Related
Hey guys. I've been an Android & XDA user for a while now, so this question shouldn't be about a nooby-sitiuation.
My friend bought an AT&T Samsung Galaxy SII (SGH-i777) this week. I've been trying to flash CM7 ever since. I got the rooting done, the properly recovery (with no signature / "abort" problems)
The rom seems to keep bricking the phone. Its simply unflashable. I seen tons of people on XDA who got it to work, with barely any serious problems. I troubleshooted the problem myself, and its simply just the CM7 roms. I would do a full wipe, and then install the rom like I would on my other Android phones, and the installation is successful. When it boots, it gets stuck on the Galaxy SII boot screen (not the splash/boot animation screen) and it would stay on it with a yellow warning triangle on the bottom.
I tried flashing other roms, like Cognition X2, and they worked. Its just CM7 on this phone... which is odd because CM7 is usually stable (nightlies aside.) Especially since the 7.1 stable version was recently released. Anyone can help me get the rom up and going? Would be highly appreciated.
did you try to wipe dalvick cashe as well when you wiped data?
I just flashed it tonight myself and all I did was reboot into CWM and did a Wipe data/factory reset and then Wipe cache partition. After doing that, I simply flashed the cm7 zip file that was loaded on my internal sd. Rebooted and no problems.
I didn't have ANH ISSUES installing it but I know I read that some.people bad to flash it twice initially. So flash it, then when it goes back to the recovery screen flash it a second time. I also remember users on the international SGS2 bad to do the same thing. Most have no issues but I think they found that it depends on what you used to root your phone (on the SGS2 internationals) and I THINK some had to do the same here. Try it and if it works just hit the thanks button.
Sent from My KickAss CM7 Galaxy S2
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
How do you boot into recovery? I know On the SGH-i777 you have to hold the Vol down+back+power to get to the Download mode, but I tried everything to get to the recovery itself.
Boobie Watcher said:
did you try to wipe dalvick cashe as well when you wiped data?
Click to expand...
Click to collapse
Yes. I've flashed many roms before, this seems to be the only one I had ever seen a problem with.
mfpearson said:
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
Click to expand...
Click to collapse
Word.
Edit: To boot into recovery vol up+vol down+power
Had the same problem. Read somewhere to install the ROM twice in a row in CWM without rebooting inbetween. Worked like a charm.
Thanks for the feedback guys. I'll try this in the morning once I get my hands on the phone again.
Saw this type of behaviour on occasion with cm7 on my aria. Sometimes caused by a bad download of the rom. Did you verify md5s ?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Don't forget to do a master data clear /reset before trying to boot the new CM7 rom for the first time - clear out the old stuff. Works perfectly here.
Sent from my SGH-I777 using xda premium
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
squigge said:
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
Click to expand...
Click to collapse
That's the way I did it. Put the update in the same folder on the internal SD card. I can't even access my external SD card from CWM.
Sent from my SGH-I777 using xda premium
Hmm, I'm not sure what I'm doing wrong then. I did a factory reset, and wiped the cache and get the same thing. I know it wiped because now I have nothing setup on the phone when I boot normally. Suggestions?
Quit downloading the CM7 builds for the International Galaxy S II. They will NOT work. That is why it fails. Look for the Galaxys2ATT build.
Sent from my SGH-I777 using xda premium
I got the build by going to the cm7 website, looking by device, finding the galaxy s 2 and grabbing the stable one. So perhaps that is the incorrect one and I'll look closer for one that has att in it, whenever the site isn't going up and down. They seem to be having issues today.
Make sure you're installing the version located in this thread...
http://forum.xda-developers.com/showthread.php?t=1297568
Specifically this link
Double flash made it work. Thanks guys. + thanks for telling me how to boot into recovery lol. Great rom.
Sorry for the newb issues, it was the wrong version. I got the att version from the thread previously mentioned and that worked perfectly. Thanks!
