hi all, just asking for a problem now...
My camera stopped working, i can view only black, black and black
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, when i open htc camera my device slows up a lot, then if i close htc camera all become normal.
So i don't know how to solve this, i hope only that isn't an hardware fault as cmonex said and hope anyone can help me and my athena's camera to live again.
Thanks for reading,
Michele.
Have you tried a hard reset?
For what is worth, my camera also doesn't work - it looks just like yours - black.
I have your ROM installed and I always assumed that is somehow ROM related, but I haven't really tried the camera when I got my Athena (it's not really important for me...) first time I have tried to use it was when I already flashed 1.88 ROM and now with 2.04 ROM.
My camera stopped and i saw just a green screen when i do a soft reset it is start again , i use the micky lastest rom , And in this day I see some buges on camera
it doesn't depend upon my rom, tried to change some roms (original too) but nothing, it remain black
I have been using MiChY's ROM 2.04 MiChY Diamond Edition (5.2.20273, build 20273.1.3.3), camera works normally.
have you tried another camera software like CoolCamera
Time to visit the service centre.
i can't even get my camera to initialise!!!
It was fine until I upgraded the spl in order to play with the new roms. Surely the balance of probabilty would suggest that a hardware failure is less likely than a problem with spl or the rom?
Even downgrading the spl and using michy's rom has not helped
Is it posible to manually install the camera?
i never changed spl. Only installed 1.2 olipro, from there no other change to spl.
I do not remember if my athena has fallen down but i think not.
So this is an internal problem. Now i can view, not only i have this problem too...hope to find a solution
michyprima said:
i never changed spl. Only installed 1.2 olipro, from there no other change to spl.
I do not remember if my athena has fallen down but i think not.
So this is an internal problem. Now i can view, not only i have this problem too...hope to find a solution
Click to expand...
Click to collapse
I would suggest you and the likes try flash back the factory ROM on the device and see if that helps any. If it does from there, you can start fine tuning to see excatly what's going on. Just my 2 cents, and today I noticed some green lines but that might have been due to me focusing on my monitor at work to snap a shot of the webpage I was on. I'm using AP 4.0 with 3.5SPL if anyone's curious. Again just my 2 cents but you guys should give it a shot, just to see if that kicks it back in.
flashed a lot of roms, wm6 original too. nothing, forever the same...
dry joints?
Hi Michy,
Sorry to hear about your problem, I'm not sure that your camera problems are from rom faults as my camera is fine on 2.04. the camera on our units only connect to the mother board via a pressed together joints. This could be what is wrong. Are you brave enough to take your unit to bits? its actualy quite easy if you follow the service manual and have the correct tools, then just whipe the contacts to the camera and board clean with a cotton bud. I had the same fault on another HTC unit and this worked. however it may not though!
Regards
Jay
strange...
when I have the time i'll open it...
but...I noticed that the camera flash works, I think if is this camera's flash do not works...
mah!
WM 6.1 has a policy setting you can use to disable camera among others. You are sure you haven't set this "deny camera" policy?
Probably not as this would be reset when you install a new rom.....
hehe, if my rom have camera disabled, other users could have my problem too
Mine also have this problem....
Anyone can solve this problem??????
responderman said:
Hi Michy,
Sorry to hear about your problem, I'm not sure that your camera problems are from rom faults as my camera is fine on 2.04. the camera on our units only connect to the mother board via a pressed together joints. This could be what is wrong. Are you brave enough to take your unit to bits? its actualy quite easy if you follow the service manual and have the correct tools, then just whipe the contacts to the camera and board clean with a cotton bud. I had the same fault on another HTC unit and this worked. however it may not though!
Regards
Jay
Click to expand...
Click to collapse
Hi responderman,
I have dismantled my Dopod u1000 (athena x7500) to bits a few times. I am having camera problems. But i noticed that the camera is connected to the flash and appears to be soldered onto the main board. I tried wiping the back portion of the camera believing it to be where the cmos sensor is located but did not notice any feedbacks on my lcd screen showing that my wiping action is affecting the camera in anyway. As for removing the camera and cleaning the connections i haven't tried that because as i said, it appears to be connected to the flash and the flash appears to be soldered onto the main board.
