Help, Vibrant does not boot - Vibrant Q&A, Help & Troubleshooting

I've been using the euphoria ROM for a few months now with no incident. The phone has never given me problems of any sort, well the bad GPS, but that's a known issue.
Anyhow the other night went to bed without charging my phone. In the middle of the night I woke up and realized it was not charging, so I connected the charger and went back to bed. However by that time my phone has fully discharged so I got the battery graphics.
In the morning when I tried to turn the phone on I got the spiral boot icon and then a black screen.
I've tried to get the recovery mode but to no avail. I know the phone is somewhat working because i get the spiral boot animation and the charging graphics but i cannot get the phone to turn on. Did anybody know a fix, any advice will help.
Thanks in advance
=X=

I like your name, X (thats my nickname around here )
Anyways, when you plug it in, does the charging stuff come up? (if yes, how much battery do you suppose its at?)
Have you tried download mode? (take out battery, plug in USB, put battery back in while holding... I think its vol up and down + power, after it says VIBRANT let power go)
I'm not sure if your phone even goes that far.

Likewise I like your nickname.
My battery is close to 100%. I tried the sequence you mentioned with no luck. I get the same behavior, I get the spiral boot graphics and the phone good black. With the cable connected I get the charging battery graphics. The graphics does work properly. When the battery gets to 100% it vibrates too
=X=
Sent from my SGH-T889 using Tapatalk 2

=X= said:
Likewise I like your nickname.
My battery is close to 100%. I tried the sequence you mentioned with no luck. I get the same behavior, I get the spiral boot graphics and the phone good black. With the cable connected I get the charging battery graphics. The graphics does work properly. When the battery gets to 100% it vibrates too
=X=
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Just curious, what ROM/kernel were you on?
Also, by the spiral graphics are you talking about the bootanimation?
Are you on Froyo bootloaders or Gingerbread bootloaders?(if you don't know and have never messed with bootloaders its froyo)

I'm running Chimera v2.2. It's an ICS ROM made by team passion. The kernel is 3.1.10
Yes by the spiral I mean the boot animation. You only ever see it from a cold boot.
I don't know what boot loader I'm running.I think team passion is using the same one as Cyanogen. It's that common boot loader with a GUI.

=X= said:
I'm running Chimera v2.2. It's an ICS ROM made by team passion. The kernel is 3.1.10
Yes by the spiral I mean the boot animation. You only ever see it from a cold boot.
I don't know what boot loader I'm running.I think team passion is using the same one as Cyanogen. It's that common boot loader with a GUI.
Click to expand...
Click to collapse
Well the bootloader doesn't really use a GUI. You might be talking about the recovery, the one with "reboot system" and "install zip from sdcard"

What i was referring to was when i was installing the Chimera ROM I hadn't use a GUI app to install the ROM l. I thought the instructions mentioned it was installing a bootloader, but I could have miss read it.
Okay, X, I tried the steps again. I realize I did not follow all of your steps so I repeated them again. This time in tried the three finger salute with the USB plugged in and it worked. I get the recovery menu by choosing reboot it boots up properly.
However when I shutdown and turn on the phone I'm back to square one
=X=

=X= said:
What i was referring to was when i was installing the Chimera ROM I hadn't use a GUI app to install the ROM l. I thought the instructions mentioned it was installing a bootloader, but I could have miss read it.
Okay, X, I tried the steps again. I realize I did not follow all of your steps so I repeated them again. This time in tried the three finger salute with the USB plugged in and it worked. I get the recovery menu by choosing reboot it boots up properly.
However when I shutdown and turn on the phone I'm back to square one
=X=
Click to expand...
Click to collapse
Wait.. so when you tried my method your phone actually booted all the way up??
I was planning for you to go to Download mode and ODIN, but err..
Next time you go to recovery
*make sure you have a ROM in your sd card that is safe to flash, even if its chimera*
wipe data/factory reset
mount/storage > format system
flash your ROM in sd, then reboot

Yeah I wasn't expecting it to work. But now that that worked I am a bit nervous about installing a ROM incase the bootloader is corrupted.
Sent from my SGH-T889 using Tapatalk 2

=X= said:
Yeah I wasn't expecting it to work. But now that that worked I am a bit nervous about installing a ROM incase the bootloader is corrupted.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
:l, pretty sure you're confused, and the bootloader is not corrupted. If bootloader was corrupted, your phone would never start without a JTAG again.
Anyways, get into recovery, and flash chimera or any other safe rom you have, and see if it boots up. I think it may be something with Chimera.

xriderx66 said:
:l, pretty sure you're confused
Click to expand...
Click to collapse
Wouldn't be the first time
I'll reinstall the ROM thx
Sent from my SGH-T889 using Tapatalk 2

Just a suggestion, don't re-install Chimera... Or at the very least, don't use it as a daily driver. I stand by that for two reasons. For one, Chimera may have been the reason you got into this problem in the first place. The second reason being... Well... Er... Chimera v2.2 isn't the best ROM out there, and it's kinda dated... I'm sure there's others that would agree. I mean there's plenty of other ICS ROMs available that run much better. Jellybean ROMs have also reached a point of stability, so there's some good Jellybean flavored options to choose from as well. Personally, I'm running ParanoidAndroid (JB) and I'm lovin' it.
Just my two cents... But if you like Chimera, then stick with it. It's definitely a usable ROM.
Sent from my SGH-T959

I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks

=X= said:
I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks
Click to expand...
Click to collapse
Just curious, is your phone working fine now?

