Hey GUYS please HELP ME
I have followed the Guide to root the xperia x10 in this forrum. So here is what happened. After completing step 3, it all went fine but then the thread says I have to install the Market fix for X10i users. After done that, my phone restart and it won't let me to go inside. It has a weird picture.
Anyway, can you guys please tell me to unroot or whatever to gain the access to the phone again? I tried the phone repair from PC suit to flash the x10 but it doesn't work anymore.
PLEASE HELP ME ...
we have the same problem mate pls. help us.....
c'mon xDA Developers!!!!!!!!!!! My phone is now relying on you guys
Reflash your phone using the flash unbrick tool and redo rooting steps
Just re-root from step 1 and your fone will be fine.
The PC com cannot work anymore cuz your region does not support FW update higher than 023. If you finish step 2, your fone FW ver is 023 already.
NO it's not that Simple. If I was able to flash back my device then I wouldn't post this thread. Please look at my pictures that were attached. In the CMD window, it says Unable to open channel, Getlasterror= 0"
I think there is no way to get inside the phone ....
Check if i did anything wrong
Ok HERE Is what I did (Refer to the pictures)
kelvin103 said:
NO it's not that Simple. If I was able to flash back my device then I wouldn't post this thread. Please look at my pictures that were attached. In the CMD window, it says Unable to open channel, Getlasterror= 0"
I think there is no way to get inside the phone ....
Click to expand...
Click to collapse
Why you just not simply use the Forum search ? That error has been described numerous Times. Also the Solution has been posted many , many Times.
1st i had the problem..but the 2nd time i did all fine,u hv to reflash the 1st root..and do it again..try.
Sent from my X10i using XDA App
Higgins12 said:
Why you just not simply use the Forum search ? That error has been described numerous Times. Also the Solution has been posted many , many Times.
Click to expand...
Click to collapse
Why Can't u stop all the useless posts? If I was able to find them then I wouldn't post this thread here. Im sure that U just say that but in fact u don't know anything mate
Please re-check your device ID and make sure its right in your DeviceID.txt file. If it is wrong then you will get a device not found error. Remember it will change everytime you change USB slots.
Check your Device Id if you have more than one!LOL Fate was faster!
Have you tried it with Omnius?
THE PROBLEM IS NOT FROM ANY OF THAT... AFTER RESTARTING MY PC and UNINSTALL THE PC COM and PC SUITE... IT WORKS !!!
Thanks guys!! Helping me alot...
mine is going back to 023 now...the solution is i rooted my phone on my other computer and the device id is completely different when i first rooted my phone on my other computer.....thanks for the help mates....
recovery
Hi,
just wanted to let you know it turned me onto a path that helped me get my " Stuck on Sony Ericsson" screen: i work with Linux and i had to use PC compnion to restore the phone which worked!!!!!!!! now reinstalling another custom rom.........the Dark Edition HD is the one that (nearly) bricked mine so , no, not that one
thanks again.........
Reflash with Seus? Pc companion
Just a Question to increase my knowledge. Why do people use that old methods to root x10's ? Why not use simple ON CLICK in app called Flashtool ? I've used that method many times and it's fastest, safest possible way to root, flash ROM's etc ? am I missing something ?
This thread should be in the q&a section
Sent from my X10 using xda premium
For that screen, I'd recommend either using seus to repair your phone first, then if that didn't work, try downloading the flash tool and DoomLord's prerooted recovery image or stock firmware in the. Ftf file type and flashing those via flash tool. That should help somewhat but if you can't get anything after that then take it back to the store. the moment you can get it to boot to the kernel screen, you're fine since you can just wipe and install a new ROM. Best of luck! Tell me how it turns out!! :-D
Galcactus
Sent from my X10S using XDA
WHY YOU GUYS REPLYING TO A THREAD THAT IS NEARLY 2 YEARS OLD
CLOSED.
