I tried using my Logitech F310 controller via OTG Micro USB but I don't think the phone detected the controller. The "mode" light on the controller didn't light up.
I have sixaxis controller apps installed, as well as root Stickmount apps installed.
I could mount a USB pendrive, a mouse, keyboard, all without any problems.
I'm running on stock rom with leankernel 6.1.
liang028 said:
I tried using my Logitech F310 controller via OTG Micro USB but I don't think the phone detected the controller. The "mode" light on the controller didn't light up.
I have sixaxis controller apps installed, as well as root Stickmount apps installed.
I could mount a USB pendrive, a mouse, keyboard, all without any problems.
I'm running on stock rom with leankernel 6.1.
Click to expand...
Click to collapse
This might be an extremely late response because I just found this post through Google. Have you tried switching the little switch on the bottom to the XInput setting?
Related
Is it possible to use a usb device without a dock using the usb cord that comes with the tf201?
Nope, but you can get one of these.
Does it have full USB functions (keyboard connectivity and USB storage connectivity) ?
I have that and although I have not connected a keyboard I have gotten it to work wit a ps3 controller and a memmory card reader.
Sent from my PG86100 using XDA
stefankorun said:
Does it have full USB functions (keyboard connectivity and USB storage connectivity) ?
Click to expand...
Click to collapse
I have used a thumbdrive, harddrive, usb receiver for logitec mouse and keyboard, usb wifi adapter (had to the compile drivers)... I imagine anything with a proper driver would work..
So I have the prime and a ps3 controller and i changed the controller mac address to the primes and i can get it to connect using the sixaxis app but when i open up and emulator and try to configure the controls it registers one of the joysticks and the dpad as the same and wont even register the other joystick, did i do something wrong? also USB/BT Joystick Center wont even detect the controller, and I dont have the usb adapter or keyboard. It sees the right joystick and dpad as the same and wont detect the left analog stick movement besides pressing L3
scottrod said:
So I have the prime and a ps3 controller and i changed the controller mac address to the primes and i can get it to connect using the sixaxis app but when i open up and emulator and try to configure the controls it registers one of the joysticks and the dpad as the same and wont even register the other joystick, did i do something wrong? also USB/BT Joystick Center wont even detect the controller, and I dont have the usb adapter or keyboard. It sees the right joystick and dpad as the same and wont detect the left analog stick movement besides pressing L3
Click to expand...
Click to collapse
Just to let you know the ps3 controller works on the prime without any root or sixaxis app. Just turn on BT on the prime, plug in the ps3 controller through usb port and turn on the Ps3 controller. Wait a few secs so it can pair, unplug and your up and running without any cables. Been using mine with bluetooth without any problems.
hungrybear said:
Just to let you know the ps3 controller works on the prime without any root or sixaxis app. Just turn on BT on the prime, plug in the ps3 controller through usb port and turn on the Ps3 controller. Wait a few secs so it can pair, unplug and your up and running without any cables. Been using mine with bluetooth without any problems.
Click to expand...
Click to collapse
I don't have the usb adapter :/
bump still got no solution without USB adapter!
In your emulators settings (I use nesoid, snesoid etc) did you go into Other Settings> and check "Use Input Method" ? It says enable special input device eg bluetooth gamepad.
I have the same issue and I have the paid version and after. 21 update it doesn't work which really pisses me off... .21 update worst update so far? Fair to say?
http://www.amazon.com/USB-Gender-Changer-Female-To/dp/B000BSN4UY
Would this solve your problem? I haven't gotten mine yet but for that price it's worth a shot with the stock USB cable. I have the dock so my PS3 controller plugged right up.
no its been proven that that wont work, the usb charging cable doesnt have the correct pins for usb inputs, only the usb adapter does
scottrod said:
no its been proven that that wont work, the usb charging cable doesnt have the correct pins for usb inputs, only the usb adapter does
Click to expand...
Click to collapse
;(
I wasted a whole $1.15!
NeoMagus said:
In your emulators settings (I use nesoid, snesoid etc) did you go into Other Settings> and check "Use Input Method" ? It says enable special input device eg bluetooth gamepad.
Click to expand...
Click to collapse
scottrod, did you check this setting?
I've noticed that USB OTG isn't as complete as it used to be since KitKat update..
I can still use usb keyboards however all my controllers have stopped working.
Previously I was able to use ps1/2 controllers via usb adapter and now I can't!
Wired 360 controllers don't work either..
Anyone know of a work around?
I tried connecting a pendrive, a mouse and a keyboard through an OTG adapter and they all worked fine.
However, I couldn't get my wired xbox 360 controller to work. The device doesn't show any sign that it's trying to detect it.
I also tried connecting a usb SNES-ripoff controller that I had laying around and it actually worked right away, but half of the buttons on it wouldn't get registered on any emulator I tried.
Has anyone managed to properly connect a wired xbox controller to their Redmi Note 2?
i tried to connecting the wireless one (im not have the wired version), and tried this tutorial, and can't get it work. I think its because original kernel not support it, its lack of xpad.ko module.
and im sure the wired one can't work too, because there was not key layout for xbox controller in /system/usr/keylayout/. yeah we can copy it manual, but our kernel not support.
CMIIWsorry for bad english.
Welcome, i need to connect mouse via usb, or game pad, i got that adapter otg, but nothing works, no mather what mouse.
Is there a ROM with OTG on kernel or some drivers or tricks?
Like i mentioned in the other thread, maybe, if you attach the mouse to an active hub. Unlike the drivers for usb OTG, those for mouse and keyboard could already be present in the rom or keyboard app. And you need mains for this, not really a portable solution.