How to Unbrick/Flash
Official Firmware on
Samsung Galaxy Ace
S5830i Using Odin
First You Need
Latest Version of ODIN [ TRY TO GOOGLE IT]
Bricked Samsung Galaxy Ace S5830I
USB Cable
YOU CAN DOWNLOAD YOUR COUNTRY FRIMWARE HEAR
http://samsung-updates.com/device/?id=GT-S5830i
Samsung Galaxy Ace S5830i is one
of the most popular and best-selling
low-end Android smartphones with
nice features. The phone was
released with Android 2.2 (Froyo)
and was later upgraded to version
2.3.6 Gingerbread. Modest specs of
the this handset make it unqualified
to be updated to Ice Cream
Sandwich or Jelly Bean but there are
qualified and skilled developers out
there who have successfully, but not
buglessly, developed custom ROMs
and mods to give you some ICS and
JB flavor.
If you have recently tried a custom
ROM and now want to go back to
original Gingerbread ROM, you can
install it manually. Sometimes the
device does not start properly
because it is caught in a bootloop
and you can only see the Samsung
logo with your device name. In such
a situation, installing the official
ROM is the best solution.
Getting Prepared
Download appropriate firmware
file from above and extract the
zip to your desktop computer.
Download Odin3 1.84 tool for
multi-file installation (extract
zip): Odin_with_pit_S5830I.zip
Download Odin3 v3.07 for
single file installation (extract
zip): Odin3-v3.07.zip
Download and install Samsung
USB Drivers on your PC:
Download
Charge your phone and backup
all essential data such as
contacts, messages, apps using
These Free Apps .
Open phone Settings>
Applications> Development
and enable USB Debugging.
Installing Stock Gingerbread
Firmware
Turn off you phone and boot it into
Download mode: hold down
the Volume Down + Volume
Up buttons, then long press
the Power key till the your phone’s
screen turns up and you see the
Download mode screen. Now follow
the steps that applies your case.
Single File Installation:
1. If you are going to do a single
file installation, launch Odin3
v3.07.exe as administrator and
connect the phone to computer
via USB cable.
2. When the device connections is
established successfully the
ID:COM port at Odin 3.07 turns
blue.
3. Click on PDA button and select
the firmware file with .tar.md5
extension.
4. Do not mess with any other
thing in Odin and click the
“Start” button.
Multi-file Installation:
1. In case you choose to install a
multi-file firmware, run Odin3
1.84.exe as administrator and
connect your phone to PC while
it is in Download mode.
2. When the device is connected,
the ID:COM will turn yellow.
3. Make sure that “Re-Partition”,
“Auto Reboot” and “F Reset
Time” options are checked on
Odin.
4. Now click on PIT button and
select the .pit
file: cooperve_0623.pit
5. Then click the PDA button and
select the file with CODE in its
name.
6. Click Phone and select the file
with MODEM in its name.
7. Click on CSC and select the file
with CSC in its name.
8. Finally hit the “Start” button on
Odin and let the installation
finish.
The installation will take just a few
minutes and when it is done your
phone will reboot automatically. The
first boot usually takes longer time
so a little patience is required. When
the phone boots, check the firmware
version from Settings> About on
your Galaxy Ace S5830i. Enjoy the
new firmware. Cheers! :beer:
Sent from my GT-S5830i using xda app-developers app
we already have unbrick tutorial..
any help is appriciated...but please search before u post...
there is already a guide in general section stickies...
Sent from my GT-S5830i using xda app-developers app
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.
Sent from my GT-S5830i using xda app-developers app
brijeshep said:
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Had a bricked bootlooped s5830i laying somewhere, it is fixed now! thanks!
Cant unbrick
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
FirsThink2000 said:
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
Click to expand...
Click to collapse
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...
Sent from my Ace-i
Hitesh2626 said:
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...
Sent from my Ace-i
Click to expand...
Click to collapse
Hi! I was try it, and its works!!! TNX A LOT!!!!
FirsThink2000 said:
Hi! I was try it, and its works!!! TNX A LOT!!!!