=X= said:
I'm not dead set on Chimera, it was the best ROM at the time.
I'll give the ROM you mentioned a try,thanks
Click to expand...
Click to collapse
Awesome. If you're like me -- a big fan of customization -- then I'm sure you'll love ParanoidAndroid (LINK).
Otherwise there are ten other JB ROMs to choose from, and about seventeen different ICS ROMs to choose from (excluding Chimera v2.2). Links to said ROMs can be found in the "ROM" section of the Vibrant Bible thread (LINK).
EDIT: Sorry if I kinda' veered this thread off topic... Have you gotten you're phone running fine now =X=?

xriderx66 said:
Just curious, is your phone working fine now?
Click to expand...
Click to collapse
No it did not work. I thought all was good. It seemed to work when I performed a soft shutdown. Then I tried a cold boot: shutdown the phone, pulled the battery and on startup the phone would not work.
N00B_IN_N33D said:
Awesome. If you're like me -- a big fan of customization -- then I'm sure you'll love ParanoidAndroid (LINK).
Otherwise there are ten other JB ROMs to choose from, and about seventeen different ICS ROMs to choose from (excluding Chimera v2.2). Links to said ROMs can be found in the "ROM" section of the Vibrant Bible thread (LINK).
EDIT: Sorry if I kinda' veered this thread off topic... Have you gotten you're phone running fine now =X=?
Click to expand...
Click to collapse
Awesome thanks for the links. It sounds like paranoid android will for my likes. I'm going to update my phone with that rom.
I'm still having problems with my phone however.

So I've upgraded my phone to the latest ParanoidAndroid but I'm still getting the same problem.
All works fine once it's running but I have to use the USB and three finger boot to get the phone to start, once I'm in the recovery mode selecting her restart launches the OS .
However trying to start the phone from a cold boot does not seem to work...any ideas anyone?
Sent from my SGH-T889 using Tapatalk 2

May be you need a new battery how long you have the current battery.
Sent from my SGH-T959 using xda app-developers app

It's probably not bootloader-related, but for what it's worth, froyo bootloaders don't work well with ICS Roms.
Chances are it's just a ROM issue, but if that fails just ODIN to default, re-root, install GB bootloaders, etc. (Basically, start over)

I have run many ICS and JB ROMs without issue running froyo boots. It was mostly GB ROMs that had issue and needs GB boots. I don't suspect that to be the issue however, it won't hurt to try it.
I am Jack's smirking revenge.

Related

[Q] HELP! My Vibrant won't turn on!

