Hi all.
I am trying to update my touch buttons firmware, due the fact I am not satisfied with my "back" button responsiveness.
I know the code that should bring me to the update screen ( *#*#2663#*#* ) , but in CM9 ROM , it does nothing.
In my friend's SGS2 , which runs stock Android 4 ROM, update screen appears as expected.
The question is, which files do I have to pull from stock and push to CM9 , in order to get that update screen working?
Thank you in advance!
f_mulder said:
Hi all.
I am trying to update my touch buttons firmware, due the fact I am not satisfied with my "back" button responsiveness.
I know the code that should bring me to the update screen ( *#*#2663#*#* ) , but in CM9 ROM , it does nothing.
In my friend's SGS2 , which runs stock Android 4 ROM, update screen appears as expected.
The question is, which files do I have to pull from stock and push to CM9 , in order to get that update screen working?
Thank you in advance!
Click to expand...
Click to collapse
In Aosp based ROMs, Samsung Service codes does not and will not work. So don't disturb yourself
The only codes that work are for Service mode and Engineering Mode. Any other code will not work.
If you care so much about this code, just flash a stock based ROM, or live with it.
Related
When the "official" ICS for the galaxy tab was released, I was pleased to know that now I would have the cameras working again, I use my tablet for skype, so that where good news. But immediately after installing the official release, I started to miss CyanogenMod. Can you tell me if someone is working in CM9 with working cameras.
List of things so far:
-No Power Button Menu (when I press the power button the tab immediately turns off)
-No 3G
-No system tray auto hide options
-No Lockscreen
-Settings menu oversimplified
Any help solving any this problems would help a lot.
Forget the release date please help me with the following:
-Power Button Menu (Recover, Reboot, Profile, etc)
-System tray auto hide
-Lockscreen
Please!!!
I'm not sure what you mean by power button and lockscreen. Power button has airplane mode and reboot enabled in official ics. And lockscreen works also.
Sent from my amazing 10.1 galaxy tab
All I can say is check the threads for the SGT they are always busy trying to fix things also you can always go to there website. If all fails and and you really need the camera I suggest don't flash anything until its fixed cause flashing a rom knowing that the camera does not work then asking for a fix will only irritate the devs...
Sent from my GT-P7510 using xda premium
I think that the release is near now that Samsung has released de source code, pershoot is working in get a CM9 fully working, and the base CM9 is already stable. I hope to see a CM9 stable in the next weeks (maybe days? :fingers-crossed: )
Looking forward to a stable CM9 release on our Tabs. I'm not that big a fan of the stock TouchWiz ICS, but since it has a working camera, it'll do for now.
Well now that the real ics stock rom is out I'm sure they can move toward...
Sent from my GT-7510 Stock ICS ROM 4.0.4 using XDA Premium
CM9 camera not working
Since im a noob on XDA I'll take the punishment for the next question
every one is going back and forth on the camera not working on galaxy tab 10.1 with CM9
is there now n actual rom (jellybean or else) for tab 10.1, or update for CM9 where the camera works
also, is there a web site that i can go to that gives proper step by step instructions for installing and rooting the tablet
i used a pcmag link previously to install CM9 - works well exept for the camera
[email protected] said:
Since im a noob on XDA I'll take the punishment for the next question
every one is going back and forth on the camera not working on galaxy tab 10.1 with CM9
is there now n actual rom (jellybean or else) for tab 10.1, or update for CM9 where the camera works
also, is there a web site that i can go to that gives proper step by step instructions for installing and rooting the tablet
i used a pcmag link previously to install CM9 - works well exept for the camera
Click to expand...
Click to collapse
The only rom that work cameras is the touchwiz ics from samsung..
http://forum.xda-developers.com/showthread.php?t=1870561
I found this threat today, but didn't solve any of the problems, can someone try it and say if this works.
Original poster: There is definitley something wrong with your tab. If you have flashed the correct CM build for your tab all those things should be working. If I were you I would flash to stock ICS with Odin using the correct firmware for your region from www.sammobile.com This will put you on the ICS bootloader, it will also wipe your sd partition but its the best way to start fresh. Then flash the appropriate CM build for your model from pershoots blog http://droidbasement.com/galaxy/roms/cm9/ the one dated 09/01 is the most recent and is built from the 3.1 kernel source so both cameras are working. Be sure to use the supplied CWM recovery and perform all necessary wipes i.e Cache, dalvnik cache, factory reset.
To all others: Pershoot is working on getting CM9 to RC status before work begins on CM10. He does great work so be patient.
Hi,
Everything was working fine on my Samsung galaxy s alpa sc-03e this is the link to the thread http://forum.xda-developers.com/gala...c-03e-t2172063, I have successfully rooted and installed recovery and enjoying the few custom roms, then suddenly I installed S3 i9305 rom didn't got the success, then install philz recovery http://www.anniblue.com/xda/xda_sc-0...3E/Recoveries/ and installed slim rom from Note 2 section http://forum.xda-developers.com/show....php?t=2529266 and then after appearing docomo logo black screen, then I put it on Download mode and installed stock rom but now touch not working. How can i access to this ? Its never happened in my life after installing so many roms in so many devices. Please I need Pro advice ? And also Black Button key is not working, How I can remap all this ?