Related
Hi! I have no idea now what to do, so I decided to ask here. I'm already very depressed because I can not find a complete solution
When I installed the CyanogenMod 7 phone will not boot. Is suspended at startup (logo CyanogenMod) and nothing more I can do I have read many manuals, but none has not helped me. Apparently you need to do recovery (?), But when I try to run this menu, nothing happens and the system tries to run. At first I thought it was enough to wait, but even after several hours, nothing moved, and the phone became useless Can I do something about it? Is there anyone here who can I explain it as simply? And please do not refer me to other instructions, because it can not much.
It would be good if the aid was in the Polish language, but of course also happy to get help in English
neXt___ said:
Hi! I have no idea now what to do, so I decided to ask here. I'm already very depressed because I can not find a complete solution
When I installed the CyanogenMod 7 phone will not boot. Is suspended at startup (logo CyanogenMod) and nothing more I can do I have read many manuals, but none has not helped me. Apparently you need to do recovery (?), But when I try to run this menu, nothing happens and the system tries to run. At first I thought it was enough to wait, but even after several hours, nothing moved, and the phone became useless Can I do something about it? Is there anyone here who can I explain it as simply? And please do not refer me to other instructions, because it can not much.
It would be good if the aid was in the Polish language, but of course also happy to get help in English
Click to expand...
Click to collapse
first of all,
which phone do you have ? (mini or minipro ? )
which rom did you flashed?
which kernel are you using?
then, i'll see if i can help you
PS : dev forum isn't the right place to ask...
post in the "Q&A" forum from now on, pleaseeeeeee
buddy, please post these questions in the Q&A forum....you are spamming the development thread.
as of your problem, u can do two things,
a) use SEUS and reinstall 2.1update 1 from SE (click support zone, click phone software update and then click "repair phone" and re-root your cell from start
b)use the x10 flasher tool from xda,download the E10i_2.1.1.A.O.6_Generic.zip from the net, extract contents and copy them to the firmware folder of the x10 flashing tool....connect your phone in flash mode when asked and your done
gimme a Thanks if this helps you
achyut said:
buddy, please post these questions in the Q&A forum....you are spamming the development thread.
as of your problem, u can do two things,
a) use SEUS and reinstall 2.1update 1 from SE (click support zone, click phone software update and then click "repair phone" and re-root your cell from start
b)use the x10 flasher tool from xda,download the E10i_2.1.1.A.O.6_Generic.zip from the net, extract contents and copy them to the firmware folder of the x10 flashing tool....connect your phone in flash mode when asked and your done
gimme a Thanks if this helps you
Click to expand...
Click to collapse
....
if he just tried to flash miniCM7-2.1.1 with a stock kernel he just needs to unlock his bootloader, and then flash nAa's kernel and then reflash (no need to start from SEUS many problems can be solved without SEUS)
I'm sorry, probably not I noticed a good place to put questions :/
I have x10 mini pro
Cyanogenmod 7(?) I'm very noob in this topic.
Just as in the above question ^ ^
@achyut
SEUS does not work, I can not connect the phone with him
neXt___ said:
I'm sorry, probably not I noticed a good place to put questions :/
Click to expand...
Click to collapse
here you are in the MINI dev thread... not PRO.
the Q&A for both phones is here
so wrong place, wrong phone
...
could you to link the rom you are using?
You' ve probably flashed the 7.1.0/7.1.1 without follow all the required steps... I agree with friend that told you to unlock the boot loader, then install nobody'satall custom kernel and then reflash the rom! Also once i had the same problem... It caused because i didn't have made wipe/factory data reset! i pressed the power off button and the central key together in order to stop looping and reboot the phone...
I have to wait until someone moves on, or start a new topic in the right place? Once again, sorry
Probably the "use" the latest version of CyanogenMod. CM v10.
What should I do?
neXt___ said:
I'm sorry, probably not I noticed a good place to put questions :/
I have x10 mini pro
Cyanogenmod 7(?) I'm very noob in this topic.
Just as in the above question ^ ^
@achyut
SEUS does not work, I can not connect the phone with him
Click to expand...
Click to collapse
first , take out the battery . Then plug it back . open SEUS and choose mini pro .
after than press the back button and plug usb into ur phone . ( don power on ur phone in the process and don release the back button before SEUS telling u so ) .
after ur phone is detected juz install the stock 2.1 rom .