I did all that rooting crap. Now when I press the power putton, it flashes the "Samsung Vibrant" Image, then plays the tmobile tone, but no "S" image appears. And it stays black. How do I fix this?
define "all the rooting crap"? Did you flash a Voodoo Rom and try to flash something else on top of it?
There is NO way to tell you what you need to do unless you tell us what you did.
But based on what you have described.. Gonna say u are SOL.
Use odin to flash stock rom then start over. I have been stuck on that screen a couple times. Lol
Sent from my SGH-T959 using XDA App
Truth be told
Anthony is right. i had this issue earlier this week when trying to flash a mod to my phone. Odin is the only choice at this point.
This has happened to me twice, most recently after "fixing permissions" in the oclf market program. Both times I've rectified by booting into recovery and "reinstall packages". Both times I also removed sim and sd and after a couple repetitions of package reinstall it comes back to life. Maybe dumb luck, maybe not, worked twice...
Sent from my SGH-T959 using XDA App
Correction, fixing permissions in Rom Manager...
Sent from my SGH-T959 using XDA App
Also...My Vibrant Wont Turn On
Dear All
I am new to this forum and need some assistance. I recently bought a T-Mobile Vibrant from a friend who had brought it with him for the US. I am using it in the Middle East where I live at the moment.
I have been reading a lot in the past few weeks about the Vibrant and almost everything there is to know. It seems there is always more to discover.
Back to the issue at hand. I had been having problems with getting my phone to reboot into recovery mode but I finally managed to do so last night. I wanted to flash my phone with Axura 2.1E, Nero V2 or the Macnut v14, so I can use the the Black Froyo theme on it.
First, I flashed the original firmware (T959...JDF) which I got off your site, using Odin v1.3. That worked as it should. Then I proceeded to follow instructions to download the ClockworkMod from this thread: [RECOVERY] ClockworkMod Recovery for Vibrant (FINAL! SAFE!)
After I copied the CWM file to the Internal sd card, I downloaded Rom Manager, rooted the phone with Z4root, chose the Samsung Vibrant in Rom manager and clicked install ROM from sd card. it rebooted into recover mode (blue writting), I clicked 'reinstall packages', which it did and it rebooted into the ROM recovery mode (green writting). I chose the option to install zip file from sd card, then chose Axura 2.1E and it installed until it said complete.
So far everything was working as it should, or at least that was the impression I got. I am not sure of this next step. It said installation complete, so i chose 'go back', then 'reboot device'. When it went into reboot, nothing happened...just a black screen. It wont start, neither normally, not into any other mode (recovery or download). i plugged it into the charger and not even the battery icon would come up. i assume that it is...'dead' and I just did the impossible. I tried several ways and combinations to get it back to life somehow, but I have a feeling that's it.
Any suggestions, advice, remedies, whatever help...even condolences would be much appreciated..
Much appreciated and all the best to all.
Cheers
What the heck is up with all these HARD BRICKs?
Past few days, I keep reading people who have appeared to truely HARD BRICK their phone.
Meaning they can not get into download mode, they can not use odin, they are truely hard bricked.
What is up with the sudden surge of hard bricks.
This guy sounds like he did everything correct.
Scary.
Ya I've seen a lot of those also... could it be a newer version of the Vibrant? Yes he did everything correctly... he could try a jig.. its only maybe 10 bucks? worth a try at least...
My Vibrant wont turn on
Thanks guys for the reply to my post. I was thinking today that even though I did follow instructions correctly, that I might have missed a step at the end.
My thoughts went to the fact that after the installation of my chosen ROM (Axura 2.1E) was complete, I was given the choice of installing update.zip again, along with some other ones which I forgot what they were and the option to 'go back'. I went 'back' and pressed reboot device.
If the installation was fully complete, would not the phone go into automatic reboot?
Anyways seem like the boot is screwed and I am getting help from a friend to get it back to life again.
Anyone can confirm what to do after I install a 'ROM' successfully. Is there another step afterwards which I must be aware of to fully complete the flash?
Cheers again
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
Get into download mode try again,
if not try getting the files from a different source
Sent from my SGH-T959 using XDA App
Sent from my SGH-T959 using XDA App
Hey everyone...
I need help.. And its not my phone nor do i have it in my possession... Kinda troubleshooting over the phone... My nephew got a samsung vibrant... Got his phone rooted and had Darky's v7.7 Gingerbread Edition rom running... It booted up ran for a bit had a LOGSPROVIDER error stopped unexeptedly message....
He shut the phone off then rebooted and it wont boot past the first boot screen... HE also cant get into recovery but download mode works fine..
Possible solutions..?
Well if he can get into download mode the he should just odin back to stock and reinstall the rom!
Sent from my SGH-T959 using XDA App
Thats what I was thinking... Im not familiar with samsung phones.. Whats the purpose of download mode?
Safety feature? I presume..
I find it odd though that it booted fine and was ok until he rebooted and it wouldnt load... Any specific reason that could happen
Nah if you read the disclaimers devs put up it clearly says "i am not responsible for bricking, etc."
So no, there should be no specific reason why your nephews phone won't boot, more unless he was running a lag fix and flashed the wrong zip or whatever then yeah...
But download mode is I guess a fail-safe for samsung if the phone bricks or anything, afterall the vibrant is nearly impossible to fully brick
Sent from my SGH-T959 using XDA App
Thank You for the help...
He opted to call tmo and there sending a replacement.. Then asked him if he bricked the phone... He played dumb.. and said he rebooted the phone and it wouldnt load...
And yes i know about the devs disclosure... Got myself a mytouch slide which just finally got s-off courtesy of ALPHAREV woohoo.. Also have a G1 from back when it first came out.. SO i got plenty of rom downloading under my belt
hellobitchdog said:
Hey I got a old stock rom from off one of these forms off xda... for my samsung vibrant... After i flash the rom odin said reset and the vibrant never turned on.... its been like this for a day now... the battery sign dosent even turn on... what can i do..
Click to expand...
Click to collapse
This same thing happened to me. I read about making a jig, yeah right. So I continued for the better part of three hours plugged into my computer with data cable continuing the same motion that I would to get into download mode. And finally I got the download dude. I used the s1.odin somthing .pit file I think it was the first .pit to come out. Not the 512.pit Along with the first .jar. Anyway keep trying to get into download mode even with a black screen, can be done.
Sent from my SGH-T959 using XDA App

Hard bricked during CM9 upgrade from UCLD3 Leak?!

