CyanogenMod is a free, community built distribution of Android 2.3.7 (Gingerbread) which greatly extends the capabilities of your phone.
This is a release candidate, but you should find it stable for everyday use.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github! If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance.
INSTRUCTIONS:
- First time flashing CM 7 to your phone (or coming from another ROM)?
1. Unlock/root your device and install Clockwork Recovery 3 via ROM Manager
2. Do a Nandroid backup!
3. WIPE
4. Install the ROM
5. Optionally install the Google Addon
- Upgrading from an earlier CM?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Thank you, Sir!
Quick question, I ran through the change log, has the call delay being resolved in this build?
I accidentally hit post when I was kanging your post. Sorry boss.
Yup,
Both call delay and the wonk were fixed
S_Dot said:
Thank you, Sir!
Quick question, I ran through the change log, has the call delay being resolved in this build?
Click to expand...
Click to collapse
Please use thanks button instead of creating new post just to thanks OP.
Where did 7.1 RC go?
Has it been pulled?
EDIT: Sorry was in the wrong cyanogen forum....
link: http://download.cyanogenmod.com/get/update-cm-7.1.0-RC1-N1-signed.zip
imfloflo said:
Please use thanks button instead of creating new post just to thanks OP.
Click to expand...
Click to collapse
button thanks dont show with me o.0
BTW: i have a problem with Skype app, when i try login, my phone force reboot 2 times then everything work fine... anyone have it??? :|
Can accommodate the 7.1 720p video?
YAY!! thanks!!
Rotation issue
I've upgraded from 7.0.3 to 7.1RC1 and am noticing an issue. Twice now (within 3 hours), I've had the rotation lock to landscape only. It rotates between top/down landscape but won't go into portrait mode (except in apps that are locked to Portrait like LauncherPro). A reboot fixes it but it's quite annoying.
I did not wipe when I upgraded (other than Dalvik cache). Has anyone else had this issue?
Waiting for so long,and finally...
Thank you cyanogen !
Upgrade from 7.0.3 without a full wipe,
and working just fine so far!
Anksta said:
I've upgraded from 7.0.3 to 7.1RC1 and am noticing an issue. Twice now (within 3 hours), I've had the rotation lock to landscape only. It rotates between top/down landscape but won't go into portrait mode (except in apps that are locked to Portrait like LauncherPro). A reboot fixes it but it's quite annoying.
I did not wipe when I upgraded (other than Dalvik cache). Has anyone else had this issue?
Click to expand...
Click to collapse
You should probably do a full wipe coming from 7.0.3 -> 7.1RC1
edit: actually, probably NOT http://twitter.com/#!/cyanogen/statuses/85214357763530753 "yes, you can upgrade from 7.0 (or a nightly build) without a wipe."
zok-star said:
YAY!! thanks!!
Click to expand...
Click to collapse
tonyeva said:
Waiting for so long,
and finally...
Thank you cyanogen !
Click to expand...
Click to collapse
The thread is 1 page long and a moderator asked you in big bold red letters not to do this. Stop.
Anksta said:
I've upgraded from 7.0.3 to 7.1RC1 and am noticing an issue. Twice now (within 3 hours), I've had the rotation lock to landscape only. It rotates between top/down landscape but won't go into portrait mode (except in apps that are locked to Portrait like LauncherPro). A reboot fixes it but it's quite annoying.
I did not wipe when I upgraded (other than Dalvik cache). Has anyone else had this issue?
Click to expand...
Click to collapse
Check the '0 Degree' box in prefs
i'm surprised to find that a tiny UI glitch exists all the way down to CM7 RC1...
http://code.google.com/p/cyanogenmo...on Model Network Owner Summary Stars Priority
Anyone confirms?
as always... cm is great........
but i guess the speaker volume is decreased from froyo cm 6.x
is that already in the bug list?
hi guys... I come from Cyano 7.0.3.. I did full wipe before flashing this Stable 7.1 but I'm experiencing a bug which I had also in Nightlies.. My wifi disconnects randomly and then connects again after awhile.. why? what should I do to fix this issue?
gnlcp said:
hi guys... I come from Cyano 7.0.3.. I did full wipe before flashing this Stable 7.1 but I'm experiencing a bug which I had also in Nightlies.. My wifi disconnects randomly and then connects again after awhile.. why? what should I do to fix this issue?
Click to expand...
Click to collapse
I remember some say setting Wi-Fi Sleep Policy to "Never" will make things better
You may try
(my memory may be wrong though )
momomok said:
I remember some say setting Wi-Fi Sleep Policy to "Never" will make things better
You may try
(my memory may be wrong though )
Click to expand...
Click to collapse
Thanks for your advice, but I've already set "Never".. No improvment
gnlcp said:
Thanks for your advice, but I've already set "Never".. No improvment
Click to expand...
Click to collapse
what radio version are you on?
haksam said:
what radio version are you on?