Noob here, please bear with me:
Updated my I577 to ICS, then rooted it using this thread: http://forum.xda-developers.com/showthread.php?t=1806118
Worked like a charm, then I picked up ROM Toolbox Lite from PlayStore, which worked fine until I tried to change themes.
Somehow, it got to where boot was stuck at vendor logo. Unfortunately I did not Nandroid backup in time, but I was able to do a Kies backup before rooting, so not worry about the data loss at this time.
Used CWM5, did davlik & cache wipes, factory resets several times, no dice. No stock ROM available so I tried this:
http://forum.xda-developers.com/showpost.php?p=30444507&postcount=6
(flashed system tar through ODIN) Hanged at "system.img.ext4".
Here's where I'm at now:
-- Boot looping at second Samsung logo
-- ODIN 1.85 still reads device at port
-- Battery indicator visible when plugged in & power off.
-- Still able to get to cwm recovery 5.5.0.4
So, IS IT SOFT BRICKED OR HARD BRICKED?
Bonus Question: Is it unbrickable?
Any input or answers are GREATLY appreciated, and a fix will most likely be monetarily compensated through Paypal.
Black-wolf, j3r3goss, or shabbypenguin if you see this, your input is certainly appreciated as well!
Its soft bricked. Hard brick means there is no life at all and won't even power on (through software).
Any soft brick is unbrickable, the only nonunbrickable brick is a hard brick (which is rare)
Sent from my MB508 using xda premium
If you can get into Clockwork Mod Recovery still then select wipe data (Do this twice), then select whipe cache (Do this twice), next select factory reset (Do this twice), finally go back and select reboot system. This should unbrick your phone for you
Sent from my SCH-I535 using xda premium
shimp208 said:
If you can get into Clockwork Mod Recovery still then select wipe data (Do this twice), then select whipe cache (Do this twice), next select factory reset (Do this twice), finally go back and select reboot system. This should unbrick your phone for you
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
This.
If you can get into recovery you're only in shallow water
Sent from my MB508 using xda premium
Something's changed
THANKS so far for the input!
I was able to nandroid out of the loop, but now it's back to my original problem--it keeps booting to the "Rethink Possible" AT&T screen & freezing.
Any ideas? I'm thinking I'm gonna be outta luck until I get my hands on a legit Gingerbread Stock tar.
Did you whipe cache, whipe data and preform a factory reset like we suggested? Preforming a nandroid restore won't get you out of your phone hanging on the at&t logo.
Sent from my SCH-I535 using xda premium
Samsung Galaxy Ace GT-S5830i brick
hey there im a noob to all this but i registered to see if someone here could give me advice.
i tried to flash a new rom on my phone (see title) and it doesnt do a thing anymore...
i rooted it and tried to put Retribution beta_2 on it and itlooked to be working till it rebooted..
all i got was the startup screen with galaxy ace gt-s5830i.
i looked around and i found that i could use download mode and odin 1 click download to put in a new rom.
so i tried that and it looked to be working but it stalled at end of install and now it doesnt even turn on anymore...
HELP!!!
hope someone knows whats up and can give me some advice.
i hope i didnr hardbrick it like i saw in this thread...
Emil.warm said:
hey there im a noob to all this but i registered to see if someone here could give me advice.
i tried to flash a new rom on my phone (see title) and it doesnt do a thing anymore...
i rooted it and tried to put Retribution beta_2 on it and itlooked to be working till it rebooted..
all i got was the startup screen with galaxy ace gt-s5830i.
i looked around and i found that i could use download mode and odin 1 click download to put in a new rom.
so i tried that and it looked to be working but it stalled at end of install and now it doesnt even turn on anymore...
HELP!!!
hope someone knows whats up and can give me some advice.
i hope i didnr hardbrick it like i saw in this thread...
Click to expand...
Click to collapse
Are you able to get into recovery mode? Did you flash a custom recovery such as TWRP or Clockwork Mod Recovery?
