!!!BE SURE THAT YOU DO SOMETHING AT YOUR OWN RISK!!!
!!!FOLLOW MY INSTRUCTION FOR STEP BY STEP!!!
I want to say that Im not a real programmer, I found some way to flash CID LOCKED device and wrote only shell (with userfrendly interface) and collected some useful tools.
Special thanx to itsme for his tools (if i dont mistake...)
WARNING!!! IF YOU WILL SEE CMD WINDOW DON’T CLOSE IT!!!
WARNING!!! DON’T TOUCH YOUR PC OR DEVICE WHILE FLASHING!!!
With this tool and my instruction you could:
1) Get info about ROM
2) Extract only OS from whole nk.nbf
3) Flash this OS to your G3/G4 CID LOCKED Device (even wm6 rom or latest aku 3.3 rom).
In atachment there are:
1) ShellTool.doc - instruction. Read first and please, follow it step by step!!!
2) ShellTool.exe with some other files that it need
3) Cert_SPCS.cab/EnableRapi.cab - should be installed on your device
I tryed to flash diffrent rom to g4 CID LOCKED DEVICE and its were flashed on it and worked perfect. Have fun
_________________________________________________________________________________
If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom. ftp://xda:[email protected]/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!
_________________________________________________________________________________
ChangeLog:
1) Several bugs were fixed. Now you can flash OS from every rom you want
http://rapidshare.com/files/53678765/ShellTool_bugfixed.rar.html
Uploaded it to XDA developers:
ftp://xda:[email protected]/Uploads/WIZARD/Unlocking/img-27361-ShellTool.rar
Great job! gonna test it soon.. Does it also install extended ROM's on G4 devices?
Yeahhh it's workinggg, great job, now i've wm6 in my g4 locked device, hehehe you're the best... thanks
@neonkoala
Thanx
speedfight said:
Does it also install extended ROM's on G4 devices?
Click to expand...
Click to collapse
No, now it can install only OS. I think i include this (extrom writing) feature in next release
2all
found some problem with old rom (try to unpack molski 2.26 rom). My tools can't extract it correctly. So be careful. Ill fixed this bug tommorow...now need to sleep..)
Great job! Think you've made many people very happy!
working fine over here now runing wm6 pdaviet4 and loving it
Still can't believe that!
Couldn't flash G4 CID-locked with "Faria 3.3 v2". The utility just doesn't flash it.
Flashing now with Orwell's WM6... let's see what we get
Yep! Worked that perfectly to me! No need to CID-unlock the Wizard
Great job mun_rus!
Well done! Works great! Just installed Orwell's 1984 flawlessly. Just have to search around to figure out the MMS and Camera bugs. Thanks!!!
i tried installing wm6 pdaviet4...but now it is stopped at the screen with ipl spl
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 10.1.0.011
no itsutils errors...nothing wrong while flashing...
EDIT: Now works. Entered in bootloader...flashed back old rom...e tried again.
Probably my error was a notification that poped up while flashing
I cant seem to flash any sort of rom. Ive tryed to flash aku 3.3 farias v2, doesnt work, molskis aku 3.2 doesnt work. I dont want to flash wm6 because i havent got a version that i want to flash it with. What am i doing wrong? I followed the instructions and when i go to flash the device, it goes pretty much instanly to
-------------------------------------Log Window-----------------------------------
Extracting OS...
Please wait...
Done!
********************
!!! Please make sure that: !!!