Click to expand...
Click to collapse
32.41.00.32u_5.08.00.04
Related
CyanogenMod is a free, community built distribution of Android 2.3 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* The CM team is not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting fired because the alarm app failed, or anything whatsoever.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github!
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance.
INSTRUCTIONS:
- First time flashing CM 7 (or coming from another ROM)?
1. Unlock/root your device - http://forum.xda-developers.com/showthread.php?t=754020
2. Do a Nandroid backup!
3. Update your radio if necessary (use the latest posted by ChiefzReloaded)
4. WIPE
5. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM7?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Only thing I've noticed with the last 3 builds, including RC1, is that the CPU locks onto the max set frequency, but it could be a result of my at least 30+ nowipe flashes of nightlies from build 1 to now if the issue remains after wiping and flashing I'll report it on the issue tracker.
Thank you, it has been amazing watching your team build the nightlys for this. The ability to modify CPU without an additional app should win this rom an award as far as I am concerned. Once again thank you for the years of work your team has put into these roms on all devices.
Regards,
AMAZING EVERYTHING IS WORKING INCLUDEING WIFI !!! Ty For all you work.
Sent from my T-Mobile myTouch 3G Slide using XDA App
hoping that this has the fix 19 had for wifi
Virus1x said:
hoping that this has the fix 19 had for wifi
Click to expand...
Click to collapse
It should be based off of the latest source, which would mean that it includes all previous bugfixes and additions/modifications from the nightly builds. It should be working smoothly, although I still have to test to see if the max frequency locking issue is still there or not. It was in build 40 of the nightlies, but I'm going to wipe and flash RC1 and see if it still happens.
Thank you ...Amazing Work.
MusicMan374 said:
Only thing I've noticed with the last 3 builds, including RC1, is that the CPU locks onto the max set frequency, but it could be a result of my at least 30+ nowipe flashes of nightlies from build 1 to now if the issue remains after wiping and flashing I'll report it on the issue tracker.
Click to expand...
Click to collapse
Yeah, the RC1 build has the fix. Unfortunately the new librpc didn't play nice with our hacks for the proprietary GPS on the Slide.
Is the boot.img already modified for darktremor a2sd? I'd like to use that. Thanks!
In on 1st page!
Good Job Cyanogen
Smartass Cyanogen Kernel haha
Only Cyanogen can code better than Chucknorris
Wait the stock cyanogen kernel has a smartass governor? Well then there was absolutely no point to me installing miguel's smartass kernel oh well. I'll flash system back over itself with the mtd boot patcher and call it good, after restoring titanium.
Glad to hear the CPU issues were resolved, I can confirm, no more issues I guess I didn't have to wipe after all, but it was probably about time to anyway haha. And holy damn my signature is out of date.
I'm heartbroken..
guess I'm stuck on Nightly 19.
Rc1 looked so slick..
Well guess that sucks..
All of us with the CM6 WIFI error had working wifi with Nightly build 19 and RC1 broke it again..
thank-god for a backup..
PLEASE Cyanogen Fix the WIFI error for CM7.. I don't have 3G I depend on WIFI
Virus1x said:
I'm heartbroken..
guess I'm stuck on Nightly 19.
Rc1 looked so slick..
Well guess that sucks..
All of us with the CM6 WIFI error had working wifi with Nightly build 19 and RC1 broke it again..
thank-god for a backup..
PLEASE Cyanogen Fix the WIFI error for CM7.. I don't have 3G I depend on WIFI
Click to expand...
Click to collapse
This should work on CM7: http://forum.xda-developers.com/showthread.php?t=896963
also, does the boot.img have a2sd enabled?
pettigrew95 said:
This should work on CM7: http://forum.xda-developers.com/showthread.php?t=896963
also, does the boot.img have a2sd enabled?
Click to expand...
Click to collapse
everyone claims it breaks it but I'l try..
Virus1x said:
everyone claims it breaks it but I'l try..
Click to expand...
Click to collapse
That wifi fix worked beatifully for me
boot loop
Are you guys getting a boot loop??
I wiped, installed the rom, than the google addon. It gets to the sign in page but when I press on the android it boots back up to the boot animation.
whoisloon said:
Are you guys getting a boot loop??
I wiped, installed the rom, than the google addon. It gets to the sign in page but when I press on the android it boots back up to the boot animation.
Click to expand...
Click to collapse
Did you do a full wipe?
pettigrew95 said:
Did you do a full wipe?
Click to expand...
Click to collapse
Yea, I did a full wipe, Wiped system, boot, cache, and etc
whoisloon said:
Yea, I did a full wipe, Wiped system, boot, cache, and etc
Click to expand...
Click to collapse
Hmmm, I'm not sure then, sorry man.
pettigrew95 said:
that wifi fix worked beatifully for me
Click to expand...
Click to collapse
on cm7 rc1?