Well, my phone is non responsive to anything I do and I am unable to get into download mode. I rooted the phone using this guide from creepyncrawley (http://forum.xda-developers.com/showthread.php?t=1311081).
For a complete device history:
I later installed a nightly of CM9. Everything worked great for the most part with the various nightly builds. I changed to the UCLD3 leak for awhile without hitch.
I needed something off of my stock rooted rom from the thread above so I did a restore...again no problems with the switch. I did have to fix permissions to open some apps.
I switched back to the UCLD3 leak to test data speeds with plans on switch to the new CM 9 nighlty. I booted into recovery and wiped data, cache, and dalvik. I went to install the CM 9 4/17 rom and it checked the rom and started the install. The progress bar never moved at all and after awhile the screen/phone turned off. Since then, the phone is completely unresponsive. I am unable to get into download mode, the cap lights do not turn on...nothing.
What happened...I have no clue. Is there any way I can fix this with the tools here?
avus_m3 said:
Well, my phone is non responsive to anything I do and I am unable to get into download mode. I rooted the phone using this guide from creepyncrawley (http://forum.xda-developers.com/showthread.php?t=1311081).
For a complete device history:
I later installed a nightly of CM9. Everything worked great for the most part with the various nightly builds. I changed to the UCLD3 leak for awhile without hitch.
I needed something off of my stock rooted rom from the thread above so I did a restore...again no problems with the switch. I did have to fix permissions to open some apps.
I switched back to the UCLD3 leak to test data speeds with plans on switch to the new CM 9 nighlty. I booted into recovery and wiped data, cache, and dalvik. I went to install the CM 9 4/17 rom and it checked the rom and started the install. The progress bar never moved at all and after awhile the screen/phone turned off. Since then, the phone is completely unresponsive. I am unable to get into download mode, the cap lights do not turn on...nothing.
What happened...I have no clue. Is there any way I can fix this with the tools here?
Click to expand...
Click to collapse
This might be a stupid question, but... Dead battery?
Sent from my SGH-I777 using Tapatalk 2 Beta-6
avus_m3 said:
Well, my phone is non responsive to anything I do and I am unable to get into download mode. I rooted the phone using this guide from creepyncrawley (http://forum.xda-developers.com/showthread.php?t=1311081).
For a complete device history:
I later installed a nightly of CM9. Everything worked great for the most part with the various nightly builds. I changed to the UCLD3 leak for awhile without hitch.
I needed something off of my stock rooted rom from the thread above so I did a restore...again no problems with the switch. I did have to fix permissions to open some apps.
I switched back to the UCLD3 leak to test data speeds with plans on switch to the new CM 9 nighlty. I booted into recovery and wiped data, cache, and dalvik. I went to install the CM 9 4/17 rom and it checked the rom and started the install. The progress bar never moved at all and after awhile the screen/phone turned off. Since then, the phone is completely unresponsive. I am unable to get into download mode, the cap lights do not turn on...nothing.
What happened...I have no clue. Is there any way I can fix this with the tools here?
Click to expand...
Click to collapse
You may want to try a jig, if you haven't updated the bootloaders.
Were you switching between these using nandroid backups?
dandrumheller said:
This might be a stupid question, but... Dead battery?
Sent from my SGH-I777 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Phone has been plugged in the charger for awhile now...nothing.
AJ Newkirk said:
You may want to try a jig, if you haven't updated the bootloaders.
Were you switching between these using nandroid backups?
Click to expand...
Click to collapse
I only used a nandroid backup for restoring back to the stock rom. For everything else, I used CWM and a zip install.
I'd try pulling the battery and leaving it out for 10-15 mins.
I find it hard to believe that you would brick your phone using a known good .zip file in CWM.
The bootloaders should be intact - so it should be recoverable.
Something else is at play here. Either it is hard locked-up or you have a hardware issue.
I'd also suspect battery or hardware.
Try to get into download mode with the battery out. Use the same sequence, vol+ and vol- then plug in the usb cable. The usb will supply the power. If it won't go into download mode that way then I would suspect hardware rather than battery.
Did you flash ld3 using the one click odin or thru a cwm file?
If a jig doesn't work than the bootloader is most likely corrupted.
10 char this
AJ Newkirk said:
I'd try pulling the battery and leaving it out for 10-15 mins.
I find it hard to believe that you would brick your phone using a known good .zip file in CWM.
The bootloaders should be intact - so it should be recoverable.
Something else is at play here. Either it is hard locked-up or you have a hardware issue.
Click to expand...
Click to collapse
That's what I thought. Like I said, it started the flash but then look like it hung. The progress bar did not move at all. After a bit the phone turned off. What is hard locked-up? I do remember when I first plugged the charger in after the phone died/suspended it did vibrate.
creepyncrawly said:
I'd also suspect battery or hardware.
Try to get into download mode with the battery out. Use the same sequence, vol+ and vol- then plug in the usb cable. The usb will supply the power. If it won't go into download mode that way then I would suspect hardware rather than battery.
Click to expand...
Click to collapse
Phone is basically new. I tried leaving the battery out and holding down the vol keys and plugging into USB. Screen does nothing.
c0ldburn3r said:
Did you flash ld3 using the one click odin or thru a cwm file?
If a jig doesn't work than the bootloader is most likely corrupted.
10 char this
Click to expand...
Click to collapse
As I posted above I only used Odin from the original rooting. Everything else was CWM.
I guess I need to find out how to make a jig and try that as my only remaining option??
Same thing happened to me earlier today when flashing the latest MIUI V4 from UCLD3 in CWM. It flashed without any errors, but upon hitting reboot the device shut off and would not respond to anything. Tried leaving battery out for an hour, tried USB jig, and several other tricks to try to boot into download. Sent the phone off to Mobile Tech Videos for repair
avus_m3 I think your bootloader is corrupt just like mine.... but how?!?
w1209 said:
Same thing happened to me earlier today when flashing the latest MIUI V4 from UCLD3 in CWM. It flashed without any errors, but upon hitting reboot the device shut off and would not respond to anything. Tried leaving battery out for an hour, tried USB jig, and several other tricks to try to boot into download. Sent the phone off to Mobile Tech Videos for repair