Samsung Galaxy Ace GT-S5830i brick -
shimp208 said:
Are you able to get into recovery mode? Did you flash a custom recovery such as TWRP or Clockwork Mod Recovery?
Click to expand...
Click to collapse
Hi thanks for your response to my problem,
yes i flashed a custom recovery from clockwork and i rooted it. i cant get in to recovery mode.
after i did that i tried flashing custom rom like i said before but after reboot it didnt do anything.
i just got the startscreen and found that i could use download mode and odin to flash original rom.
i used 1 click downloader from Odin and it started to recover my rom,but at the end it stalled.
after that happened i couldnt do anything anymore.
i thought it was totally dead but i just saw that when i connect to my comp it says unknown device..
im an idiot for trying this stuff without the knowledge..it looked easy in descriptions
but i found different descriptions how to do it..
i cant put links in my posts yet cause i am new..
i used the 1st one.. but after that didnt work i found that other 1 and that is little different...
.android.gs/update-galaxy-ace-s5830i-retribution-gingerbread-2-3-6
.technostall.com/samsung-galaxy-ace-s5830i-installing-retribution-custom-rom-firmware
i hope i have given you enough info
greets Emil
Hmm today i found out smth new,i installed some samsung drivers and now my phone is recognized as a samsung android phone-android composite adb interface its says in device mananger on my laptop.
All Fixed!
shimp208 said:
Did you whipe cache, whipe data and preform a factory reset like we suggested? Preforming a nandroid restore won't get you out of your phone hanging on the at&t logo.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I did all that, but the one thing that finally nailed it was formatting my internal SD. I also formatted my external one, but I don't even think I put it back in the phone.
So, if anybody's reading this in the future, and you're still stuck after wiping the cache, wiping Davlik & performing factory reset,
FORMAT THE SD!
And flash this through Odin: http://forum.xda-developers.com/showpost.php?p=31765274&postcount=59
Huge thanks to j3r3goss!! :good::good::good:
Main Exhilarate thread here:
http://forum.xda-developers.com/showthread.php?t=1926253
Soft bricked my galaxy s4
gagdude said:
Its soft bricked. Hard brick means there is no life at all and won't even power on (through software).
Any soft brick is unbrickable, the only nonunbrickable brick is a hard brick (which is rare)
Sent from my MB508 using xda premium
Click to expand...
Click to collapse
Hey, total noob here but Im having problems with my Galaxy S4 so I was on this thread looking for a fix.I have an AT&T Galaxy s4 (SGH-I337) and I just rooted my phone and installed clockworkmod recovery. I went to backup and then when I rebooted it freezes at the AT&T logo. Ive wiped data/factory reset, wiped caches, etc ive done everything and it freezes at the same spot. I have no ROMS as I had just rooted, just stock 4.2.2. Then I saw a vid on how to unroot/unbrick and it was working perfectly until it went to reboot.(I downloaded 4.2.2 firmware for my model phone) I used ODIN and it said pass then when it was rebooting it froze in the exact same spot (also instead of the normal bootup it still had the "custom" and an unlocked lock that Ive had since I rooted) and now I cant enter recovery mode. It starts booting but then freezes when the blue letters come on! Now even when I try to turn it on normally it freezes at the samsung logo (with unlocked lock and "custom")Please help! I would greatly appreciate it!