Click to expand...
Click to collapse
Don't just say thanks, hit his thanks button! :silly:
odin3 1.84 stuck at <ID:0/005>setupconnection...
not working
It still isn't working .i had tried single firmware and my phone is still bootlooping!!
Flash013 said:
It still isn't working .i had tried single firmware and my phone is still bootlooping!!
Click to expand...
Click to collapse
If you flashed firmware then enter stock recovery wipe data cache.
:: Freedom... ::
ChelebiTech said:
If you flashed firmware then enter stock recovery wipe data cache.
:: Freedom... ::
Click to expand...
Click to collapse
I already did that ...it didn't help!
hello,
my galaxy ace is from ksa region can I flash india region firmware does it work r not
it will help me a lot plz do reply me fast
aakifnouman said:
hello,
my galaxy ace is from ksa region can I flash india region firmware does it work r not
it will help me a lot plz do reply me fast
Click to expand...
Click to collapse
Yes it will work
Sent from my GT-S5830i using xda app-developers app
Hitesh2626 said:
Yes it will work
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
thank you...... u saved my time
well I don't know more about Samsung devices so one more doubt
are there any chances to install custom kernels in s5830 and s5830i
if yes then how to flash
is the procedure is like sony devices or different on unlocking the bootloader
aakifnouman said:
thank you...... u saved my time
well I don't know more about Samsung devices so one more doubt
are there any chances to install custom kernels in s5830 and s5830i
if yes then how to flash
is the procedure is like sony devices or different on unlocking the bootloader
Click to expand...
Click to collapse
Yes their are some Kernels for both model ,for flashing them just the steps are given in there Original posts they are simple just need to flash them via CWM
Sent from my GT-S5830i using xda app-developers app
Help me
I try to do what you said above, but Odin has to step it
<ID:0/004> NAND Write Start!
<ID:0/004> BcmCP.img
<ID:0/004> boot.img
<ID:0/004> system.img
I attached a picture to see more precisely. What should I do not get any phone in recovery mode (Power On + Volume Up + Home).
HELP ME.
Works great. +1
hey man,
im a newbie here, can you help me unbrick my galaxy ace s5830i , ived looked at several how to tutorials but im just haveing a problem on finding an australian stock rom for my phone! , please help , it would be a pleasure
Please help!
Hi guys,
I'm a newbie, and I decided to root my phone yesterday. Once it was rooted successfully, i tried flashing a couple of ROMS (Ace of spades & Slimbean) and both didn't work because of an rror in the file. I then downloaded Razodroid 2.5, and insatlled it (after installing CWM 5), it said installation complete and i tried to reboot my phone, but its stuck on the logo screen. I've looked at so many different tutorials to unbrick it, downloaded all the different setups needed, but the problem is that it just won't go into recovery.
If i press down all the buttons, the logo comes on once, and then just stays blank for as long as i hold the buttons down, and if i let go of the buttons the logo comes up again and stays there.
I tried doing it through ODIN, but if it won't go in to recovery mode how do i get it to work? It doesn't even connect to the computer.
Please help me, I am really upset and frustrated by this, and no longer have a phone. I am at my wits end. Please tell me how to fix this.
Related
Hi All
First of I would like to thank you all for having me on your forum.
Second, I live in South Africa, I have a Samsung Galaxy S3 and my service provider is Vodacom.
I am trying to root my device.
I did manage to get into the "Downloading" Mode and using Odin I managed to install the "clockworkmod"
The next step is to boot into recovery mode (Press and hold Volume Up, Home Button & Power Button) but my S3 does not want to go into recovery mode. When I follow the steps it freezes on The Galaxy Logo.
I really want to root my device to use ALL of the awesome stuff you guys develop.
Thank You in advance.
Only hold vol up + home + power until you see the white galaxy s3 writing then release
Sent from my GT-I9300 using xda premium
Hi
Thank You for the Reply.
I did only hold it down until the logo pops up and then I released.
It still freezes. I have tried holding it in for longer.
I have checked the net and came across different methods and that did not work.
