G'day,
Does anyone have an upgrade for PPC 2002 to 2003 for an O2 XDA I, cause I found ome but i have to pay for them.
Cheers,
Cal
http://lumpistefan.dyndns.org/
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
Related
Hello there guys...
a friend on mine brought me his sx56 to unlock, so when i searched over the internet i found that i need to update the rom with this special ROM, so i tried to update ROM with XDA-developers-SER-v12 using USB cable (cradle) it should take 5 minutes, but the computer restarted itself and the procesure was not compleated, and after that when you push the reset button (hole) it takes you to the bootloader screen and sayes GSM OK and give you the test functions, after that i tried to backup (i should backuped befor updating) the boot, it saied that sd card was writen ok, i hard reseted the device again but nothing happend, now it does noty inter the boot loader again, the device is stuck in the upgrade screen, when you push hard reset or soft reset nothing happens, ofcourse device can not be detected using USB connection.
i think the bootloader was damaged as well as the ROM, is there a way to rewrite the loader and the rom using SD card? because i dont have a serial cable.
thanks in advance
Mansi
Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
I have a PW10B1...I downgraded the ROM to 6.24
now info for device
ROM Version 4.01.16 Eng
Radio Version 6.24.00
Protocol Version 324e4
When I try to upload the Special edition Rom I get an error when running Xda tools
C:\xda>pnewbootloader bootloader_v5_15.nb0
Unable to find flash info offset, cannot disable bootloader writeprotect
I am following these instructions... the error occurs at step 5. please advise. I had downgraded the ROM from before and tried the unlock program. it did not work.
Now my goal was just to use the XDAunlock program. When I ran the program right from the defaults I got 'error getting unlock code.'
Here's what I started out with:
ROM: 4.01.16 ENG
Radio: 6.25.02
Wallaby booatloader: 5.22
What finally worked:
Radio: 6.24.00
ROM: 3.17.03 ENG (XDA special edition)
then upgraded back to 4.01.16 ENG
Wallaby boot loader 5.15
--------------------------------------------------------------------------------
What I grabbed:!
XDATools
ActiveSync
XDA-Developers Special Edition ROM 1.2
RSU 6.24.00 files
XDAUnlock.exe
1x64Mb+ SD card
What to do?!
Back up everything. Not just using the sda backup tool, from the boot loader.
You can do the SD backup if you want, consider it backing up your data.
You can also do the ActiveSync backup if you want to save your data.
I'm doing ALL of this with no SIM chip in the device. This may or may not be necessary.
Backup the existing bootloader and operating system using card reader
Wipe the SD card (format FAT). Stick the SD card back into the pda and soft reset, then cradle it.
Go to a DOS prompt and CD to where you have extracted the XDATools
Type 'pnewbootloader bootloader_v5_15.nb0' to write the Wallaby 5.15 boot loader to the device.
The output looks like this:
D:\XDAtools\binaries>pnewbootloader_40116 bl515.nb0
Copying D:\XDAtools\binaries\itsutils.dll to WCE:\windows\itsutils.dll
in FindFlashInfoOffset
protection found at 8c0d60f8
result: 00000000 00000000
Install the XDA-Developers Special Edition ROM 1.2
You can try installing it directly via ActiveSync connection by running the exe on your PC
or
Flash your device via SD Card and bootloader (by writing the NK.nbf-file in the directory English to your Device)
Boot up your device
Follow the instructions to calibrate the screen and you're ready to move on.
Grab the RSU 6.24.00 files and unzip into a folder on your computer
Use ActiveSync to copy the files to \windows on the device.
Execute the rsupdate.exe program to reprogram the radio to 6.24.
When completed soft reset the device
Go into start -> settings -> system -> device info to make sure you're at 6.24 radio vesion
Copy the xdaunlock.exe to the device and execute.
It should say 'you're device appears to be SIM Locked, would you like to remedy this?"
Click Yes to unlock the device.
Now the device is unlocked.
You can change the ROM to WM2003 or any other ROM if you want.
Also you can re-upgrade your bootloader and radio stack if you want but I'm leaving well enough alone for now!
formatting the SD card
I used my PC and a card reader to format the SD card as FAT. I did not see any other option from the device itself to format the card.... could this be part of the problem ?
can anyone tell me how to use the PW10B1 to fromat
can anyone tell me how to use the PW10B1 to fromat the SD card. I havew copied the image via the OS image tool, but the does not the device does not ask me to format.when I put the SD card in. it can read the NK.nbf file as 31MB. When I power/reset it just goes to GSM OK.
Please help. I have reinserted the card but no difference.
Download XDATools
Extract them at any place and run osimagetool
Select your Rom Image from the Source drop down menu.