avus_m3 I think your bootloader is corrupt just like mine.... but how?!?
Click to expand...
Click to collapse
That's not what I want to hear
I just don't understand how this can happen. Even if lets say worse case scenario the rom is screwed, my battery dies during the update or whatever...I should still be able to get into CWM or at least download mode right?
It's very odd indeed considering MIUI doesn't have a bootloader included either, and according to CWM it flashed without any problems. The only other possibility I could think of is that the ROM got corrupted while copying onto the phone. I checked MD5 checksum after downloading onto my computer but not on my phone before flashing. Still, could a corrupt ROM without bootloader hardbrick the phone? I thought the SGS2 was supposed to be very hard to brick when not flashing something like a bootloader
If the boot loaders and param.lfs are intact you should be able to get download mode (as long as there are no hardware problems).
Recovery on the other hand is in the kernel on our phones so if the kernel did not flash properly it could cause recovery not to work.
I have read somewhere a while back where someone had their battery die during a flash and they had to get different battery altogether to get the phones to power back on - don't know if that is the case here. It was as though their battery would not charge in their phone after it died during the flash. But if you guys know someone close to you that have the same phone I would try their battery just to see. There could be some other hardware malfunction also.
I don't know if cwm recovery touches any of the boot loaders or the param.lfs in the nandroid backup/restore process. As far as flashing a cwm zip one needs to check the zip to make sure the zip dies not contain boot loaders or param.lfs - as long as the zip being flashed does not contain those then it should be pretty safe to flash.
Sent from my SGH-I777 using XDA Premium HD app
If a USB jig doesn't work, I guess call up Samsung and play dumb? Worst thing that will happen is they'll send your phone back to you. Sorry to hear about your bad luck :/
Here's an odd idea... you didn't happen to get water in it, did you?
I hard brick too! I can't get jig to work at all and can't connect to download mode. I was at ~40% battery and flashed AOKP coming from ld3. I hit reboot in recovery and the screen went black.
If I can't get it working tonight I going to AT&T in the morning
---------- Post added at 11:19 PM ---------- Previous post was at 11:16 PM ----------
dayv said:
If the boot loaders and param.lfs are intact you should be able to get download mode (as long as there are no hardware problems).
Recovery on the other hand is in the kernel on our phones so if the kernel did not flash properly it could cause recovery not to work.
I have read somewhere a while back where someone had their battery die during a flash and they had to get different battery altogether to get the phones to power back on - don't know if that is the case here. It was as though their battery would not charge in their phone after it died during the flash. But if you guys know someone close to you that have the same phone I would try their battery just to see. There could be some other hardware malfunction also.
I don't know if cwm recovery touches any of the boot loaders or the param.lfs in the nandroid backup/restore process. As far as flashing a cwm zip one needs to check the zip to make sure the zip dies not contain boot loaders or param.lfs - as long as the zip being flashed does not contain those then it should be pretty safe to flash.
Sent from my SGH-I777 using XDA Premium HD app
Click to expand...
Click to collapse
Using the odin one-click I tried to flash using Mobile ODIN, it only flashed the param.lfs (this was before the helpful instructions from entropy on how to extract properly). Don't know if that has any effect on my problem.
nakedninja42 said:
I hard brick too! I can't get jig to work at all and can't connect to download mode. I was at ~40% battery and flashed AOKP coming from ld3. I hit reboot in recovery and the screen went black.
If I can't get it working tonight I going to AT&T in the morning
---------- Post added at 11:19 PM ---------- Previous post was at 11:16 PM ----------
Using the odin one-click I tried to flash using Mobile ODIN, it only flashed the param.lfs (this was before the helpful instructions from entropy on how to extract properly). Don't know if that has any effect on my problem.
Click to expand...
Click to collapse
Not sure, but if your param.lfs got corrupted that could be your problem.
Sent from my SGH-I777 using XDA Premium HD app
Same exact thing happened to me as dayv, except I was flashing to MIUI. Coincidence between the three of us that we were flashing FROM LD3 or not? Sorry to hear about your phone as well. Lesson learned is to wait for other to flash before you?
w1209 said:
Same exact thing happened to me as dayv, except I was flashing to MIUI. Coincidence between the three of us that we were flashing FROM LD3 or not? Sorry to hear about your phone as well. Lesson learned is to wait for other to flash before you?
Click to expand...
Click to collapse
Yes....coincidence. I have flashed form UCLD3 to AOKP (and CM9) & back more than a few times without issue.
@avus_m3, w1209, and nakedninja42:
With three similar hard bricks, there is a patern. We should gather as much information as possible. What package did you use to put UCLD3 on the phone immediately before the bad flash? Also, exactly what parts did the AOKP or MIUI package that resulted in the bad flash contain?
I used the latest version posted in the thread (I think there is only one LD3 package?): hxxp://goo.im/devs/task650/SGH-I777/Task650_I777_UCLD3_signed.zip
(not allowed to post links yet)
Same for MIUI: hxxp://goo.im/devs/ktoonsez/downloads/miuiandroid_I777-2.4.13b.zip
(not allowed to post links yet)
I know for sure that the MIUI MD5 checksum matched after downloading to my computer. Will see what the MD5 checksum is of the file on my phone after I get it back from MTV. If it is the same there is a definite pattern. If not it was just bad luck and my fault for not verifying it on phone before flashing
w1209 said:
Same exact thing happened to me as dayv, except I was flashing to MIUI. Coincidence between the three of us that we were flashing FROM LD3 or not? Sorry to hear about your phone as well. Lesson learned is to wait for other to flash before you?
Click to expand...
Click to collapse
Just to be clear this did not happen to me directly - just responded as I remember reading somewhere about a battery dying during a flash and that person needing to get another battery to get their phone back to life - again the battery may not have anything to do with what happened hear.
But it does look like this happened to two people after flashing away from ld3 leak - though it just may be coincidental hardware issues. we will see if there are more people who have trouble after flashing the leak.
Sent from my SGH-I777 using XDA Premium HD app