Could it be that Vodacom changed how it goes into recovery mode?
I would say flash an open fw through Odin. *2767*3855# to clean phone from obsolete data. Make sure to backup what you need. Flash CF through Odin.
Boot to recovery through cwm app.
Sent from my GT-I9300 using xda premium
Hi
Thank You for the reply.
I am very sorry if I appear stupid, but is there somewhere where I can get Step by Step instructions?
Thank You
go here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1#regiona
given that you have international i9300 downlolad on from the link above. extract it and it will be in tar or tar.md5 extension.
go here http://forum.xda-developers.com/showthread.php?t=1695238 and download ODIN, put extracted tar that you downloaded from sammobile at PDA section of Odin do not check anything else in Odin.
put device in download mode by pressing vol down+home+ power on, press vol up to acknowlede the warning.
connect device. before pressing Start make sure nothing from Kies program is running.
press start.
wait till it is over and phone reboots.
then *2767*3855#
wait till reboot.
go again at the second link i gave you and download latest CF root.
put it in Odin again at PDA section. put device in download mode connect. press start. wait till reboot. you are rooted. to boot in recovery select cwm app that is in appdrawer and select to boot in cwm.
flash yhe roms that you want.
Try "tool kit" from mskip. Step by step guide.very easy.
u just Dl. From links above and use tool kit to backup and flash.
all root and recovery tools are included.only full firmware is not included
SupTech86 said:
Hi
Thank You for the reply.
I am very sorry if I appear stupid, but is there somewhere where I can get Step by Step instructions?
Thank You
Click to expand...
Click to collapse
Another way is to download Rom toolbox from market. Once installed go to manage roms and click on reboot recovery.
elevation_2 said:
Another way is to download Rom toolbox from market. Once installed go to manage roms and click on reboot recovery.
Click to expand...
Click to collapse
Rom toolbox requires root. He is not rooted yet.
Sent from my GT-I9300 using xda premium
Just got mine from Vodacom and it happily goes into recovery mode with vol + home + power combo, sure this doesnt help you but there you go
mariosraptor said:
go here http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9300&r=1#regiona
given that you have international i9300 downlolad on from the link above. extract it and it will be in tar or tar.md5 extension.
go here http://forum.xda-developers.com/showthread.php?t=1695238 and download ODIN, put extracted tar that you downloaded from sammobile at PDA section of Odin do not check anything else in Odin.
put device in download mode by pressing vol down+home+ power on, press vol up to acknowlede the warning.
connect device. before pressing Start make sure nothing from Kies program is running.
press start.
wait till it is over and phone reboots.
then *2767*3855#
wait till reboot.
go again at the second link i gave you and download latest CF root.
put it in Odin again at PDA section. put device in download mode connect. press start. wait till reboot. you are rooted. to boot in recovery select cwm app that is in appdrawer and select to boot in cwm.
flash yhe roms that you want.
Click to expand...
Click to collapse
Thank You Very Much
It worked! Now I am rooted thanks to You.
Really Thank You
Thank You all Very Much for the help and input.:good:
Just a question: What would you say is the best performance, Stable ROM out there?
Thank You
You are welcome. I am on wanamlite 1.5 and ninphetamine 1.2.0 kernel. Very good battery and as always wanam makes very stable and bug free roms.
Sent from my GT-I9300 using xda premium
Thank You
Where can I download it from.
The "Rom Manager" in playstore, Can this also install the wanamlite 1.5?
Thank You
http://forum.xda-developers.com/showthread.php?t=17058664
just try and read some before flashing. and Always search the XDA forum for what you want. do not expect everything always from someone.
remember to read everything before trying to flash and always backup backup backup.
i do not use rom manager for flashing and backup. in Clockworkmod I Trust!!! lol
A little late..
It's too late now but you could have just opened up terminal emulator and typed
su
reboot recovery
I downloaded the sgs international toolkit 6.0.0 and on step 9 my phone was suppose to reboot, and it turned off but i can't get to reboot no more. Is there anyway i can recover it?
