Hi guys,
i need a 3 part firmware for GT-I9300 because i have a problem with my phone.
Plz help me. :crying:
Thanks
ValoX
What kind problem?
Sent from my GT-I9300 using Tapatalk 2
Spontaneous reboots. And other. My firmware was corrupted when I installed the CM9. I tried the reset and wipe. But with no result. I tried also with more flash of the stock firmware.
Sorry for my bad English.
3 part firmware is found at sammobile.com
jje
Please give me the link. I didn't found it.
Please help me! :crying:
ValoXis said:
Please help me! :crying:
Click to expand...
Click to collapse
Here is the downloadlink for a unbranded Italian rom http://www.hotfile.com/dl/160760211/17a8084/I9300XXALF6_I9300ITVALF1_ITV.zip.html.
Extract it once (from .rar to .tar), password sammobile.com and flash it with Odin v 3.04.
Its 1 file and put it in PDA, boot in downloadmode and flash it.
Unfortunately this is not necessary. To solve my problem it requires the firmware in 3 parts.
why 3 parts, 1 part will do!
Verstuurd van mijn GT-I9300 met Tapatalk
I need to do the deep clean 2.
The problem is the same: http://forum.xda-developers.com/showthread.php?t=1721559
How to solve it?
I had a similar issue when flashing something with Mobile Odin went wonky. I was able to get into download mode and flash a stock firmware via full Odin but after that I was stuck at the splash screen. I solved the problem by booting into Samsung recovery (vol up + home + Power) and performed a factory reset there. I was then able to boot into the OS and start from scratch.
Follow his method use one file
Sent from my GT-I9300 using Tapatalk 2
With one file firmware the problem remains. It need 3 parts firmware (CODE, MODEM, CSC)
go ask here http://forum.xda-developers.com/showthread.php?t=1671969
browse 1st
ValoXis said:
With one file firmware the problem remains. It need 3 parts firmware (CODE, MODEM, CSC)
Click to expand...
Click to collapse
Why ??? one part firmware includes those three .
But as said 3 part firmware = sammobile .
jje
apisfires said:
go ask here http://forum.xda-developers.com/showthread.php?t=1671969
browse 1st
Click to expand...
Click to collapse
Thanks. But this don't solve my problem.
JJEgan said:
Why ??? one part firmware includes those three .
But as said 3 part firmware = sammobile .
jje
Click to expand...
Click to collapse
I didn't found it! If you have it please give me the link.
Just flash the corresponding firmware from SamFirmware.com
When finished, boot to the stock recovery and factory-reset the phone
If it still does not work, resume complaining about needing a 3-part firmware
Howver the firmwares on SamFirmware have the 3 files bundled in one flash-file, so just do it...
d4fseeker said:
Just flash the corresponding firmware from SamFirmware.com
When finished, boot to the stock recovery and factory-reset the phone
If it still does not work, resume complaining about needing a 3-part firmware
Howver the firmwares on SamFirmware have the 3 files bundled in one flash-file, so just do it...
Click to expand...
Click to collapse
If I use a SamMobile firmware, that firmware is all-in-one?
ValoXis said:
Thanks. But this don't solve my problem.
I didn't found it! If you have it please give me the link.
Click to expand...
Click to collapse
If you cannot find what you require then it may be worth asking on sammobile forum for what you require .
Only 3 part firmware i have ever seen is on sammobile although that was SGS1 and 2 models in the past presumed that sammobile supplied 3 part for SGS3 might be wrong as you are the only one ever mentioned 3 part firmware .
jje
You could've just flashed the corresponding firmware from samfirmware and followed through on the description to check if it works.
I'm sure there are people who could convert the 1-file firmware to a 3-file firmware for you but what would be the point given that the one file holds everything you need?
Related
Hello,
im new here. Im from Germany and i bought my s2 from amazon.co.uk in may. I think its the GT-I9100LKAXEU, but im not sure.
I need a old 3-parts firmware, with which i can use the pit file and then update it then with kies.
The reason is that my headphone-socket is a bit damaged and i want to give it for warranty
excuse me for my not so perfect english
Thanks a lot
here for unbranded http://forum.xda-developers.com/showthread.php?t=1075278
and here for branded http://forum.xda-developers.com/showthread.php?t=1113928
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
sk91s2 said:
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
Click to expand...