XMIUI Play V2_B
Disclaimer
I AM NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE OR BRICK IT IN ANY WAY SHAPE OR FORM. I HAVE TESTED THESE UPDATES AND CONFIRM THEY WORK ON THE XPERIA PLAY R800I GSM MODEL. IF YOU HAVE ANY ISSUES OR QUESTIONS PLEASE POST AND WE CAN HELP YOU RECTIFY THEM!
What doesn't work?
Bluetooth - Doesnt Start
Hardware Buttons
Touchpads
Torch - Crashes when switching on. (Coming in next build!)
Screenshots - Doesn't capture! (Coming in next build!)
What works?
Boots successfully.
Hardware Accelleration
WiFi
Camera
Data
GSM Calls
Text Messages/MMS
VERY Fast and Smooth
Lockscreen
Themes, Music Player (very loud)
Market
Thanks to....
DoomLord - General kernel issues, help and support
Bin4ry - General help.etc
bheremans - Succesfully getting it to boot on the Ray, help and guidance! Wouldnt be possible without bheremans. Also porting it and fixing everything.
FreeXperiaTeam - Kernel sources!
How to Install
1. Extract this zip to a folder.
2. Copy the MIUIPlayV2_b.zip to your sdcard. (Via USB Storage)
3. Switch off your phone, and hold down search whilst plugging in the USB to enter fastboot mode. (Blue Power Light)
4. Open a command prompt/terminal and enter the following commands:
fastboot flash boot boot.img
fastboot boot recoveryPLAY.img
5. Format Data, Dalvik Cache and Factory Settings:
6. Install zip from SDCard, select MIUIPlayV2_b.zip.
7. Once that has completed, reboot your phone. (But keep connected to usb)
8. Once your phone has been installed you then need to open a terminal/command prompt (in the folder where you extracted the zip) and enter the following commands:
adb install softkeys.apk
9. Now unplug your phone, and slide across to the app Button Savior.
10. Then select "Kill/Start Button Savior Service". You should then see a little arrow at the side.
11. Press that little arrow.
12. There you have your hardware buttons for now. Press the x to hide them.
13. Enjoy your rom!
Download!
http://www.filesavr.com/853HS5A9BXUXZ8H
Screenshots
Coming Soon...
Finally MIUI!
Now all that is needed for me is to contact Alejadrissimo and get my fastboot enabled! :')
Well,congratualations on getting it to work!
However,it would be nice to have a small introduction to what is MIUI...i personally have no idea what it is ??_??
Cat_On_Droid said:
Well,congratualations on getting it to work!
However,it would be nice to have a small introduction to what is MIUI...i personally have no idea what it is ??_??
Click to expand...
Click to collapse
MIUI is a customized themed version of Android which is in the look of iOS.
Which version of MIUI is it?
DeanBoro said:
MIUI is a customized themed version of Android which is in the look of iOS.
Click to expand...
Click to collapse
I thought looking like iOS was one of the many possibilities, and not what MIUI was?
It is the latest version of MiUI (US Build but GSM only). I think it is 1.8.5
XperiaPlayer said:
It is the latest version of MiUI (US Build but GSM only). I think it is 1.8.5
Click to expand...
Click to collapse
newest MiUI is 1.10.x or something... atleast thats the one post in x10 section
Congratulations on making it work!
It seemed like you wouldn't get too much support but devs finally stepped up and helped make it happen. Good luck on improving it and vanish all those "what doesn't work" lines.
netorino said:
Congratulations on making it work!
It seemed like you wouldn't get too much support but devs finally stepped up and helped make it happen. Good luck on improving it and vanish all those "what doesn't work" lines.
Click to expand...
Click to collapse
After Camera and wifi works for me i cant wait to use it
congratulations in getting it to boot
we finally have a real alternative rom, no disrespect to the guys making striped/customized stock roms but i have been waiting for this since day one of purchasing my play, now if the sense rom can get ported too.......
all i need is for data to work and i will gladly flash this
Thanks to....
.....
* Me - For porting it! And sticking with it for a few days
Click to expand...
Click to collapse
Classic
I said that, regardless of how it came up, you deserved credit fit being gutsy and getting to work on it. Now that it appears to work (can't try it ATM) you deserve more credit for delivering. Kudos to you!
Current Progress:
Now onto fixing the WiFi, torch and screenshot capture. I dont know what data is but I also have no data with CM7 FXP41 either, this could be releated because we are using the same kernel (edited a bit) and ramdisk.
Coming in next build:
WiFi
Torch
Screenshot Capture
Custom Bootscreen
UK Version of MIUI (Not the US one, the uk one is more like the real miui and the one you see on most phones.)
Xperia Wallpapers
Data is 3g coverage. It's a deal breaker for many people, so once it's fixed you can safely say you have a stable miui running.
Yeh, I know what data is and this would be like one of the only things left to fix (Most stuff is regarding kernel changes with the code provided.etc). But i also have no APN's or data in CM7 either, so....