[Q] Reset to fully stock

So i purchased an atrix 4g off of eBay, and it has a few Root applications on it, but isn't actually rooted.
The android recovery mode is also broken, i get an android robot with the Attention symbol. Would post a link to one i found on the internet but i cannot since i am under 8 posts.
The phone was on 2.3.6 build # 4.5.141 when i received it. and i have done nothing to it so far.
So maybe someone applied OTA updates and killed the root or something, idk.
in the end the end i would like to root it with some ISC.
So is there anyway i can Reset everything to stock out of the box. Or to fix the problems with recovery?
Also for now it wont really be used as a phone, as i don't have a sim yet.
To cover the basics here let's make sure the phone isn't bootloader unlocked or rooted. To check bootloader, when you boot the phone, does the moto screen say "Unlocked" in top left hand corner of the screen? If not, it isn't. Then for root, check it with the app root checker basic or pro from market. Get back to the thread once you can answer those questions and then I will post something to help you with the getting ics.
Sent from my Atrix with XDA Premium
Both of those come up as a no So no unlocked boot loader and no root
Try this but you know the risks of messing with the phone right??? Read EVERYTHING before you do. Your phone says a different version of firmware than the thread but if you look back in the posts of the thread in the end, it will work. You can also read the Atrix thread stickies.
Edit.... having trouble posting link ... give me sec.
Edit 2....can't post from phone. Let me post it from my computer when I get to the computer in the morning.
Sent from my Atrix with XDA Premium
Is this the link you wanted to post?
http://forum.xda-developers.com/showthread.php?t=1182871
If so i cant go through with it because my "Android Recovery" menu is broken.
Ahh now i see, i was selecting the wrong option stupid me
Ok now i have my bootloader unlocked CMW installed, wouldn't boot into android just sat there on M dual core screen for a long time. Ok tries to install another rom
MIUI but that has the same problem gets stuck at That Screen, i can still get into recovery, and everything.
Now what?
dfanz0r said:
Ok now i have my bootloader unlocked CMW installed, wouldn't boot into android just sat there on M dual core screen for a long time. Ok tries to install another rom
MIUI but that has the same problem gets stuck at That Screen, i can still get into recovery, and everything.
Now what?
Click to expand...
Click to collapse
Did you wipe before installing?
Sent from my MB860 running Jokersax's CM9
Yes i wiped
dfanz0r said:
Yes i wiped
Click to expand...
Click to collapse
Try cm9. Here's the order you should do it in:
1. Full wipe
2. Flash 0.6
3. Flash 0.6 again
4. Flash gapps
Sent from my MB860 running Jokersax's CM9
dfanz0r said:
Is this the link you wanted to post?
http://forum.xda-developers.com/showthread.php?t=1182871
If so i cant go through with it because my "Android Recovery" menu is broken.
Ahh now i see, i was selecting the wrong option stupid me
Click to expand...
Click to collapse
Yup that was it.
Glad you found it.
Sent from my Atrix with XDA Premium
giqbal said:
Try cm9. Here's the order you should do it in:
1. Full wipe
2. Flash 0.6
3. Flash 0.6 again
4. Flash gapps
Sent from my MB860 running Jokersax's CM9
Click to expand...
Click to collapse
This doesn't work either same result
Does anyone else have any ideas?
dfanz0r said:
Does anyone else have any ideas?
Click to expand...
Click to collapse
Have you flashed a different ROM for the time being to at least have a working phone? Like a blur or cm7 ROM?
Sent from my Atrix with XDA Premium
Thats is what i was going to try next, i havent got to it today.
Are you flashing plugged in? Try flashing the rom without having your phone plugged in.
Also, if you're at the M logo screen, I suggest waiting it out for quite a while. Be patient. I used to think when I flashed roms that I was stuck at M logo, but I just wasn't waiting long enough, especially coming from a full wipe.
Otherwise, try doing a battery pull and then putting it back in and booting it up.
You can also try using Nottachtrix with the installer? I've heard that fixes a lot of people's problems that are getting stuck at logo screen.
well right now it seems that the battery is dead and wont charge....
So im not sure what im gonna do about that
Ok so im installing NottachTrix now will report how it went when done.
Also about leaving it on to boot, i did that for 24 hours, nothing happened
Edit:
It seems to be working so far. The phone is stuck at a charging screen with a battery icon, much more than it was before.
dfanz0r said:
Ok so im installing NottachTrix now will report how it went when done.
Also about leaving it on to boot, i did that for 24 hours, nothing happened
Edit:
It seems to be working so far. The phone is stuck at a charging screen with a battery icon, much more than it was before.
Click to expand...
Click to collapse
Wipe cache partition, wipe data, wipe delvik. Install Rom (cm7). Reboot recovery. Install gapps. Reboot now. If it's not working perhaps you cwm is outdated?
Sent from my MB860 using xda premium
NottachTrix works fine so far, my battery just needed to charge some.

