i downloaded the a WM6 software and the ruuwrapper and the Hard Spl v7. I flashed it but nothing happened . Need help
Hold down power button, ok button and reset with stylus. Hold in until tri-colour (bootloader) screen comes up. This should tell you what SPL you have. Should be 2.10 oli...
If you have Hard SPL installed, you can use the sd card method to flash your rom. This is a must if the radio rom is part of the rom you are flashing - generally only in stock roms.
You must have a 2Gb or less sd card formatted FAT32.
1. Format Sd card FAT32. Copy .nbh file on and rename to hermimg.nbh.
2. Insert sd card in Hrermes and reset to bootloader.
3. Follow instructions.
Easy as 1,2 & 3....
Cheers...
Related
hello,
my usb connection failed at the beginning of the update to wm6 = i try several hard reset and the defaut settings are implemented but when i reboot i'm stuck to the beginning screen (htc with the logo) = any idea before i have to ship my x7500 to SAV ?
thank you
david
try to get into boot loader mode and try from there
i think its camera , vol down, reset all at the same time
bootloader:camera+commanager+reset
else, tryfrom sd card:
Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+com manager+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD. After finished, do a soft reset.
it's very detailed procedure . Put miniSD card to the unit do BL mode - it will start ( if your unit is CID unlocked for all ROM's) or for not unlocked - only CID passed ROM
cmauconduit said:
bootloader:camera+commanager+reset
else, tryfrom sd card:
Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+com manager+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD. After finished, do a soft reset.
it's very detailed procedure . Put miniSD card to the unit do BL mode - it will start ( if your unit is CID unlocked for all ROM's) or for not unlocked - only CID passed ROM
Click to expand...
Click to collapse
Strange that I followed the above steps but the in bootloader, the ATHEIMG.nbh files is just not being read and loaded. The card was formatted in FAT32 already.
I just see the word "serial" at the bottom of the boot loader screen.
Anyone knows what I might have done wrong?
ok i am totally new in this row thingyy
i have downloaded this rom :OS 5.2.20273 (Build 20273.1.3.3 PV DVH) Diamond(Full) V19
my current rom is :1.20.305.3
radio version is : 1.47.00.10
protocol version : 32.80.7020.20H
extrom version : 1.20.305.104
no the question is is this rom ok for my jasjam if yes how to install it
and if no then which one is better ?? same how to install it help me plzzz
Yes its ok...
1St read this - http://forum.xda-developers.com/showthread.php?t=296722
then INSTALL HARD SPL V7.....(check out page 116, post 1160 to use the sd card method - I find it safer and have no sync problems unlike usin the pc). Just make sure you have more than 50% battery power if you use the sd card method.
Then you can install your new OS. just unrar/zip the file. sync your phone with active sync and double click on the RUU_Wrapper.exe file... Follow the prompts...
I prefer the sd card method, I find it safer. This is slightly different than installing Hard SPL using the sd card...
1). Format a 2GB or lower sd card fat32. Copy the RUU_signed.nbh onto it and rename to "hermimg.nbh".
2). Insert sd card in phone and go to bootloader (hold power button, OK button above flywheel and reset with stylus. Hold until you get to tri-colour screen).
3). It should recognise the Hermes flash file, just follow the prompts.
YOU NEED TO HAVE HARD SPL'ED YOUR PHONE TO DO THIS.
Happy Flashing & Welcome...
(sorry for d bad english)
i have a jasjam.. i had dopod 838 pro before n i always upgrade it to 6.1... but this time i was on v8 manila 2d rom then i want to change it to phamquang v20 rom. while upgrading i think 4% error 302 occur.. then after this.. my phone was bricked.. it reach d 1st logo screen(htc screen) and stuck always there.
can someone help me? all reply will be appreciate...
mine is :
ipl: 1.04
spl: 2.10 olipro
Try the sd card method to fix.