!!! You enabled the RAPI (setuped EnableRAPI.cab and rebooted)
!!! You connected your Wizard to the PC with USB ActiveSync connection
***Please, dont touch your device or PC while flashing***
***Because you may abort this operation!!! Dont do that!!!***
***You will get the message when your device will be flashed!!!***
********************
***Press OK to start***
********************
----!!!This process takes more tnan 15 minutes!!!----
[12:11:48.62] Write ROM 80040000-extension ro.nb Start
Do not disconnect the Wizard during the process
********************
[12:11:50.89] Write ROM 80040000-extension ro.nb End
********************
I would really like aku 3.3/3.2
Is there some where maybe i can get an untouched 3.3 rom that might help?
it does work... you saved me 30€
tnx mate
chriskaragiannis said:
I cant seem to flash any sort of rom. Ive tryed to flash aku 3.3 farias v2, doesnt work, molskis aku 3.2 doesnt work. I dont want to flash wm6 because i havent got a version that i want to flash it with. What am i doing wrong? I followed the instructions and when i go to flash the device, it goes pretty much instanly to
-------------------------------------Log Window-----------------------------------
....
I would really like aku 3.3/3.2
Is there some where maybe i can get an untouched 3.3 rom that might help?
Click to expand...
Click to collapse
try to use new version of my tool
mun_rus said:
try to use new version of my tool
Click to expand...
Click to collapse
I can't download
Upload it once more to xda
thabks
Thanks a lot Mun_rus for the tool! it work great
just upfrade to molski 's aku 3.rom
souvath
ps where can i download your aku 3.5
thank u
this program work perfectly and i think thats amazingly achievement and it made my day so happy!!!
Thanks!!!
Many thanks to mun_rus, the tool works perfect, upgraded ROM to Faria's AKU3.3.
This thread should be No1 in G4 !!!!!!!!!!!!!!!!!!!!
link is dead
hi guys ftp link is not working anymore.where can I download shelltools?thanks for help
It works well.
What I understand is this thing flash the system rom part while runing the OS instead of putting the device in a flash mode.
Btw, I was used to work with a virutal machine (emulated XP becaause of Vista) and I wasn't able to flash correctly.
Each time, it wouldn't go to the end of the process.
Related
here is AP3 version (based on latest Dual) I made that will work properly if you upgraded to new SPL but want to go back to AP3 from the AP4 beta.
(only the kernel needed changes. the rest is the same.)
download:
http://htc-hackers.com/uploads/ap3newspl.zip
IMPORTANT NOTE: this will only work if you ran the AP4 package (prerelease, final (when it comes out) etc.) and your SPL now is version 3.xx.OliNex
if you are unsure about your SPL/bootloader version then check in bootloader/tricolour screen by pressing and holding the camera button (as far as it will go!!) while doing a soft reset - keep the camera pressed until the tricolour screen appears.
Not sure why people would want to go back to AP3 - but I'm sure someone will and this will help them.
Did you have a good time in London?
how safe is it? im thinking about going back to ap dual. I only really like the homescreen. I miss the high res mode in ie
well flashed it back and all went well had no problems
cjmedina said:
well flashed it back and all went well had no problems
Click to expand...
Click to collapse
could you restore backups without problems?
cmonex said:
here is AP3 version (based on latest Dual) I made that will work properly if you upgraded to new SPL but want to go back to AP3 from the AP4 beta.
(only the kernel needed changes. the rest is the same.)
download:
http://htc-hackers.com/uploads/ap3newspl.zip
IMPORTANT NOTE: this will only work if you ran the AP4 package (prerelease, final (when it comes out) etc.) and your SPL now is version 3.xx.OliNex
if you are unsure about your SPL/bootloader version then check in bootloader/tricolour screen by pressing and holding the camera button (as far as it will go!!) while doing a soft reset - keep the camera pressed until the tricolour screen appears.
Click to expand...
Click to collapse
just 2 questions:
- which is latest SPL version?
- in case I haven't, where to download?
thanks.
Does this mean that if I wanted to go back to AP3 I will not get the extra 20MB space back, and I can not install any of the existing athena roms without risk?
QAN
QAN said:
Does this mean that if I wanted to go back to AP3 I will not get the extra 20MB space back, and I can not install any of the existing athena roms without risk?
QAN
Click to expand...
Click to collapse
my understanding is that the olinex3.xx spl stays with the same available memory .
