Related
have anyone use this external battery pack for their samsung tab? Will it work for the tab 10.1? any recommendation on which to buy for our tab 10.1?
Thanks
http://www.amazon.com/New-Trent-iDual-Port-IMP50D-Blackberry/dp/B003690Q42/ref=pd_cp_e_1
I'm not sure if it will because I know for a fact that the USB AC adapter that ships with the iPad 2 does not work with the Samsung USB cable for charging (well, it kinda does, but its that slow trickle charge). I figure that the means that both companies use to get the extra juice flowing over the USB cable are different somehow.
Suntarus said:
I'm not sure if it will because I know for a fact that the USB AC adapter that ships with the iPad 2 does not work with the Samsung USB cable for charging (well, it kinda does, but its that slow trickle charge). I figure that the means that both companies use to get the extra juice flowing over the USB cable are different somehow.
Click to expand...
Click to collapse
It is. You can get a charging adapter off of DealExtreme, or make one yourself (read the "make your own cables" thread in Accessories, and look at the Universal Charging schematic)
I have a cigarette lighter USB adapter that kicks out 1500 mAhs, and it's enough to charge the Tab 10.1. Since this thing has more than that on tap, it's a fairly safe bet that it will be able to charge it as well.
..
thanks for the info guys. I did order charging adapter cable from dealextreme. I'm going to order this external battery pack and see. Should i get the 5000mAh or the 11000mAh?
Has anyone found a portable Battery pack that we can use on the TF? I have several that I have used for my iPhone and my old iPad2 but all are only 5v. is there one out there that can charge out TF or is the keyboard dock the only way to go for extra Battery?
There are several battery packs used for notebook computers that will work listed on Amazon. Just be sure they have a 12Volt output. EverReady had as battery pack that will also work but you will need an adapter provided by them. The key is that you need an output of 12 to 15 volts to charge the TF or Keyboard. You might read Devcake's post on a DIY charger for the TF as information on the voltages required to charge the TF. There is also a post on external batteries that might help.
hshoem1
By chance do you have a link to the EverReady battery pack? I would like to see it
hshoem1 said:
There are several battery packs used for notebook computers that will work listed on Amazon. Just be sure they have a 12Volt output. EverReady had as battery pack that will also work but you will need an adapter provided by them. The key is that you need an output of 12 to 15 volts to charge the TF or Keyboard. You might read Devcake's post on a DIY charger for the TF as information on the voltages required to charge the TF. There is also a post on external batteries that might help.
hshoem1
Click to expand...
Click to collapse
I have an XP8000 from Energizer, and work perfectly.
w w w.energizerpowerpacks.com/us/products/xp8000/
You will need a conector for Asus (Willy cable WI15) from them. You will have two free tips a year for the life of product
By any chance do you know the tip number?
The cable you note doesn't appear to connect directly to the Transformer.
What setup are you using to connect to the Transformer?
Thanks
steve
The cable it's a Female USB with 16V output. You need the Asus cable.
xp8000
I looked in the web site and it is expensiver than Asus keyboard!
alberteske said:
I looked in the web site and it is expensiver than Asus keyboard!
Click to expand...
Click to collapse
May as well get the keyboard then xD. Thats the whole point of it being a transformer anyways
RojoNinja said:
May as well get the keyboard then xD. Thats the whole point of it being a transformer anyways
Click to expand...
Click to collapse
Or get both, even better
I just saw this while I'm looking for a battery pack.
On a german page I found this interesting:
w w w.intecro.de/XTPower-MP-16000-Powerbank-mobiler-Akku-mit-16000mAh-fuer-Laptop-Handy-iPhone-iPod-iPad-PDA-MP3-Player-mit-20-Adaptern
(can'f find an english page for this product)
Could I use this one by using an adapter?
I just got an Anker Astro3 10000mAh battery pack. I plan to use it while camping this summer, mainly to charge a phone, but occasionally to charge my tablet.
It is intended to charge 5V USB devices, and has two USB ports. It also has a 12 volt port. The adapters for the 12 volt port, of course, do not work with USB or the Transformer. So I made an adapter, and I am good to go now for charging the tablet.
The battery pack charges from a 12 volt wall charger. I have also made an adapter to charge it from the 12 volts on my motorcycle. So I will be charging it from the motorcycle during the day when riding, then using it to charge my devices in the evening at the camp. I've already tried it a couple of times, and it worked well.