STORMER3000 said:
I downloaded the sgs international toolkit 6.0.0 and on step 9 my phone was suppose to reboot, and it turned off but i can't get to reboot no more. Is there anyway i can recover it?
Click to expand...
Click to collapse
I can go into recovery mode, when I click on reboot system now, its not powering on??
i had flashed Rafael.Baugis kernel on my s5830i
now i want to go back to stock kernel as i m facing issues with my touch screen
cn ne1 help with with this
coz i want to give d ph to samsung service center
andy_android said:
i had flashed Rafael.Baugis kernel on my s5830i
now i want to go back to stock kernel as i m facing issues with my touch screen
cn ne1 help with with this
coz i want to give d ph to samsung service center
Click to expand...
Click to collapse
Download firmware on samfirmware
Flash via Odinv3.07
With Odin3 v1.87:
1. Put the file in PDA section, or split it with SplitFus and put the:
Code:
PDA in PDA.
MODEM in PHONE.
CSC in CSC.
2. Tick "Re-Partition" and "Phone Bootloader Update", make sure that "Auto Reboot" and "F. Reset Time" are also checked, and "Flash Lock" and "Phone EFS Clear" NOT !!!!!
3. Put the PIT file in PIT section.
4. Connect your phone to your computer and go into Download Mode (Vol-up + Vol-down + Power).
5. Click "Start!".
6. WAIT FOR THE LEFT ABOVE SQUARE UNTIL IT GET YELLOW WITH "PASS!", BEFORE YOU DISCONNECT YOUR PHONE FROM YOUR COMPUTER !!!!!
Click to expand...
Click to collapse
With Samsung Kies:
I don't know and don't ask me how !!
Click to expand...
Click to collapse
Sent from my GT-S5830i using xda premium
RubenStauttener said:
With Odin3 v1.87:
With Samsung Kies:
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
Why using Odin 1.87
When we have Odin 3.07
Which does not require multi package files
andy_android said:
i had flashed Rafael.Baugis kernel on my s5830i
now i want to go back to stock kernel as i m facing issues with my touch screen
cn ne1 help with with this
coz i want to give d ph to samsung service center
Click to expand...
Click to collapse
download Samsung KIES and odin and then pda.tar
instal your divice in your pc with kies and then conect the usb put volume up and down and power buton
and then open the pda.tar in pda
(i can't give you link but you can find easy.
RubenStauttener said:
With Odin3 v1.87:
With Samsung Kies:
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
can i directly put d md5 file dwlded from samfirmware in pda section???
andy_android said:
can i directly put d md5 file dwlded from samfirmware in pda section???
Click to expand...
Click to collapse
Yes but you should have Odin3v3.07
Not Odin3v1.87
http://www.4shared.com/zip/C7LtcIw3/Odin3_V307.html
Can anybody pls give me step by step how to go back stock kernel with links?
I am really noob in samsung phones.
Sent from my Xperia Arc S using Tapatalk 2
Go to section 3 of this thread and read through the guide. Follow the guide carefully and you'll be fine. Good luck http://forum.xda-developers.com/showthread.php?t=1840645
Sent from my Nexus 7 using xda app-developers app
Here it is just go to recovery and apply update from sd card then choose stock kernel.zip then choose modules and reboot enjoy your stock kernel
Gamerz_04 said:
Here it is just go to recovery and apply update from sd card then choose stock kernel.zip then choose modules and reboot enjoy your stock kernel
Click to expand...
Click to collapse
Thank you very much sir it work for my s5830i now i am agine able to get warrenty
thanks....
my phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.
I have downloaded the official firmware from sam mobile.com. But can't Flash through Odin and it is showing write failed in odin. I have a backup of CWM in my SD but to flash it CWm recovery in my phone is not working.
Help me Please............
thanks in adavnce...........
4uavk96 said:
my phone is not booting into stock recovery and it is stuck in boot loop, only download mode is working.
I have downloaded the official firmware from sam mobile.com. But can't Flash through Odin and it is showing write failed in odin. I have a backup of CWM in my SD but to flash it CWm recovery in my phone is not working.