I and other people tried installing other roms but was unsuccessful and that is why Cmonex had to alter the ap3 to install with SPL3.XX.
I gather it would be possible to alter the other roms to install , but I dont know how to do this
lakeman said:
my understanding is that the olinex3.xx spl stays with the same available memory .
I and other people tried installing other roms but was unsuccessful and that is why Cmonex had to alter the ap3 to install with SPL3.XX.
I gather it would be possible to alter the other roms to install , but I dont know how to do this
Click to expand...
Click to collapse
if you want an old rom, Cmonex correct me if im wrong, all you need to do is extract the nbh file and take the os.nb from ap3 or what ever rom you want and it should work. I am not a pro at cooking roms but thats how i got ap4 on my device and i still have spl 1.2
note: i had to mod the os.nb file so it would fit on the old partition jsuk
can we only have the exe that turns off the auto rotation for the screen?
this is my only problem with the prerelease, it is the best rom i ever had.
thanks boys great work.
thanks for the ap3 for the new spl mine is 3.20 olinex, but no thanks, pre ap4 is the best.
johnripper said:
can we only have the exe that turns off the auto rotation for the screen?
this is my only problem with the prerelease, it is the best rom i ever had.
thanks boys great work.
thanks for the ap3 for the new spl mine is 3.20 olinex, but no thanks, pre ap4 is the best.
Click to expand...
Click to collapse
here is a easy way to to fix it from self rotating. go to file explorer then windows start menu programs, system, then copy the vue orientation go back to windows then copy the file into start up folder exit the explorer then soft reset
irus said:
if you want an old rom, Cmonex correct me if im wrong, all you need to do is extract the nbh file and take the os.nb from ap3 or what ever rom you want and it should work. I am not a pro at cooking roms but thats how i got ap4 on my device and i still have spl 1.2
note: i had to mod the os.nb file so it would fit on the old partition jsuk
Click to expand...
Click to collapse
Will there be a way to install AP4 and still go bo back to factory ROMs if and when needed? e.g. for warranty purposes? I know we've had the usual reasons that they do not check the spl at all, etc, etc but is it possible for it to be an option? In vanilla, perhaps?
@ Irus maybe when AP4 is released you give us a tut on how you did it! (That might help make amends.............. )
irus said:
if you want an old rom, Cmonex correct me if im wrong, all you need to do is extract the nbh file and take the os.nb from ap3 or what ever rom you want and it should work. I am not a pro at cooking roms but thats how i got ap4 on my device and i still have spl 1.2
note: i had to mod the os.nb file so it would fit on the old partition jsuk
Click to expand...
Click to collapse
dear, don't tell people to just go and flash the OS part of AP4 without the new SPL. unless they know how to delete files from the IMGFS to make the OS.nb as small as the original AP3.
your responsibility for making misleading posts where only a small note says what to do to avoid problems
oh and no, you need to do more than just extract the OS.nb, because the old kernel on new SPL will hard reset instead of soft reset.
lakeman said:
my understanding is that the olinex3.xx spl stays with the same available memory .
I and other people tried installing other roms but was unsuccessful and that is why Cmonex had to alter the ap3 to install with SPL3.XX.
I gather it would be possible to alter the other roms to install , but I dont know how to do this
Click to expand...
Click to collapse
correct, the partitioning stays the same. one day I will figure out how to do repartitioning at will but until then to get back to an old rom, you will need to change the NK.exe as I said. only the one from AP4 will work - I patched that one to work (x7510 nk.exe would boot and soft reset properly but would have problems with keyboard interrupt handling).
unless someone wants me to patch another nk.exe, but I don't think that it'd be a problem with warranty, they won't really be able to check the nk.exe version (i.e. can only be done manually).
QAN said:
Does this mean that if I wanted to go back to AP3 I will not get the extra 20MB space back, and I can not install any of the existing athena roms without risk?
QAN
Click to expand...