This is the situation and what ive tried to fix it. I was on cm9 and wanted to try jellybam so I flashed using cwm . It was successful but wouldn't boot so I tried to reinstall the rom still no luck so I tried going back to cm9 and it got stuck on the s2 logo screen ! I tried odin to flash a stock rom and it was successful but still stuck on the logo screen. Ive tried gb and ics ive tried to flash with and without bootloaders ive tried reparation but that only fails unless I use the pit file but still didn't fix it. If I flash the stock rooted ics rom and then flash cwm zip i can wipe system then flash cm9/10 but that only gets me to the cm animation . It will sit there till the end of time but wont boot! In cwm If I check the log I get this error I:can't partition unsafe device:/dev/block/mmcb1k1p1. It wont factory reset on stock or cwm it only freezes then bootloops. I hope this is enough info please help me! I love my s2 and even tho I have my s3 I miss my s2
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Did you factory reset? What do you mean you reset and it bootloops
Sent from my GS4 running CM11 Kandy Kane
122ninjas said:
Did you factory reset? What do you mean you reset and it bootloops
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
. yes I tried to factory reset but it just freezes then after 5 min. It try's to boot but gets stuck on the galaxy s2 logo screen. I checked the log in cwm and got the error I posted above. I've been flashing for years and never run into an issue I couldn't fix but this one has me stumped
troutslayermv said:
. yes I tried to factory reset but it just freezes then after 5 min. It try's to boot but gets stuck on the galaxy s2 logo screen. I checked the log in cwm and got the error I posted above. I've been flashing for years and never run into an issue I couldn't fix but this one has me stumped
Click to expand...
Click to collapse
Sorry if this sounds rude but have you googled that error?
Sent from my GS4 running CM11 Kandy Kane
Lol no that's not rude. I would ask the same question. ..I did and from what I've gathered its a corrupt sd card or part of the emmc brick bug. There are patched kernels to fix the same issue on the note but nothing for i777. All it says is factory reset and flash a new rom . Ive done that but still no boot. Roms flash fine and I can get into download mode and recovery but It wont factory reset or boot. Stock recovery says your ui is not prepared please factory reset and a bunch of can't mount data errors but it won't factory reset it just freezes then trys to reboot but gets stuck on the s2 logo then back to recovery. Here is the kicker tho. If I install a duel booting kernel I can install a second rom that boots but primary won't. ...I tried swapping primary and secondary roms but it froze....im just lost on this one and out of tricks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I'm not sure what partition that is. You've go a typo in it, but if the last three letters are correct "1p1", I don't remember seeing that as one of the system partitions. The kernel is in "mmcblk0p5" for instance. It should be "mmcblk1p1" I guess.
If you suspect memory damage to that partition, you can confirm that by trying to pull the data from that memory block with adb or terminal using the following command:
Code:
dd if=/dev/block/mmcblk1p1 of=/sdcard/testBLK
If the memory is damaged, you will get an error message. If the memory block is good, you will get no error message. I guess you could also look into "testBLK" to see what is in there, but of course it will be binary data most likely.
That's the error I got 1p1. Abd is something I haven't done yet. I've used terminal emulator back in the days of my cliq dext but im sure I can handle it...im pretty sure it is corrupt but if I do the test and confirm this how do I fix it? Is it just a matter of deleting or do I have to rewrite the path? Im confused on this
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Actually, this was bad advice. Since your phone is bootlooping, you can't use terminal, doh! If you can get into recovery, you might be able to use adb. Or you could use Red_81's adb portable. You could also try his adb batch file from download mode to see if you can boot it into recovery mode. I guess it will take a little study if you have no experience with it.
Oh, and if the memory is bad, its bad. This is just a way to find out, maybe.
So what your saying is it's dead?!!!
Noooooooo! Lol im looking into maybe getting another one or shipping this one to Samsung to have a new motherboard put in . Just trying to see if there is any hope of bringing her back to life...
sent from my stock galaxy s3
devices: g1 died
cliq/dext sold to developer on simply android
atrix 1 and 2 sold
s2 in a comma
nexus 7 stock
s3 stock
iphone 4 stock
troutslayermv said:
So what your saying is it's dead?!!!
Noooooooo!
Click to expand...
Click to collapse
Not saying that unless you verify for sure that the memory is bad. The only time I've actually heard of eMMC damage, and seen it verified, was in conjunction with the bad stock kernel on 4.0.4. There was also another case where a member sent his phone to Josh at Mobile Tech Videos for Jtag repair, and it was sent back unrepairable due to memory damage. I can't remember for sure, but I think that was due to the 4.0.4 stock kernel too.