Select your SD card (disk drive) from Destination the drop down menu.
Select Copy to start writing process and the tool should start writing to the card.
When XDATools has finished writing the image (no Infomessage) put the SD-card into your device
If there comes a message to format the SD-card select No
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
any ideas
anyone know what I should do ?
you need the attached bootloader installed first.
Then you can do the SD.
Format FAT using reader card is fine.
To load the image file, I use:
1) Right click on the NK.nbf file & select write to SD.
this assume you have registered the tool to your system by
running the "-register" command.
If the attached bootloader doesn't work, then you need to upgrade your
*.NET framework.
This is what works for me.
Chip
I have a rom kitchen that can cook roms for startek. I am going to try to make a rom today with all the info I have found so far. My 3125 is scrap to me so if I brick it I don't care. Wish me luck I'll keep you all posted.
Just a little update, super CID unlocked the phone and have been able to manipulate some files. Attempted flashing an os.bin from typhoon but phone would no longer boot. Retrying, thought bricked device but no. I'll update as I make progress.
sledwrecker said:
Just a little update, super CID unlocked the phone and have been able to manipulate some files. Attempted flashing an os.bin from typhoon but phone would no longer boot. Retrying, thought bricked device but no. I'll update as I make progress.
Click to expand...
Click to collapse
Sledwrecker, thanks for taking the initiative on this. I also have a dormant QTEK 8500 when you get a little further along and need another tester. Let me know, I'm up for it.
Well seems as though I have bricked this turd.... I am locked in bootloader I can't recover from SD fallowing all the steps I have found around here.
Trying to D/L the qtek rom now maybe that will work.
I can't get the phone to connect to pc in bootloader mode. Phone enters bootloader, I plug in USB and it shows "USB" on the bottom left but I can't see the phone through MTTY or throught the RUU setup.
I'll update if I figure this out.
Prepare your SD card with the OEM ROM per this method and this should (hopefully) unbrick your device. Please report back so I can also know if it works in this situation. Thanks!
From the WIKI: StarTrek SD Card flashing
It is necessary to format your microsd card to FAT32 filesystem!
# Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it in fat32 from your computer using a card reader (in some cases format doesn't work).
# Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / ~MacOS use [cabextract | http://www.kyz.uklinux.net/cabextract.php].
# Rename the .NBH file to *STARIMG.nbh* and copy it to the root folder of your microSD card.
# With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and Camera button at the same time).
# You should see the screen with SD Card searching, then confirm flashing on screen by pressing Softkey.
# Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 25 minutes, so check your battery or connect to charger before the flashing process starts.
~SuperCID devices are able to flash any official NBH image using this method.
I've tried this several times with the english nk.nbh from HTC's american rom and the CWS rom as well.
1. Extract RUU_STAR100_4.1.502.5_02.79.30_CWS_SHIP.exe
2. rename .nbh file to STARIMG.nbh
3. format "my" 1 gig micro SD card FAT32
4. copy STARIMG.nbh to MicroSD card
5. Insert MicroSD card into STarTrek
6. Power on in bootloader mode holding camera and voice record then pressing power.
7. White screen with blue text "searching for SD card"
8. Tri-Color Boot loader....
Never finds / Sees the SD card
PC sees MicroSD card just fine.
Also, as mentioned above I can't get the phone to connect via USB and bootloader either.
Here is what I KNOW I did "wrong" possibly....
1. I was in MTTY trying to upload a WM6 os.bin to the startack.
2. Ran set 32
3. It found device "ok"
4. lnbs os.bin
5. it did a format and copy
6. restarted phone
7. Nothing.......
8. Hard reset ........
9. Nothing
10. camera, voice record, power = bootloader... Works..
This is where I am at. Like I said I jsut want to get a WM6 rom working if the phone is done the oh well. I am here to help.
Try this
If you want to connect in bootloader and you see the usb connection try the following:
In Activesync, unckeck the Alloy USB connections box.
Remove the device entry from control pannel under mobile devices
plug in the device to USB
Run the enableRAPI program to try to re-establish communications
Here is also a rapidshare link to the latest OFFICIAL WWE ROM for WM5 QTEK 8500. Try it as RUU after the above, if that does not work, extract the contents and try the SD flash again. My gut says if you can get to bootloader, you haven't bricked it yet.
http://rapidshare.com/files/56652190/RUU_STAR100_3.6.251.0_02.67.30_QtekEUR_Ship.exe.html
You said
*Remove the device entry from control pannel under mobile devices
Can you be specific, I can't figure that part out? asside from removing the device entry I've done everything else.
When I try to run the enablerapi it just sits at a blank cmd prompt?