Any ideas or info? Thanks!
I also have my camera broken, only after a month I bought it, it started showing some green effect though it barely showed the image, even after hard reset, ROM change there was no change, recently my device fell from a table, and since that I have the same screen as Michy's, most of the time Camera doesn't initialize.
I believe it is camera hardware that is broken.
well i think that too. for that i'm not trying to restore it anymore. if anyone got it to work, plz share
Related
Finally got a whole afternoon free so i decided to get my touch dual(Orange UK version) sorted. Did the HardSPL thing and security unlocking following the instruction and it all went fine. Then I flashed the radio back to my original version (1.58.16.27) and installed Tom's Niki project rom V2.13. Just before I was about to install the applications, I noticed the reception level was very poor.
When in the house, half the time there is no service at all and when it finally picks up the signal, it's only 1 or 2 bars. And it's kind of come and go all the time. But the signal goes to FULL as soon as I take the phone outdoors, even when I'm holding it in my hand and reach it out of the window (worrying I may drop it from the 3rd floor lol). That's a significant drop considering it was at least 3 bars indoor before this afternoon. I then put the original Orange rom back in and it didn't get any better. Then I tried all the radios in this thread and none of them works.
The thing is, I only found out about the poor signal after installing the new rom so I have no clue where it went wrong. It could be any of the 3: HardSPL, Security Unlocking & the new rom. I'm not quite good at this so just wondering if anybody can tell which of the above mentioned 3 steps coursed the problem, and if there is any solutions? It's really frustrating when sitting at home waiting for a call & knowing your phone might not work
Many thanks in advance~
Same problem here. I did the same thing you did. I had just unlocked my device and installed the same radio I had before and my reception on the t-mobile rom was 3-4 bars. After installing Tom's rom it seemed to have dropped significantly to 1 bar or, most of the time, no reception at all. I'm gonna try flashing back to the stock rom in the weekend to see if that helps.
use sedna radio!
try to use gsm or edge only!
NetrunnerAT said:
use sedna radio!
try to use gsm or edge only!
Click to expand...
Click to collapse
Thanks for the reply.
I've tried all the radios, including RUU Nike Radio 1.58.21.23S Modded , and tried to use GSM only as well, and neither of them helps
And can anyone tell me where the GSM antenna is in the picture? And what is that black round thing in between the green circle and red circle if it's not the GSM antenna?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
...
yellow = bluetooth and wifi antenna
red = the external antenna onnector
green = a metal blade thats hide the MSM7200 chip and some other ICs
blue = GSM-Antenna
Valvarin said:
yellow = bluetooth and wifi antenna
red = the external antenna onnector
green = a metal blade thats hide the MSM7200 chip and some other ICs
blue = GSM-Antenna
Click to expand...
Click to collapse
Cheers mate
That explains why it drops to no service when I'm holding the bottom part of the phone in hand.
Now, any ideas how to fix it?
I tried to flash back to original Orange rom with original radio and it's not getting any better. Also tried to re-lock the phone and it doesn't help either.
Send it to service! You have a bad connection to the gsm antenna! possible your phone have hit the ground to much ^_^ possible a damage soldering point.
NetrunnerAT said:
Send it to service! You have a bad connection to the gsm antenna! possible your phone have hit the ground to much ^_^ possible a damage soldering point.
Click to expand...
Click to collapse
I am sure that I have never dropped my phone. But I am afraid that I will have to send it back if what HutcheonS tells is right that swapping back to the previous rom and radio won't work.
I'm quite sure I've never dropped the phone too. And it doesn't look like a hardware issue since it just happened after the unlocking & flashing. Anyway I will take it to orange and see what they can do.
refelian, please do try to flash yours back to the original rom & radio and see how it turns out. It could all just be that I didn't get it right.
OK ... 2 ppls have the same problem!
Please Flash this Full Rom for Tests!
http://www.4shared.com/file/3772443..._13171012_Radio_Nike_1582123_signed_Ship.html
It resets OS and Radio to Factory. If it Works, Flash the Sedna Radio and check Signal Problem again ... then Flash you Favorit OS!
If the Signal is low after the Original Firmware, we must check some Value inside the NVRAM, but i am not sure that we able to fix it!