You might talk to Josh at Mobile Tech Videos by phone to see what he thinks, before you send it to Samsung.
I tried contacting josh and couldn't reach anyone. I left a message and sent and email but haven't heard back. I tried using adb portable and as I did that I think that I didn't make the phone issues clear. I can get into recovery mode fine I can also get into download mode fine . I can flash roms fine but it won't go past the s2 logo screen . If I flash cyanogen it will go to the cyanogen boot screen but again won't boot. I am still trying to find a solution in my free time but nothing yet
sent from my stock galaxy s3
devices: g1 died
cliq/dext sold to developer on simply android
atrix 1 and 2 sold
s2 in a comma
nexus 7 stock
s3 stock
iphone 4 stock
troutslayermv said:
I tried contacting josh and couldn't reach anyone. I left a message and sent and email but haven't heard back. I tried using adb portable and as I did that I think that I didn't make the phone issues clear. I can get into recovery mode fine I can also get into download mode fine . I can flash roms fine but it won't go past the s2 logo screen . If I flash cyanogen it will go to the cyanogen boot screen but again won't boot. I am still trying to find a solution in my free time but nothing yet
sent from my stock galaxy s3
devices: g1 died
cliq/dext sold to developer on simply android
atrix 1 and 2 sold
s2 in a comma
nexus 7 stock
s3 stock
iphone 4 stock
Click to expand...
Click to collapse
I have run into something similar, my wife has the s2... I have the s3....
this is the steps I run to get the s2 working after it gets stuck...
1 - installed stock rom I777UCKH7 OCD Root No BL = self executable from windows.... brings you to stock with root..
forget this one, this is when I was first rooting... 2 - DooMLoRD_v4_ROOT-zergRush-busybox-su
3 - MobileODINLite-v3.57
4 - MobileODIN_FlashKernel_I777-v1.0
5 - flash kernal Siyah-v2.6.14-att.tar = installs recovery clockwork mod
6 - install any rom....
Download mode on S2 is volume up and down and power button....
I can't get it to boot up so I can't use mobile odin. I've tried one click and also tried every stock tar I could find . I even tried to reinstall the bootloaders. They all install successful but it wont boot past the s2 logo screen. Im not a noob , I've flashed hundreds of times. I've fixed a few bricks in my day but this has me stumped. ...if you install the stock rom there isn't any reason why it shouldn't boot. But it is just stuck. Nothing has worked. I think the only thing that may work is the re write the memory but im not that patient to do that lol
sent from my stock galaxy s3
devices: g1 died
cliq/dext sold to developer on simply android
atrix 1 and 2 sold
s2 in a comma
nexus 7 stock
s3 stock
iphone 4 stock
Have U tried threatening it? Just give it a little scare. It'll back dowin. Gotta keep thoz hoez in line.
Phalanx7621 said:
Have U tried threatening it? Just give it a little scare. It'll back dowin. Gotta keep thoz hoez in line.
Click to expand...
Click to collapse
ROFL
Sent from my SGH-I777 using xda premium
gireeshtty9 said:
ROFL
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Just curious if you unmounted and remounted the partitions?
or maybe formatted them individually?
Soft-bricked Galaxy 2 SGH-I777. Odin of no use
I bought a galaxy 3. I literally tried everything with this phone. Was able to root, went to install siyah kernel from zip and now I get the samsung logo. I can boot into CWM recovery, but none of the functions work--just hangs on the hat. Any ideas are greatly appreciated. Thanks.
keltaurn said:
...Any ideas are greatly appreciated...
Click to expand...
Click to collapse
Please don't re-post; your question has been answered in the thread you created. Please search for answers first; the solution to your problem is safely housed in a sticky in the General section.
Thanks but...
I can't flash anything so this would be a new thread. The poster above said he/she could flash toms. I CANNOT. Also, I've been looking on here for solutions for over a month. This is my first post.
