My S23 Ultra has a gap between display & device frame, showing this video because the Service center deny of such anamoly. Please let me know if this is normal with all S23 Ultra?
https://twitter.com/i/web/status/1664718193653432321
https://twitter.com/i/web/status/1670027363743334401
https://www.reddit.com/r/GalaxyS23/comments/14bu3cf
ahmedgva said:
My S23 Ultra has a gap between display & device frame, showing this video because the Service center deny of such anamoly. Please let me know if this is normal with all S23 Ultra?
https://twitter.com/i/web/status/1664718193653432321
https://twitter.com/i/web/status/1670027363743334401
https://www.reddit.com/r/GalaxyS23/comments/14bu3cf
Click to expand...
Click to collapse
Nope, not normal at all. It's probably gonna leak too.
Related
Hello,
I recently purchased Xperia tablet Z, and I have been observing difference in brightness of screen as top of the screen(near SONY logo) is brighter than bottom portion which is a little bit hazy and dull as compared to top of screen.(I am still on 4.1.2, dont want to upgrade as placement of soft buttons has been shifted in middle than left corner)
Upon contacting Xperia care and they asked download Xperia™ Diagnostics and run Display test.
When the Screen is white for 10 seconds this difference becomes more visible and prominent.
Can anybody confirm is it observable in all units or its just my unit that is faulty :crying: .
nabs.illusion said:
Hello,
I recently purchased Xperia tablet Z, and I have been observing difference in brightness of screen as top of the screen(near SONY logo) is brighter than bottom portion which is a little bit hazy and dull as compared to top of screen.(I am still on 4.1.2, dont want to upgrade as placement of soft buttons has been shifted in middle than left corner)
Upon contacting Xperia care and they asked download Xperia™ Diagnostics and run Display test.
When the Screen is white for 10 seconds this difference becomes more visible and prominent.
Can anybody confirm is it observable in all units or its just my unit that is faulty :crying: .
Click to expand...
Click to collapse
I think I saw your question over on the Sony support forum -- here's my answer:
I may have a related issue; the "top" quarter-inch or so my screen is barely dimmer than the rest of the display. Like your device, this is only noticeable on white or evenly colored screens when holding the table in portrait orientation. My first Xperia Tablet Z had this issue, I exchanged it, and the second one had the same exact issue. I'm otherwise happy with the device and since this is only really noticable under specific conditions I've decided to accept it ...
Same on mine... I had it sent to service but they said that its not faulty...
Sent from my GT-N7100 using Tapatalk
No other that can see this issue?
Sent from my GT-N7100 using Tapatalk
@jerdog posted this video earlier. Anyone else notice this with either their Xperia ZU or their ZU GPE?
I checked mine and it seems to not be as bad as jerdog's . On mine it seems to only happen when I press one particular spot on the screen
WHY did you have to show me this? I just checked by opening a black image in Chrome, and it does happen in one spot if i push hard. Looks like a part of the LED "feels the pressure".
Edit: Oh, also, the Z Ultra uses a "zero gap" display, which means that the LCD panel and the glass is one part, so by pushing the glass down, we also push the LCD panel down.
LordManhattan said:
WHY did you have to show me this? I just checked by opening a black image in Chrome, and it does happen in one spot if i push hard. Looks like a part of the LED "feels the pressure".
Edit: Oh, also, the Z Ultra uses a "zero gap" display, which means that the LCD panel and the glass is one part, so by pushing the glass down, we also push the LCD panel down.
Click to expand...
Click to collapse
Really Xperia Z Ultra uses "zero gap" display? Lg g2 has but never heard before for xzu.
techpal said:
Really Xperia Z Ultra uses "zero gap" display? Lg g2 has but never heard before for xzu.
Click to expand...
Click to collapse
Yes, Sir. I read it somewhere on the Sony blog or whatever. You can easily see this yourself by holding your finger straight down on the screen while it's on. It'll look like you're touching the piuxels and not the glass (which looks to be really really thin)
LordManhattan said:
Yes, Sir. I read it somewhere on the Sony blog or whatever. You can easily see this yourself by holding your finger straight down on the screen while it's on. It'll look like you're touching the piuxels and not the glass (which looks to be really really thin)
Click to expand...
Click to collapse
Thats nice to hearSame thing I experienced just now.
techpal said:
Thats nice to hearSame thing I experienced just now.
Click to expand...