Click to collapse
Why do you want to use a PIT file .
Rule is do not use PIT only for experienced users .
Three part firmware is on samfirmware .
For warranty flash stock firmware from link given if rooted or custom rom reset rom counter with USB jig is the method used .
jje
sk91s2 said:
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
Click to expand...
Click to collapse
No, you don't.
JJEgan said:
Why do you want to use a PIT file .
Rule is do not use PIT only for experienced users .
Three part firmware is on samfirmware .
For warranty flash stock firmware from link given if rooted or custom rom reset rom counter with USB jig is the method used .
jje
Click to expand...
Click to collapse
^^ this
mariosraptor said:
here for unbranded http://forum.xda-developers.com/showthread.php?t=1075278
and here for branded http://forum.xda-developers.com/showthread.php?t=1113928
Click to expand...
Click to collapse
These are official.
do u know what is ur CSC ?
I think its also fine if you simply flash a stock firmware via recovery and then flash a stock kernel through odin. no need for anything else afaik
cyanoviper said:
I think its also fine if you simply flash a stock firmware via recovery and then flash a stock kernel through odin. no need for anything else afaik
Click to expand...
Click to collapse
How can he flash stock via recovery ???????????????
jje
JJEgan said:
How can he flash stock via recovery ???????????????
jje
Click to expand...
Click to collapse
He can use mobile odin as long as he is rooted.
Sent from my GT-I9100 using xda premium
You don't need a "3 part" FW, there is no need for all "parts" being seperate.
The ROMs in Intratech's thread contain everything needed, you can say "all 3 parts are packed into the one file".
Just flash a matching one of those.
my phone recently deleted everything on it, such as kernal and so on. looking around i managed to get my phone to work again, but the stock software i am using is Korean, does any one know how to download a UK stock version of everything, that preferably is unlocked, or vodaphone, as i have been looking for ages, and cant find any, thanks
XXKL1 2.3.6 Open Europe
passsword:samfirmware.com
http://hotfile.com/dl/146321681/7a0247f/I9100XXKL1_I9100OXAKL1_OXA.zip.html
BUKJ3 2.3.5 U.K Vodafone
No password or samfirmware.com maybe samsung-firmwares.com
http://hotfile.com/dl/145833620/ac6907a/I9100BUKJ3_I9100VODKI2_VOD.zip.html
cooza;
BUKJ3 2.3.5 U.K Vodafone[/QUOTE said:
How do you install this one, do you use odin , and if so which part ?
Click to expand...
Click to collapse
Josshhiieeee said:
How do you install this one, do you use odin , and if so which part ?
Click to expand...
Click to collapse
follow instruction in this thread for flashing using odin and you should also find official uk firmware in one of the other posts in this thread.
http://forum.xda-developers.com/showthread.php?t=1075278
Josshhiieeee said:
How do you install this one, do you use odin , and if so which part ?
Click to expand...
Click to collapse
Sorry mate,bit busy.
Unzip file.No password needed.You will see a file that ends in tar.md5.Put this file in PDA in Odin and select START without selecting anything else.When flash is finished do a factory reset.
Done.
Hi guys,
My friend's got a problem. He installed resurrection remix v 1.9.1 by westcrip 4.0.4 on his s2.
The kernel is:
3.0.31-siyah-v.3.2.4+
[email protected] #32
SMP PREEMPT Thu May 17 17:46:03
EEST 2012
He didn't do a backup before installing it and now he wants the original rom back. Could anyone here tell me exactly what he has to do?
He doesn't know anything about flashing roms etc and he did it as in the tutorial to get resurrection remix, so we need an easy tutorial (I don't own a s2 so I can't help him much).
His S2 has no branding.
Thx and please help!
Michi
Michi_optimus_me said:
He didn't do a backup before installing it and now he wants the original rom back.
Click to expand...
Click to collapse
Only your friend can know what firmware was on his phone before flashing the custom ROM. I suggest to use CheckFus to get the latest official firmware for the phone and then flash it using ODIN.
Michi_optimus_me said:
He doesn't know anything about flashing roms etc and he did it as in the tutorial to get resurrection remix, so we need an easy tutorial (I don't own a s2 so I can't help him much).