Still no luck get the 260 error when running the RUU
Start>Control Pannel>System>Device manager>Portable Devices>(Windows mobile-based device)
Remove whatever device looks like StarTrk or WM Smartphone
Well I went through device manager and can't find any reference to mobile device or startrek. still can't get the phone to connect.
SD card flashing still did not work even using the .nbh from the rapidshare link above.
When the phone first goes into bootloader it says searching for SD for about 1 second then goes to tri color screen. it's as if it doesn't see the SD card at all.
When in bootloader if I plug in the usb cable I get the little USB down in the bottom but I can't get the enable rapi to work. It just hangs or sits at a cmd propmpt
Sounds like we need to get the SD flashing to recognize your card,
Let me walk through the process with my working QTEK and the same ROM I posted to Rapidshare, then we can compare notes again.
EDIT: By the way, My IPL/SPL show 3.06.0000 and the USB connection does link when attached to my PC (Vista).
SD Flashes OK
Well, I found only a few contentious points with the SD flashing guide:
1) VERY CLEARLY states you must format for FAT32
I had to buy a new microSD for this test. It came standard in FAT16 not FAT32. Took quite some time to format it.
2) Extracted the .nbh file using WinRAR version 3.7
3) Rename the file STARIMG.nbh in CAPS as shown. This was the only file on the card and was in the root directory
4) when installing the microSD, it was necessary to put my SIM card in to keep the SD located properly.
The rest went as expected without fault.
Dude you are my personal hero.
I got it unbricked or fixed using your method.
Here is what I did EXACTLY so maybe this will help someone else.
1. Take 1 gig Kingston MicroSD card
2. Put it in SD sleave and Plug into Computers SD card reader
3. Open Disk Management by right click on my computer then "manage"
4. Selected Removable Disk
5. Format as FAT32, Cluster size = 512 and NO QUICK FORMAT and NO Volume Name
6. Extract ship.......*.nbh from official rom RUU installer.
7. Rename Ship......*.nbh to STARIMG.nbh
8. Copy to SD card
9. Place MicroSD card in phone
10. Insert SIM
11. Insert Battery Pack
12. Holding camera and voice buttons press and release power on
13. Phone searched for SD card
14. Success Phone found SD card press middle side button to start download from SD.
15. Took less than 10 minutes to complete recovery!!!!!!!!!!!!!!!!
I saw some other threads around with people stuck like I was earlier. Try this it worked for me!
Back to the cooking I'm either going to brick this phone or get WM6 working!!!
THANKS AGAIN!
I love it when a plan comes together! Good luck in the kitchen.
Haven't given up yet.. quickk update.
I've been able to succesfuly extract the WM5 ROM completely.
I've been unable yet to extract a complete nk.nbf from Tornado.
After close comparison looks like tornado is closest to Startrek. It has the same OMAP 850 Proc and architecture was going to port typhoon since it's the 730 and the 850 is basicly the same but faster.
I have got an os.bin tornado WM6, not sure what to do at this point.
----
From what I found if I use the XIP from the WM5 rom then the main drivers, keypad, etc.. should work. in theory..
Can I mesh the os.bin into an .nb file ?
I was consifering pdocwrite.exe to upload it but I need to know how to caluclate the header size. Unsure here.
Can I take the os.bin, convert it to .nb and then mesh it in with a WM5 nk.nbh?
Looking for some suggestions, if there is anything OBVIOUS that I am missing please poitn it out.
Try to contact with Erofich, sp3dev or pof, cause these gays working on this project and use the pdocwrite. So they can tell you how to caluclate the header size.
Also in this thread have some info too:
http://forum.xda-developers.com/showthread.php?t=311776
Windows nb from Typhoon
http://rapidshare.com/files/57065531/windows.nb
Here's a windows.nb we can try if you wish from the Typhoon WM6 ROM in my signature. I know you said the Tornado has similar hardware, but I think the Typhoon is also a close match. This comes from the Typhoon os.bin but I am not 100% certain of the process to make it.
(I do have WM6 working excellently on my Typhoon from this file)
I believe if you replace the WM5 windows.nb with this one from WM6 then recook it, it just may work.
k, giving this a shot
I have nb to nbf for wizard. What do you think will be the best tool to recompile the .nbh?
I'll keep reading on my own for now
Using MTTY to try and flash as 06_os.nb
Getting the fallowing error.
Cmd>lnbs 06_os.nb 0x0 0x2600000
clean up the image temp buffer at 0x8C080000 Length 0x03A00000
MTTYDownloadImage
"06_os.nb"
:F=06_os.nb
start download
S
HAddress A0000000h Length 01B00027h
Start Address out of boundary
checking image header<CE-31><CE-2034088><CE-2034088>
OK, I have been reading wiki, looking at threads...but I onestly dont understand...