The GSM antenna is held in place (and electrical contact) but the bottom right hand torx screw (star shaped screw driver needed), as you look at the phone with the back off.
Check that this screw is tight...
I just tried switching back to an older rom and radio. I used the same radio I had before (1.58.16.27) which I got from the radio thread on this forum and a rom build I found in another post.
http://forum.xda-developers.com/showthread.php?t=384963
The rom version is 1.31.404.09and regretfully it didn't work. Still no reception here. Still there were some differences with before when my reception was good. Previously I had a slightly different rom, namely one from t-mobile.
rom version: 1.35.114.07
rom date: 12/03/07
radioversion: 1.58.16.27
protocolversion: 25.61.30.03h
niki200
wm6
ce 5.2.1622 (build 18128.0.4.4)
On both niki project and the original rom I have now installed it says niki100 rather than 200 which it was originally. I don't know if this has any impact but there has to be something which caused the sudden drop in reception.
I don't have a torx screw driver GlenH but the screw you are describing doesn't seem to be loose (although without a fitting screw diver I can't be sure).
Please try a not dumped full niki rom!
NetrunnerAT said:
OK ... 2 ppls have the same problem!
Please Flash this Full Rom for Tests!
http://www.4shared.com/file/3772443..._13171012_Radio_Nike_1582123_signed_Ship.html
It resets OS and Radio to Factory. If it Works, Flash the Sedna Radio and check Signal Problem again ... then Flash you Favorit OS!
If the Signal is low after the Original Firmware, we must check some Value inside the NVRAM, but i am not sure that we able to fix it!
Click to expand...
Click to collapse
Just tried that and it doesn't work
Tried to tighten the screw and the is no difference either
The only thing I haven't reverted back is the HardSPL now. Can anyone tell me how to undo it? May as well give it a shot~
this error have nothing todo with hardspl! its a radio problem!
i write you a little manuel ... i need from you a nv-item dump, then i can compare it. morning i give you a step by step guide!
On a side note, if I want my t-mobile branded touch dual back the way it was (original rom) what's the best way to do it? (didn't make a rom dump of the original btw)
I suppose sending it back to t-mobile would be best, but does anybody have any idea how they generally react to unlocked/flashed devices?
Yeah I think I'm gonna send it back to Orange too. And you need to have it re-locked and flashed back to original rom otherwise the warranty is void.
HutcheonS in case you have not returned your device yet (I didn't), I just installed Tom's new radio found here (the latest one)
http://forum.xda-developers.com/showthread.php?t=369502
And it seems to drastically improve my connection. I used to get no service from behind my pc and now I have 2/3 bars. Which is closer to my old situation. I'm gonna walk around a bit and see how it holds out.
Props to Tom for getting this awesome radio.
Can you make a NV-Item Dump? Possible we see some strange Value!
NetrunnerAT said:
Can you make a NV-Item Dump? Possible we see some strange Value!
Click to expand...
Click to collapse
Sure if you could tell me what it exactly is.
On a side note, I have yet to make a successful call on this radio
Every time I try to make a call, it says after some time that I am connected, yet I can't hear a thing. Internet does work though.
I am using a dutch stock rom btw.
Hi guys,
I'm having serious trouble with my Droid RAZR lately (started like 2 weeks ago).
People have a hard time hearing my while in a phone call, I basically got to yell in the phone for them to hear me
Interesting piece of trivia, as I'm doing some test atm : When I call someone I can hear myself very clearly in my own speaker while it's very very low on the other phone.
So i guess the microphone is working properly from a "mechanical" point of view. I've tried a Skype call, seems ok to me so I guess it's a "software" problem
Does anyone ever encounter this problem ?
Few more technical info, phone is ROOTED Droid RAZR XT910 (GSM, bought in France):
Android 2.3.6
System version : 651.167.22XT910.retail.en.FR (Stock ROM)
Kernel : 2.6.35.7-g24431a2
Build : 6.5.1-167_SPU-15-M2-1-FR
Thank you for your time and help guys.
Cheers,
Boris.
Dian Z said:
Hi guys,
I'm having serious trouble with my Droid RAZR lately (started like 2 weeks ago).