Good to hear
I'll just wait till it gets a bit more stable before trying it
Sent from my R800i using XDA Premium App
Any ideas on how are you going to fix the camera?Camera is very important u kno.
I don't know but they are working on it over in the Ray thread. It is something to do with the fact that because we cant get the source code for MIUI, we have to sort of hack the precompiled camera libary to link it with the kernel we have compiled...
Cat_On_Droid said:
Any ideas on how are you going to fix the camera?Camera is very important u kno.
Click to expand...
Click to collapse
oh boy... you should been on the X10 community...
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (Kit Kat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Working:
Assuming everything.
Not Working:
Data is wonky.
Installation Instructions
Coming From Stock:
Download latest CM10.1 Nightly from here, CM11 ROM and 4.4.2 GApps zips from below and copy to sdcard.
Reboot to recovery
Make a backup of current ROM setup and Data YOUR DATA WILL BE WIPED
Flash CM10.1 zip
Flash CM11 zip. Follow next step carefully
You will get a partition layout error. Flash CM11 zip again
Zip install will fail with set_metadata_recursive: some changes failed
Reboot recovery from advanced menu. Notice recovery version CWM-based Recovery 6.0.6.4
Wipe Data/Factory Reset
Flash CM11 zip one last time
Flash GApps
Reboot
Coming From CM10.1:
Download CM11 ROM and 4.4.2 GApps zips from below and copy to sdcard.
Reboot to recovery
Make a backup of current ROM setup and Data YOUR DATA WILL BE WIPED
Flash CM11 zip. Follow next step carefully
You will get a partition layout error. Flash CM11 zip again
Zip install will fail with set_metadata_recursive: some changes failed
Reboot recovery from advanced menu. Notice recovery version CWM-based Recovery 6.0.6.4
Wipe Data/Factory Reset
Flash CM11 zip one last time
Flash GApps
Reboot
ROM Download:
CyanogenMod 11.0 2/20/14
md5: e832432b4268255b63d5507c8a639e99
CyanogenMod 11.0 1/9/14
md5: 7c937708189ba0112d6882d724a3a695
CyanogenMod 11.0 1/4/14
md5: b7df574c383a58fac360f5dc962c69c
GApps:
PA 4.4.2 Modular Mini GApps
ROM take a bit to boot. Be patient.
Credit to:
CyanogenMod
TeamHacksung
jt1134
Disclaimer: I will more than likely not be supporting this very actively. Just posting this to get it out there.
Also, I have not tested installation with TWRP, nor do I have the desire to. I have only tested with the convoluted CWM debacle listed above.
Enjoy!
TWRP Install Instructions:
nm3210 said:
boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot.
Click to expand...
Click to collapse
Changelog:
repo sync'd upstream changes.
merged FascinateRIL class from https://github.com/TeamRegular/andr...mmit/6678964eac6a9443adc85ef34dad0c2e76f30d58
times_infinity said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (Kit Kat), which is designed to increase performance and reliability over stock Android for your device.
ROM take a bit to boot. Be patient.
Credit to:
CyanogenMod
TeamHacksung
jt1134
Disclaimer: I will more than likely not be supporting this very actively. Just posting this to get it out there.
Also, I have not tested installation with TWRP, nor do I have the desire to. I have only tested with the convoluted CWM debacle listed above.
Enjoy!
Click to expand...
Click to collapse
... WOW that has come out of nowhere!!! :victory:
Thank you Mr. Infinity
We haven't seen you really around here in ages,,, but VERY much appreciated!!!!
.
Uneventful update from CM11 12/06 with TWRP, everything works well even without formating my data! It did replace TWRP with CWM 6.0.4.6, but whatever. My successful steps were as follows: boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot. 3G/Wifi work. Have not tested MMS, but I assume it works like it did on previous CM11 builds.
Transparency is disabled by default now (for everyone who's curious) because in the build.prop the "ro.config.low_ram" option is set to "true". You can set it to false to get transparency (and anything else that gets flagged as low-ram) back.
nm3210 said:
Uneventful update from CM11 12/06 with TWRP, everything works well even without formating my data! It did replace TWRP with CWM 6.0.4.6, but whatever. My successful steps were as follows: boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot. 3G/Wifi work. Have not tested MMS, but I assume it works like it did on previous CM11 builds.
Transparency is disabled by default now (for everyone who's curious) because in the build.prop the "ro.config.low_ram" option is set to "true". You can set it to false to get transparency (and anything else that gets flagged as low-ram) back.
Click to expand...
Click to collapse
Can't wait to play with this! This may actually make me update to kitkat on my fascinate! Thank you sir!
whoa I haven't seen you in a long time. welcome back and whoa cm11.
you thinking of making these official?
Sent from my SCH-I500 using xda app-developers app
Unfortunately data is borked and cycles on and off. I first dirty flashed and then did a complete wipe and no difference.
kb8no said:
Unfortunately data is borked and cycles on and off. I first dirty flashed and then did a complete wipe and no difference.