Hello XDA members
2 weeks ago i bought a brand new Neo V and fully updated it from SEUS
1 week ago i started reading your forums [facepalm]
Yesterday i followed a series of tutorials on the Neo V Development forum and i managed to brick my phone [facewall!!!]
What i did :
1) Download lots of stuff!!!
a) .42 ftf file from here : http://forum.xda-developers.com/showpost.php?p=19808360&postcount=3
b) flashtool from it's original website
c) DoomKernel's rooting script
d) CWM script from here : http://forum.xda-developers.com/showpost.php?p=19733978&postcount=1 (the 1st way)
e) S1tool from here : http://forum.xda-developers.com/showpost.php?p=18013064&postcount=44
2) Use them ALL!!!
a) Install and extract where necessary
b) put .42 in C:\flashtool\firmware
c) put everything else in C:\SETools\ to act tidy
3) Feel like McGuyver!
a) used needle & wire to unlock bootloader with s1tool [success]
4) Take the big step!
a) flash .42 firmware with flashtool [all OK]
phone took it's time to reboot, scared me to death! at least 4 full minutes :/
b) use flashtool to root from the Advanced>Root>ZergRush menu [Fail]
it seems flashtool failed after first part.
c) used DoomKernel's script and rooted phone [all OK]
d) reboot and enjoy! [all OK]
.42 firmware was ok, root ok, boot was slow.. other than that everything worked. (except market, could not download anything!)
e) used Upgrade Service from phone menu and found .62 OTA upgrade. [Failed]
phone downloaded the new firmware, i pressed install, that was it.
And thus my Neo V rebooted to complete the upgrade to .62
The upgrade was never completed, the phone never turned on again.
No SE logo, no led, no nothing!
Everytime i press the power button nothing happens, if i keep it pressed for some time the led flashes green every second.
Everytime i connect it to the PC usb it goes to flash mode on it's own, no back key pressed.
When plugged on charger led flashes green every second.
Last thing i tried was to reflash it (since it went on flashmode) with .42 again.
Nothing there
Still, i would like to see it alive once more since 200 euro for a green led is not really a bargain
Any help appreciated!!
Ok if the pc recognizes it you should be able to resurrect it with pccompanion, seus or wotan client
Sent from my MT11i using Tapatalk
Will try, though phone is not really recognised..
it functions only as when turned off and pressing back button while connecting to pc usb.
EDIT : Installed SEUS again and tried to do an upgrade (only option available through support zone)
Failed first couple of times, then it popped up a new window asking to repair since update is not working.
Asked me phone model and downloading ATM, will report soon
EDIT 2 : Nothing with Pc Companion or SEUS. It reflashed the phone with .62 firmware but the phone is in the same state.
About Wotan Client, i would love to try it but i have no idea how to install it or run it, it asks for credits and i don't think reflashing will help in this case.
wotan flashing is free bro, just download their client and follow steps most probably u will get ur fone back to ur life. best of luck !
Just a thought, the phone acts as if the back button is constantly pressed and i find that VERY weird..
Also, SEUS discovers the phone as "Sony / Sony Ericsson" (?), is it possible that this has to do with the s1tool driver i installed before while unlocking the bootloader?
wow, thats what i call entire history of your phone
anw you experienced OTA brick. because you have unlocked bootloader.
strange, some people get brick some don't, with un-official(s1tool) method.
but with official, everyone get brick.
Madfysh said:
wow, thats what i call entire history of your phone
Click to expand...
Click to collapse
Thanx
I think asking people to help you requires you to help them too so yes, history is all i could do!
Madfysh said:
anw you experienced OTA brick. because you have unlocked bootloader.
Click to expand...
Click to collapse
OTA brick? The tutorials i followed requested me to upgrade with OTA to have .62 with root. Where they wrong?
Dodo_the_Bird said:
Thanx
I think asking people to help you requires you to help them too so yes, history is all i could do!
Click to expand...
Click to collapse
wow, if only more people would br like you
Dodo_the_Bird said:
OTA brick? The tutorials i followed requested me to upgrade with OTA to have .62 with root. Where they wrong?
Click to expand...