People have a hard time hearing my while in a phone call, I basicaly got to yell in the phone for them to hear me
Interresting piece of trivia, as I'm doing some test atm : When I call someone I can hear myself very clearly in my own speaker while it's very very low on the other phone.
So i guess the microphone is working properly from a "mechanical" point of view. I've tried a Skype call, seems ok to me so I guess it's a "software" problem
Does anyone ever incounter this problem ?
Few more technical info, phone is ROOTED Droid RAZR XT910 (GSM, bought in France):
Andorid 2.3.6
System version : 651.167.22XT910.retail.en.FR (Stock ROM)
Kernel : 2.6.35.7-g24431a2
Build : 6.5.1-167_SPU-15-M2-1-FR
Thank you for your time and help guys.
Cheers,
Boris.
Click to expand...
Click to collapse
Hi, have you ever tried a new Rom? What you did so far to fix this issue? Did you a factory reset? Let me know. Since its working fine on skype this really seems to be a software related issue.
Cheers
Enviado de meu XT910 usando o Tapatalk 2
I haven't done anything yet other that looking for a solution on the Internet and trying to find out if it's a mechanical or software problem.
The microphone holes are in front and back on the RAZR, so I try removing my protective case (which blocks the hole on the back of the phone) but it's the same. The holes are clean btw, no dust or anything inside from what I can tell.
I'll probably back everything up and try a factory reset if no one has encounter this problem before (I thought I would wait for XDA guy's opinion first).
I had the same issue on mine. Just flash the correct Baseband or Firmware for your Region and you'll be fine.
Gesendet von meinem XT910 mit Tapatalk 2
So factory reset right ?
Sent from my Transformer TF101 using XDA
Factory Reset won't change your Baseband. You can try to reset, but the problem would still be the same.
I've flashed another Rom to solve that. To be sure your mic is definitely not defect, try an voice recorder an listen your record
https://play.google.com/store/apps/details?id=de.fun2code.android.voicerecord
In this Thread, you find 2 Fastboot Files. First I've posted got Baseband 93, the second 91.
http://forum.xda-developers.com/showthread.php?p=26893183
Flash that Fastboot, that has NOT your actual Baseband with RSD.
You also can try to flash only the Radio.img over Fastboot. There's an nice Thread in Dev section about this.
http://forum.xda-developers.com/showthread.php?p=20652740
Gesendet von meinem XT910 mit Tapatalk 2
Thx you guys for your replies.
I have some searching/learning to do on how to flash and do all this... or I'll probably end up bricking the thing ^^. Plus I've read somewhere that SafeStrap is only for CDMA version and I got it installed with the rooting process so it's kind of a mess right now.
So I'll set everything straight, get all software needed (RSD etc..) and try to flash a fastboot. I got Baseband version 93P so I'll probably try the one you provided on the thread you linked HSD-Pilot, thx man.
I'll let you know what happens .
Oh and I've tried the voice recorder and it kinda works, only I got to yell in the damn phone for the VU-Meter to move. So it's just like while calling someone.
OK so I just tried flashing a fastboot file, this one:
Code:
SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
I know it's the same baseband (93P) but I wanted to try with the latest version I could find.
No surprise, it didn't change anything.
I'm downloading the fastboot with baseband version 91P (the one provided by HSD Pilot), I'll try flashing this tonight see want it does.
Related question : Is this normal that the fastboot flash didn't remove all my application and all my stuff ? I thought it was a way to get the phone back what it was out of the shop ?
It's no Full Flash Rom, so it won't touch your internal SD.
Gesendet von meinem XT910 mit Tapatalk 2
I just did a flash with the file you provide HSD-Pilot (91P Baseband) and it's the same.
I hear myself in my own phone (very clearly, again... so the internal mic is working pretty well) but the guy on the other side won't hear me if I don't yell in the phone...
I think I'll put in back full stock and return it to the store... don't know what else to do.
Here is some kind pf proof that the microphone works :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's a screenshot from an app that is suppose to find out own much noise the mic is picking up, you can see the min (36 dB) and max value (101 dB) is when I blow air with my mouth where the mic hole is located on the phone.
Im experience similar problem. When I answer with my left ear pepole having hard time hearing me, then I just change ear and they can hear me perfect. Even if I change back to my left ear.
Very annoying!