Click to collapse
no 20MB, for that you have to downgrade the SPL - there will be a package to do that after AP4 final comes out
by the way there is no risk, just the roms will not be able to do a soft reset (just hard), and other small problems such as RUU won't be able to put your device in bootloader (you can still do it manually of course). unless, of course, the RUU enterbootloader.exe is customized to run an SSPL such as in AP4 package - that's just to be more precise before someone chimes in that they've been able to flash back to AP4 from an unmodified AP3 with new SPL already flashed.
Confucious said:
Not sure why people would want to go back to AP3 - but I'm sure someone will and this will help them.
Did you have a good time in London?
Click to expand...
Click to collapse
well the AP4 that was released was still beta, so if someone wants to go back to AP3, they can do it right now, no need to wait.
or if the device has a corrupt OS, they can reflash to AP3 with this, then flash whatever else they want. (though that works already with unmodified AP3 but it's a pain in the ass because of the reset loop thanks to the silly customizations)
oh, yeah, we did have a good time there, thanks for asking
cmonex said:
dear, don't tell people to just go and flash the OS part of AP4 without the new SPL. unless they know how to delete files from the IMGFS to make the OS.nb as small as the original AP3.
your responsibility for making misleading posts where only a small note says what to do to avoid problems
oh and no, you need to do more than just extract the OS.nb, because the old kernel on new SPL will hard reset instead of soft reset.
Click to expand...
Click to collapse
your absolutely right, my apologizes.
Abram said:
Will there be a way to install AP4 and still go bo back to factory ROMs if and when needed? e.g. for warranty purposes? I know we've had the usual reasons that they do not check the spl at all, etc, etc but is it possible for it to be an option? In vanilla, perhaps?
@ Irus maybe when AP4 is released you give us a tut on how you did it! (That might help make amends.............. )
Click to expand...
Click to collapse
no need for tutorial, there will be a vanilla rom
cmonex said:
no need for tutorial, there will be a vanilla rom
Click to expand...
Click to collapse
shes right again
2 for 2 not bad
cjmedina said:
here is a easy way to to fix it from self rotating. go to file explorer then windows start menu programs, system, then copy the vue orientation go back to windows then copy the file into start up folder exit the explorer then soft reset
Click to expand...
Click to collapse
thanks a lot friend.
I have installed WM5SE_4 on my Wizard G4 and it works great. I would now like to try TNT, but when I try to install it, I get ERROR 300. I have tried to reinstall the Cingular ROM, but I still get ERROR 300. I installed hard_SPL-G4, before I installed WM5SE_4. What do I have to do to change this ROM to another?
Replace RUU in the TNT rom with 'MUNS_RUU' or copy and paste nk_nbf folder of TNT rom in MUNS_RUU folder and run the RUU of the MUNS_RUU.You can get the MUNS_RUU from the HardSPL thread.
zabardast_1 said:
Replace RUU in the TNT rom with 'MUNS_RUU' or copy and paste nk_nbf folder of TNT rom in MUNS_RUU folder and run the RUU of the MUNS_RUU.You can get the MUNS_RUU from the HardSPL thread.
Click to expand...
Click to collapse
Wow!! That was slick. Thanks alot!
jphuffs said:
Wow!! That was slick. Thanks alot!
Click to expand...
Click to collapse
Thanz
You are welcome !
I changed ROM on my G4 Wizard to a TNT, then added cube and baterry status for speed it up a little. It was running OK.
It blocked some time after and I am not able to load a ROM again. After reading a lot on foruns I tried Wizard lobe, 5buttons the original ROM and, after 100% loading procedure, the Wizard blocks on the very first page with the IPL 2.21.0001 e SPL 2.21.olip and that is all. I always have to start on the bootload screen (3 colors screen).
I read that as long as I can access the 3 colors I am not bricked.
can you help me?
Tks in advance
GBADCC said:
I changed ROM on my G4 Wizard to a TNT, then added cube and baterry status for speed it up a little. It was running OK.