[Q] Bricked I777

Tried to flash Cm9 and now can not turn on or go into recovery or go into download. Looks like I totally bricked I777. Any suggestions or help.
Please.
More information please
Sent from my SGH-I777 using Tapatalk 2
Tried flash CM9 then Gapps then ucld4 modem .After that phone get stuck on update modem. After that I could turn it off and now can not do anything. I have Samsung Galaxy S2 from ATT. Thank you
Pookh007 said:
Tried flash CM9 then Gapps then ucld4 modem .After that phone get stuck on update modem. After that I could turn it off and now can not do anything. I have Samsung Galaxy S2 from ATT. Thank you
Click to expand...
Click to collapse
Did you reboot in between flashing stuff?
Sent from my SGH-I777 using Tapatalk 2
No
Pookh007 said:
No
Click to expand...
Click to collapse
Well there you go, it's well known that you have to reboot in between flashing stuff
Sent from my SGH-I777 using Tapatalk 2
what can i do right now?
Pookh007 said:
what can i do right now?
Click to expand...
Click to collapse
If it won't go into download or recovery try getting a jig otherwise I have no clue
Sent from my SGH-I777 using Tapatalk 2
Thank you for your help. Already ordered jig . Let you know when I try
Why aren't u posting this in the cm thread ?
Sent from my SGH-I777 using Tapatalk 2
Hey, instead of creating another thread, I'll just post in here.
My SGH-i777 was working fine, I downloaded the latest Update CM9 Nightlies 2012-06-09 directly from CM's download site. I was previously running CM9 Nightlies 2012-06-03.
I put the Update in the root of the internal SD memory. I started up ROManager, and selected the "Flash ROM Update" option. The Phone shut off, as normal, so it can go into Recovery Mode and Flash the Update automatically.
The phone never got into the Recovery Menu! I waited for about 5 mins, but nothing was booting up on the screen.
So I removed the battery and inserted it back in to turn it back on. It shows the Galaxy SII Splash Screen and then the screen turns off, and it just keeps flickering on and off. You cant see the flickering unless your in a dark room, in the daylight you won't notice it, because the backlight turns on for a split second and its really faint.
So I ruled out that its not that the battery has died, because before I started up ROManager the battery was full.
Anyways, can you guys help me? Thanks in advance!
leo9891 said:
Hey, instead of creating another thread, I'll just post in here.
My SGH-i777 was working fine, I downloaded the latest Update CM9 Nightlies 2012-06-09 directly from CM's download site. I was previously running CM9 Nightlies 2012-06-03.
I put the Update in the root of the internal SD memory. I started up ROManager, and selected the "Flash ROM Update" option. The Phone shut off, as normal, so it can go into Recovery Mode and Flash the Update automatically.
The phone never got into the Recovery Menu! I waited for about 5 mins, but nothing was booting up on the screen.
So I removed the battery and inserted it back in to turn it back on. It shows the Galaxy SII Splash Screen and then the screen turns off, and it just keeps flickering on and off. You cant see the flickering unless your in a dark room, in the daylight you won't notice it, because the backlight turns on for a split second and its really faint.
So I ruled out that its not that the battery has died, because before I started up ROManager the battery was full.
Anyways, can you guys help me? Thanks in advance!
Click to expand...
Click to collapse
You obviously read nothing before trying to flash otherwise you would have known not to use rom manager unless you're on CM9 already
Edit : okay you were already on CM9 but you still should stay away from rom manager, it's not known for being reliable
Sent from my SGH-I777 using Tapatalk 2
What kernel were u using prior to trying to update and did u flash the correct version of Rom manager? I know last time ilooked there were multiple options for the i777.
Sent from my SGH-I777 using Tapatalk 2
Nick281051 said:
You obviously read nothing before trying to flash otherwise you would have known not to use rom manager unless you're on CM9 already
Edit : okay you were already on CM9 but you still should stay away from rom manager, it's not known for being reliable
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
If it's not reliable, why does CM9 come with it installed on its ROMs?
And I've used it a few times before and never had a problem with it. Also like I said, if it's so unreliable, I'm sure the devs over at CM would have taken it out of their ROMs...
Phalanx7621 said:
What kernel were u using prior to trying to update and did u flash the correct version of Rom manager? I know last time ilooked there were multiple options for the i777.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I was using the Siyah Kernel made for the SGH-i777. And the latest version of Rom Manager.
Edit: The thing im confused about is I didn't flash anything yet and it just stopped working. I would understand that if I flashed something and in the middle of flashing it stopped working then that's completely different.
leo9891 said:
If it's not reliable, why does CM9 come with it installed on its ROMs?
And I've used it a few times before and never had a problem with it. Also like I said, if it's so unreliable, I'm sure the devs over at CM would have taken it out of their ROMs...
I was using the Siyah Kernel made for the SGH-i777. And the latest version of Rom Manager.
Edit: The thing im confused about is I didn't flash anything yet and it just stopped working. I would understand that if I flashed something and in the middle of flashing it stopped working then that's completely different.
Click to expand...
Click to collapse
There you go, you have to use CM9 kernel you can't use siyah as I remember it
Sent from my SGH-I777 using Tapatalk 2
I've always had problems trying to flash from ROM Manager. Always boot into CWM manually when flashing. If you can't get it into download mode and see it in Odin, you may be screwed. There's a another way to get into download mode...something like removing the battery, connect to PC via USB cable, then hold volume buttons down while inserting the battery...or something. I searched and couldn't find it again.
Sent from my SGH-I777 using XDA
Big is right . Best to boot into cwm manually, I've had problems with using Rom manager to do it as well, the few times I've used it. Also, Im 99% sure Rom manager comes built into cm itself, as a system app for all cm releases. So i don't think they stick it in there for just our device or anything. But i could be wrong.
Sent from my SGH-I777 using Tapatalk 2
Nick281051 said:
There you go, you have to use CM9 kernel you can't use siyah as I remember it
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I've updated from Update-CM9-Nightlies-2012-06-03 to Update-CM9-Nightlies-2012-06-05 before and went smooth. Anyways, I guess ROM Manager might be unstable. That sucks for me!
big_boludo said:
I've always had problems trying to flash from ROM Manager. Always boot into CWM manually when flashing. If you can't get it into download mode and see it in Odin, you may be screwed. There's a another way to get into download mode...something like removing the battery, connect to PC via USB cable, then hold volume buttons down while inserting the battery...or something. I searched and couldn't find it again.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Phalanx7621 said:
Big is right . Best to boot into cwm manually, I've had problems with using Rom manager to do it as well, the few times I've used it. Also, Im 99% sure Rom manager comes built into cm itself, as a system app for all cm releases. So i don't think they stick it in there for just our device or anything. But i could be wrong.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I can't get into Download Mode or Recovery Mode. Like I said I didn't even get a chance to try and Flash anything, I was about to backup my current ROM and while RM was booting into Recovery Mode, its like it just froze on a black screen.
IDK if its a Hardware Problem or my Mother Board got fried somehow cause the screen turns on and shows "Samsung Galaxy SII" and then it just turns off. And in the daylight it looks like the phone is off, but if your in a dark room, you can see the screen's backlight flickering on and off.
Do you guys think that USB Jig will work?
Thanks guys for you help!
EDIT: BTW, I'm now stuck using a crappy WP7! It was my step-sons, LOL. It is like a watered down smart phone... I don't even think it deserves the title "Smart Phone".
Pull the battery and leave it out. Then go into download mode the usual way by holding the two volume buttons and plugging in the USB cable. The phone wil go into download mode with power supplied by the cable. If this fails, then there is definitely some serious problem, and hardware can not be ruled out as a possible cause.
creepyncrawly said:
Pull the battery and leave it out. Then go into download mode the usual way by holding the two volume buttons and plugging in the USB cable. The phone wil go into download mode with power supplied by the cable. If this fails, then there is definitely some serious problem, and hardware can not be ruled out as a possible cause.
Click to expand...
Click to collapse
Thanks!!!!! Your a life saver! I plugged it into the phone charger and held the Vol. Down Button and it was able to boot into Download Mode and the screen did not shut off like it has been on every boot up I've tried!
Right bow I'm charging it so I can plug it into my laptop and restore my phone later tonight after work.
This is my first Android and even though it kinda crapped out on me, I still love it better than the iPhone.
Thanks again!