Anyone else having this problem?
Soulwar said:
Im experience similar problem. When I answer with my left ear pepole having hard time hearing me, then I just change ear and they can hear me perfect. Even if I change back to my left ear.
Very annoying!
Anyone else having this problem?
Click to expand...
Click to collapse
One possibility:
Finally decided to take it back to the shop.
SO I'm getting it back to stock and just "bricked it". I'm having a cdt.bin_signed" -> Phone return FAIL in RSD Lite.
Soulwar said:
Im experience similar problem. When I answer with my left ear pepole having hard time hearing me, then I just change ear and they can hear me perfect. Even if I change back to my left ear.
Very annoying!
Anyone else having this problem?
Click to expand...
Click to collapse
Makes me think, it might have to do with the proximity sensor that cuts off the screen when you cover it. Switching from left to right ears "uncovers" it, the screen turn back on, something to do with the microphone might get altered at the same time and BAM it works fine with your right ear...
Yeah no I'm crazy...
Got out of trouble thanks to this http://sbf.droid-developers.org/
So big thanks to Skrilax_CZ for all those fastboot file !
Hey ppl,
Bought this phone quite recently and to my surprise it has sensors that don't work at all.Now after doing some research I've found out that it could be various problems, but I decided to buy a COMPLETLY NEW PROXIMITY SENSOR off internet.So after I replacing it I haven't achieved anything.This is the picture that I get when i enter *#0*# code and go into sensors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please note that these same values (alltitude stuck at 44000m and etc) were present before and after replacing sensor with new one.Also these values are not moving at all like they should.
So my question is what the hell could this be because I've done some googling and noone really had this kind of problem.What could it be?Something to do with motherboard, software problem or something else.
My earpiece speaker is working, and it is all connecte together (sensor,earpiece its all one part , below is picture of it).If it was indeeed non-working part then probably earpiece speaker wouldn't work either.
Please help if you have any info on this matter
Thanks
malique93 said:
Hey ppl,
Bought this phone quite recently and to my surprise it has sensors that don't work at all.Now after doing some research I've found out that it could be various problems, but I decided to buy a COMPLETLY NEW PROXIMITY SENSOR off internet.So after I replacing it I haven't achieved anything.This is the picture that I get when i enter *#0*# code and go into sensors.
Please note that these same values (alltitude stuck at 44000m and etc) were present before and after replacing sensor with new one.Also these values are not moving at all like they should.
So my question is what the hell could this be because I've done some googling and noone really had this kind of problem.What could it be?Something to do with motherboard, software problem or something else.
My earpiece speaker is working, and it is all connecte together (sensor,earpiece its all one part , below is picture of it).If it was indeeed non-working part then probably earpiece speaker wouldn't work either.
Please help if you have any info on this matter
Thanks
Click to expand...
Click to collapse
My advice is if you replaced it with a brand new one and its still not working it is a software issue. Try and flash stock firmware see if that fixes it.
Funny thing is that today I did that.Went to sammobile website, found stock firmware for my country and flashed it on phone.Everything went okay and process was successful.However readings of those sensor values are still stuck and not moving.
I don't know what else to say.I mean come on, how could this be and how in the world was someone able to screw this much that changing with brand new sensor doesn't help.
Some of ideas that I have that could potentially explain why it is not working are: maybe flex cable is not completely operating that is somehow does not clip all the way and thus not enabling it to work properly.However, it is probably highly unlikely since earpiece speaker is working.
Maybe two holes for sensors are blocking sensors but then again I checked them while I was disassembling phone.
I was seeing people fixing sensor problems with fiddling with some sensor files in system directory, and by adding or modifying certain files in there it resolved their issues.
There must be some solution.Only if I knew how it got malfunctioning in the first place I would knew where to look.
Any suggestiong are very welcomed...
Okay so today I flashed XtreStoLite ROM on my phone hoping that maybe I will fix this problem.However, it hasn't improved it.My last option will be to flash different kernel on my phone.And that will be pretty much it cause I dont know what else to do since you know I mean what else is there really to be done anymore.But I'm really curious who managed to f*ck sensor this much that, how in the world are ppl capable of that.