It blocked some time after and I am not able to load a ROM again. After reading a lot on foruns I tried Wizard lobe, 5buttons the original ROM and, after 100% loading procedure, the Wizard blocks on the very first page with the IPL 2.21.0001 e SPL 2.21.olip and that is all. I always have to start on the bootload screen (3 colors screen).
I read that as long as I can access the 3 colors I am not bricked.
can you help me?
Tks in advance
Click to expand...
Click to collapse
Yes ! as long as it gets into bootloaders (tri color) its safe,but DON"T ever flash a Button's Rom onto it,as its a G3 rom with G3 IPL/SPL,it'll certainly Brick it, if it still goes to bootloaders,I must say you are a lucky guy,it didn't get bricked as you flashed Button's on it.
You must have overclocked it too high thats why it got stuck.Now as it goes to bootloaders and its HardSPL (IPL 2.21.0001/SPL 2.21.olip) flash wizard_love rom,hope it'll recover back,after that flash any wm6 rom of your choice,but don't overclock it too high.
zabardast_1 said:
Yes ! as long as it gets into bootloaders (tri color) its safe,but DON"T ever flash a Button's Rom onto it,as its a G3 rom with G3 IPL/SPL,it'll certainly Brick it, if it still goes to bootloaders,I must say you are a lucky guy,it didn't get bricked as you flashed Button's on it.
You must have overclocked it too high thats why it got stuck.Now as it goes to bootloaders and its HardSPL (IPL 2.21.0001/SPL 2.21.olip) flash wizard_love rom,hope it'll recover back,after that flash any wm6 rom of your choice,but don't overclock it too high.
Click to expand...
Click to collapse
I guess you are rigth. I overclocked with the allowance to float the frequence and did not set an upper limit.
The problem now is - I can get to the bootloader, start RUU flash procedure ( it goes slowly to 100% as usual) and reboot. After that all I can get is the HTC start screem and the wizardlove (the blue image) or TNT Series image without the radio data. It does not move forward to any other action.
With a soft reset it gaves me the HTC and the same image but with the radio data. Before asking I spent a lot of time searching in forum but I did not got to a similar problem.
Many thanks for your support.
Try a Hard reset and remove,if any sdcard or minisd.As it's HardSPL,you cannot flash an official rom also,coz it contains ipl/spl in it,Official rom is only possible after removal of HardSPL,the only way out is to have a working OS on the phone,try to flash any custom build wm6 rom.
Dear Zabardast_1
I tried to flash TNT, Qtek and a brazilian local operator ROM and no way. It always, after the 100% loading, boots and remains on the first screen.
With Farias ROM the same happens. It freezes with the first logo loading WM.
The hard reset shows formating FAT and fail to format.
Do you have any other idea?
Tks for your support.
Good evening board!
I tend to lurk around on the forum as most things tend to go over my head, but I do admire the heavy work you are putting into the site!
I've been reading about the 6.1 upgrade for the Nike and I'm thinking that I can be bothered to wait for orange to pull their thumbs out of their collective bottoms and release a patch/upgrade for the branded touch dual I have. (Thanks fritsypeij!)
I've read through the Wiki pages on here but if I'm honest I'm still none the wiser!
I've removed the security on the phone so I could install a few cabs (Slide Actions, CtoA Fix, Redbox) the most important would of been the Touch flow 2D file.
From what I understand, if I wanted to install the 6.1 upgrade I would need to:
Install Soft SPL,
USPL
and then flash the ROM
I would say I 70% understand SoftSPL, but USPL and HardSPL I don't understand the difference.
Obviously I don't want to risk ending up with a nice shiny brick, so any advice would be amazing!
You're talking about the Touch. It might be that you forgot to add "Dual", else you're in the wrong forum and you will brick you phone for sure
SSPL temporarily unlocks your Touch Dual to flash an USPL *or* HardSPL to your device.