I have a T-Mobile Galaxy Vibrant that was running Android 2.1. I rooted the phone (successfully), and installed Slim Bean 4.2.2 plus Google apps. Everything was going smoothly and I was reinstalling apps and data when I noticed that I had no network phone connection. Slim Beam did not seem to recognize the sim, and I came up empty searching for networks. I removed the sim and put it in another phone, and everything was fine.
I decided to restore the previous android 2.1 (which I had backed up) using ClockWorkMod Recovery. I did restore, then reboot. Now the only thing I get is the initial screen ... Vibrant and Samsung in bold white letters. I have tried repeatedly to launch CWM Recovery, without success.
Is it time for a new phone?
Thanks!
MaydayMalone said:
I have a T-Mobile Galaxy Vibrant that was running Android 2.1. I rooted the phone (successfully), and installed Slim Bean 4.2.2 plus Google apps. Everything was going smoothly and I was reinstalling apps and data when I noticed that I had no network phone connection. Slim Beam did not seem to recognize the sim, and I came up empty searching for networks. I removed the sim and put it in another phone, and everything was fine.
I decided to restore the previous android 2.1 (which I had backed up) using ClockWorkMod Recovery. I did restore, then reboot. Now the only thing I get is the initial screen ... Vibrant and Samsung in bold white letters. I have tried repeatedly to launch CWM Recovery, without success.
Is it time for a new phone?
Thanks!
Click to expand...
Click to collapse
If you can't go to cwm menu as well than I guess a jtag is needed. Or there may be some other solution, try digging through the net... or the experts in here can help u as well
Sent from my Micromax A87 using xda premium
MaydayMalone said:
Is it time for a new phone?
Thanks!
Click to expand...
Click to collapse
Are you able to get into download mode? I would recommend taking a look at this video if your unsure how to get into download mode https://www.google.com/url?sa=t&sou...f1zo4TtaBqqpMHcnw&sig2=u29A32xeMmrpJpMo2hwuxA.
Sent from my SCH-I535 using xda premium
Thanks for the suggestions
Thanks for the suggestions, but my phone is somewhat "challenged." I got it for free (that's the good news). The previous owner gave it to me after the power port/usb connector got damaged (that's the bad news). As I understand it, all the suggestions require a usb connection ... something I've been able to live without for the last year. Maybe I should give it a shot and get the usb port repaired, or maybe it would be cheaper/smarter to go shopping. I'm going to need time to think about that.
Thanks again to both of you.
MM
MaydayMalone said:
Thanks for the suggestions, but my phone is somewhat "challenged." I got it for free (that's the good news). The previous owner gave it to me after the power port/usb connector got damaged (that's the bad news). As I understand it, all the suggestions require a usb connection ... something I've been able to live without for the last year. Maybe I should give it a shot and get the usb port repaired, or maybe it would be cheaper/smarter to go shopping. I'm going to need time to think about that.
Thanks again to both of you.
MM
Click to expand...
Click to collapse
If there's any way you can get into cwm mode then you can first add the zip file of the custom rom from your pc to your sd card via a card reader and then try to flash a new rom. I think the problem you are getting at the moment is because you did not format dalvik cache and some other things before flashing
Sent from my Micromax A87 using xda premium
RazaVakil7995 said:
If there's any way you can get into cwm mode then you can first add the zip file of the custom rom from your pc to your sd card via a card reader and then try to flash a new rom. I think the problem you are getting at the moment is because you did not format dalvik cache and some other things before flashing
Sent from my Micromax A87 using xda premium
Click to expand...
Click to collapse
I keep trying to launch CWM Recovery, but no such luck. The initial screen with Samsung and Vibrant appears, then nothing. I have to pull the battery to turn the phone off. I did wipe the dalvik cache before installing Slim Bean, but not before the reboot. Thanks for following up, but I've got a bad feeling about this.