1. Format sd card fat32 and copy the .nbh file onto it. Rename to hermimg.nbh.
2. Insert card and reset to bootloader.
3. Follow on screen directions.
Should reflash the OS, just remember to have more than 50% battery power and backup your sd card so you can restore it before you flash. SD card has to be 2Gb or less.
Cheers...
sdcard upgrading
man i already follow sd card upgrading but nothing happened when i get onto bootloader screen.
2 things to check, the .nbh file MUST be named hermimg.nbh with no spelling errors. The sd card MUST be 2Gb or less and HAS TO BE FORMATTED FAT32. It comes formatted FAT.
To get to bootloader, hold power, ok button above flywheel and reset with stylus. Hold in until tri-colour screen appears.
I know you are familiar with it but others who read this may not be.
Most people who say that it doesn't work have the one of the 2 things I mentioned set up wrong, mostly they don't format the sd card FAT32 as they assume its already formatted like that. I also found, on occsion, even though I had formatted the SD card \fat32 that it required formatting again.
Hope this helps.
Cheers...
dear all
no gsm,no radio,no imei
i can't flash any rom include Original rom of dopod 838pro asia
my device is dopod 838 pro
i got
HERM100
ipl 1.01
spl 1.40
but i can't flash anything
i read carefully from wiki but it doesn't give me a solution...
i always get 0% stuck and connection error message
maybe last solution Flashing via JTAG...
but i have a problem i don't understand what are JTAG for???
anybody can help me To explain or give me instruction what is JTAG??
thanks...
sorry for my english because i;m indonesian
To Install Hard SPL V7.
Untick "Allow all usb connections" in Activesync on pc.
Go to bootloader on Hermes. Connect Hermes to pc.
Download Hard SPL V7 from here -http://forum.xda-developers.com/showthread.php?t=296722
Run RUU_Wrapper.exe of Hard SPL V7.
To try to recover the Radio ROM.
Find SHIPPED Stock ROM. Download.
Use sd card method to flash to Hermes.
SD Card Method.
1. Format 2Gb or less sd card FAT32.
2. Copy .nbh file to it & rename to hermimg.nbh.
3. Insert sd card into Hermes, reset to bootloader and follow instructions.
Flashing stock rom may take up to 30 minutes. DON'T INTERRUPT THE FLASH.....
Cheers...
ultramag69 said:
To Install Hard SPL V7.
Untick "Allow all usb connections" in Activesync on pc.
Go to bootloader on Hermes. Connect Hermes to pc.
Download Hard SPL V7 from here -http://forum.xda-developers.com/showthread.php?t=296722
Run RUU_Wrapper.exe of Hard SPL V7.
To try to recover the Radio ROM.
Find SHIPPED Stock ROM. Download.
Use sd card method to flash to Hermes.
SD Card Method.
1. Format 2Gb or less sd card FAT32.
2. Copy .nbh file to it & rename to hermimg.nbh.
3. Insert sd card into Hermes, reset to bootloader and follow instructions.
Flashing stock rom may take up to 30 minutes. DON'T INTERRUPT THE FLASH.....
Cheers...
Click to expand...
Click to collapse
Thanks a lot
i was try flashing from sd but what i got?
progress bar still no working??
it this Normal??
or something wrong with my device???
i try flash via activesync and bootloader "HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship"
with modified RUU but it still 1% progress bar show
what wrong with my device??
i really hope u can fix and help me to unbrick my devices...
ultramag69 said:
To Install Hard SPL V7.
Untick "Allow all usb connections" in Activesync on pc.
Go to bootloader on Hermes. Connect Hermes to pc.
Download Hard SPL V7 from here -http://forum.xda-developers.com/showthread.php?t=296722
Run RUU_Wrapper.exe of Hard SPL V7.
To try to recover the Radio ROM.
Find SHIPPED Stock ROM. Download.
Use sd card method to flash to Hermes.
SD Card Method.
1. Format 2Gb or less sd card FAT32.
2. Copy .nbh file to it & rename to hermimg.nbh.
3. Insert sd card into Hermes, reset to bootloader and follow instructions.
Flashing stock rom may take up to 30 minutes. DON'T INTERRUPT THE FLASH.....