Click to collapse
Yeah similar with mine. But it is more pronounced in the left and right of the screen about 2/3 from the bottom of the phone. Not a problem i guess.. But that just shows you how sensitive the display is and might need some extra care for not putting too much force on it.
hansip87 said:
Yeah similar with mine. But it is more pronounced in the left and right of the screen about 2/3 from the bottom of the phone. Not a problem i guess.. But that just shows you how sensitive the display is and might need some extra care for not putting too much force on it.
Click to expand...
Click to collapse
Yup, it doesn't surprise me, being an LCD display, but it's only noticeable if i press much harder than i'd usually press, so it won't even be noticeable under normal (human) usage.
Hi I bought the galaxy s6 edge black on 22nd soon after getting it i realised that the screen has a defect in terms some round circles below the glass. I noticed it when the screen is off in direct sunlight. the circle or spotting creates some discolour around under the sunlight where as it should stay flat black. I got it checked at the service centre of Samsung and they cross checked with their S6 Edge device which dint have any. Post which they issues a DOA where in i can go back to dealer and exchange it. I went back to dealer and got another unit in exchange plus its touch stopped functioning. Dealer removed another unit this time in Gold color which had a similar issue and was again verified by the service centre. So far all 3 device back to back has add similar problem. I got the 4th unit which again has similar problem and i have registered a complain with Samsung Customer care. If get no response will be going in for 4th DOA.
Any solution on this has anyone else noticed this issue in direct sunlight when screen stays off ?
Another issue I found is excessive noise issue in Camera under low light condition before taking the picture more like preview. My 4th device has Sony sensor. I don't think I had this issue in my 1st device which I used for 5 days. Can anyone confirm on this noise issue. attaching the screenshot.
Can S6 edge users confirm in regards to the camera noise issue ?
abhi021 said:
Can S6 edge users confirm in regards to the camera noise issue ?
Click to expand...
Click to collapse
Hi,
I don't have issues with camera. It's working good as of now.
Regards,
Richa
The noise "issue" on preview is normal. Reviewers have mentioned that. As long as you get good pictures after taking the shot, then I don't see any problem. This maybe is Samsung's way of "optimizing" their camera app.
My screenshot
My screenshot tooo noise
Hello
I've had my XZ1 since release, and after a few months I got light bleed on my screen. I went to the store and delivered it for repair. A few weeks later I got it back with a new screen. Now, about two months later, I got light bleed again on the exact same spots.
Is this a common issue with the XZ1, or Sony devices in general?
Do you have it at the top of the screen? Like on the photo? It is visible just from this angle or always?
I have a chance to buy basically new XZ1 for around 270 dollars but this is the photo of it. Do you think I should buy it or not?
Evzzza said:
Do you have it at the top of the screen? Like on the photo? It is visible just from this angle or always?
I have a chance to buy basically new XZ1 for around 270 dollars but this is the photo of it. Do you think I should buy it or not?
Click to expand...
Click to collapse
mine has it, too. most xz1 has it, so it is not problem
hve this too
i also have this bleeding at the top of the screen in my first xz1 unit, which i bought 2018.10.30 ( made in China ). it is most visible from angles. if i look at the screen directly i almost don't see this bleeding. I have another XZ1 unit, which is made in Thailand and this xz1 does not bleeding screen at all ( perfect at all angles ). So i don't know , what to do. is it good idea to bring it to service tech to replace screen???
I see pictures of the Sony GP-VPT2BT Shooting Grip with an Xperia Pro-I, but the product's official page doesn't mention the compatibility with any phone.
Anybody confirms it works?
Thanks!
Hello!
Yes it is, it came with as a bundle for the Xperia Pro i I bought with additional phone holder for it and also a display. The VPT2BT with the phone holder I use almost daily, but the extra display I haven't used barely at all as it's ment for vlogging and I don't do it.
https://www.sony.co.uk/electronics/accessories/xqz-iv01
-Meddo- said:
Hello!
Yes it is, it came with as a bundle for the Xperia Pro i I bought with additional phone holder for it and also a display. The VPT2BT with the phone holder I use almost daily, but the extra display I haven't used barely at all as it's ment for vlogging and I don't do it.
https://www.sony.co.uk/electronics/accessories/xqz-iv01
Click to expand...
Click to collapse
Thanks!
My phone's arriving after 2 months of problems (it's my third order now)