Anyway, will keep this updating with new news just in case anyone manages to get same problem or something similar so if I somehow am able to get it working again , I'm gonna say what it is.
Cheers
malique93 said:
Okay so today I flashed XtreStoLite ROM on my phone hoping that maybe I will fix this problem.However, it hasn't improved it.My last option will be to flash different kernel on my phone.And that will be pretty much it cause I dont know what else to do since you know I mean what else is there really to be done anymore.But I'm really curious who managed to f*ck sensor this much that, how in the world are ppl capable of that.
Anyway, will keep this updating with new news just in case anyone manages to get same problem or something similar so if I somehow am able to get it working again , I'm gonna say what it is.
Cheers
Click to expand...
Click to collapse
I would reccomend trying arter97 kernel. Its a very good stable kernel.
Hi, I begin to have this exact problem a couple of days ago. Have you solved it?. I've tried everyting related to software and ROM's (not custom ones, and everything without being root) but nothing changes. I would appreciate any help. Thanks.
Hi,
I recently bought a Motorola Moto 360 (2nd Gen) from ebay. It was hard to find, I live in Germany and I couldnt find new watches under 400€. So I bought a watch from ebay which was manufacturer refurbished.
Yesterday it arrived and I really do have some questions and I dont understand some stuff:
1. The seller said it was manufacturer refurbished. But it doesnt look like it was. From ebay's description it should be cleaned, and it didnt look cleaned when it arrived. Besides the glass there is coming out glue which is really hard to remove for me now.
2. A friend also has the watch but did buy it original. My watch has 4 "stamps" on its back (look image). My friend doesnt have those. Also the metal latch to change the band does not exist. How can I change my band now? The software on it says, its model is "smelt". My friends watch just says Moto 360 model.
What the **** is my watch? There is almost nothing of information about that codename smelt.
And also on its front side the bottom part which is not part of display is black of my friends watch, mine has motorola logo which seems to be a small sticker that was glued too much above the display... (image 2).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you need more information, let me know. But please tell me if this watch is some kind of fake moto 360 2nd gen... I am really curious about that.
Seems you have some development version of the moto 360. Check this:
http://www.ibtimes.co.uk/moto-360-android-wear-smartwatch-sequel-codenamed-smelt-likely-pack-high-resolution-screen-1494946
Well that's also not much information, were I tricked?
Am I able to change the bands with that watch?
I found out more stuff now: On this watch is a userdebug build installed of a totally outdated Android Wear Firmware. Is there any way to update it manually to the latest? Because the OTA just says its up 2 date but it isnt.
Changing bands is no problem as all band were like that before the quick release bands became available less than two years ago. This video may br helpful: https://youtu.be/TtPde-M5Xz0
By the way, this is the type of band I use.
I'm not sure a pre-release version of the watch is updatable, but check to see that the version of Android Wear is up to date on your phone.
stevemw said:
Changing bands is no problem as all band were like that before the quick release bands became available less than two years ago. This video may br helpful: https://youtu.be/TtPde-M5Xz0
By the way, this is the type of band I use.
I'm not sure a pre-release version of the watch is updatable, but check to see that the version of Android Wear is up to date on your phone.
Click to expand...
Click to collapse
Updatable via OTA probably not, but is it possible by flashing it? I mean there is no physical input/output on the watch. But is there any possibility when I open the back of the watch and creating an USB cable ?
Is there official up 2 date ROMs on the internet which I can simply flash over the current one?
Edit: I just noticed that my watch is rooted. I wanted to debug the watch via bluetooth and tried to ls /system directory which first failed because of permission. Then I entered su and tried the command again, and it showed me the whole contents of /system partition.
But nevertheless, I am not able to get into recovery. When I power down the watch, hold the power button that long after it vibrates 2 times in row, release the power button, the bootloader appears. In internet they say, by just clicking the power button once for a short time will change the selected option to get for example into recovery mode, but when i click the power button, the watch just shutdowns. If i hold it longer it also shutdowns instantly.
So I am not able to get into recovery unfortunately. So it might probably not even be possible for me to flash another rom even if i would have found the pin's for the usb cable right?
Edit²: As I said i debugged using bluetooth and just came up with an idea. I remembered with adb its possible to reboot into different modes...