Click to expand...
Click to collapse
Yeah a day later I agree. You can quick toggle it to get it to work for a few minutes but it's not very consistent. Also, maybe it's the new WhisperPush or something, but I couldn't send or receive MMS at all. When receiving MMS, I would get a notification (both my SMS Popup and an actual notification) but there was no message in MMS.apk and it definitely never downloaded anything.
hi
whats the difference between this one and the the 12/06 cm 11.0 ? anyone know cause i coudnt get it to load i bricked twice.....thanks foor your hard work though nice...
hutchjim said:
whats the difference between this one and the the 12/06 cm 11.0 ? anyone know cause i coudnt get it to load i bricked twice.....thanks foor your hard work though nice...
Click to expand...
Click to collapse
This one is a smoother and if data was fixed I think it would be great. Data drops drove me off this in hours. No problems flashing. Maybe you got a bad download.
12/6 was rougher and data drop plagued as well so not a DD.
12/6 was all good for me. I used it for almost a month without a hitch. Data worked fine too for me. Just the urge of flashing something new took over and I tried DU5 but was put off by random reboots. So switched to cm 11 1/04. Happy with it till date. Off course data is flaky but will live with it until it's rectified.
Sent from my SCH-I500 using Tapatalk
new build is up guys.
hopefully it fixes data.
Enjoy!
Running this latest build without any tweaks since yesterday. Data is stable and so is the ROM. Great work. Thanks. :thumbup::thumbup::beer:
Sent from my SCH-I500 using Tapatalk
great work!
lots of updates going through for the device on BBQlog so still curious why the Fascinate isn't officially being updated anymore?
trajik78 said:
great work!
lots of updates going through for the device on BBQlog so still curious why the Fascinate isn't officially being updated anymore?
Click to expand...
Click to collapse
jt1134, the official CM maintainer for the fascinate and a couple other devices (OG Tab 7 CDMA i think), has either retired the fascinate or isn't on TeamDouche anymore.
the performance setting and ART not stick ~
A-L31 said:
the performance setting and ART not stick ~
Click to expand...
Click to collapse
You might try chainfires supersu
perf settings seem buggy though. even on du
Don't know in art..
hhp_211 said:
You might try chainfires supersu
perf settings seem buggy though. even on du
Don't know in art..
Click to expand...
Click to collapse
sorry, i just found out. i use xposed frameworks. after uninstall it everything i described above is false.
ART Working (takes time to boot, i almost inpatient i think i'm on bootloop :victory: )
Performance Stick at boot ~ :silly:
A-L31 said:
sorry, i just found out. i use xposed frameworks. after uninstall it everything i described above is false.
ART Working (takes time to boot, i almost inpatient i think i'm on bootloop :victory: )
Performance Stick at boot ~ :silly:
Click to expand...
Click to collapse
Good to know, thanks for the update
i can't install app to sd card.
when i restore with TiBu it stuck. when i'm download from app store it says Couldn't install on USB storage or SD Card.
is it something to do with ART or the ROM?
what i'm trying to install / restore is whatsapp wallpaper. it goes automatically to SD
anyone?
Intro:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
About CyanogenMod:
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Screenshots:
Source Code:
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Notable Features:
CyanogenMod 12 also includes some quite interesting features for those who want full control of Android.
Theme Engine
UI Mods
Performance Options
OTA Updates via Settings
Built-in root access via Development Options
Download Links:
Nightly Builds: http://download.cyanogenmod.org/?device=z3
PA GAPPS Package: Click here!
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Please note that I am not an official maintainer for the Z3. If there are any issues, mods or whoever responsible remove this thread.
XDA:DevDB Information
Official CyanogenMod 12.1 Nightlies Z3, ROM for the Sony Xperia Z3
Contributors
squabbi
Source Code: http://www.github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-22
Last Updated 2015-04-27
What's Working?
If you would like a more 'working' build, thanks to @Untouchab1e Right here. This includes fixes for numerous things!
Here is a list of items that are confirmed working and/or not working:
Working:
Screen
Camera
Microphone
RIL (Radio Interface Layer)
Speakers
NFC
Bluetooth
Video playback (Stock apps + Youtube playback)
Not Working:
Double-tap to wake (Try using another kernel)
Unconfirmed:
N/A
Other Issues:
Brightness fix is Here! Thanks @jdenman03
Camera video recording volume is very low.
4 Second delay on calls
Home button doesn't work me. Flashed PA Mini App Pack.
xnerdx said:
Home button doesn't work me. Flashed PA Mini App Pack.
Click to expand...
Click to collapse
This seems to be a moderate issue as well, have you tried wiping the system partition, completing a factory reset and then flashing the nightly and gapps.
I can't seem to figure out as to why this refuses to work for me.