The difference between USPL and HardSPL are, as far as I know:
- USPL gets overwritten if the ROM you want to flash has an SPL included (so every time you flash a new Rom you have to do the SSPL-USPL again)
- HardSPL never gets overwritten unless you flash a new SPL yourself
I hope you get the pic
Succes
fritsypeij said:
You're talking about the Touch. It might be that you forgot to add "Dual", else you're in the wrong forum and you will brick you phone for sure
SSPL temporarily unlocks your Touch Dual to flash an USPL *or* HardSPL to your device.
The difference between USPL and HardSPL are, as far as I know:
- USPL gets overwritten if the ROM you want to flash has an SPL included (so every time you flash a new Rom you have to do the SSPL-USPL again)
- HardSPL never gets overwritten unless you flash a new SPL yourself
I hope you get the pic
Succes
Click to expand...
Click to collapse
Thank you for that (and for spotting my "deliberate" mistake )!
So it would be best to always USPL then? As I read in the Wiki that you should always use the right SPL with the ROM. So if you have an old HardSPL, the rom might not work right. Have I got it right?
Well I braved it and managed to successfully do it!
Had a bit of trouble with the UPSL, but after pages and pages of reading I managed to figure it all out.
Two hours later and everything is installed, cab fixes back on. I think I miss the Touch2d interface but I'll see how it goes. Does anyone if the Touch2D will work on the 6.1 update?
My main bug though is this threaded SMS update. How the hell do you turn it off?! It's horrible! The text is all over the place!
Take a look in this thread (below) for a cab file to install to remove the threaded SMS (it bugs the heck out of me too).
http://forum.xda-developers.com/showthread.php?t=372263
And yes, Manilla2D works just fine on WM6.1. Just follow the instructions properly for the installation and all will be well.
Khrushy said:
Take a look in this thread (below) for a cab file to install to remove the threaded SMS (it bugs the heck out of me too).
http://forum.xda-developers.com/showthread.php?t=372263
And yes, Manilla2D works just fine on WM6.1. Just follow the instructions properly for the installation and all will be well.
Click to expand...
Click to collapse
Thank you very much!
hi, i went to install hard spl v7 onto the phone (windows 7) and next next next.... installing... and im like AHH i have a herming.nbh on the SD card there STOP!!!! so i panicked and closed the hard spl v7 windows on the computer and then the phone said 'starting HERMING.nbh upgrade' and the bar went along and now its stuck and inline with the E and has been for like 10 mins.
HELP WHAT DO I DO
this is what it says on phone
HERMING.nbh -
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
||||||||-----------------------|
EDIT:
it has been like 20 mins since this happened and the bar is now moving along i neerly had a heart attack there... now GSM is OK
EDIT 2:
UPDATE COMPLETE
UPDATE SUCCESS
EDIT 3:
soft reset.... sweet as....
someone delete this before i look like a jackass
too late.....
haha, it must have been changing radio firmware right?
Yep, that is the process that takes the longest and is the most dangerous. Was it a rom you put together yourself or a cooked rom from th wm06 section? Most (if not all) cooked roms have the radio rom removed.
Also be a good idea to install Hard SPL V7 too if you don't have it. CCID can be a ***** and is an unforgiving one at that.
Could be a miracle happened if Hard SPL V7 wasn't installed... - see, they can happen at christmas....
haha, yeah i have 2.10 installed (i believe is the latest)
the rom WAS an official one =) (dopod, found on here)
on another note, is it possible to strip the IPL+SPL and RADIO from roms (if a user-made rom had these for some reason) ?
What would be the benefits?
Would it effect the new OS?
thanks
Most, if not ALL cooked roms don't have the radio rom cooked in. Visit the WM06 section for the latest of those roms...
It is possible to do "surgery" on the rom but you need to download a program called ROM KOCH. Do a search for it, it has all the info in the thread on how to use.... (very old thread)
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..