Cheers...
Click to expand...
Click to collapse
thanks
i've follow that instruction flash via SD but on my hermes screen progress bar still stuck...it is normal??all ok but at radio and os still nothing...
i try to put HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship at formatted Fat32 sd card and i renamed it .nbh to herming.nbh
please help me for a solution
thanks
Okay, so today I purchased a Hermes. While it'll take a while for it to arrive, I want to be prepared. And I certainly don't want a brick. So I'm pretty paranoid. That's why I'm asking, is the following procedure correct? (It's basically what I found here)
Download HardSPL
Download the ROM
If I have HardSPL (which I doubt), skip step 4
Install HardSPL
Sync and connect (with USB-cable) using WMDC*
When sync is finished, run RUUWrapper.exe
Follow the instructions (accept, next, accept, next, update)
Flash
Sync and connect (with USB-cable) using WMDC*
When sync is finished, run RUUWrapper.exe, the one shipped with the ROM
Click AutoDetect
Follow the instructions (accept, next, accept, next, update)
"Enjoy my updated device"
Download and install the .cab-files provided by Torben here. (Or should I change the registry?)
*I've read that there are some problems when syncing with Vista (which I, against my will, is stuck with), is this still present when using WMDC instead of ActiveSync?
Thank you for taking time helping a confused noob!
Mate, if you have a problem with using the PC, use the SD card method (must have Hard SPL V& installed - SPL - 2.10oli). To install Hard SPL using the Sd card method, go to page 116, post 1160 on the Hard SPL thread. It has links and the method to install hard SPL using the sd card method.
For ROM's use this method -
1. Format sd card (2Gb or less) FAT32.
2. Copy .nbh file of the rom you want onto sd card and rename to hermimg.nbh .Insert back into Hermes.
3 Put Hermes into bootloader - hold power, OK button above flywheel and reset with stylus, hold ALL buttons in until you get to tri-colour screen. If you have done everything right, follow the prompts.
Cheers...
But then I would have to buy an extra memorycard for the outragous prices of $7. But, I suppose I'll have to... Thanks for your reply!
Horrors......
Okay, I read the post. Very good! Just to make sure, I should not copy the RUUWrapper bundled with HardSPL? I add SSPL_HERM.exe and HERMIMG.nbh to the root of the newly formatted (FAT32) SD-card (not SDHC), run SPPL_HERM.exe from the phone, press the powerbutton when instructed to (to flash) and then reset the device somehow, once it's done. After that, follow the instructions here (phone connected to charger since it takes 30 min) and then all be fine?
(Yepp, I'm a pretty paranoid creature)
I just thought I'd reply to this message because I'm about to flash a custom Rom to a new iMate Jasjam and that my user id is errily similar to yours
I've used a 2GB Micro SD card to flash my last ROM upgrade (thanks to CRCinAU) and it worked a treat.
Cheers!
Oggy.
On my device (MDA Vario II) it stops at the bootloader screen (tricolor), and nothing happens.... but my device is not bricked, if i call softreset everything works, but i need hard spl to use an unlocker .... (which is also not working right now)
Did you run sspl.exe from the phone first?
You need to run this as it puts Soft SPL on so you can flash Hard SPL BUT you need to run it from the Hermes and not the sd card.
To get out of bootloader just reset with stylus.]
Also check that the sd card (2Gb or less) is formatted FAT32, comes formatted FAT by default.
Make sure you have renamed .nbh file to hermimg.nbh. Spelling matters...
Cheers...
jep done as instructed, still the same problem
What happens if it's not formatted FAT by default? If I can format a card as FAT32 but wasn't FAT originally, would it possibly brick it? (Not doing it (hopefully), just curious)
okay got it, cards broken, i think, used a new one
Doesn't matter if it was originally FAT32, most sd cards come formatted FAT by default, it has to be FAT32 or the flash WON"T work...