Click to collapse
they werent wrong, but if I think on which tutorial you mean, it says its for people with locked bootloader.
now when you have unlocked bl, your life is easier
you can simply use custom kernel which have root included in itself
go to dev section, you can use galaxian or bbooff kernel.
while you are there check sticky threads to see how to flash kernel.
after you read those, ask if you have any question.
---------- Post added at 12:55 AM ---------- Previous post was at 12:52 AM ----------
http://forum.xda-developers.com/showthread.php?t=1496102
http://forum.xda-developers.com/showthread.php?t=1520516
Thank you all SOOOOOO much!!!
Wotan worked, my phone is up and running on .42!!!
So now about tweaking a bit, those kernels support official roms only,
if i wanted to go for something more goodlooking, faster, nicer.. what would you suggest?
No, those kernels arent only for official rom's.
And about custom roms, I'm not the one to talk about it much, as I'm not so much into custom roms dont have enough time to test them.
so you will need to go trough development section and find something you like. remember you can also look in neo section, most of the roms can work on your phone with minor modifications.
also remember, first read then install
So.. i managed to have a working phone and now i am trying to flash galaxian.
i went on cmd, started fastboot with appropriate command and plugged in phone pressing the menu button.
Now in device manager i can see "S1boot Fastboot" and it is not recognised, what am i suppossed to do????
-turn off your phone.
-hold menu key(the right one )
-connect cable
-you should see blue light on led on the side, do you see it?
-go to folder where you have fastboot.exe file
-hold shift key and right-click of mouse anywhere in that folder except on files
-sellect start comandprompt here(or something like that)
- type fastboot devices
-tell if it says something.
Seems like you didn´t install drivers for fastboot...
i thought they are included in adb drivers !?
Well i have installed the whole android sdk with it´s drivers.
As long as it is unrecognized in Windows (no drivers installed) S1Tool has no Chance to detect it
Dodo_the_Bird said:
So.. i managed to have a working phone and now i am trying to flash galaxian.
i went on cmd, started fastboot with appropriate command and plugged in phone pressing the menu button.
Now in device manager i can see "S1boot Fastboot" and it is not recognised, what am i suppossed to do????
Click to expand...
Click to collapse
u havent installed the correct drivers, connect the phone again in fastboot mode, go to device manager, select s1tool fastboot, click update driver, browse for it manually and point it to the the folder in which you have fastboot, done.
Wow! Wotan client can unbrick a phone that bricked with OTA?
Sent from my MT11i using XDA
If you dont want to brick phone with new custom kernel, use ,,hotboot,, function.
That should boot phone with new kernel one time.
If you dont like kernel, just reboot your phone
Sorry for English.
talk about good memory i pity u LoL btw good luck on flashing ur phone and yeah i brick my neo a while back and have to search on google for 6 hrs then fix my neo for half a day thats 12hrs in real life now im happy that im d only in my family tree and clasm8 know how to flash a brick phone hell yeah im proud of it anyways gudluck
Sent from my MT15i using xda premium
soybi said:
Wow! Wotan client can unbrick a phone that bricked with OTA?
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Yep
I hit the level 100 brick twice or thrice
Wotan server really helps
I bricked my phone yesterday after doing OTA( bootloader unlocked by testpoint method)...wotan server got it back alive and kicking
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
ok, so u cannot flash back to stock with flashtool?
concerneth iconfa
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
can you connect into fastboot or flashmode?!
Looks like someone got a crappy cable.
Try replacing it, my old cable used to crap on me too.
An improper Kernel or even a bootloop should not prevent you from getting into fastboot mode and reflashing.. Pixelado might be right..It could be a faulty cable or a loose connection.. try another cable or another computer maybe to check..
To better understand, tell us, did you follow that root guide that says:
Downgrade kernel to a 4.0.3 one -> use Doomlord exploit, re-upgrade to stock 4.0.4 kernel?
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
Download your ROM Stock FTF and Flash on Modo Flashboot with Flashtools.