Click to expand...
Click to collapse
Using CheckFus is self-explanatory and for using ODIN there are already many excellent and easy to read guides here.
So CheckFus will tell which firmware is right for his device? It will tell exactly which firmware?
And could you post a link to a thread, where is explained how to flash the firmware using odin. Cause I don't understand anything about basebandkernel, and we don't know which firmware was there as he bought the device and which kernel and which baseband and whatever. Is there any tutorial for noobs?
Could you excatly post which firmware we need from here to get phone back on stock ics? We want a german firmware if possible. (I know you could just say ask google, but at xda heres a great community and I don't understand anything of odin and want to know which files exactly I have to download for phone, pda and cdc. That would be so great!)
Please help us!
Thx in advance!
Michi
EDIT:: I found this here: http://androidfirmwares.net/PhoneFirmware/Download/120
Can I download there and then I have to put them like this:
PDA: XWLPF
PHONE (Modem): XXLPX
CSC: OXILP6
?
And then get s2 to download mode?
And what about the kernel? There is this kernel on s2 right now:
3.0.31-siyah-v.3.2.4+
[email protected] #32
SMP PREEMPT Thu May 17 17:46:03
EEST 2012
How can I flash stock kernel? Or is it included in these PDA,PHONE,CSC Files?
Michi_optimus_me said:
So CheckFus will tell which firmware is right for his device? It will tell exactly which firmware?
Click to expand...
Click to collapse
Yes
Michi_optimus_me said:
And could you post a link to a thread, where is explained how to flash the firmware using odin. Cause I don't understand anything about basebandkernel, and we don't know which firmware was there as he bought the device and which kernel and which baseband and whatever. Is there any tutorial for noobs?
Click to expand...
Click to collapse
You will have to do quite a lot of reading. Start by reading the Stickies and then read this thread which explains how to use ODIN.
Remember: only fools rush in - take your time and read before flashing
Thanks a lot, but what about kernel now? We'll have to read the thread, but I just want to know if the firmware from android firmware was right and if I could flash the rom if I just put these 3 Phon,Pda and Csc in the fields and without repartition. So what about the kernel?
Sorry if I nerve you, but I'm a noob with s2/flashing etc and it's not my phone
Thx!
Michi_optimus_me said:
So what about the kernel?
Click to expand...
Click to collapse
The kernel is part of the stock firmware.
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Michi_optimus_me said:
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
You can try www.sammobile.com for stock firmware too. You'll have to sign up, but it's worth it. You just search for the stock firmware for your device and flash through Odin. Do not use the repartition button or the pit file and you should be fine.
Sent from my GT-I9100 using xda premium
Michi_optimus_me said:
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
I doubt that, the 7z file contains one tar.md5 file. Do not untar it, no one said you should do so. For ODIN read and follow the instructions according to the link I posted in post #4. That thread tells you what to do with the firmware file.
Michi_optimus_me said:
So we just need to place these 3 files in the right order in odin (PDA: XWLPF, PHONE (Modem): XXLPX, CSC: OXILP6) and go in download mode on galaxy s2. Then we can flash the firmware which is stock? And then we can update via kies if possible and use kies and etc? there's nothing else to do? And after the we have warranty as if we have just bought it?
EDIT:: I downloaded it but in the 7z file there were only boot modem cache etc and these were iso files? What have I got to do? Where can I download just pda, phone and csc? I dont get that!
Pls help!
Click to expand...
Click to collapse
extract the file u downloaded from samfirmware or checkfus
u will have two files in it (in Latest gb or ics)
insert it in pda and flash
and ur done
the kernel is included in the firmware ..
Thx guys now I hope this is my last question on this topic:
I read the guide and downloaded a firmware. Now I don't understand the thing with checkfus. Do I really need checkfus or can I just download this firmware for a s2, unbranded, bought on amazon and it's a german s2?
Can I only put this extracted .tar.md5 file in PDA Section in Odin, boot s2 into download mode and connect to pc. Then click start and everything should went fine?
I own a xperia mini pro and there I must flash kernel and then firmware, so at odin and s2 the kernel will be changed when I flash pda and is included in pda?
Sorry, I asked same before, but I don't really understood
Thx for your great answeres, xda is a super community!