Also I have posted this on http://forum.xda-developers.com/gal...japanese-sgs-iii-sc-03e-t2172063/post52482982
Also tired *#2663# but nothing is happening instead after connecting through otg cable with a help of mouse the its come to the home screen ?
I have tried *#0*# each and everything is working but except the touch and also my keys switch to another.
Any idea ?
anyone can help ? I need the solution badly :s
Man, you flashed a rom for another device...Why?
Have you tried a factory reset, or another custom rom/kernel to see if the problem persists?
Sent from my Nexus 4 using Tapatalk
Well only there are very few limited ROMS for this model, plus I have bring my phone to Stock and also tried several codes but nothing happened and also tried custom roms :s
Ok lets forget everything how can I remap my 2 keys ( Back and settings ) Back key working as a setting and settings changed in to back key, by flashing another rom
Anyhelp ?
http://repo.xposed.info/module/com.spazedog.xposed.additionsgb
Thanks for replying but will also re-calibrate my touch ? Coz after flashing another Rom my touch screen also not working along with the buttons,
or is there any software or tool from where I can check about touch screen ? coz *#2663# is not working.....
Solution for recovering the touch of SC-03E samsung galaxy SIII alpha
hi bro I have same issue with my SC-03E galaxy SIII touch because of wrong firmware note 2 i have successfully recover the touch I am the only person in the world who successfully recover my phones touch but my keys are still works opposite all other things are working fine now I made the kernel who recover touch i have the solution if you want then mail me at [email protected] or contact me at +923008090600 its my international number you can sms me or call me I am from Pakistan
Hi Guys ...
For couple of weeks i am having an problem with my soft keys ... when i restart or power off my phone and then turn on , the soft keys of S3 dont light up and dont work ... when i make an several restarts of phone sometimes they work untlin i have to turn off my phone again ...
i have reflashed an stock rom and still same problem ...
now i am on deodexed rom from Alexandr . the android version is 4.3 , and it is rooted too ...
my kernel is boeffla 5.2 stable version but i dont think the problem is with kernel because i have flashed stock kernel and the same problem with soft keys is there ... any suggestion guys ?
xeinebiu said:
Hi Guys ...
For couple of weeks i am having an problem with my soft keys ... when i restart or power off my phone and then turn on , the soft keys of S3 dont light up and dont work ... when i make an several restarts of phone sometimes they work untlin i have to turn off my phone again ...
i have reflashed an stock rom and still same problem ...
now i am on deodexed rom from Alexandr . the android version is 4.3 , and it is rooted too ...
my kernel is boeffla 5.2 stable version but i dont think the problem is with kernel because i have flashed stock kernel and the same problem with soft keys is there ... any suggestion guys ?
Click to expand...
Click to collapse
Sorry to state the obvious but if you have tried flashing different roms and kernels then there is only one logical option it can be and that is hardware problem.:crying:
I don't think there is any miracle software problem here just a trip to the service center....
Hi Guys
Well my phone have the Cyanogenmod Cm 11 Kit Kat 4.4.4 installed and was working really fine , now it has the last update from cyanogenmod, and the other day without any drop or whatever ,my touchscreen started to fail a bit like sometimes it responded and sometimes not, to the point where now the only key that works is the back key and the physical home button, everything else is dead i cant touch anywhere now, can you tell me if this is a hardware problem or a software ? i installed many versions of cyanogenmod to test, but the screen still dont respond, now i have installed the last update 4.4.4, need help please.
Thanks
PS. sorry for my english
helderhalen said:
Hi Guys
Well my phone have the Cyanogenmod Cm 11 Kit Kat 4.4.4 installed and was working really fine , now it has the last update from cyanogenmod, and the other day without any drop or whatever ,my touchscreen started to fail a bit like sometimes it responded and sometimes not, to the point where now the only key that works is the back key and the physical home button, everything else is dead i cant touch anywhere now, can you tell me if this is a hardware problem or a software ? i installed many versions of cyanogenmod to test, but the screen still dont respond, now i have installed the last update 4.4.4, need help please.
Thanks
PS. sorry for my english
Click to expand...
Click to collapse
Anyone ?? Help please
I really thank to u #doesntexits, #Dreamstar, #ngoquang2708 and all the guys who made an ausome custom stock rom CyanogenMod 13, ROM for the Samsung Galaxy Core Prime (sm g360h). After installing the beta-4 version i had came to know that during incoming and out going running calls i cant able to use my keypad or niether see the end/ans key. the only thing i can see is the BLACK SCREEN.
any solution for this then please other wise i have to go back the older original 4.4 stock rom.
and 1 more problem is there that when i over write the "buil.prop" file file (forum.xda-developers.com/attachment.php?attachmentid=3873712&d=1473757929) after restart my phone does't started aging .
thanks
waiting for the ans........