for the battery to be drained out completely and then do what i said earlier
nr10prashant said:
Wait for the battery to be drained out completely and then do what i said earlier
Click to expand...
Click to collapse
I did. but it didn't work, too
I really need someone who is able to integrate the stock boot logo into a custom rom which can be flashed via Odin... Or I need a tool which allows to install zips in download mode. I tried adb sideload again but it didn't recognizes my phone when its not in recovery.
I really think that my S6 edge + is nearly died :crying:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Inderpreets said:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Click to expand...
Click to collapse
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
яι¢αя∂σ said:
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
Click to expand...
Click to collapse
I only tried to flash stock firmware with AP in Odin... and I tried stock rom with re-partition.
Where do I get those 4 files? I need XEU for my SM-G928F. It would be very nice if you could give me a more detailed instruction for this because I never worked with PIT...
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
яι¢αя∂σ said:
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
Click to expand...
Click to collapse
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
DGB100 said:
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
Click to expand...
Click to collapse
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
SmartSwitch still works for my G925v.
яι¢αя∂σ said:
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
Click to expand...
Click to collapse
I got my phone back to normal so thank you very much!
I have the same problem on my j2 prime I can only goto download mode and in odin tried to install stock firmware but got write fail..can you please help me with this error
As stated on the title I tried to do SamFAIL on my N950, it was on latest Oreo and I didn't know it would not work (my mistake)
I did the system flash with the .pit file on comsy odin successfully (it finished with fail as expected) but after that I cant flash anything.
I downloaded many official FW packages, Nougat and Oreo everything fails on official Odin, gives model mismatch error on comsy odin.
The only file I can flash is this : HOME_CSC_OYN_N950UOYN4CRD7_CL13303302_QB17839096_REV00
Its from the Oreo official package. If I try the regular CSC it fails as everything else. HOME CSC from nougat versions fail as well.
What I have tried so far:
Other Computer, Windows 7/10, other cable, all versions of odin (only 3.12.3 flashes home csc successfully), Smart Switch says unsupported device, no recovery mode stuck on Emergency Mode, sometimes it boots to normal download Mode
Is there a trick to force the flash? Did I break my device by doing the .pit flash? I thought that official FW would always flash no matter what... Hope someone has some ideas. Thanks in advance!
Hi am sick right now caused i messed up i trying to google frp my sm-a315g/dsl device and it kept freezing so i decided to try flashing individual files (yeah I should get some good licks for that ) so i started with the bootloader file it was successful but now the phone won't turn on at all not even charging. I tried brom tp but i don't have the right scatter files. Can anyone help me SOLVE my problem that I caused.
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Teddy Lo said:
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Click to expand...
Click to collapse
The phone not reading to work with Odin thats why am trying via Brom TP unless there is another way to get it show on Odin, cause the phone is not powering on to enter download mode.
Check SP Flash Tool with MTK drivers for MediaTek Helio P65 (MT6768).
Factory images fastboot stock firmware to be downloaded (not odin)