Michi_optimus_me said:
Thx guys now I hope this is my last question on this topic:
I read the guide and downloaded a firmware. Now I don't understand the thing with checkfus. Do I really need checkfus or can I just download this firmware for a s2, unbranded, bought on amazon and it's a german s2?
Click to expand...
Click to collapse
CheckFus is used to download the latest firmware. As you have downloaded the firmware from somewhere else, you do not need CheckFus anymore.
Michi_optimus_me said:
Can I only put this extracted .tar.md5 file in PDA Section in Odin, boot s2 into download mode and connect to pc. Then click start and everything should went fine?
Click to expand...
Click to collapse
Yes, exactly, load the tar.md5 file.
Michi_optimus_me said:
I own a xperia mini pro and there I must flash kernel and then firmware, so at odin and s2 the kernel will be changed when I flash pda and is included in pda?
Click to expand...
Click to collapse
Yes, correct, as stated earlier.
Michi_optimus_me said:
Sorry, I asked same before, but I don't really understood
Click to expand...
Click to collapse
No problem, better ask if unsure.I can see, you did some reading
Flash stock rom after resurrection remix
I just reflashed my samsung J-500H with the stock rom after gapps started crashing on resurrection remix. I had no problems going back to stock except the I had a boot loop for a few times my remedy was to do a data and factory reset on stock recovery. I will reflash RR after I find gapps that would work on my J5 Lollipop. Any suggestions?
Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood+waVEXcxGbW4T1iWMkicox0=
http://d-h.st/AZN
It's only one rom with all working files i found in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Q and A
1.Did I can flash any GB ROM using one file rom and the added PIT File ?
A:No , you can't . First you need reflash your phone using russian 3 file rom , after this you can do everything you want .
2. It's working ?
If you know what is Odin , how to flash and doing everything like in this how to , for sure this is working .
It contains CSPA, EFS, UMS.
What for ?
Is full GB firmware applicable?
Dr01nE said:
Is full GB firmware applicable?
Click to expand...
Click to collapse
It's for sure working . Because this rescue , me after JB flash . If you will install first this Russia ROM then you can flash Rom for your localization without problems
Using the above linked PIT together with a firmware for Europe (so starting with XX...; exactly the XXLL2) didn't bring me back to GB. Flashing worked fine, but afterwards the device had a bootloop (stopped at Samsung's logo) and booting into <3e> (Samsung's recovery OS) wasn't possible.
So I'll try with the "russian" firmware now.
how is this different form previous stock versions?
Hi friends,
Is there something you changed in the PIT files for this?
What will happen if I have JB and I take a stock UK LL2 f/w from samfirmware and flash it?
thanks in advance...
jeev_one said:
Hi friends,
Is there something you changed in the PIT files for this?
What will happen if I have JB and I take a stock UK LL2 f/w from samfirmware and flash it?
thanks in advance...
Click to expand...
Click to collapse
Your phone will stuck on Ace 2 Screen .
First you need to flash using Russian Rom then you will be able to flash using UK Rom with change the regio code .
No , PIT File is original without any mods .
mann you r the best!! big thanks! +1
michal_ag said:
Your phone will stuck on Ace 2 Screen .
First you need to flash using Russian Rom then you will be able to flash using UK Rom with change the regio code .
No , PIT File is original without any mods .
Click to expand...
Click to collapse
thanks....also I've just downloaded PIT creator from
http://forum.xda-developers.com/showthread.php?t=1916936
Do you think it will help?
How do i create a UK ROM PIT for myself and avoid "falling into it" ?
regards,
jeev
@jeev_one
If I'm not mistaken,the pit file is the same for the entire Europe.
The problem is UK rom which does not contains all files needed.
Only Russia ROM contains all files needed to downgrade to GB.
jeev_one said:
thanks....also I've just downloaded PIT creator from
http://forum.xda-developers.com/showthread.php?t=1916936
Do you think it will help?
How do i create a UK ROM PIT for myself and avoid "falling into it" ?
regards,
jeev
Click to expand...