Reboot to bootloader, reboot normal, reboot to recovery. And rebooting to recovery actually worked I guess...
I got a screen with android buddy and a red warning signal. Guess what's just missing is a cable that can upload/flash the ROM or a custom recovery to the watch.
Now a question, i found an official moto 360 twrp recovery. I guess i cant flash this to the watch's second generation.. ?!
What is missing now is really just the usb connection
...it is preproduction testing unit and it can have little different hardware
How much did u pay for it?
Sent from my m1 note using Tapatalk
RASTAVIPER said:
How much did u pay for it?
Sent from my m1 note using Tapatalk
Click to expand...
Click to collapse
200€. But I got the money back and was allowed to keep the watch, because it didnt match the ebay description.
Rate this thread to express how you think the POCO M3's Wifi performs. A higher rating indicates that it has excellent range, throughput, and signal strength. Like when you're taking a dump in the bedroom upstairs, do your videos have to buffer or do they come through without interruption?
Then, drop a comment if you have anything to add!
It's a little bit worse than my Redmi Note 7 with a SD660, but it's good enough.
Haven't had any issues to date with WiFi and or data
I found it really good and catch really well my 5GHz wifi signal.
Really good.
Good
in my poco m3 the wifi and bluetooth suddenly got very weak signal, does anyone know how to solve this problem?
lucascerqueira said:
in my poco m3 the wifi and bluetooth suddenly got very weak signal, does anyone know how to solve this problem?
Click to expand...
Click to collapse
My M3 doesn't have wifi problems, except that the maximum downloading speed is only about 100Mbps.
Bluetooth works very well on my M3.
Maybe you can try updating MIUI, or factory reset, if both don't work, maybe you need to bring it to Xiaomi service center?
cbw said:
My M3 doesn't have wifi problems, except that the maximum downloading speed is only about 100Mbps.
Bluetooth works very well on my M3.
Maybe you can try updating MIUI, or factory reset, if both don't work, maybe you need to bring it to Xiaomi service center?
Click to expand...
Click to collapse
on Brazil hasn't a xiaomi service center, my M3 got very very weak signal on wifi/bluetooth, already did factory reset about 5 times and nothing, it's very annoying
lucascerqueira said:
on Brazil hasn't a xiaomi service center, my M3 got very very weak signal on wifi/bluetooth, already did factory reset about 5 times and nothing, it's very annoying
Click to expand...
Click to collapse
If it is hardware's issue, there is nothing you can do other than bringing it to service center for repairing.
If you still want to try fixing it with software, you can unlock the bootloader, and then use Mi Flash tool on a computer to flash the fastboot ROM, with the clean all and lock option.
cbw said:
If it is hardware's issue, there is nothing you can do other than bringing it to service center for repairing.
If you still want to try fixing it with software, you can unlock the bootloader, and then use Mi Flash tool on a computer to flash the fastboot ROM, with the clean all and lock option.
Click to expand...
Click to collapse
the issue begun on miui 12.0.6 update, before on 12.0.4 and 5 wifi/bluetooth was fine with a good reception, somethimes the issue simple goes away and after a week or two goes back with weak wifi/bluetooth, me and some m3 users have this issue with the same way
cbw said:
If it is hardware's issue, there is nothing you can do other than bringing it to service center for repairing.
If you still want to try fixing it with software, you can unlock the bootloader, and then use Mi Flash tool on a computer to flash the fastboot ROM, with the clean all and lock option.
Click to expand...
Click to collapse
EDIT: duplicate post
Rooted ?
Noru29 said:
Rooted ?
Click to expand...
Click to collapse
nop, don't want to lose miui find device service
I'm rooted and MIUI find device service works perfectly...
Very good when compared to other smartphones at the same price.
sometime wifi too weak. I dont know why
Samsung a11
And m3 phone
I am facing poor wifi reception in Poco M3 ( India). This happened suddenly.
lucascerqueira said:
in my poco m3 the wifi and bluetooth suddenly got very weak signal, does anyone know how to solve this problem?
Click to expand...
Click to collapse
Same here
I am also facing low wifi strength issue on my Xiaomi POCO M3,
suddenly the wifi connection range is decreased too much its even weaker than redmi 7 (INDIA)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
POCO M3 below