Help me Please............
thanks in adavnce...........
Click to expand...
Click to collapse
Try this let me know what happens
Step 1
1. Flash with ODIN v3.07(Stock Rom Any region) use admin mode for running odin
2. only(PDA , CSC , Modem along with PIT file)
Now if everythinf works fine & download mode is working follow step 2 ( phone will still bootloop don't worry about it but be sure to check if recovery or anything else works after this )
Step 2 :
1. again Flash with ODIN v3.07(Same stock
Firmware used in step 1)
2. now only(Bootloader , CSC , Modem ,PDA) No
PIT File(Important)
Use this pit file dl.xda-developers.com/attachdl/f218...5a8f7a/51ee1c11/1/8/0/4/9/6/1/totoro_0623.rar not official samsung that you got with stock firmware
This should work if not let me know
Sent from my GT-I9082 using xda premium
---------- Post added at 11:44 AM ---------- Previous post was at 11:41 AM ----------
Note if phone boots in recovery after step1 just clear cache & factory reset & check if that works if yes no need for step 2 :thumbup:
Sent from my GT-I9082 using xda premium
Thanks for the response.
I downloaded the official firmware from sammobile.com and when I try to flash through Odin it says write failed!
(I don't know if this is happening because of the usb debugging is not checked in the phone)
I used same Odin which I used to flash my grand with!
Actually the problem started after flashing a Rom from cwm recovery
I wiped the cache and factory reset my device in cwm! And install zip from sd and it installed as usual!
But it got stuck at the start screen.
I get the device name and model only on start screen, and nothing after that!
Now after pressing vol up+power+home no android recovery comes or no cwm recovery comes!!!
Phone is still in 0 binary and Samsung official!!
My only problem is if I hold recovery keys it just reboots again n again!
If I hold download mode keys it boots into download mode but Odin refuses to write the stock Rom
.
Thanks in advance
I am in need of ur help.
Help me please
Sent from my GT-I9082 using xda premium
4uavk96 said:
Thanks for the response.
I downloaded the official firmware from sammobile.com and when I try to flash through Odin it says write failed!
(I don't know if this is happening because of the usb debugging is not checked in the phone)
I used same Odin which I used to flash my grand with!
Actually the problem started after flashing a Rom from cwm recovery
I wiped the cache and factory reset my device in cwm! And install zip from sd and it installed as usual!
But it got stuck at the start screen.
I get the device name and model only on start screen, and nothing after that!
Now after pressing vol up+power+home no android recovery comes or no cwm recovery comes!!!
Phone is still in 0 binary and Samsung official!!
My only problem is if I hold recovery keys it just reboots again n again!
If I hold download mode keys it boots into download mode but Odin refuses to write the stock Rom
.
Thanks in advance
I am in need of ur help.
Help me please
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
What version odin are you using
For old handset's use v1.85 or similar
Latest odin does not work properly with galaxy y / ace series
Sent from my GT-I9082 using xda premium
Thanks it worked
What an Idea sirji
Thank you
I am a fan of yours from now!!!
Thanks a lot:thumbup:
Sent from my GT-I9082 using xda premium
4uavk96 said:
Thanks it worked
What an Idea sirji
Thank you
I am a fan of yours from now!!!
Thanks a lot:thumbup:
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
Bro change title to solved :thumbup:
Sent from my GT-I9082 using xda premium
Ya sure
Sent from my GT-I9082 using xda premium
4uavk96 said:
Thanks it worked
What an Idea sirji
Thank you
I am a fan of yours from now!!!
Thanks a lot:thumbup:
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
how did you do it?? can you please tell me step by step?