I tried to charge the battery pack using a solar panel, but the solar panel was far too wimpy. It was like trying to run a house air conditioner from a penlight battery. It may make you feel good to try it, but it isn't going to do much.
So far so good. This is very close to what I need.
The issues I have had to work around are:
1) I want to also charge an in helmet bluetooth intercom from the USB port. But the charge current is so low, the battery pack auto powers off, thinking nothing is plugged in. Not a big deal because I can plug in my phone at the same time. That keeps it turned on until everything is charged, then it auto shuts down.
2) When I charge the Asus Tablet, it doesn't appear to auto shut down. Just the opposite of #1, it looks like the load stays high enough to never shut down when charging the tablet. This may not really be true, as I have only tried it a couple of times. Also, it isn't good for much more then one and a half charges of the tablet, as expected.
3) You need to figure out your own harness to get the 12 volts to the tablet.
4) No charge cable for a car. I mean this is rated for an input of like 10 to 15 volts, or some such. This thing is GREAT for charging portable devices. Charging it from a car is as simple as a cable, but there isn't one.
Over all this charger is a winner. At right around $55 US, I recommend it, if you can fabricate a plug for charging the Transformer.
Try a 12V UPS type battery along with a 2A fuse and adapters. It only costs about $20 or so. Plan on using only 50% of its capacity and recharge often to get the most life out of it.
Someone posted this product on another post
http://www.sobuying.com/products/Solar-Charger-For-Notebook,-Ipad,-tablet-pc,-Cell-phone,-MP3,-Laptop-11200mAh.html
May suit your needs
NiHaoMike said:
Try a 12V UPS type battery along with a 2A fuse and adapters. It only costs about $20 or so. Plan on using only 50% of its capacity and recharge often to get the most life out of it.
Click to expand...
Click to collapse
For me, this is actually what I use now. But it has issues.
One is simply that it is large. I carry it in the trailer that I tow behind the motorcycle, so it is OK, but a bit too large and heavy. It is a gel cell that has about a 48 WattHr capacity. LiIon has a a lot less and weight. In this case, it has about the same capacity, in a very small light weight package.
The other problem is charging the lead acid battery is an issue. I need to carry a AC charger and find AC when camping. I put a diode/resistor combo in the trailer and tapped off of the taillights. but by the time the weak motorcycle voltage gets to the taillights, add in the diode and other losses, and I'm lucky to see 13 volts at the battery. Not enough to charge it very well. The LiIon pack I use has the supply built in to charge properly from +12.
So I've tossed the lead brick battery (literally) and upgraded to a portable LiIon pack. So far so good.
This is what I use "Portable 12V DC USB 5V Rechargeable Lithium Li-ion Battery Pack for CCTV Camera" search on ebay, you can get one up to 13AH
I got a 3.8AH version for $16 , Dimension: 9.2cm X 6.0cm X 3.0cm
Outout rated 5V (5.8AH) and 12.8V (3.8AH)
small modification because the charger is NON-US wall plug, I just pull the plug pin out and add in a regular power cord cut off from an old appliance
Keep the USB plug for 5V use, cut the 12V DC cable and connect it to a female USB cable (pin 1 and pin 4) , then you can plug in the Asus usb/charge cable directly and charge or power the Asus
...
I bought an original docking station from Dell with HDMI, Mini USB and Line out... but it came with no power cable... Some one can clarify wich is the voltage and current rating for this docking station?
The dock should be able to use the Streak's data cable, plugged into the AC adapter, since the dock will.charge the unit.
I bought this hdmi cable from amazon: http://www.amazon.com/gp/product/B00K61OB6C/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I hooked up the tab to the tv, cranked up netflix and nothing. I plugged in the power adapter and got a picture. So needs charger to plugged in to work. I wasn't real keen on the output, but was only testing for connectivity. Might come back and edit after I have chance to adjust settings.
Today, I plugged the cable into the second hdmi port on my tv and it does mirror the tab display. Good response time too.
The charger is necessary but it does not charge the Tab. Left it plugged in and battery was down to 38% before i noticed.
Maybe a hardware error? Because under features it's described that it will charge your device...
burningstep said:
Maybe a hardware error? Because under features it's described that it will charge your device...
Click to expand...