boot looping for no reason, any help?

My SGS2 has been running AOKP for a few months now, all of a sudden today the phone keeps rebooting itself every few minutes. I have tried wiping cache, full wipe etc.... I tried installing a different kernel and also a different rom, now it's on ShoStock, but it continues to loop. Also I have flashed the newest version of CWM but everytime I reboot the phone it reverts back to the old version. Any ideas help?
Still Mostly Harmless said:
My SGS2 has been running AOKP for a few months now, all of a sudden today the phone keeps rebooting itself every few minutes. I have tried wiping cache, full wipe etc.... I tried installing a different kernel and also a different rom, now it's on ShoStock, but it continues to loop. Also I have flashed the newest version of CWM but everytime I reboot the phone it reverts back to the old version. Any ideas help?
Click to expand...
Click to collapse
How do you flash CWM?
I got no clue on the issue at hand other than to go back to stock and see if it persists, if it does its hardware.
Is your name a throwback to the movies/books or something else? In hoping something else...
Good luck bro!
Clay
Team Pirate
Sent from my PINK GS2 using xda app
Thanks guys, another issue I noticed is that the power button was acting really strangely. When you pressed it it wouldnt turn off the phone it would just bring up the restart menu or it wouldn't register at all, so I thought I had a hardware issue. Any finally I ran this kernel cleaner:
http://forum.xda-developers.com/showthread.php?t=1363738
did a full wipe etc...installed rom and then kernel and that has seem to do the trick. Going to hope that it continues to work and I don't have to go out and buy a new phone!
Looks like I have some donating to do.
Don't use ROM manager to flash cwm. As that is what it sounds like u did when u said u "flashed" cwm. Our kernels have recovery built in.
Sent from my SGH-I777 using Tapatalk 2
Phalanx7621 said:
Don't use ROM manager to flash cwm. As that is what it sounds like u did when u said u "flashed" cwm. Our kernels have recovery built in.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Thats what I was thinking :highfive:
I download the latest CWM (6.0.1.0), put the zip on my SD then boot into recovery and installed it as a zip, is that incorrect?
Still Mostly Harmless said:
I download the latest CWM (6.0.1.0), put the zip on my SD then boot into recovery and installed it as a zip, is that incorrect?
Click to expand...
Click to collapse
Yeah, that's probably incorrect.
For our phones, CWM is included in all custom kernels and isn't separate from the kernel at all. The only way to update CWM is to flash an updated custom kernel, like if Siyah or NEAK were to update for instance.
Don't bother trying to update CWM all the time, there's honestly little to no benefit from even trying and you'll likely end up with problems instead like you did this time. The version of CWM included with the custom kernels available is more than sufficient, just stick with those instead of trying to update it separately.
So I thought I fixed it but at last I haven't. After running the kernel cleaner, installing different roms/kernels the phone still boots for no reason after a while, not as often but at least 2-5 times a day. I am have no idea what's going on.
Still Mostly Harmless said:
So I thought I fixed it but at last I haven't. After running the kernel cleaner, installing different roms/kernels the phone still boots for no reason after a while, not as often but at least 2-5 times a day. I am have no idea what's going on.
Click to expand...
Click to collapse
You tried going to stock and seeing if the problem persists? For my brother it was an app so keep that in mind as well
clay101eve said:
Is your name a throwback to the movies/books or something else? In hoping something else...
Good luck bro!
Clay
Team Pirate
Sent from my PINK GS2 using xda app
Click to expand...
Click to collapse
still awaiting an answer!
Have you noticed if the phone is getting really hot around the time it's rebooting?
Clay
Team Pirate
Sent from my PINK SGH-I777
clay101eve said:
still awaiting an answer!
Have you noticed if the phone is getting really hot around the time it's rebooting?
Clay
Team Pirate
Sent from my PINK SGH-I777
Click to expand...
Click to collapse
Yes it is definitely from my favorite series of books. This is one of the only forums I visit that I couldn't get just Mostly Harmless.
Doesn't really get hot, but after a while the power button stops responding and only time fixes this or a fresh install of a kernel. I formatted my SD card and the internal memory (without grabbing my pictures ) and any app I install is new from the market.

Categories

Resources