Please give me a step by step tutorial that how you did that?
boot loop problem in iball andi 4.5q
Dear XDA admin,
last week i rooted my device. I tried to install font found in system folder by using ifont app. After the restart, mobile got stuked into the animation screen, not going further. After searching internet, i did removing battery & insert battery after 30s, wipe cache/factory reset, wipe partition. After did all the things, my phone got stucked into animation screen. i'm a noob. i dont have much ideas about android hacking so that i didnt install any TWRP &CWM recovery. i didnt take backup also. when i hold vol + , Power & Home button, mobile go into android system recovery <3e>, here i tried to update rom got from xda, but it said installation aborted. After i installed adb tools, mobile responding the adb. From adb sideload i sent rom to mobile., but after reboot again it stucked into animation screen. so please kindly help me to rectify this problem.:crying::crying::crying::crying:
my mobile iball andi 4.5q
MT6577
512MB ram
regards
rafiq
[email protected]
please help the link is not working... my problem is same the the first post (
SOLVED!!!
Hello, guys, i've finally made it!
Worked for me with firmware S6102XELAA (got from firmware.sgh.ru )
Used Odin3 v1.85
Try this combination
Samsung phone doesn't boot up!
My Samsung GT-I9082 stopped booting while trying to upgrade to OS 4.2. It cannot boot into recovery mode, but can enter the download mode. The samsung (first pop up screen) just keep blinking when I turn on the phone. Don't know what to do. I need your help please. Thanks house.
plz help me i am stuck on the first screen when i tried installing ios ROM for y but my device was y duos so it didn't run then I tried to go back using nandroid backup trying new Roms but couldn't ago further i had boot loops too. I only know the basics learned from the internet and also my battery wont charge it shows the battery and the loading animation in it but it wont go any further Plz help me..
Thanks in advance
hi all, ive downloaded this custom rom (xaiomi rom for samsung galaxy s4 gt-i9505) and ive followed the step by step to install this new rom (yep, im still a noob to this) and now my phone seems to be stuck on the start up. im not sure what i did wrong because i made sure the rom was for my device. i used CWM to install it via ROM manager and now its stuck, i done what it told me to do like do a factory reset (i done that with cwm) and backed up all my data with TIBU but its just stuck, any ideas on what i should do? ive tried the battery pull and tried to boot into cwm recovery but it says in little blue writing *booting* or something like that but then it just returns to start up and freezes :/ thanks in advance
Please help asap!!!
please help me because i dont have a computer and im at my friends house leaving soon and i want to fix this before i go!!!!!
Get a stock rom and flash it via odin.
1) download Odin
2) download your stock rom
3) boot into download mode by holding volume down+power
4) connect the phone to your pc
5) where Odin has the PDA button, click and add your stock rom
5) click start.
If your computer picks up your phone, Odin will say "connected" and show yoyr device.
Hope this helps.
Sent from my SHV-E210S using Tapatalk 2
SeraphSephiroth said:
Get a stock rom and flash it via odin.
1) download Odin
2) download your stock rom
3) boot into download mode by holding volume down+power
4) connect the phone to your pc
5) where Odin has the PDA button, click and add your stock rom
5) click start.
If your computer picks up your phone, Odin will say "connected" and show yoyr device.
Hope this helps.
Sent from my SHV-E210S using Tapatalk 2
Click to expand...
Click to collapse
does it matter what odin i use?!?!?!
phattpro1 said:
does it matter what odin i use?!?!?!
Click to expand...
Click to collapse
Nope
Hi every one
My freezing problem after the update 4.3 all I got black screen with samsung word :crying::crying::crying:
Can any one help me ?
Factory reset, reflash -search and read.
My English is so bad can you help me cause I get lost on search
Maybe if you give some details someone can help you.
Is your s3 rooted? If yes which ROM and kernel are you using? How did you update to 4.3?
Desert Cheetah said:
My English is so bad can you help me cause I get lost on search
Click to expand...
Click to collapse
Phone Freezes
http://forum.xda-developers.com/showthread.php?t=2133401
chandnit said:
Maybe if you give some details someone can help you.
Is your s3 rooted? If yes which ROM and kernel are you using? How did you update to 4.3?
Click to expand...
Click to collapse
NOT rooted I'm using official ROM and it's phone update from samsung
Choices
One factory reset
Two flash stock rom via Odin .
Three take it to a Samsung service centre .
I solved it
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
I used this link
Code:
sammobile.com/firmwares/3/?download=25529
thanks all