Click to collapse
Probably not a hardware error. I'm on my 3rd dongle that's supposed to charge your tablet while using connected devices. The latest is this one: http://www.amazon.com/E-More%C2%AE-Multi-functional-Connection-Reader-Samsung/dp/B00K80C9CE/ref=sr_1_8?ie=UTF8&qid=1403104007&sr=8-8&keywords=HDTV+HDMI+Adapter+Cable+USB+OTG+Card+Reader
Everything works except for charging the tablet. Have a red X on the charging symbol while the battery continues to drain. It does charge the tablet while it's off. I have a power hungry Tab Pro 12.2 that has trouble maintaining a charge while playing a couple games with the stock 2 amp charger. I'm beginning to think that none of the HDMI dongles out there are capable of delivering the current necessary to run the larger tablets.
Ah, I see. It's because not enough power through the micro usb. You need 2A but this adapter's only delivering 1A.
It seems, there a no adapters with 2A...
I have a ton of usb chargers gathered over the years. Largest i have is only 5.1 volts. Tab has a large output. Wonder if other devices could be damaged using it or is output regulated by draw of whatever it is attached to? At any rate, i don't think any of the dongles or otg cables have a power source other than what is supplied by the tabs adapter. So are you thinking it is an issue with the pin configuration on the adapter? It is a 11 pin connector. Sure wish there was 1 standard for everyone instead of everyone having their own.
Sent from my LG-D959 using XDA Premium 4 mobile app
It's not limitated by the pins, there are just for more or less possibilities for an interchange (at least a salesman told me that). It's limited by the inside electronical components. Maybe anybody out there to explain it better or correct my words?
If I remember correctly (it's been a couple years since I tested it), my S3 required the Samsung charger + Samsung wire hooked up to the HDMI (I have the Samsung HDMI adapter) to charge the device while mirroring the screen. I tried it with a more powerful power adapter (2.1 amps vs Samsung 1.x amps) and generic wire but the phone would lose power over time. I could even charge the phone while mirroring if I used a generic Samsung wall charger and Samsung cord that was listed as 0.8 amps.
I bought the official Samsung one a few weeks ago and it is working fine, it also charges the device while using it but you have to connect a charger to the MHL-HDMI adapter.
Sadly I recently flashed CM11 on my TabPRO 10.1 and now the adapter doesn't work anymore. I get picture but no sound Was so happy about getting CM11 official on my device, but this feature is something I can't live without so I'm going to have to hop back to stockbased
HDMI doesn´t work
Hi guys! I´ve bought this one adapter dhgate.com/product/1-1-mhl-11-pin-micro-usb-to-hdmi-cable-hdtv/163941539 I know is not the original one but doesnt work!!!! I did all the steps but nothing. Any idea?? I have installed the original ROM on my galaxy tab t520. I need help!!! Thanks
Hey everyone, so just reading all the comments regarding the HDMI adapter not charging your tab while it is plugged in with the charger, I have also had issues with it and also with my Note2 and the Samsung Smart Dock I use with it. But I did however manage to find the solution to why it would not charge while on the HDMI dock that is connected to my T.V. It seams that if you plug either the Smart Dock or even the HDMI connectors to the HDMI cable first then plug in the charger it will show its charging but will eventually lose charge while outputting an HDMI output, instead, you need to first plug in the charger cable into your HDMI adapter, then plug it into your phone or tablet and finally plug in the HDMI cable into the adapter, I have found this to be the way to keep my phone and tablet charging while also having the HDMI output connected to my T.V..
Hope this helps .
Recently bought the OEM Nexus Wireless charging station on clearance for 9.99!! Over the moon, right? Wrong! Comes with a UK wall plug and a shoddy chinese knockoff LG design wall plug. Long story short, I am unable to draw enough power from the outlet to charge the station? Any idea of where to buy just that one piece of accessory here in the US that goes from the square box into the wall? Or do I have to buy an entirely new charger with 1.8 amp power or more? Any suggestions for a charger? Thanks in advance :good::good:
No answer yet from anyone here on XDA? All I need to know from anyone who has used the exus wireless charger is whether you know of any aftermarket adapter that draws enough amperage (electricity) to charge the base? As my original post mentioned, I was sent the UK wall plug instead of the US. For those who has this product will know my problem which is this:
the light does not turn blue when I plug in the adapter. It is red, which means the adapter is not drawing enough power from the outlet. I need to find a US wall plug/charger that draws enough power to charge the station.
Does it not have a USB connection? You should be able to plug into any USB port or adaptor.
I get the original for the Blackberry Play and they are a design where the power blades fold into the charger and it's a square black box. They can often be found on eBay for $6