I am trying to install from my sd card, but it never catches the file...
I renamed it to HERMING, booted up...and nothing
Do I need a drifrent booloader vercion?
How do I know what I have?
I saw in wiki that it is on settings-device information ....but it wasent there.
Please help!
I want to upgrade to the new WM 6.1
I also tried it with ActiveSync via RUUwrapper.exe
I told it to autodetect my bootloader, but it says It couldnt, and to update in safeboot mode. I did but, the phone asks me to allow a file, it restart and goes to boot screen...then my pc says it has a comunication error.
WIll you please help?
Thanks
fernandosaez said:
OK, I have been reading wiki, looking at threads...but I onestly dont understand...
I am trying to install from my sd card, but it never catches the file...
I renamed it to HERMING, booted up...and nothing
Click to expand...
Click to collapse
You sure you named it correctly?
Per the wiki at http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing:
- Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work) make shure it's formated in fat32 format. As a precaution you might want to check the MicroSD card for file errors. i.e (Properties->Tools->Error Checking)
- Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
- Rename the .NBH file to HERMIMG.nbh and copy it to the root folder of your microSD card.
- With microSD card inserted on the phone, start the bootloader (hold Ok button on left side and POWER button at same time and stick with stylus in RESET on bottom).
Hi xda! I apologize if this has been asked and answered, I promise I tried searching. I also apologize if this is in the wrong forum, I'm quite daft actually. My question to you guys is if you really need a SD adapter when trying to create a gold card for my Legend, or would you be able to accomplish the same things if you have the microsd card in your phone and mount it as storage? Seeing as I would really like to root my phone, but have somehow lost my adapter, it would be great if you could use the phone instead.
Thanks in advance
How to create a GoldCard
This guide explains how to create a GoldCard. A GoldCard is a special SD card which, when inserted into your device, allows you to flash RUU files with a different CID to your own device. For example, if you own a T-Mobile branded device, this will allow you to flash a generic ROM.
Requirements
•Spare microSD card (No bigger than 4GB)
•Windows PC (recommended)
•ADB (part of the tools folder of the SDK, available for download here
•HxD Hex Editor, available for download here
Step by step instructions
•Format the microSD card to FAT32 format.
•Put the microSD card in your device and boot it.
•Ensure you have unzipped the SDK, then open a command prompt to the extract location. Change to the 'tools directory.
•Enter 'adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid' and press enter. You should get a very long number which looks like this: 532600bd227d9c0347329407514d5402.
•Visit this page, paste in your number and reverse it. In our example the result would be 00544d5107943247039c7d22bd002653.
•Visit this page, enter your reversed number and create your goldcard image, which will be e-mailed to you.
•Open the HxD hex editor. If you are using Windows Vista or Windows 7, you must run the application as administrator.
•Go to the 'Extra' menu and select 'Open Disk'. Under physical disk, select Removable Disk (your microSD card), uncheck 'Open as Readonly' and click OK. Note that you should select physical disk NOT the logical disk. This is important!
•Go to the 'Extra' menu again and select 'Open Disk Image'. Open the goldcard image that you received by email.
•You should now have two tabs - one is your removable disk, the other is your goldcard image. Press OK when prompted for 'Sector Size' (selecting 512 (Hard disks/Floppy disks)) and click OK.
•Click on the goldcard image tab. Go to the 'Edit' menu, choose 'Select All' then select the 'Edit' menu again and select 'Copy'.
•Click on the 'Removable Disk' tab. Highlight offset (line) 00000000 to offset (line) 00000170 (including the 00000170 line), then click on the 'Edit' menu and select 'Paste Write'.
•Click on the 'File' menu and select 'Save', accepting the warning.
You now have a goldcard!
Source: Android @ MoDaCo Forum
So basically there's no difference between using a SD adapter and not (i'm refering to theunlockr guide which is basically the same as far as i can tell, but they really emphasize the sd adapter)? Also, what happens if you use a microsd card that is bigger than 4 gb, say 8 gb in my case?
here is a guide I posted a while back. Relatively easy way for creating a Goldcard.
http://forum.xda-developers.com/showthread.php?t=823625
ishan_rulz said:
here is a guide I posted a while back. Relatively easy way for creating a Goldcard.
http://forum.xda-developers.com/showthread.php?t=823625
Click to expand...
Click to collapse
It seems brilliant, but I get an error: Object reference not set to an instance or an object... or somesuch message.. Why ?
EDIT: Okay, I figured it out. You have to change the phone from just charging to mount as disk drive so you can choose it from the dropdown menu "HTC MMC".
You guys just made my freaking day. Thanks!!