MM
MaydayMalone said:
I keep trying to launch CWM Recovery, but no such luck. The initial screen with Samsung and Vibrant appears, then nothing. I have to pull the battery to turn the phone off. I did wipe the dalvik cache before installing Slim Bean, but not before the reboot. Thanks for following up, but I've got a bad feeling about this.
MM
Click to expand...
Click to collapse
The last resort is probably the samsung service center. They'll repair it for a hefty price but that'll be less than the price of a whole new phone..... sorry about your loss
Sent from my Micromax A87 using xda premium
Hey there,
Today I received an MHL-adapter for my Galaxy S3 and wanted to try it out. Since it didn't work in combination with Slim Bean I decided to flash another rom (more on the sammy side of things). Coming across a thread with a guy pointing out a so called Chameleon crossover rom, I decided to give it a go, downloaded and flashed it. I shat bricks as I saw that, in my euphoria to try the adapter, I flashed a rom that was meant to be for the Galaxy S2!
So I restarted into recovery and tried to perform a full wipe, which didn't work, because it wasn't able to load the partitions (data etc.) then I tried to flash on a recent backup of Slim Bean, which was only partly succsessfull, meaning, that it flashed but couldn't wipe because of the reason mentioned above.
Booting into system doesn't work either, I just get a bootloop.
Right now im not quite sure, which step to take. Shall i flash on a clean stock-image via Odin or maybe try out something like One-Click UnBrick?
All your help and suggestions are highly appreciated!
rockband said:
Hey there,
Today I received an MHL-adapter for my Galaxy S3 and wanted to try it out. Since it didn't work in combination with Slim Bean I decided to flash another rom (more on the sammy side of things). Coming across a thread with a guy pointing out a so called Chameleon crossover rom, I decided to give it a go, downloaded and flashed it. I shat bricks as I saw that, in my euphoria to try the adapter, I flashed a rom that was meant to be for the Galaxy S2!
So I restarted into recovery and tried to perform a full wipe, which didn't work, because it wasn't able to load the partitions (data etc.) then I tried to flash on a recent backup of Slim Bean, which was only partly succsessfull, meaning, that it flashed but couldn't wipe because of the reason mentioned above.
Booting into system doesn't work either, I just get a bootloop.
Right now im not quite sure, which step to take. Shall i flash on a clean stock-image via Odin or maybe try out something like One-Click UnBrick?
All your help and suggestions are highly appreciated!
Click to expand...
Click to collapse
Odion stock. If that fails you'll need to find and flash with a PIT
rootSU said:
Odion stock. If that fails you'll need to find and flash with a PIT
Click to expand...
Click to collapse
Thank you so much for the quick response, I'm going to check whether it works and report back after it's done! :good:
G'Luck
Problem solved, thanks rootSU!
So, if someone is following this thread, I just want to share with you guys what I did and how it turned out:
I flashed the original firmware, according to region etc. via Odin, the procedure was succsessfull and I rebooted.
At first I had a bootloop, so I went into the stock recovery and hit "wipe /data and /cache", which was succsessfull as well, meaning that the previous problem with not being able to mount the partitions was resolved. So I went ahead and rebooted again aaand it booted!
Everything is working fine as far as i can tell, no misfunctions, hot reboots or anything similar.
Thanks very much for the quick response rootSU, which prevented me from hyperventilating .
I've rooted, unlocked bootloader and flashed stuff on my former phones (Htc Wildfire, Galaxy S) and I've never done anything like that before and nothing like that ever happened to me. So to anyone reading this, I highly encourage you not to be as dumb as me and to doublecheck what rom you're flashing and not to flash while being overly exicted about anything .
Does your adapter now work?
Sent from my GT-I9300 using xda app-developers app
Never panic. Read lots and dont do anything you don't understand. That's my advice when you're in an S3 pickle
Sent from my GT-I9300 using Tapatalk 2
Very good advice
Sent from my GT-I9300 using xda app-developers app