After going to updater-script and changing z3 to leo (I use the CWM recovery), it begins the installation and then just gets stuck on it.
Same thing applies if I try to use anything beyond cm-12-20150120-UNOFFICIAL-z3 by David_Vaz while that particular version works fine; a few seconds and the installation completes.
Any ideas?
raptorjesus1337 said:
I can't seem to figure out as to why this refuses to work for me.
After going to updater-script and changing z3 to leo (I use the CWM recovery), it begins the installation and then just gets stuck on it.
Same thing applies if I try to use anything beyond cm-12-20150120-UNOFFICIAL-z3 by David_Vaz while that particular version works fine; a few seconds and the installation completes.
Any ideas?
Click to expand...
Click to collapse
Strange... It could be the recovery. Change back the recovery script to its default (z3) and give it a go in TWRP which worked for me. Both David_Vas and the official nighties of CM12.
I've been out of the 'loop' for a while and have no idea how to revert to stock recovery. Any tips?
raptorjesus1337 said:
I've been out of the 'loop' for a while and have no idea how to revert to stock recovery. Any tips?
Click to expand...
Click to collapse
You mean the stock sony recovery? Or just any recovery?
Oddily enough, I'm suffering with the same problem... Mine show "This package is for device: D6602, D6603, D6633, D6643, z3; this device is leo" .
It happens both with CWM and TWRP.
I'm clueless about what to do...
BTW, my device is D6633.
Warm welcome to the CM team. So happy to see you here.
I have a bug to report, if I may.
Methodology:
Make a call (I'm currently using the Google dialler, featured in PA Gapps).
During the call, while the screen is off, I attempt to turn the screen on, to end the call.
The screen won't turn on, however many times I click the power button, or try to communicate with the phone's gyroscope.
I end up having to hard reset the phone, to get it to reboot, otherwise the call cannot be ended, with the screen off.
Many thanks for your graciousness and hard work. I look forward to all further updates.
Regards.
radjan said:
Oddily enough, I'm suffering with the same problem... Mine show "This package is for device: D6602, D6603, D6633, D6643, z3; this device is leo" .
It happens both with CWM and TWRP.
I'm clueless about what to do...
BTW, my device is D6633.
Click to expand...
Click to collapse
All you need to do is edit the updater-script and change the device model it searches for. Instead of 'z3' replace it with 'leo'.
edit: It's something like this: But you should be seeing 'z3' instead of 'ST15i' change that to 'leo'. and you should be on your way!
now what is the updater-script and update-binary present in the META-INF>com>google>android in any flashable zip package?
1. updater-script - it is just a text file which contains all the commands which tells the clockworkmod what to do with the given
zip file. the updater-script is written in the edify scripting language.
2. update-binary - it is a binary which is requiered by the clockworkmod to translate the human readable format of the updater-
script to machine readable format for execution of the updater-script in our device.
exploring the updater-script:
now let's start exploring the updater-script !
1. open the updater script with notepad++ (strongly recommended)
2. now i will try and explain commands generally used in the updater-script,
assert(getprop("ro.product.device") == "ST15i" || getprop("ro.build.product") == "ST15i" ||
getprop("ro.product.device") == "ST15a" || getprop("ro.build.product") == "ST15a" ||
getprop("ro.product.device") == "smultron" || getprop("ro.build.product") == "smultron");
the above bunch of lines checks the device model to confirm that the zip file is flashed on the device
for which it is specifically created for. These bunch of lines are very important because it prevents
flashing of zip file which is not intended for the device hence avoiding any problems due to flashing
the wrong zip. for example the above lines checks for the value of "ro.product.device" and
"ro.build.product"in the build.prop file of the already existing rom in the device, if any of the three
defined values ST15i, ST15a, smultron are found it will continue with the next line of updater-script
otherwise flashing gets aborted with error in getprop.
Click to expand...
Click to collapse
Yeah, i found a link right after I posted. Sorry for bothering, and thanks anyway!
hospital349 said:
Warm welcome to the CM team. So happy to see you here.
I have a bug to report, if I may.
Methodology:
Make a call (I'm currently using the Google dialler, featured in PA Gapps).
During the call, while the screen is off, I attempt to turn the screen on, to end the call.
The screen won't turn on, however many times I click the power button, or try to communicate with the phone's gyroscope.
I end up having to hard reset the phone, to get it to reboot, otherwise the call cannot be ended, with the screen off.
Many thanks for your graciousness and hard work. I look forward to all further updates.
Regards.
Click to expand...
Click to collapse
Hi! Thanks!
Do you think there is something wrong with the proximity sensor? On mine it works perfectly, although I don't call enough to see if I can replicate it. I had a phone call just then and it went OK. The screen would turn back on.
radjan said:
Yeah, i found a link right after I posted. Sorry for bothering, and thanks anyway!
Click to expand...
Click to collapse
Don't sweat it! Enjoy your day with CM12!
squabbi said:
Hi! Thanks!