I follow this method to root my phone.. Its simple and easy to follow..
http://forum.xda-developers.com/showthread.php?t=1701357
if anything goes wrong just go to flashmode(pressing powerbutton+vol key down).. and reflash the stock ftf file..
it doesn't matter your phone get started or not you can still go to the flashmode .. :laugh:
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
Hmmmmm...perhaps you might give us more info so everybody can help you out.....
Atleaset give us a proper info like....
1.What version is your XMP (Gingerbread or ICS) & it baseband........
2.Did you unlock your phone bootloader or not.......
3.What kernel did you flash into your phone.....
4.Which tutorial did you use to flash/root your phone........
Look in this: http://forum.xda-developers.com/showthread.php?t=1695514 thread to root your phone with ics
If you want gingerbread back first, just check out the rooting guide in my signature
Sent from my SK17i using xda app-developers app
Greetings!!!!
http://forum.xda-developers.com/showthread.php?t=2265805
i think i just ruined my phone
i made a huge mistake, i have mistakenly installed the zip file provided by the good man above on the link
the first instruction was to FLASH KERNEL PROVIDED FROM ZIP
and i INSTALLED it USING CWM
i guess FLASH and INSTALL does not mean the same thing. i am sorry, i am a newbie
please help me fix my phone
i am stuck at the SONY logo, it keeps flashing and flashing it
i connected it to my PC to attempt repair using PC Companion, my PC did not detect anything
I am trying to boot to recovery, but i do not know the keys to press
i searched for it but, nothing works for me
PLEASE HELP ME
PLEASE
I have a sony ericsson xperia neo v mt11i
i have successfully rooted it
i have also successfuly installed the Clockworkmod
Idk about your phone, but 'til you are waitinh search for your phone/ download mode. Check if you have this. It solved my problem like yours
Sent from my GT-I9000 using xda premium
please explain
Zahovay said:
Idk about your phone, but 'til you are waitinh search for your phone/ download mode. Check if you have this. It solved my problem like yours
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
can you please explain it, step by step,
because im a newbie, i just studied this rooting and custom ROM things in two days
i think its not enuf huh.
thanks for the suggestion
Download mode can be achieved by first
power off your device
Try a combo of power and one of the volume buttons
When the buttons light up keep holding till you see a yellow triangle
From there plug into your PC
Then attempt to "flash" back to a working ROM with your PC
For my device(s) download mode is found by using the #1 button on the hard keyboard and the power button at the same time (epic 4G) and for my (my touch 3G) other device it can be found by pressing volume up and the power button.
For your device try the following Google search, just replace the bit between the "<>" with the name of your device and it should pull up a solution by page two of the Google search
"how to"+"download mode"+<name-of-device> similar:XDA
oh and the issue you're having is called a "boot loop" and is usually fixable by going back to stock and re-rooting after.
Sent from either my SPH-D700 or myTouch3Gs
Debian Kit/QEMU Linux Install guide for all android devices that I'm writing:
http://forum.xda-developers.com/showthread.php?t=2240397
Now have working Installers for ARM Java 7 JDK + Maptools + jMonkey
what the above poster saying is applicable to samsung phone... no yellow warning sign on sony phone.... what we call is flash mode.. power button+volume down.. but as ur xperia is older model it could be a power+back button... check whether ur phone is compatible with flash tool by Androxyde and Bin4ry... search and you need ur phones firmware as ftf format....
s-X-s said:
what the above poster saying is applicable to samsung phone... no yellow warning sign on sony phone.... what we call is flash mode.. power button+volume down.. but as ur xperia is older model it could be a power+back button... check whether ur phone is compatible with flash tool by Androxyde and Bin4ry... search and you need ur phones firmware as ftf format....
Click to expand...