Click to collapse
The Problem isn't PIT File . It's universial for GB Roms . Problem is that you need to use 2 file ROM . Only one I found in the internet is this from Russia . Faster way is to install SEK Rom from first post . Then Reflash UK Rom and change Regional Code using *#272*IMEI# .
michal_ag said:
Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood%2BwaVEXcxGbW4T1iWMkicox0%3D
http://d-h.st/AZN
It's only one rom with all working files i wound in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Click to expand...
Click to collapse
Thanks man, you're great
I'm back to GB now!
Cant download from your yandex link. Server cuts me off.
Dr01nE said:
Cant download from your yandex link. Server cuts me off.
Click to expand...
Click to collapse
Try the alternate link (dev-host link). See the first post.
I downloaded from the 2nd (dev-host) link through orbit (download manager)
If i flashed this firmware .. Can i flash another GB firmware ? E.g : Indonesia firmware ?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Rikxzdjz said:
If i flashed this firmware .. Can i flash another GB firmware ? E.g : Indonesia firmware ?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Click to expand...
Click to collapse
I flashed this GB rom and then after that I flashed Polish GB rom. My phone is from Poland.
Sent from my GT-I8160 using xda app-developers app
omer7 said:
Try the alternate link (dev-host link). See the first post.
I downloaded from the 2nd (dev-host) link through orbit (download manager)
Click to expand...
Click to collapse
I don't see dev-host link anywhere in this thread
Sent from my GT-I8160 using xda app-developers app
michal_ag said:
http://d-h.st/AZN
Click to expand...
Click to collapse
Here it is...
Sent from my GT-I8160 using xda app-developers app
It worked like a charm. Thank you so much. JB was draining my battery too fast.
michal_ag said:
Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood+waVEXcxGbW4T1iWMkicox0=
http://d-h.st/AZN
It's only one rom with all working files i found in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Q and A
1.Did I can flash any GB ROM using one file rom and the added PIT File ?
A:No , you can't . First you need reflash your phone using russian 3 file rom , after this you can do everything you want .
2. It's working ?
If you know what is Odin , how to flash and doing everything like in this how to , for sure this is working .
Click to expand...
Click to collapse
Thank you for this, will try as soon as download completes, JB is awesome but still unstable.
Edit: worked great, flashed Russian ROM first, then Polish LL8.
Notes:
- for other noobs like me, the CODE goes to PDA in ODIN
- as mentioned above, after you flash the second ROM, set the regional code by using *#272*IMEI# (generic EU is XEO I believe, it's what I had before I went to JB).
Hi to all members here, can i ask - where can i find stock rom for my region, but i want it to be zip so i can flash from phone, not computer and odin? Thanx in advance
You cannot do a 100% return to stock via zip. You MUST use Odin.
You can flash stock roms via zip but it will not affect bootloader etc needed to return to stock. Have you heard of Mobile Odin?
These are all odin flashable firmware list..
N.B. its not .zip files flashable via CWM.
Thanx both of you, i will use Odin, but where to find latest firmware and how to know which one is for my country?
(i live in Bulgaria, EU)
mirost1 said:
Thanx both of you, i will use Odin, but where to find latest firmware and how to know which one is for my country?
(i live in Bulgaria, EU)
Click to expand...
Click to collapse
sammobile.com
You have to sign up. Then you go to firmware > firmware
There are filters to fill in to get the right one for your country.
other possibility could be mobile odin. then you can flash the .tar files with your phone without pc
Darkened_Sky said:
other possibility could be mobile odin. then you can flash the .tar files with your phone without pc
Click to expand...
Click to collapse
I'd already covered that
Sent from my GT-I9300 using Tapatalk 4
I downloaded the Bulgarian version. I am a little worried about how the phone will work, cause the phone was brought to me from UK, i hope i dont have any problems with the firmware for Bulgaria.
mirost1 said:
I downloaded the Bulgarian version. I am a little worried about how the phone will work, cause the phone was brought to me from UK, i hope i dont have any problems with the firmware for Bulgaria.
Click to expand...
Click to collapse
All GT-i9300 ROMs work on all GT-i9300 devices. They are identical in every way.
rootSU said:
All GT-i9300 ROMs work on all GT-i9300 devices. They are identical in every way.
Click to expand...
Click to collapse
You are such a great guy mate, thanx for all.
You're welcome
Sent from my GT-I9300 using Tapatalk 4