Do you think there is something wrong with the proximity sensor? On mine it works perfectly, although I don't call enough to see if I can replicate it. I had a phone call just then and it went OK. The screen would turn back on.
Click to expand...
Click to collapse
I'm not quite sure. I was using stock, previous to using CM12 and I always had to double tap the power button to activate the screen, during a call.
Does CM12 require a Z3 user to fo the same, or should it be automatic, as the user lowers the phone away from his/her ear?
I'm slightly worried that this is a hardware issue, on my side. That would be just my luck. Rubbish!
Thanks for your help.
hospital349 said:
I'm not quite sure. I was using stock, previous to using CM12 and I always had to double tap the power button to activate the screen, during a call.
Does CM12 require a Z3 user to fo the same, or should it be automatic, as the user lowers the phone away from his/her ear?
I'm slightly worried that this is a hardware issue, on my side. That would be just my luck. Rubbish!
Thanks for your help.
Click to expand...
Click to collapse
It could be a hardware issue if it happens on stock as well. Usually it is automatic when the user moves their phone away from their face. All other mobiles should do the same so I'm not sure why its not for you. Is there anything within the dialer settings or system settings that may have been changed?
squabbi said:
It could be a hardware issue if it happens on stock as well. Usually it is automatic when the user moves their phone away from their face. All other mobiles should do the same so I'm not sure why its not for you. Is there anything within the dialer settings or system settings that may have been changed?
Click to expand...
Click to collapse
I thought that as well and checked a little while ago. Nothing that I can see. Maybe it is the proximity sensor. Is there a way I can test my devices proximity functionality/calibration, or even recalibrate if necessary?
I really want to troubleshoot it and make sure that it's definitely a hardware issue, rather than a ROM/kernel problem.
hospital349 said:
I thought that as well and checked a little while ago. Nothing that I can see. Maybe it is the proximity sensor. Is there a way I can test my devices proximity functionality/calibration, or even recalibrate if necessary?
I really want to troubleshoot it and make sure that it's definitely a hardware issue, rather than a ROM/kernel problem.
Click to expand...
Click to collapse
Oh definately. I'm not too sure on the matter but I remember that on the Sony stock ROMs it had a service menu to test things out. There might be similar apps on the Play Store, but try this one out. I can't remember if it included the proximity check for it but it could test pressure (water tightness).
https://play.google.com/store/apps/details?id=com.cpuid.cpu_z
Ok, tried the ROM, it's awesome as I expected. But it has the same problem as David's one: the RIL doesn't seem to work for the dual sim version.
I know it's not a priority for you guys developing it, but could you let us know on the topic if something is done towards making it work for us with the D6633?
Once again, sorry for bothering. Don't want to come here asking for deadlines or anything. It's just that once you taste the lollipop, there's no going back. I'll miss it sorely for now.
squabbi said:
Oh definately. I'm not too sure on the matter but I remember that on the Sony stock ROMs it had a service menu to test things out. There might be similar apps on the Play Store, but try this one out. I can't remember if it included the proximity check for it but it could test pressure (water tightness).
https://play.google.com/store/apps/details?id=com.cpuid.cpu_z
Click to expand...
Click to collapse
An impressive app, if you ask me. It does look as if the proximity scales are moving, but that doesn't mean anything if the phone isn't registering my actions. I checked and service mode followed by calibration of proximity sensors, might fix it (according to some forums). I'm away from my PC and will have to revert to stock, to try this out.
So sorry if I at all hijacked the thread, for a while. I honestly thought that the issue may have been caused by a bug, at first.
Thanks for your insight and kindness.
Look forward to future iterations of CM12.
Regards.
#include <std_disclaimer.h>
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Download: Link
- Works
Everything so far
- Doesn't work
You tell me
Source: https://github.com/Galaxya50
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery (has to be a custom recovery. TWRP, OrageFox, etc.)
Make a backup of ur data (Not Necessary)
Wipe Cache, Dalvik, System, Data (wiping internal storage is not necesary)
Flash the latest build
Flash Gapps
Reboot
DIRTY FLASH (may cause bugs. not recommended):
Download the latest build
Reboot to recovery
Flash the latest build
Flash Gapps
Wipe Cache
Reboot
Builder: Me
Awesome work !
Keep it up
Battery saving is amazing
rezabahramnezhad said:
Battery saving is amazing
Click to expand...
Click to collapse
Please add fod animations
rezabahramnezhad said:
Please add fod animations
Click to expand...
Click to collapse
will try if i have time
which gapps can i use on this rom? flamegapps and mindthegapps didnt work
TedFin said:
which gapps can i use on this rom? flamegapps and mindthegapps didnt work
Click to expand...
Click to collapse
try nikgapps
Scorpionkm469 said:
try nikgapps
Click to expand...
Click to collapse
it worked, thanks!