Click to collapse
sad to say but it does not boot to recovery or anything,
it just shows the sony logo over and over again
i downloaded the flashtool, already in my pc
currently downloading the ftf files- i guess this is the "stock" build, or ROM
a while ago i tried it with the flashtool but
the flashtool says device disconected everytime the SONY logo disappears
is there any possibility that my phone will be back?
thank you
AND another thing!!
i installed the CWM with my BootLoader Locked
Next time post in your device section and if its a question in Q &A section...
http://forum.xda-developers.com/forumdisplay.php?f=1276
its appears to be a soft brick.... i havent seen/used Xperia Neo b4.. just looked @ pic.. i think 4 ur device it will be power +back button for flash mode and soft reset.... check ur device forum for more details... if i'm correct... press and hold power button +back button until u get one vibrate and let go.. then flash the ftf using flash tool.. usually ftf file are of stock firmware
s-X-s said:
Next time post in your device section and if its a question in Q &A section...
http://forum.xda-developers.com/forumdisplay.php?f=1276
its appears to be a soft brick.... i havent seen/used Xperia Neo b4.. just looked @ pic.. i think 4 ur device it will be power +back button for flash mode and soft reset.... check ur device forum for more details... if i'm correct... press and hold power button +back button until u get one vibrate and let go.. then flash the ftf using flash tool.. usually ftf file are of stock firmware
Click to expand...
Click to collapse
thank you, but sadly again it doesnt boot
i guess i lost my ROM and drivers
PC companion cant even detenct my device, even the flashtool too.
it just charging when i connect it to my PC
and has this battery image with a single blue bar, no animation whatsoever
do you recommend sending it to the SONY service centers??
i did this things only this time because the one year warranty already expired
thank you again, for your help
just a theory
i think my problem here is that, i lost my ROM together with the usb driver
because even flashtool cant detect/read it.
emperorrafael said:
just a theory
i think my problem here is that, i lost my ROM together with the usb driver
because even flashtool cant detect/read it.
Click to expand...
Click to collapse
Hi, Do not panic. I faced a similar problem today, and the best solution for it is using FLASHTOOL to flash the stock .ftf firmware.
From the sticky threads, download the stock ICS firmware for the phone. Also read up on how to use the flashtool.
Try and follow the solution given in the below thread, hit THANKS if it helps!
http://forum.xda-developers.com/showthread.php?t=2402421
ameyk85 said:
Hi, Do not panic. I faced a similar problem today, and the best solution for it is using FLASHTOOL to flash the stock .ftf firmware.
From the sticky threads, download the stock ICS firmware for the phone. Also read up on how to use the flashtool.
Try and follow the solution given in the below thread, hit THANKS if it helps!
http://forum.xda-developers.com/showthread.php?t=2402421
Click to expand...
Click to collapse
thank you for your guide, but i decided to go ahead and restore my phone completely using sony software updater
and i will root my phone again, and start from scratch
just a bit scared, but
lessons are learned when you commit mistakes, no?
thankyou again and
be safe
emperorrafael said:
Greetings!!!!
http://forum.xda-developers.com/showthread.php?t=2265805
i think i just ruined my phone
i made a huge mistake, i have mistakenly installed the zip file provided by the good man above on the link
the first instruction was to FLASH KERNEL PROVIDED FROM ZIP
and i INSTALLED it USING CWM
i guess FLASH and INSTALL does not mean the same thing. i am sorry, i am a newbie
please help me fix my phone
i am stuck at the SONY logo, it keeps flashing and flashing it
i connected it to my PC to attempt repair using PC Companion, my PC did not detect anything
I am trying to boot to recovery, but i do not know the keys to press
i searched for it but, nothing works for me
PLEASE HELP ME
PLEASE
I have a sony ericsson xperia neo v mt11i
i have successfully rooted it
i have also successfuly installed the Clockworkmod
Click to expand...
Click to collapse
i just want you all to know that my xperia neo v is now fixed
i used the SONY SOFTWARE UPDATER
it restored my phone to stock ICS4.0.5 and Build 4.1.B.597
i am very happy now that i revived my phnoe
TO ALL THE PEOPLE HERE THAT GAVE THEIR PRECIOUS TIMES JUST TO HELP ME,
I KNOW THAT I CAN ONLY THANK YOU FOR THIS.
BUT I AM REALLY GRATEFUL THAT THERE ARE STILL PERSONS AS GOOD AS YOU ALL ARE
i will dedicate my spare times reading forums,threads, learning how to PROPERLY install
custom ROMS
so that i can also help the others in need[superhero!!!]
THANK YOU ALL AGAIN
and BE SAFE