Scorpionkm469 said:
Download: Link
- Works
Everything so far
- Doesn't work
You tell me
Source: https://github.com/Galaxya50
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery (has to be a custom recovery. TWRP, OrageFox, etc.)
Make a backup of ur data (Not Necessary)
Wipe Cache, Dalvik, System, Data (wiping internal storage is not necesary)
Flash the latest build
Flash Gapps
Reboot
DIRTY FLASH (may cause bugs. not recommended):
Download the latest build
Reboot to recovery
Flash the latest build
Flash Gapps
Wipe Cache
Reboot
Builder: Me
Click to expand...
Click to collapse
Can I flash it on my Samsung A505f device?
Shuvops said:
Can I flash it on my Samsung A505f device?
Click to expand...
Click to collapse
yes
Please help. My a50 is bugging out every time I turn it on the screen just dims and dims until the screen is just off. The touch screen works because I can turn on the flashlight etc but I can't see anything on the screen, I'm using crdroid 8.9
It's happened twice already. If I let it go on stand by with NO activity for a few hours it will then start working again and that's a pretty big inconvenience when it stops working
This hasn't happened any other time with other ROMs than crdroid
And I really dont wanna switch ROMs either before I get my other phone fixed because this is a rom I like
This always happens when I restart the phone. Not always when I restart it but sometimes
Like now when I let it stay off the night not on the charger in the morning (now) it started working again
TedFin said:
Please help. My a50 is bugging out every time I turn it on the screen just dims and dims until the screen is just off. The touch screen works because I can turn on the flashlight etc but I can't see anything on the screen, I'm using crdroid 8.9
It's happened twice already. If I let it go on stand by with NO activity for a few hours it will then start working again and that's a pretty big inconvenience when it stops working
This hasn't happened any other time with other ROMs than crdroid
And I really dont wanna switch ROMs either before I get my other phone fixed because this is a rom I like
This always happens when I restart the phone. Not always when I restart it but sometimes
Like now when I let it stay off the night not on the charger in the morning (now) it started working again
Click to expand...
Click to collapse
huh, thats strange, might be hardware but im not 100% sure since u said its not happening on other roms. i havent had any issues with crd in these few weeks that ive been using it. can you try LOS19.1 that i built and see if it happens with it as well? u can comment on that post if it does
Hi.
This is a great rom, all features that I want from pixel and battery nearly identical to stock.
I think this is known issue, but Bluetooth audio,as in calls via headset,are NOT working. I went into telegram groups but couldn't find any working solution,I already tried to disable wifi but still not working. Could you please offer any advice or at least put it in known bugs?
Thanks.
keymanjg said:
Hi.
This is a great rom, all features that I want from pixel and battery nearly identical to stock.
I think this is known issue, but Bluetooth audio,as in calls via headset,are NOT working. I went into telegram groups but couldn't find any working solution,I already tried to disable wifi but still not working. Could you please offer any advice or at least put it in known bugs?
Thanks.
Click to expand...
Click to collapse
cant say, i didnt try bluetooth but ik its not working on some roms. dunno a fix to it, ill ask around and try to find a fix for bt calls not working. thx for pointing it out
Do I have to install Android 12 stock firmware on A505f before installing this?
If so then where can I find it?
cir.s72 said:
Do I have to install Android 12 stock firmware on A505f before installing this?
If so then where can I find it?
Click to expand...
Click to collapse
there isnt stock firmware a12 for a505. and no, u can just flash it as usual
Works great thanks
just a reminder that crdroid version 8.10 is available
crDroid.net - crDroid 8.10 released and crDroid 9 updates
October 2022 security patches merged and crDroid 9 development progress
crdroid.net
I have a wifi problem. When I try to connect to my private wifi it instantly just turns off wifi. Mobile Data works without problems. I dont know if I did anything wrong, I also did the advanced wipe in orangefox recovery(which comes with magisk). Then I installed the rom and nikgapps core + androidauto addon (nikgapps-SL android12.1). And then rebooted to recovery -> and rom started successfully.
I always used the stock rom with root so I cant really tell whats the issue here.
Model: SM-A505FN
Also thanks for your effort to make this rom work
EDIT: I did the same steps but this time I booted to system instead of recovery and it worked.
RequestFX said:
I have a wifi problem. When I try to connect to my private wifi it instantly just turns off wifi. Mobile Data works without problems. I dont know if I did anything wrong, I also did the advanced wipe in orangefox recovery(which comes with magisk). Then I installed the rom and nikgapps core + androidauto addon (nikgapps-SL android12.1). And then rebooted to recovery -> and rom started successfully.
I always used the stock rom with root so I cant really tell whats the issue here.
Model: SM-A505FN
Also thanks for your effort to make this rom work
EDIT: I did the same steps but this time I booted to system instead of recovery and it worked.
Click to expand...
Click to collapse
i experienced some wifi issues as well, dont know whats causing it but usually a reboot fixes it